Will Honea

Thanks. Unfortunately, high temps and high humidity seem to be
contradictory conditions in Colorado - if it ain't raining the
humidity is in the low teens to single digits, if it is raining it
gets colder than hell instantly.

On Wed, 27 Aug 2003 22:58:32 UTC "Chuck" <kb9kfs@hsonline.net> wrote:

> Harbor Freight undercoating gun. When I did mine they were like $8.00.
> Cheap enough not to clean, just toss and use a new one for each coat. Spray
> a light coat to start, then build up with heavier coats.
>
> Good luck
>
> BTW, high humidity and temps make the best times to shoot, Herc sets up best
> then.
>
> --
> HAV-A-GOOD 1
>
> Chuck
>
> I didn't fight to the top of the food chain to be a vegetarian
> "Will Honea" <whonea@codenet.net> wrote in message
> news:JxX2tWiP5BNp-pn2-SCktRzSI66Th@anon.none.net...
> > What type of sprayer did you use? I'd like to get around to doing the
> > bed of my MJ and I have both a decent compressor and a good airless
> > rig - which would be best for Herculiner?
> >
> > On Wed, 27 Aug 2003 14:54:21 UTC "Chuck" <kb9kfs@hsonline.net> wrote:
> >
> > > Spray on Hurculiner. That's the ticket. Thickness can be built up with
> > > multiple coats. Very even finish that isn't overly rough. I'd do it
> again
> > > in a minute. Looks great and doesn't add that much weight. I used 2
> heavy
> > > coats and it only took half a gallon.
> > >
> > > Good luck
> > >
> > > --
> > > HAV-A-GOOD 1
> > >
> > > Chuck
> > >
> > > I didn't fight to the top of the food chain to be a vegetarian
> > > "Joe" <jo_ratner@yahoo.com> wrote in message
> > > news:NTz2b.10073$jY2.3147@newsread1.news.atl.earth link.net...
> > > > I saw Herculiner in the quadtratech catalog for $100+ per gallon... is
> it
> > > > that good? is it worth it? what brands do you recommend?
> > > >
> > > >
> > >
> > >
> >
> >
> > --
> > Will Honea <whonea@codenet.net>
>
>


--
Will Honea <whonea@codenet.net>

0|||||||0 Ray

I did mine a few weeks ago. Love it! I was always running without the
carpets in and had noticed that my foot had worn a spot to the metal near
the accelerator. Also had some decent scratches in the other footwells and
especially in the rear cargo/seat area. I had a galvanized box made last
winter that fits in the back but leaves room up front for a cooler and I can
put the tonneau cover on over it. I did the tailgate also because the box
doesn't have a door on it and everything I have in it bangs against the
'gate. It seems to also help with reducing the heat from the transmission
'hump'. I will echo a previous poster in saying that it is difficult to
clean out after wheelin'. Oh well....Like it was ever really clean before!

--
Ray
KC9ERO
99 TJ Sport
Chili Pepper Red
3" Suspension Lift
30" BFG/MTs
Ramsey REP8000 Winch
48" Roll-Bar-Mounted Hi-Lift Jack
0|||||||0
"sm3gurpal" <elambeth@hotmail.com> wrote in message
news:88f4ec61.0308271011.4c7558b2@posting.google.c om...
> > I Rhino lined my TJ a few months back. Local guy charged me $400 if I
took
> > everything out of the Jeep except the driver's seat & seatbelt. Did a
great
> > job & looks good. I asked him how much weight he thought that would be
& he
> > said it would only be about 40 lbs or so. Seems fairly lightweight on
the
> > small pieces I had to trim to get the seats and console back in so I'd
guess
> > he's about right.
> >
>
> The driver's seat and seatbelt?!?!?! Why are you herculining the
> front passenger compartment?!?!?! You're not planning on carrying
> your cinder blocks in the diver's footwell, are you?
>
> I'm considering Herculining, but I would only be doing the truck bed
> portion of my vehicle. I don't know about you, but my feet aren't
> abrasive enough to worry about lining anything up front.

