Head Gaskets .... What brand are you guys using?
08-07-2005, 07:03 PM
#31
Guest
Posts: n/a
Re: Head Gaskets .... PROBLEM FOUND
In article <030820052205015292%RhmpL33@nospam.net>, Rich Hampel
<RhmpL33@nospam.net> wrote:
Found the problem !!!! Found it in a Service Advisory update 1989!
Engine is a 2.8L, that Ive rebuilt and cammed, etc. etc. etc.
Everything is flat, etc. etc.etc.
There in the small print of the service advisory in a borrowed shop
manual: ...... head bolt threads shall be coated with RTV !!!!!!!!!!!!
Yeah OK, the outboard bolts do actually penetrate the water jacket and
the head bolt threads DO need to be sealed .... just like an old
fashioned studded engine. Last two times of extensive engine work with
(head gasket replacement) I just guess I was 'lucky'. I made up a
'jig' and pressurized the outboard bores .... yup, they are directely
connected through to the cooling loop. After several other previous
gasket replacements (dry) .... I found the friggin problem .... thanks
for all your kind advice - It at least got me looking in the right
direction.
thanks
RichH 2.8L (stretched and tickeled) ..... 86 XJ Cherokee @ 340,000
mi.
<RhmpL33@nospam.net> wrote:
Found the problem !!!! Found it in a Service Advisory update 1989!
Engine is a 2.8L, that Ive rebuilt and cammed, etc. etc. etc.
Everything is flat, etc. etc.etc.
There in the small print of the service advisory in a borrowed shop
manual: ...... head bolt threads shall be coated with RTV !!!!!!!!!!!!
Yeah OK, the outboard bolts do actually penetrate the water jacket and
the head bolt threads DO need to be sealed .... just like an old
fashioned studded engine. Last two times of extensive engine work with
(head gasket replacement) I just guess I was 'lucky'. I made up a
'jig' and pressurized the outboard bores .... yup, they are directely
connected through to the cooling loop. After several other previous
gasket replacements (dry) .... I found the friggin problem .... thanks
for all your kind advice - It at least got me looking in the right
direction.
thanks
RichH 2.8L (stretched and tickeled) ..... 86 XJ Cherokee @ 340,000
mi.
08-07-2005, 07:03 PM
#32
Guest
Posts: n/a
Re: Head Gaskets .... PROBLEM FOUND
In article <030820052205015292%RhmpL33@nospam.net>, Rich Hampel
<RhmpL33@nospam.net> wrote:
Found the problem !!!! Found it in a Service Advisory update 1989!
Engine is a 2.8L, that Ive rebuilt and cammed, etc. etc. etc.
Everything is flat, etc. etc.etc.
There in the small print of the service advisory in a borrowed shop
manual: ...... head bolt threads shall be coated with RTV !!!!!!!!!!!!
Yeah OK, the outboard bolts do actually penetrate the water jacket and
the head bolt threads DO need to be sealed .... just like an old
fashioned studded engine. Last two times of extensive engine work with
(head gasket replacement) I just guess I was 'lucky'. I made up a
'jig' and pressurized the outboard bores .... yup, they are directely
connected through to the cooling loop. After several other previous
gasket replacements (dry) .... I found the friggin problem .... thanks
for all your kind advice - It at least got me looking in the right
direction.
thanks
RichH 2.8L (stretched and tickeled) ..... 86 XJ Cherokee @ 340,000
mi.
<RhmpL33@nospam.net> wrote:
Found the problem !!!! Found it in a Service Advisory update 1989!
Engine is a 2.8L, that Ive rebuilt and cammed, etc. etc. etc.
Everything is flat, etc. etc.etc.
There in the small print of the service advisory in a borrowed shop
manual: ...... head bolt threads shall be coated with RTV !!!!!!!!!!!!
Yeah OK, the outboard bolts do actually penetrate the water jacket and
the head bolt threads DO need to be sealed .... just like an old
fashioned studded engine. Last two times of extensive engine work with
(head gasket replacement) I just guess I was 'lucky'. I made up a
'jig' and pressurized the outboard bores .... yup, they are directely
connected through to the cooling loop. After several other previous
gasket replacements (dry) .... I found the friggin problem .... thanks
for all your kind advice - It at least got me looking in the right
direction.
thanks
RichH 2.8L (stretched and tickeled) ..... 86 XJ Cherokee @ 340,000
mi.
