Herculiner
08-27-2003, 02:24 PM
#51
Guest
Posts: n/a
Re: Herculiner
Not sure if you're asking me, but.... To apply Durabak, which appears to be
similar to Herculiner, you strip out the tub (natch) then what I did was
carefully sand the entire area to be lined using medium scotch-brite pads.
You then wipe it down thoroughly with Zylene thinner. After that dries you
roll on the Durabak using the textured roller, let each coat dry for 3-4
hours until it's not tacky. I applied three even coats.
One thing to watch out for, it's hard to get the roller to stay pliable
after it's used, even if you soak it in Zylene. I ended up having to run to
the paint store and got 2 replacements, which weren't exactly the same but
worked fine nonetheless.
One other thing, the stuff stinks like Hell for a few weeks afterwards. And
I mean STINKS! I put it on over a year ago and it's now completely odorless.
It's really held up ell and looks great.
This ended up being a day and a half of weekend work, and for the time spent
you may be better off just having the Rhinoliner folks do it for you. Either
way, I think you'll like the results.
"sm3gurpal" <elambeth@hotmail.com> wrote in message
news:88f4ec61.0308271007.60c78108@posting.google.c om...
> > >
> > Yes, there was a special roller (very coarse) to give it the texture.
> > Maybe I didn't have the same stuff as you, but on the can
> > it depicted a truck bed being done.
>
> What type of prep work did you have to do?
similar to Herculiner, you strip out the tub (natch) then what I did was
carefully sand the entire area to be lined using medium scotch-brite pads.
You then wipe it down thoroughly with Zylene thinner. After that dries you
roll on the Durabak using the textured roller, let each coat dry for 3-4
hours until it's not tacky. I applied three even coats.
One thing to watch out for, it's hard to get the roller to stay pliable
after it's used, even if you soak it in Zylene. I ended up having to run to
the paint store and got 2 replacements, which weren't exactly the same but
worked fine nonetheless.
One other thing, the stuff stinks like Hell for a few weeks afterwards. And
I mean STINKS! I put it on over a year ago and it's now completely odorless.
It's really held up ell and looks great.
This ended up being a day and a half of weekend work, and for the time spent
you may be better off just having the Rhinoliner folks do it for you. Either
way, I think you'll like the results.
"sm3gurpal" <elambeth@hotmail.com> wrote in message
news:88f4ec61.0308271007.60c78108@posting.google.c om...
> > >
> > Yes, there was a special roller (very coarse) to give it the texture.
> > Maybe I didn't have the same stuff as you, but on the can
> > it depicted a truck bed being done.
>
> What type of prep work did you have to do?
08-27-2003, 05:51 PM
#52
Guest
Posts: n/a
Re: Herculiner
Yep, someone should archive that thread for posterity. It ranks with
some of the best comedy ever.
On Wed, 27 Aug 2003 13:17:33 UTC "TJim" <jim@ranlet.nospam.com> wrote:
> Heehehee! I had forgotten just how funny that whole thread was! :-D
> Thanks, Jenn, you just made my day!
> ROFLMAO!!!
>
> "jbjeep" <jbjeep@saw.net> wrote in message
> news:tsvnkv46jipqbehds2mhc6rd9n6e36io09@4ax.com...
> >
> http://www.explorerforum.com/forums/...5&pagenumber=1
> >
> > =)
> >
> > Always gives me a good chuckle.
> >
> >
> > On Tue, 26 Aug 2003 13:06:10 -0500, Jeepers <moomesa@INVALIDfnbnet.net>
> wrote:
> >
> > >>In article <3f4b9ea1.1164983328@news.east.***.net>,
> > >> tookie@***.net (Tookie ) wrote:
> > >>
> > >>> On Tue, 26 Aug 2003 08:11:24 -0600, "Gerald G. McGeorge"
> > >>> <gmcgeorge@frontier.net> wrote:
> > >>>
> > >>> >The Durabak I applied has the same little bits of stuff as does
> Herculiner.
> > >>> >Was yours just a smooth coating?
> > >>> >
> > >>> Yes, there was a special roller (very coarse) to give it the texture.
> > >>> Maybe I didn't have the same stuff as you, but on the can
> > >>> it depicted a truck bed being done.