0|||||||0 Ray

I did mine a few weeks ago. Love it! I was always running without the
carpets in and had noticed that my foot had worn a spot to the metal near
the accelerator. Also had some decent scratches in the other footwells and
especially in the rear cargo/seat area. I had a galvanized box made last
winter that fits in the back but leaves room up front for a cooler and I can
put the tonneau cover on over it. I did the tailgate also because the box
doesn't have a door on it and everything I have in it bangs against the
'gate. It seems to also help with reducing the heat from the transmission
'hump'. I will echo a previous poster in saying that it is difficult to
clean out after wheelin'. Oh well....Like it was ever really clean before!

--
Ray
KC9ERO
99 TJ Sport
Chili Pepper Red
3" Suspension Lift
30" BFG/MTs
Ramsey REP8000 Winch
48" Roll-Bar-Mounted Hi-Lift Jack
0|||||||0
"sm3gurpal" <elambeth@hotmail.com> wrote in message
news:88f4ec61.0308271011.4c7558b2@posting.google.c om...
> > I Rhino lined my TJ a few months back. Local guy charged me $400 if I
took
> > everything out of the Jeep except the driver's seat & seatbelt. Did a
great
> > job & looks good. I asked him how much weight he thought that would be
& he
> > said it would only be about 40 lbs or so. Seems fairly lightweight on
the
> > small pieces I had to trim to get the seats and console back in so I'd
guess
> > he's about right.
> >
>
> The driver's seat and seatbelt?!?!?! Why are you herculining the
> front passenger compartment?!?!?! You're not planning on carrying
> your cinder blocks in the diver's footwell, are you?
>
> I'm considering Herculining, but I would only be doing the truck bed
> portion of my vehicle. I don't know about you, but my feet aren't
> abrasive enough to worry about lining anything up front.

Chuck

It will just take a little longer then.

--
HAV-A-GOOD 1

Chuck

I didn't fight to the top of the food chain to be a vegetarian
"Will Honea" <whonea@codenet.net> wrote in message
news:JxX2tWiP5BNp-pn2-o8oUMZB0NwZS@anon.none.net...
> Thanks. Unfortunately, high temps and high humidity seem to be
> contradictory conditions in Colorado - if it ain't raining the
> humidity is in the low teens to single digits, if it is raining it
> gets colder than hell instantly.
>
> On Wed, 27 Aug 2003 22:58:32 UTC "Chuck" <kb9kfs@hsonline.net> wrote:
>
> > Harbor Freight undercoating gun. When I did mine they were like $8.00.
> > Cheap enough not to clean, just toss and use a new one for each coat.
Spray
> > a light coat to start, then build up with heavier coats.
> >
> > Good luck
> >
> > BTW, high humidity and temps make the best times to shoot, Herc sets up
best
> > then.
> >
> > --
> > HAV-A-GOOD 1
> >
> > Chuck
> >
> > I didn't fight to the top of the food chain to be a vegetarian
> > "Will Honea" <whonea@codenet.net> wrote in message
> > news:JxX2tWiP5BNp-pn2-SCktRzSI66Th@anon.none.net...
> > > What type of sprayer did you use? I'd like to get around to doing the
> > > bed of my MJ and I have both a decent compressor and a good airless
> > > rig - which would be best for Herculiner?
> > >
> > > On Wed, 27 Aug 2003 14:54:21 UTC "Chuck" <kb9kfs@hsonline.net> wrote:
> > >
> > > > Spray on Hurculiner. That's the ticket. Thickness can be built up
with
> > > > multiple coats. Very even finish that isn't overly rough. I'd do
it
> > again
> > > > in a minute. Looks great and doesn't add that much weight. I used
2
> > heavy
> > > > coats and it only took half a gallon.
> > > >
> > > > Good luck
> > > >
> > > > --
> > > > HAV-A-GOOD 1
> > > >
> > > > Chuck
> > > >
> > > > I didn't fight to the top of the food chain to be a vegetarian
> > > > "Joe" <jo_ratner@yahoo.com> wrote in message
> > > > news:NTz2b.10073$jY2.3147@newsread1.news.atl.earth link.net...
> > > > > I saw Herculiner in the quadtratech catalog for $100+ per
gallon... is
> > it
> > > > > that good? is it worth it? what brands do you recommend?
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> > > --
> > > Will Honea <whonea@codenet.net>
> >
> >
>
>
> --
> Will Honea <whonea@codenet.net>

Chuck

It will just take a little longer then.