08-07-2005, 07:03 PM
#33
Guest
Posts: n/a
Re: Head Gaskets .... PROBLEM FOUND
In article <030820052205015292%RhmpL33@nospam.net>, Rich Hampel
<RhmpL33@nospam.net> wrote:
Found the problem !!!! Found it in a Service Advisory update 1989!
Engine is a 2.8L, that Ive rebuilt and cammed, etc. etc. etc.
Everything is flat, etc. etc.etc.
There in the small print of the service advisory in a borrowed shop
manual: ...... head bolt threads shall be coated with RTV !!!!!!!!!!!!
Yeah OK, the outboard bolts do actually penetrate the water jacket and
the head bolt threads DO need to be sealed .... just like an old
fashioned studded engine. Last two times of extensive engine work with
(head gasket replacement) I just guess I was 'lucky'. I made up a
'jig' and pressurized the outboard bores .... yup, they are directely
connected through to the cooling loop. After several other previous
gasket replacements (dry) .... I found the friggin problem .... thanks
for all your kind advice - It at least got me looking in the right
direction.
thanks
RichH 2.8L (stretched and tickeled) ..... 86 XJ Cherokee @ 340,000
mi.
<RhmpL33@nospam.net> wrote:
Found the problem !!!! Found it in a Service Advisory update 1989!
Engine is a 2.8L, that Ive rebuilt and cammed, etc. etc. etc.
Everything is flat, etc. etc.etc.
There in the small print of the service advisory in a borrowed shop
manual: ...... head bolt threads shall be coated with RTV !!!!!!!!!!!!
Yeah OK, the outboard bolts do actually penetrate the water jacket and
the head bolt threads DO need to be sealed .... just like an old
fashioned studded engine. Last two times of extensive engine work with
(head gasket replacement) I just guess I was 'lucky'. I made up a
'jig' and pressurized the outboard bores .... yup, they are directely
connected through to the cooling loop. After several other previous
gasket replacements (dry) .... I found the friggin problem .... thanks
for all your kind advice - It at least got me looking in the right
direction.
thanks
RichH 2.8L (stretched and tickeled) ..... 86 XJ Cherokee @ 340,000
mi.
08-07-2005, 07:11 PM
#34
Guest
Posts: n/a
Re: Head Gaskets .... PROBLEM FOUND
Well done !
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Rich Hampel" <RhmpL33@nospam.net> wrote in message
news:070820051903253894%RhmpL33@nospam.net...
> In article <030820052205015292%RhmpL33@nospam.net>, Rich Hampel
> <RhmpL33@nospam.net> wrote:
>
> Found the problem !!!! Found it in a Service Advisory update 1989!
> Engine is a 2.8L, that Ive rebuilt and cammed, etc. etc. etc.
> Everything is flat, etc. etc.etc.
> There in the small print of the service advisory in a borrowed shop
> manual: ...... head bolt threads shall be coated with RTV !!!!!!!!!!!!
> Yeah OK, the outboard bolts do actually penetrate the water jacket and
> the head bolt threads DO need to be sealed .... just like an old
> fashioned studded engine. Last two times of extensive engine work with
> (head gasket replacement) I just guess I was 'lucky'. I made up a
> 'jig' and pressurized the outboard bores .... yup, they are directely
> connected through to the cooling loop. After several other previous
> gasket replacements (dry) .... I found the friggin problem .... thanks
> for all your kind advice - It at least got me looking in the right
> direction.
>
> thanks
> RichH 2.8L (stretched and tickeled) ..... 86 XJ Cherokee @ 340,000
> mi.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Rich Hampel" <RhmpL33@nospam.net> wrote in message
news:070820051903253894%RhmpL33@nospam.net...
> In article <030820052205015292%RhmpL33@nospam.net>, Rich Hampel
> <RhmpL33@nospam.net> wrote:
>
> Found the problem !!!! Found it in a Service Advisory update 1989!
> Engine is a 2.8L, that Ive rebuilt and cammed, etc. etc. etc.
> Everything is flat, etc. etc.etc.
> There in the small print of the service advisory in a borrowed shop
> manual: ...... head bolt threads shall be coated with RTV !!!!!!!!!!!!