> > >>
> > >>What was it, that one guy called his member, that he got some on?
> > >>Funny.
> > >>
> > >>
> > >>-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> > >>http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> > >>-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
> >
>
>
--
Will Honea <whonea@codenet.net>
some of the best comedy ever.
On Wed, 27 Aug 2003 13:17:33 UTC "TJim" <jim@ranlet.nospam.com> wrote:
> Heehehee! I had forgotten just how funny that whole thread was! :-D
> Thanks, Jenn, you just made my day!
> ROFLMAO!!!
>
> "jbjeep" <jbjeep@saw.net> wrote in message
> news:tsvnkv46jipqbehds2mhc6rd9n6e36io09@4ax.com...
> >
> http://www.explorerforum.com/forums/...5&pagenumber=1
> >
> > =)
> >
> > Always gives me a good chuckle.
> >
> >
> > On Tue, 26 Aug 2003 13:06:10 -0500, Jeepers <moomesa@INVALIDfnbnet.net>
> wrote:
> >
> > >>In article <3f4b9ea1.1164983328@news.east.***.net>,
> > >> tookie@***.net (Tookie ) wrote:
> > >>
> > >>> On Tue, 26 Aug 2003 08:11:24 -0600, "Gerald G. McGeorge"
> > >>> <gmcgeorge@frontier.net> wrote:
> > >>>
> > >>> >The Durabak I applied has the same little bits of stuff as does
> Herculiner.
> > >>> >Was yours just a smooth coating?
> > >>> >
> > >>> Yes, there was a special roller (very coarse) to give it the texture.
> > >>> Maybe I didn't have the same stuff as you, but on the can
> > >>> it depicted a truck bed being done.
> > >>
> > >>What was it, that one guy called his member, that he got some on?
> > >>Funny.
> > >>
> > >>
> > >>-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> > >>http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> > >>-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
> >
>
>
--
Will Honea <whonea@codenet.net>
08-27-2003, 05:51 PM
#53
Guest
Posts: n/a
Re: Herculiner
Yep, someone should archive that thread for posterity. It ranks with
some of the best comedy ever.
On Wed, 27 Aug 2003 13:17:33 UTC "TJim" <jim@ranlet.nospam.com> wrote:
> Heehehee! I had forgotten just how funny that whole thread was! :-D
> Thanks, Jenn, you just made my day!
> ROFLMAO!!!
>
> "jbjeep" <jbjeep@saw.net> wrote in message
> news:tsvnkv46jipqbehds2mhc6rd9n6e36io09@4ax.com...
> >
> http://www.explorerforum.com/forums/...5&pagenumber=1
> >
> > =)
> >
> > Always gives me a good chuckle.
> >
> >
> > On Tue, 26 Aug 2003 13:06:10 -0500, Jeepers <moomesa@INVALIDfnbnet.net>
> wrote:
> >
> > >>In article <3f4b9ea1.1164983328@news.east.***.net>,
> > >> tookie@***.net (Tookie ) wrote:
> > >>
> > >>> On Tue, 26 Aug 2003 08:11:24 -0600, "Gerald G. McGeorge"
> > >>> <gmcgeorge@frontier.net> wrote:
> > >>>
> > >>> >The Durabak I applied has the same little bits of stuff as does
> Herculiner.
> > >>> >Was yours just a smooth coating?
> > >>> >
> > >>> Yes, there was a special roller (very coarse) to give it the texture.
> > >>> Maybe I didn't have the same stuff as you, but on the can
> > >>> it depicted a truck bed being done.
> > >>
> > >>What was it, that one guy called his member, that he got some on?
> > >>Funny.
> > >>
> > >>
> > >>-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> > >>http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> > >>-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
> >
>
>
--
Will Honea <whonea@codenet.net>
some of the best comedy ever.
On Wed, 27 Aug 2003 13:17:33 UTC "TJim" <jim@ranlet.nospam.com> wrote:
> Heehehee! I had forgotten just how funny that whole thread was! :-D
> Thanks, Jenn, you just made my day!
> ROFLMAO!!!
>
> "jbjeep" <jbjeep@saw.net> wrote in message
> news:tsvnkv46jipqbehds2mhc6rd9n6e36io09@4ax.com...