--
HAV-A-GOOD 1

Chuck

I didn't fight to the top of the food chain to be a vegetarian
"Will Honea" <whonea@codenet.net> wrote in message
news:JxX2tWiP5BNp-pn2-o8oUMZB0NwZS@anon.none.net...
> Thanks. Unfortunately, high temps and high humidity seem to be
> contradictory conditions in Colorado - if it ain't raining the
> humidity is in the low teens to single digits, if it is raining it
> gets colder than hell instantly.
>
> On Wed, 27 Aug 2003 22:58:32 UTC "Chuck" <kb9kfs@hsonline.net> wrote:
>
> > Harbor Freight undercoating gun. When I did mine they were like $8.00.
> > Cheap enough not to clean, just toss and use a new one for each coat.
Spray
> > a light coat to start, then build up with heavier coats.
> >
> > Good luck
> >
> > BTW, high humidity and temps make the best times to shoot, Herc sets up
best
> > then.
> >
> > --
> > HAV-A-GOOD 1
> >
> > Chuck
> >
> > I didn't fight to the top of the food chain to be a vegetarian
> > "Will Honea" <whonea@codenet.net> wrote in message
> > news:JxX2tWiP5BNp-pn2-SCktRzSI66Th@anon.none.net...
> > > What type of sprayer did you use? I'd like to get around to doing the
> > > bed of my MJ and I have both a decent compressor and a good airless
> > > rig - which would be best for Herculiner?
> > >
> > > On Wed, 27 Aug 2003 14:54:21 UTC "Chuck" <kb9kfs@hsonline.net> wrote:
> > >
> > > > Spray on Hurculiner. That's the ticket. Thickness can be built up
with
> > > > multiple coats. Very even finish that isn't overly rough. I'd do
it
> > again
> > > > in a minute. Looks great and doesn't add that much weight. I used
2
> > heavy
> > > > coats and it only took half a gallon.
> > > >
> > > > Good luck
> > > >
> > > > --
> > > > HAV-A-GOOD 1
> > > >
> > > > Chuck
> > > >
> > > > I didn't fight to the top of the food chain to be a vegetarian
> > > > "Joe" <jo_ratner@yahoo.com> wrote in message
> > > > news:NTz2b.10073$jY2.3147@newsread1.news.atl.earth link.net...
> > > > > I saw Herculiner in the quadtratech catalog for $100+ per
gallon... is
> > it
> > > > > that good? is it worth it? what brands do you recommend?
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> > > --
> > > Will Honea <whonea@codenet.net>
> >
> >
>
>
> --
> Will Honea <whonea@codenet.net>

Ichabod Shagnasti

I plan to keep this one for a long time so I went ahead and lined it for
protection mostly. In my previous TJ, I had taken the carpets out & the
paint quickly wears where you feet rub against it constantly. The Rhino
also helps dissapate the heat a little... without it, that hump get VERY
hot.

The guy did a great job on it... runs all the way up the sides & matches my
charcoal interior perfectly.

"sm3gurpal" <elambeth@hotmail.com> wrote in message
news:88f4ec61.0308271011.4c7558b2@posting.google.c om...
> > I Rhino lined my TJ a few months back. Local guy charged me $400 if I
took
> > everything out of the Jeep except the driver's seat & seatbelt. Did a
great
> > job & looks good. I asked him how much weight he thought that would be
& he
> > said it would only be about 40 lbs or so. Seems fairly lightweight on
the
> > small pieces I had to trim to get the seats and console back in so I'd
guess
> > he's about right.
> >
>
> The driver's seat and seatbelt?!?!?! Why are you herculining the
> front passenger compartment?!?!?! You're not planning on carrying
> your cinder blocks in the diver's footwell, are you?
>
> I'm considering Herculining, but I would only be doing the truck bed
> portion of my vehicle. I don't know about you, but my feet aren't
> abrasive enough to worry about lining anything up front.