> Yeah OK, the outboard bolts do actually penetrate the water jacket and
> the head bolt threads DO need to be sealed .... just like an old
> fashioned studded engine. Last two times of extensive engine work with
> (head gasket replacement) I just guess I was 'lucky'. I made up a
> 'jig' and pressurized the outboard bores .... yup, they are directely
> connected through to the cooling loop. After several other previous
> gasket replacements (dry) .... I found the friggin problem .... thanks
> for all your kind advice - It at least got me looking in the right
> direction.
>
> thanks
> RichH 2.8L (stretched and tickeled) ..... 86 XJ Cherokee @ 340,000
> mi.
08-07-2005, 07:11 PM
#35
Guest
Posts: n/a
Re: Head Gaskets .... PROBLEM FOUND
Well done !
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Rich Hampel" <RhmpL33@nospam.net> wrote in message
news:070820051903253894%RhmpL33@nospam.net...
> In article <030820052205015292%RhmpL33@nospam.net>, Rich Hampel
> <RhmpL33@nospam.net> wrote:
>
> Found the problem !!!! Found it in a Service Advisory update 1989!
> Engine is a 2.8L, that Ive rebuilt and cammed, etc. etc. etc.
> Everything is flat, etc. etc.etc.
> There in the small print of the service advisory in a borrowed shop
> manual: ...... head bolt threads shall be coated with RTV !!!!!!!!!!!!
> Yeah OK, the outboard bolts do actually penetrate the water jacket and
> the head bolt threads DO need to be sealed .... just like an old
> fashioned studded engine. Last two times of extensive engine work with
> (head gasket replacement) I just guess I was 'lucky'. I made up a
> 'jig' and pressurized the outboard bores .... yup, they are directely
> connected through to the cooling loop. After several other previous
> gasket replacements (dry) .... I found the friggin problem .... thanks
> for all your kind advice - It at least got me looking in the right
> direction.
>
> thanks
> RichH 2.8L (stretched and tickeled) ..... 86 XJ Cherokee @ 340,000
> mi.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Rich Hampel" <RhmpL33@nospam.net> wrote in message
news:070820051903253894%RhmpL33@nospam.net...
> In article <030820052205015292%RhmpL33@nospam.net>, Rich Hampel
> <RhmpL33@nospam.net> wrote:
>
> Found the problem !!!! Found it in a Service Advisory update 1989!
> Engine is a 2.8L, that Ive rebuilt and cammed, etc. etc. etc.
> Everything is flat, etc. etc.etc.
> There in the small print of the service advisory in a borrowed shop
> manual: ...... head bolt threads shall be coated with RTV !!!!!!!!!!!!
> Yeah OK, the outboard bolts do actually penetrate the water jacket and
> the head bolt threads DO need to be sealed .... just like an old
> fashioned studded engine. Last two times of extensive engine work with
> (head gasket replacement) I just guess I was 'lucky'. I made up a
> 'jig' and pressurized the outboard bores .... yup, they are directely
> connected through to the cooling loop. After several other previous
> gasket replacements (dry) .... I found the friggin problem .... thanks
> for all your kind advice - It at least got me looking in the right
> direction.
>
> thanks
> RichH 2.8L (stretched and tickeled) ..... 86 XJ Cherokee @ 340,000
> mi.
08-07-2005, 07:11 PM
#36
Guest
Posts: n/a
Re: Head Gaskets .... PROBLEM FOUND
Well done !
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Rich Hampel" <RhmpL33@nospam.net> wrote in message
news:070820051903253894%RhmpL33@nospam.net...
> In article <030820052205015292%RhmpL33@nospam.net>, Rich Hampel
> <RhmpL33@nospam.net> wrote:
>
> Found the problem !!!! Found it in a Service Advisory update 1989!
> Engine is a 2.8L, that Ive rebuilt and cammed, etc. etc. etc.
> Everything is flat, etc. etc.etc.
> There in the small print of the service advisory in a borrowed shop
> manual: ...... head bolt threads shall be coated with RTV !!!!!!!!!!!!
> Yeah OK, the outboard bolts do actually penetrate the water jacket and
> the head bolt threads DO need to be sealed .... just like an old
> fashioned studded engine. Last two times of extensive engine work with
> (head gasket replacement) I just guess I was 'lucky'. I made up a
> 'jig' and pressurized the outboard bores .... yup, they are directely
> connected through to the cooling loop. After several other previous
> gasket replacements (dry) .... I found the friggin problem .... thanks
> for all your kind advice - It at least got me looking in the right
> direction.