> >
> http://www.explorerforum.com/forums/...5&pagenumber=1
> >
> > =)
> >
> > Always gives me a good chuckle.
> >
> >
> > On Tue, 26 Aug 2003 13:06:10 -0500, Jeepers <moomesa@INVALIDfnbnet.net>
> wrote:
> >
> > >>In article <3f4b9ea1.1164983328@news.east.***.net>,
> > >> tookie@***.net (Tookie ) wrote:
> > >>
> > >>> On Tue, 26 Aug 2003 08:11:24 -0600, "Gerald G. McGeorge"
> > >>> <gmcgeorge@frontier.net> wrote:
> > >>>
> > >>> >The Durabak I applied has the same little bits of stuff as does
> Herculiner.
> > >>> >Was yours just a smooth coating?
> > >>> >
> > >>> Yes, there was a special roller (very coarse) to give it the texture.
> > >>> Maybe I didn't have the same stuff as you, but on the can
> > >>> it depicted a truck bed being done.
> > >>
> > >>What was it, that one guy called his member, that he got some on?
> > >>Funny.
> > >>
> > >>
> > >>-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> > >>http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> > >>-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
> >
>
>
--
Will Honea <whonea@codenet.net>
08-27-2003, 05:57 PM
#54
Guest
Posts: n/a
Re: Herculiner
What type of sprayer did you use? I'd like to get around to doing the
bed of my MJ and I have both a decent compressor and a good airless
rig - which would be best for Herculiner?
On Wed, 27 Aug 2003 14:54:21 UTC "Chuck" <kb9kfs@hsonline.net> wrote:
> Spray on Hurculiner. That's the ticket. Thickness can be built up with
> multiple coats. Very even finish that isn't overly rough. I'd do it again
> in a minute. Looks great and doesn't add that much weight. I used 2 heavy
> coats and it only took half a gallon.
>
> Good luck
>
> --
> HAV-A-GOOD 1
>
> Chuck
>
> I didn't fight to the top of the food chain to be a vegetarian
> "Joe" <jo_ratner@yahoo.com> wrote in message
> news:NTz2b.10073$jY2.3147@newsread1.news.atl.earth link.net...
> > I saw Herculiner in the quadtratech catalog for $100+ per gallon... is it
> > that good? is it worth it? what brands do you recommend?
> >
> >
>
>
--
Will Honea <whonea@codenet.net>
bed of my MJ and I have both a decent compressor and a good airless
rig - which would be best for Herculiner?
On Wed, 27 Aug 2003 14:54:21 UTC "Chuck" <kb9kfs@hsonline.net> wrote:
> Spray on Hurculiner. That's the ticket. Thickness can be built up with
> multiple coats. Very even finish that isn't overly rough. I'd do it again
> in a minute. Looks great and doesn't add that much weight. I used 2 heavy
> coats and it only took half a gallon.
>
> Good luck
>
> --
> HAV-A-GOOD 1
>
> Chuck
>
> I didn't fight to the top of the food chain to be a vegetarian
> "Joe" <jo_ratner@yahoo.com> wrote in message
> news:NTz2b.10073$jY2.3147@newsread1.news.atl.earth link.net...
> > I saw Herculiner in the quadtratech catalog for $100+ per gallon... is it
> > that good? is it worth it? what brands do you recommend?
> >
> >
>
>
--
Will Honea <whonea@codenet.net>
08-27-2003, 05:57 PM
#55
Guest
Posts: n/a
Re: Herculiner
What type of sprayer did you use? I'd like to get around to doing the
bed of my MJ and I have both a decent compressor and a good airless
rig - which would be best for Herculiner?
On Wed, 27 Aug 2003 14:54:21 UTC "Chuck" <kb9kfs@hsonline.net> wrote:
> Spray on Hurculiner. That's the ticket. Thickness can be built up with
> multiple coats. Very even finish that isn't overly rough. I'd do it again
> in a minute. Looks great and doesn't add that much weight. I used 2 heavy
> coats and it only took half a gallon.
>
> Good luck
>
> --
> HAV-A-GOOD 1
>
> Chuck
>
> I didn't fight to the top of the food chain to be a vegetarian
> "Joe" <jo_ratner@yahoo.com> wrote in message
> news:NTz2b.10073$jY2.3147@newsread1.news.atl.earth link.net...