Ichabod Shagnasti

I plan to keep this one for a long time so I went ahead and lined it for
protection mostly. In my previous TJ, I had taken the carpets out & the
paint quickly wears where you feet rub against it constantly. The Rhino
also helps dissapate the heat a little... without it, that hump get VERY
hot.

The guy did a great job on it... runs all the way up the sides & matches my
charcoal interior perfectly.

"sm3gurpal" <elambeth@hotmail.com> wrote in message
news:88f4ec61.0308271011.4c7558b2@posting.google.c om...
> > I Rhino lined my TJ a few months back. Local guy charged me $400 if I
took
> > everything out of the Jeep except the driver's seat & seatbelt. Did a
great
> > job & looks good. I asked him how much weight he thought that would be
& he
> > said it would only be about 40 lbs or so. Seems fairly lightweight on
the
> > small pieces I had to trim to get the seats and console back in so I'd
guess
> > he's about right.
> >
>
> The driver's seat and seatbelt?!?!?! Why are you herculining the
> front passenger compartment?!?!?! You're not planning on carrying
> your cinder blocks in the diver's footwell, are you?
>
> I'm considering Herculining, but I would only be doing the truck bed
> portion of my vehicle. I don't know about you, but my feet aren't
> abrasive enough to worry about lining anything up front.

brids5

I left them open. I took masking tape and rolled it backwards around two
fingers to make a tube. Stuck it in the hole and pinched off the tub side.
Then just h'lined over everything. If you do tape off the holes remove the
tape before the h'liner dries. Yeah, I pulled out the seats, belts and
console, but left the roll bar in.
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-7B0B7A.08594927082003@corp.newsfeeds.com...
> In article <hF23b.274319$YN5.186784@sccrnsc01>,
> "brids5" <brids5@mchsi.com> wrote:
>
> > I used Herculiner in my '78CJ7 and its held up great. The only problems
I
> > have is it's hard to get all the dirt and grit out of it after you go
> > wheeling. It is also very abrasive. If you use it on the wheel wells
your
> > back passengers can get scraped up pretty good just trying to hold on.
>
> Excellent insight. Thanks! Anything to add?
>
> Did you leave the drain holes open or Herc over the plugs?
>
> Did you take all the seats and brackets out? Roll bar?
>
>
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----== Over 100,000 Newsgroups - 19 Different Servers! =-----

brids5

I left them open. I took masking tape and rolled it backwards around two
fingers to make a tube. Stuck it in the hole and pinched off the tub side.
Then just h'lined over everything. If you do tape off the holes remove the
tape before the h'liner dries. Yeah, I pulled out the seats, belts and
console, but left the roll bar in.
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-7B0B7A.08594927082003@corp.newsfeeds.com...
> In article <hF23b.274319$YN5.186784@sccrnsc01>,
> "brids5" <brids5@mchsi.com> wrote:
>
> > I used Herculiner in my '78CJ7 and its held up great. The only problems
I
> > have is it's hard to get all the dirt and grit out of it after you go
> > wheeling. It is also very abrasive. If you use it on the wheel wells
your
> > back passengers can get scraped up pretty good just trying to hold on.
>
> Excellent insight. Thanks! Anything to add?
>
> Did you leave the drain holes open or Herc over the plugs?
>
> Did you take all the seats and brackets out? Roll bar?
>
>
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Jeepers

In article <zVz3b.289077$YN5.201630@sccrnsc01>,
"brids5" <brids5@mchsi.com> wrote:

> I left them open. I took masking tape and rolled it backwards around two
> fingers to make a tube. Stuck it in the hole and pinched off the tub side.
> Then just h'lined over everything. If you do tape off the holes remove the
> tape before the h'liner dries. Yeah, I pulled out the seats, belts and
> console, but left the roll bar in.

Thanks!

http://sprite.viptx.net/~moomesa/NEWJEEP.html


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----