>
> thanks
> RichH 2.8L (stretched and tickeled) ..... 86 XJ Cherokee @ 340,000
> mi.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Rich Hampel" <RhmpL33@nospam.net> wrote in message
news:070820051903253894%RhmpL33@nospam.net...
> In article <030820052205015292%RhmpL33@nospam.net>, Rich Hampel
> <RhmpL33@nospam.net> wrote:
>
> Found the problem !!!! Found it in a Service Advisory update 1989!
> Engine is a 2.8L, that Ive rebuilt and cammed, etc. etc. etc.
> Everything is flat, etc. etc.etc.
> There in the small print of the service advisory in a borrowed shop
> manual: ...... head bolt threads shall be coated with RTV !!!!!!!!!!!!
> Yeah OK, the outboard bolts do actually penetrate the water jacket and
> the head bolt threads DO need to be sealed .... just like an old
> fashioned studded engine. Last two times of extensive engine work with
> (head gasket replacement) I just guess I was 'lucky'. I made up a
> 'jig' and pressurized the outboard bores .... yup, they are directely
> connected through to the cooling loop. After several other previous
> gasket replacements (dry) .... I found the friggin problem .... thanks
> for all your kind advice - It at least got me looking in the right
> direction.
>
> thanks
> RichH 2.8L (stretched and tickeled) ..... 86 XJ Cherokee @ 340,000
> mi.
08-07-2005, 07:11 PM
#37
Guest
Posts: n/a
Re: Head Gaskets .... PROBLEM FOUND
Well done !
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Rich Hampel" <RhmpL33@nospam.net> wrote in message
news:070820051903253894%RhmpL33@nospam.net...
> In article <030820052205015292%RhmpL33@nospam.net>, Rich Hampel
> <RhmpL33@nospam.net> wrote:
>
> Found the problem !!!! Found it in a Service Advisory update 1989!
> Engine is a 2.8L, that Ive rebuilt and cammed, etc. etc. etc.
> Everything is flat, etc. etc.etc.
> There in the small print of the service advisory in a borrowed shop
> manual: ...... head bolt threads shall be coated with RTV !!!!!!!!!!!!
> Yeah OK, the outboard bolts do actually penetrate the water jacket and
> the head bolt threads DO need to be sealed .... just like an old
> fashioned studded engine. Last two times of extensive engine work with
> (head gasket replacement) I just guess I was 'lucky'. I made up a
> 'jig' and pressurized the outboard bores .... yup, they are directely
> connected through to the cooling loop. After several other previous
> gasket replacements (dry) .... I found the friggin problem .... thanks
> for all your kind advice - It at least got me looking in the right
> direction.
>
> thanks
> RichH 2.8L (stretched and tickeled) ..... 86 XJ Cherokee @ 340,000
> mi.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Rich Hampel" <RhmpL33@nospam.net> wrote in message
news:070820051903253894%RhmpL33@nospam.net...
> In article <030820052205015292%RhmpL33@nospam.net>, Rich Hampel
> <RhmpL33@nospam.net> wrote:
>
> Found the problem !!!! Found it in a Service Advisory update 1989!
> Engine is a 2.8L, that Ive rebuilt and cammed, etc. etc. etc.
> Everything is flat, etc. etc.etc.
> There in the small print of the service advisory in a borrowed shop
> manual: ...... head bolt threads shall be coated with RTV !!!!!!!!!!!!
> Yeah OK, the outboard bolts do actually penetrate the water jacket and
> the head bolt threads DO need to be sealed .... just like an old
> fashioned studded engine. Last two times of extensive engine work with
> (head gasket replacement) I just guess I was 'lucky'. I made up a
> 'jig' and pressurized the outboard bores .... yup, they are directely
> connected through to the cooling loop. After several other previous
> gasket replacements (dry) .... I found the friggin problem .... thanks
> for all your kind advice - It at least got me looking in the right
> direction.
>
> thanks
> RichH 2.8L (stretched and tickeled) ..... 86 XJ Cherokee @ 340,000
> mi.
Thread
Thread Starter
Forum
Replies
Last Post
trigger
Jeep Grand Cherokee Forum
3
11-24-2013 09:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)