> > I saw Herculiner in the quadtratech catalog for $100+ per gallon... is it
> > that good? is it worth it? what brands do you recommend?
> >
> >
>
>
--
Will Honea <whonea@codenet.net>
bed of my MJ and I have both a decent compressor and a good airless
rig - which would be best for Herculiner?
On Wed, 27 Aug 2003 14:54:21 UTC "Chuck" <kb9kfs@hsonline.net> wrote:
> Spray on Hurculiner. That's the ticket. Thickness can be built up with
> multiple coats. Very even finish that isn't overly rough. I'd do it again
> in a minute. Looks great and doesn't add that much weight. I used 2 heavy
> coats and it only took half a gallon.
>
> Good luck
>
> --
> HAV-A-GOOD 1
>
> Chuck
>
> I didn't fight to the top of the food chain to be a vegetarian
> "Joe" <jo_ratner@yahoo.com> wrote in message
> news:NTz2b.10073$jY2.3147@newsread1.news.atl.earth link.net...
> > I saw Herculiner in the quadtratech catalog for $100+ per gallon... is it
> > that good? is it worth it? what brands do you recommend?
> >
> >
>
>
--
Will Honea <whonea@codenet.net>
08-27-2003, 06:58 PM
#56
Guest
Posts: n/a
Re: Herculiner
Harbor Freight undercoating gun. When I did mine they were like $8.00.
Cheap enough not to clean, just toss and use a new one for each coat. Spray
a light coat to start, then build up with heavier coats.
Good luck
BTW, high humidity and temps make the best times to shoot, Herc sets up best
then.
--
HAV-A-GOOD 1
Chuck
I didn't fight to the top of the food chain to be a vegetarian
"Will Honea" <whonea@codenet.net> wrote in message
news:JxX2tWiP5BNp-pn2-SCktRzSI66Th@anon.none.net...
> What type of sprayer did you use? I'd like to get around to doing the
> bed of my MJ and I have both a decent compressor and a good airless
> rig - which would be best for Herculiner?
>
> On Wed, 27 Aug 2003 14:54:21 UTC "Chuck" <kb9kfs@hsonline.net> wrote:
>
> > Spray on Hurculiner. That's the ticket. Thickness can be built up with
> > multiple coats. Very even finish that isn't overly rough. I'd do it
again
> > in a minute. Looks great and doesn't add that much weight. I used 2
heavy
> > coats and it only took half a gallon.
> >
> > Good luck
> >
> > --
> > HAV-A-GOOD 1
> >
> > Chuck
> >
> > I didn't fight to the top of the food chain to be a vegetarian
> > "Joe" <jo_ratner@yahoo.com> wrote in message
> > news:NTz2b.10073$jY2.3147@newsread1.news.atl.earth link.net...
> > > I saw Herculiner in the quadtratech catalog for $100+ per gallon... is
it
> > > that good? is it worth it? what brands do you recommend?
> > >
> > >
> >
> >
>
>
> --
> Will Honea <whonea@codenet.net>
Cheap enough not to clean, just toss and use a new one for each coat. Spray
a light coat to start, then build up with heavier coats.
Good luck
BTW, high humidity and temps make the best times to shoot, Herc sets up best
then.
--
HAV-A-GOOD 1
Chuck
I didn't fight to the top of the food chain to be a vegetarian
"Will Honea" <whonea@codenet.net> wrote in message
news:JxX2tWiP5BNp-pn2-SCktRzSI66Th@anon.none.net...
> What type of sprayer did you use? I'd like to get around to doing the
> bed of my MJ and I have both a decent compressor and a good airless
> rig - which would be best for Herculiner?
>
> On Wed, 27 Aug 2003 14:54:21 UTC "Chuck" <kb9kfs@hsonline.net> wrote:
>
> > Spray on Hurculiner. That's the ticket. Thickness can be built up with
> > multiple coats. Very even finish that isn't overly rough. I'd do it
again
> > in a minute. Looks great and doesn't add that much weight. I used 2
heavy
> > coats and it only took half a gallon.
