Sorry.
Like Bill said, use the the '93's instructions by Doug:
If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg

Then carefully remove the lower screw by inserting a thin phillips
driver here http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg

You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg

-DougW

--
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Cappy2112 wrote:
>
> Thanks again- but do you have any references for 98 Jeeps ?
> This page is for 99 and onward, and the headlamp assy is quite
> different.
> My headlamp only has 1 bulb, not the 5 as in the picture.
>
> As such, now I have the headlamp out, the turn signal (which is what
> needs to be replaced) is in the wraparound assembly, again, with no
> visible screws/fasteners.
>
> This is what needs to come out, so I can replace the turn signal bulb
>
> L.W.(Bill) ------ III wrote:
> > Bookmark: http://www.wjjeeps.com/jmenu.htm
> > God Bless America, Bill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Cappy2112 wrote:
> > >
> > > Great
> > > Thank you !!
> > >
> > > Any idea how to get the speaker grills off of the front Left & Right
> > > speakers?
> > > I have the Infinity Gold system- and I think my speakers are shot or
> > > the crossover is fried.
> > >
> > > Do I have to take the door panel off ?

 

Sorry.
Like Bill said, use the the '93's instructions by Doug:
If it's like the 93 then you take out this screw for the
side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg

Then carefully remove the lower screw by inserting a thin phillips
driver here http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg

You can then take out the lower screw that holds the lamp
in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg

-DougW

--
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Cappy2112 wrote:
>
> Thanks again- but do you have any references for 98 Jeeps ?
> This page is for 99 and onward, and the headlamp assy is quite
> different.
> My headlamp only has 1 bulb, not the 5 as in the picture.
>
> As such, now I have the headlamp out, the turn signal (which is what
> needs to be replaced) is in the wraparound assembly, again, with no
> visible screws/fasteners.
>
> This is what needs to come out, so I can replace the turn signal bulb
>
> L.W.(Bill) ------ III wrote:
> > Bookmark: http://www.wjjeeps.com/jmenu.htm
> > God Bless America, Bill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Cappy2112 wrote:
> > >
> > > Great
> > > Thank you !!
> > >
> > > Any idea how to get the speaker grills off of the front Left & Right
> > > speakers?
> > > I have the Infinity Gold system- and I think my speakers are shot or
> > > the crossover is fried.
> > >
> > > Do I have to take the door panel off ?

 

I finally got the turn signal bulb out- but it still worked.
I've re-connected everything and the turn signal works fin noe.
NMust have been a lose connection.
Curse GM for using torx screws.

Thanks for all the info- everyone

L.W.(Bill) ------ III wrote:
> Sorry.
> Like Bill said, use the the '93's instructions by Doug:
> If it's like the 93 then you take out this screw for the
> side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg
>
> Then carefully remove the lower screw by inserting a thin phillips
> driver here http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg
>
> You can then take out the lower screw that holds the lamp
> in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg
>
> -DougW
>
> --
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cappy2112 wrote:
> >
> > Thanks again- but do you have any references for 98 Jeeps ?
> > This page is for 99 and onward, and the headlamp assy is quite
> > different.
> > My headlamp only has 1 bulb, not the 5 as in the picture.
> >
> > As such, now I have the headlamp out, the turn signal (which is what
> > needs to be replaced) is in the wraparound assembly, again, with no
> > visible screws/fasteners.
> >
> > This is what needs to come out, so I can replace the turn signal bulb
> >
> > L.W.(Bill) ------ III wrote:
> > > Bookmark: http://www.wjjeeps.com/jmenu.htm
> > > God Bless America, Bill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > Cappy2112 wrote:
> > > >
> > > > Great
> > > > Thank you !!
> > > >
> > > > Any idea how to get the speaker grills off of the front Left & Right
> > > > speakers?
> > > > I have the Infinity Gold system- and I think my speakers are shot or
> > > > the crossover is fried.
> > > >
> > > > Do I have to take the door panel off ?

 

I finally got the turn signal bulb out- but it still worked.
I've re-connected everything and the turn signal works fin noe.
NMust have been a lose connection.
Curse GM for using torx screws.

Thanks for all the info- everyone

L.W.(Bill) ------ III wrote:
> Sorry.
> Like Bill said, use the the '93's instructions by Doug:
> If it's like the 93 then you take out this screw for the
> side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg
>
> Then carefully remove the lower screw by inserting a thin phillips
> driver here http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg
>
> You can then take out the lower screw that holds the lamp
> in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg
>
> -DougW
>
> --
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cappy2112 wrote:
> >
> > Thanks again- but do you have any references for 98 Jeeps ?
> > This page is for 99 and onward, and the headlamp assy is quite
> > different.
> > My headlamp only has 1 bulb, not the 5 as in the picture.
> >
> > As such, now I have the headlamp out, the turn signal (which is what
> > needs to be replaced) is in the wraparound assembly, again, with no
> > visible screws/fasteners.
> >
> > This is what needs to come out, so I can replace the turn signal bulb
> >
> > L.W.(Bill) ------ III wrote:
> > > Bookmark: http://www.wjjeeps.com/jmenu.htm
> > > God Bless America, Bill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > Cappy2112 wrote:
> > > >
> > > > Great
> > > > Thank you !!
> > > >
> > > > Any idea how to get the speaker grills off of the front Left & Right
> > > > speakers?
> > > > I have the Infinity Gold system- and I think my speakers are shot or
> > > > the crossover is fried.
> > > >
> > > > Do I have to take the door panel off ?

 

I finally got the turn signal bulb out- but it still worked.
I've re-connected everything and the turn signal works fin noe.
NMust have been a lose connection.
Curse GM for using torx screws.

Thanks for all the info- everyone

L.W.(Bill) ------ III wrote:
> Sorry.
> Like Bill said, use the the '93's instructions by Doug:
> If it's like the 93 then you take out this screw for the
> side marker http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg
>
> Then carefully remove the lower screw by inserting a thin phillips
> driver here http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg
>
> You can then take out the lower screw that holds the lamp
> in http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg
>
> -DougW
>
> --
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Cappy2112 wrote:
> >
> > Thanks again- but do you have any references for 98 Jeeps ?
> > This page is for 99 and onward, and the headlamp assy is quite
> > different.
> > My headlamp only has 1 bulb, not the 5 as in the picture.
> >
> > As such, now I have the headlamp out, the turn signal (which is what
> > needs to be replaced) is in the wraparound assembly, again, with no
> > visible screws/fasteners.
> >
> > This is what needs to come out, so I can replace the turn signal bulb
> >
> > L.W.(Bill) ------ III wrote:
> > > Bookmark: http://www.wjjeeps.com/jmenu.htm
> > > God Bless America, Bill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > Cappy2112 wrote:
> > > >
> > > > Great
> > > > Thank you !!
> > > >
> > > > Any idea how to get the speaker grills off of the front Left & Right
> > > > speakers?
> > > > I have the Infinity Gold system- and I think my speakers are shot or
> > > > the crossover is fried.
> > > >
> > > > Do I have to take the door panel off ?