> >
> > Good luck
> >
> > --
> > HAV-A-GOOD 1
> >
> > Chuck
> >
> > I didn't fight to the top of the food chain to be a vegetarian
> > "Joe" <jo_ratner@yahoo.com> wrote in message
> > news:NTz2b.10073$jY2.3147@newsread1.news.atl.earth link.net...
> > > I saw Herculiner in the quadtratech catalog for $100+ per gallon... is
it
> > > that good? is it worth it? what brands do you recommend?
> > >
> > >
> >
> >
>
>
> --
> Will Honea <whonea@codenet.net>
08-27-2003, 06:58 PM
#57
Guest
Posts: n/a
Re: Herculiner
Harbor Freight undercoating gun. When I did mine they were like $8.00.
Cheap enough not to clean, just toss and use a new one for each coat. Spray
a light coat to start, then build up with heavier coats.
Good luck
BTW, high humidity and temps make the best times to shoot, Herc sets up best
then.
--
HAV-A-GOOD 1
Chuck
I didn't fight to the top of the food chain to be a vegetarian
"Will Honea" <whonea@codenet.net> wrote in message
news:JxX2tWiP5BNp-pn2-SCktRzSI66Th@anon.none.net...
> What type of sprayer did you use? I'd like to get around to doing the
> bed of my MJ and I have both a decent compressor and a good airless
> rig - which would be best for Herculiner?
>
> On Wed, 27 Aug 2003 14:54:21 UTC "Chuck" <kb9kfs@hsonline.net> wrote:
>
> > Spray on Hurculiner. That's the ticket. Thickness can be built up with
> > multiple coats. Very even finish that isn't overly rough. I'd do it
again
> > in a minute. Looks great and doesn't add that much weight. I used 2
heavy
> > coats and it only took half a gallon.
> >
> > Good luck
> >
> > --
> > HAV-A-GOOD 1
> >
> > Chuck
> >
> > I didn't fight to the top of the food chain to be a vegetarian
> > "Joe" <jo_ratner@yahoo.com> wrote in message
> > news:NTz2b.10073$jY2.3147@newsread1.news.atl.earth link.net...
> > > I saw Herculiner in the quadtratech catalog for $100+ per gallon... is
it
> > > that good? is it worth it? what brands do you recommend?
> > >
> > >
> >
> >
>
>
> --
> Will Honea <whonea@codenet.net>
Cheap enough not to clean, just toss and use a new one for each coat. Spray
a light coat to start, then build up with heavier coats.
Good luck
BTW, high humidity and temps make the best times to shoot, Herc sets up best
then.
--
HAV-A-GOOD 1
Chuck
I didn't fight to the top of the food chain to be a vegetarian
"Will Honea" <whonea@codenet.net> wrote in message
news:JxX2tWiP5BNp-pn2-SCktRzSI66Th@anon.none.net...
> What type of sprayer did you use? I'd like to get around to doing the
> bed of my MJ and I have both a decent compressor and a good airless
> rig - which would be best for Herculiner?
>
> On Wed, 27 Aug 2003 14:54:21 UTC "Chuck" <kb9kfs@hsonline.net> wrote:
>
> > Spray on Hurculiner. That's the ticket. Thickness can be built up with
> > multiple coats. Very even finish that isn't overly rough. I'd do it
again
> > in a minute. Looks great and doesn't add that much weight. I used 2
heavy
> > coats and it only took half a gallon.
> >
> > Good luck
> >
> > --
> > HAV-A-GOOD 1
> >
> > Chuck
> >
> > I didn't fight to the top of the food chain to be a vegetarian
> > "Joe" <jo_ratner@yahoo.com> wrote in message
> > news:NTz2b.10073$jY2.3147@newsread1.news.atl.earth link.net...
> > > I saw Herculiner in the quadtratech catalog for $100+ per gallon... is
it
> > > that good? is it worth it? what brands do you recommend?
> > >
> > >
> >
> >
>
>
> --
> Will Honea <whonea@codenet.net>
08-27-2003, 08:53 PM
#58
Guest
Posts: n/a
Re: Herculiner
I think they have on the exploder forum. They get soooo many hits a year on it.
On 27 Aug 2003 21:51:47 GMT, "Will Honea" <whonea@codenet.net> wrote:
>>Yep, someone should archive that thread for posterity. It ranks with
>>some of the best comedy ever.
>>
>>On Wed, 27 Aug 2003 13:17:33 UTC "TJim" <jim@ranlet.nospam.com> wrote:
>>
>>> Heehehee! I had forgotten just how funny that whole thread was! :-D
>>> Thanks, Jenn, you just made my day!
>>> ROFLMAO!!!
>>>
>>> "jbjeep" <jbjeep@saw.net> wrote in message
>>> news:tsvnkv46jipqbehds2mhc6rd9n6e36io09@4ax.com...
>>> >
>>> http://www.explorerforum.com/forums/...5&pagenumber=1
>>> >
>>> > =)
>>> >
>>> > Always gives me a good chuckle.
>>> >
>>> >
>>> > On Tue, 26 Aug 2003 13:06:10 -0500, Jeepers <moomesa@INVALIDfnbnet.net>
>>> wrote:
>>> >
>>> > >>In article <3f4b9ea1.1164983328@news.east.***.net>,
>>> > >> tookie@***.net (Tookie ) wrote:
>>> > >>
>>> > >>> On Tue, 26 Aug 2003 08:11:24 -0600, "Gerald G. McGeorge"
>>> > >>> <gmcgeorge@frontier.net> wrote:
>>> > >>>
>>> > >>> >The Durabak I applied has the same little bits of stuff as does
>>> Herculiner.
>>> > >>> >Was yours just a smooth coating?
>>> > >>> >
>>> > >>> Yes, there was a special roller (very coarse) to give it the texture.
>>> > >>> Maybe I didn't have the same stuff as you, but on the can
>>> > >>> it depicted a truck bed being done.
>>> > >>
>>> > >>What was it, that one guy called his member, that he got some on?
>>> > >>Funny.
>>> > >>
>>> > >>
>>> > >>-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
>>> > >>http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
>>> > >>-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
>>> >
>>>
>>>
On 27 Aug 2003 21:51:47 GMT, "Will Honea" <whonea@codenet.net> wrote:
>>Yep, someone should archive that thread for posterity. It ranks with
>>some of the best comedy ever.
>>
>>On Wed, 27 Aug 2003 13:17:33 UTC "TJim" <jim@ranlet.nospam.com> wrote:
>>
>>> Heehehee! I had forgotten just how funny that whole thread was! :-D
>>> Thanks, Jenn, you just made my day!
>>> ROFLMAO!!!
>>>
>>> "jbjeep" <jbjeep@saw.net> wrote in message
>>> news:tsvnkv46jipqbehds2mhc6rd9n6e36io09@4ax.com...
>>> >
>>> http://www.explorerforum.com/forums/...5&pagenumber=1
>>> >
>>> > =)
>>> >
>>> > Always gives me a good chuckle.
>>> >
>>> >
>>> > On Tue, 26 Aug 2003 13:06:10 -0500, Jeepers <moomesa@INVALIDfnbnet.net>
>>> wrote:
>>> >
>>> > >>In article <3f4b9ea1.1164983328@news.east.***.net>,
>>> > >> tookie@***.net (Tookie ) wrote:
>>> > >>
>>> > >>> On Tue, 26 Aug 2003 08:11:24 -0600, "Gerald G. McGeorge"
>>> > >>> <gmcgeorge@frontier.net> wrote:
>>> > >>>
>>> > >>> >The Durabak I applied has the same little bits of stuff as does
>>> Herculiner.
>>> > >>> >Was yours just a smooth coating?
>>> > >>> >
>>> > >>> Yes, there was a special roller (very coarse) to give it the texture.
>>> > >>> Maybe I didn't have the same stuff as you, but on the can
>>> > >>> it depicted a truck bed being done.
>>> > >>
>>> > >>What was it, that one guy called his member, that he got some on?
>>> > >>Funny.
>>> > >>
>>> > >>
>>> > >>-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
>>> > >>http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
>>> > >>-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
>>> >
>>>
>>>
08-27-2003, 08:53 PM
#59
Guest
Posts: n/a
Re: Herculiner
I think they have on the exploder forum. They get soooo many hits a year on it.
On 27 Aug 2003 21:51:47 GMT, "Will Honea" <whonea@codenet.net> wrote:
>>Yep, someone should archive that thread for posterity. It ranks with
>>some of the best comedy ever.
>>
>>On Wed, 27 Aug 2003 13:17:33 UTC "TJim" <jim@ranlet.nospam.com> wrote:
>>
>>> Heehehee! I had forgotten just how funny that whole thread was! :-D
>>> Thanks, Jenn, you just made my day!
>>> ROFLMAO!!!
>>>
>>> "jbjeep" <jbjeep@saw.net> wrote in message
>>> news:tsvnkv46jipqbehds2mhc6rd9n6e36io09@4ax.com...
>>> >
>>> http://www.explorerforum.com/forums/...5&pagenumber=1
>>> >
>>> > =)
>>> >
>>> > Always gives me a good chuckle.
>>> >
>>> >
>>> > On Tue, 26 Aug 2003 13:06:10 -0500, Jeepers <moomesa@INVALIDfnbnet.net>
>>> wrote:
>>> >
>>> > >>In article <3f4b9ea1.1164983328@news.east.***.net>,
>>> > >> tookie@***.net (Tookie ) wrote:
>>> > >>
>>> > >>> On Tue, 26 Aug 2003 08:11:24 -0600, "Gerald G. McGeorge"
>>> > >>> <gmcgeorge@frontier.net> wrote:
>>> > >>>
>>> > >>> >The Durabak I applied has the same little bits of stuff as does
>>> Herculiner.
>>> > >>> >Was yours just a smooth coating?
>>> > >>> >
>>> > >>> Yes, there was a special roller (very coarse) to give it the texture.
>>> > >>> Maybe I didn't have the same stuff as you, but on the can
>>> > >>> it depicted a truck bed being done.
>>> > >>
>>> > >>What was it, that one guy called his member, that he got some on?
>>> > >>Funny.
>>> > >>
>>> > >>
>>> > >>-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
>>> > >>http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
>>> > >>-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
>>> >
>>>
>>>
On 27 Aug 2003 21:51:47 GMT, "Will Honea" <whonea@codenet.net> wrote:
>>Yep, someone should archive that thread for posterity. It ranks with
>>some of the best comedy ever.
>>
>>On Wed, 27 Aug 2003 13:17:33 UTC "TJim" <jim@ranlet.nospam.com> wrote:
>>
>>> Heehehee! I had forgotten just how funny that whole thread was! :-D
>>> Thanks, Jenn, you just made my day!
>>> ROFLMAO!!!
>>>
>>> "jbjeep" <jbjeep@saw.net> wrote in message
>>> news:tsvnkv46jipqbehds2mhc6rd9n6e36io09@4ax.com...
>>> >
>>> http://www.explorerforum.com/forums/...5&pagenumber=1
>>> >
>>> > =)
>>> >
>>> > Always gives me a good chuckle.
>>> >
>>> >
>>> > On Tue, 26 Aug 2003 13:06:10 -0500, Jeepers <moomesa@INVALIDfnbnet.net>
>>> wrote:
>>> >
>>> > >>In article <3f4b9ea1.1164983328@news.east.***.net>,
>>> > >> tookie@***.net (Tookie ) wrote:
>>> > >>
>>> > >>> On Tue, 26 Aug 2003 08:11:24 -0600, "Gerald G. McGeorge"
>>> > >>> <gmcgeorge@frontier.net> wrote:
>>> > >>>
>>> > >>> >The Durabak I applied has the same little bits of stuff as does
>>> Herculiner.
>>> > >>> >Was yours just a smooth coating?
>>> > >>> >
>>> > >>> Yes, there was a special roller (very coarse) to give it the texture.
>>> > >>> Maybe I didn't have the same stuff as you, but on the can
>>> > >>> it depicted a truck bed being done.
>>> > >>
>>> > >>What was it, that one guy called his member, that he got some on?
>>> > >>Funny.
>>> > >>
>>> > >>
>>> > >>-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
>>> > >>http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
>>> > >>-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
>>> >
>>>
>>>
08-28-2003, 12:24 AM
#60
Guest
Posts: n/a
Re: Herculiner
Thanks. Unfortunately, high temps and high humidity seem to be
contradictory conditions in Colorado - if it ain't raining the
humidity is in the low teens to single digits, if it is raining it
gets colder than hell instantly.
On Wed, 27 Aug 2003 22:58:32 UTC "Chuck" <kb9kfs@hsonline.net> wrote:
> Harbor Freight undercoating gun. When I did mine they were like $8.00.
> Cheap enough not to clean, just toss and use a new one for each coat. Spray
> a light coat to start, then build up with heavier coats.
>
> Good luck
>
> BTW, high humidity and temps make the best times to shoot, Herc sets up best
> then.
>
> --
> HAV-A-GOOD 1
>
> Chuck
>
> I didn't fight to the top of the food chain to be a vegetarian
> "Will Honea" <whonea@codenet.net> wrote in message
> news:JxX2tWiP5BNp-pn2-SCktRzSI66Th@anon.none.net...
> > What type of sprayer did you use? I'd like to get around to doing the
> > bed of my MJ and I have both a decent compressor and a good airless
> > rig - which would be best for Herculiner?
> >
> > On Wed, 27 Aug 2003 14:54:21 UTC "Chuck" <kb9kfs@hsonline.net> wrote:
> >
> > > Spray on Hurculiner. That's the ticket. Thickness can be built up with
> > > multiple coats. Very even finish that isn't overly rough. I'd do it
> again
> > > in a minute. Looks great and doesn't add that much weight. I used 2
> heavy
> > > coats and it only took half a gallon.
> > >
> > > Good luck
> > >
> > > --
> > > HAV-A-GOOD 1
> > >
> > > Chuck
> > >
> > > I didn't fight to the top of the food chain to be a vegetarian
> > > "Joe" <jo_ratner@yahoo.com> wrote in message
> > > news:NTz2b.10073$jY2.3147@newsread1.news.atl.earth link.net...
> > > > I saw Herculiner in the quadtratech catalog for $100+ per gallon... is
> it
> > > > that good? is it worth it? what brands do you recommend?
> > > >
> > > >
> > >
> > >
> >
> >
> > --
> > Will Honea <whonea@codenet.net>
>
>
--
Will Honea <whonea@codenet.net>
contradictory conditions in Colorado - if it ain't raining the
humidity is in the low teens to single digits, if it is raining it
gets colder than hell instantly.
On Wed, 27 Aug 2003 22:58:32 UTC "Chuck" <kb9kfs@hsonline.net> wrote:
> Harbor Freight undercoating gun. When I did mine they were like $8.00.
> Cheap enough not to clean, just toss and use a new one for each coat. Spray
> a light coat to start, then build up with heavier coats.
>
> Good luck
>
> BTW, high humidity and temps make the best times to shoot, Herc sets up best
> then.
>
> --
> HAV-A-GOOD 1
>
> Chuck
>
> I didn't fight to the top of the food chain to be a vegetarian
> "Will Honea" <whonea@codenet.net> wrote in message
> news:JxX2tWiP5BNp-pn2-SCktRzSI66Th@anon.none.net...
> > What type of sprayer did you use? I'd like to get around to doing the
> > bed of my MJ and I have both a decent compressor and a good airless
> > rig - which would be best for Herculiner?
> >
> > On Wed, 27 Aug 2003 14:54:21 UTC "Chuck" <kb9kfs@hsonline.net> wrote:
> >
> > > Spray on Hurculiner. That's the ticket. Thickness can be built up with
> > > multiple coats. Very even finish that isn't overly rough. I'd do it
> again
> > > in a minute. Looks great and doesn't add that much weight. I used 2
> heavy
> > > coats and it only took half a gallon.
> > >
> > > Good luck
> > >
> > > --
> > > HAV-A-GOOD 1
> > >
> > > Chuck
> > >
> > > I didn't fight to the top of the food chain to be a vegetarian
> > > "Joe" <jo_ratner@yahoo.com> wrote in message
> > > news:NTz2b.10073$jY2.3147@newsread1.news.atl.earth link.net...
> > > > I saw Herculiner in the quadtratech catalog for $100+ per gallon... is
> it
> > > > that good? is it worth it? what brands do you recommend?
> > > >
> > > >
> > >
> > >
> >
> >
> > --
> > Will Honea <whonea@codenet.net>
>
>
--
Will Honea <whonea@codenet.net>
