Got the Banks header in. :)
Guest
Posts: n/a
Re: Got the Banks header in. :)
http://www.holley.com/HiOctn/ProdLin...f9851-1HKR.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Yea, I'm not too worried about a set of tuned headers on an I6.
> Tuning is more for higher RPM horsepower anyhoo. Did turn up one
> interesting link while searching on the intake rail though,
> seems they changed to a better intake rail (equal distance)
> in later years. Not going to bother as it isn't a direct
> drop-in and requires re-doing the accessories to fit.
> Arg. And of course I don't save the link. :(
>
> My main concern was fixing the header and getting something
> that hopefully will never have to be messed with again.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Yea, I'm not too worried about a set of tuned headers on an I6.
> Tuning is more for higher RPM horsepower anyhoo. Did turn up one
> interesting link while searching on the intake rail though,
> seems they changed to a better intake rail (equal distance)
> in later years. Not going to bother as it isn't a direct
> drop-in and requires re-doing the accessories to fit.
> Arg. And of course I don't save the link. :(
>
> My main concern was fixing the header and getting something
> that hopefully will never have to be messed with again.
Guest
Posts: n/a
Re: Got the Banks header in. :)
http://www.holley.com/HiOctn/ProdLin...f9851-1HKR.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Yea, I'm not too worried about a set of tuned headers on an I6.
> Tuning is more for higher RPM horsepower anyhoo. Did turn up one
> interesting link while searching on the intake rail though,
> seems they changed to a better intake rail (equal distance)
> in later years. Not going to bother as it isn't a direct
> drop-in and requires re-doing the accessories to fit.
> Arg. And of course I don't save the link. :(
>
> My main concern was fixing the header and getting something
> that hopefully will never have to be messed with again.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Yea, I'm not too worried about a set of tuned headers on an I6.
> Tuning is more for higher RPM horsepower anyhoo. Did turn up one
> interesting link while searching on the intake rail though,
> seems they changed to a better intake rail (equal distance)
> in later years. Not going to bother as it isn't a direct
> drop-in and requires re-doing the accessories to fit.
> Arg. And of course I don't save the link. :(
>
> My main concern was fixing the header and getting something
> that hopefully will never have to be messed with again.
Guest
Posts: n/a
Re: Got the Banks header in. :)
http://www.holley.com/HiOctn/ProdLin...f9851-1HKR.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Yea, I'm not too worried about a set of tuned headers on an I6.
> Tuning is more for higher RPM horsepower anyhoo. Did turn up one
> interesting link while searching on the intake rail though,
> seems they changed to a better intake rail (equal distance)
> in later years. Not going to bother as it isn't a direct
> drop-in and requires re-doing the accessories to fit.
> Arg. And of course I don't save the link. :(
>
> My main concern was fixing the header and getting something
> that hopefully will never have to be messed with again.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Yea, I'm not too worried about a set of tuned headers on an I6.
> Tuning is more for higher RPM horsepower anyhoo. Did turn up one
> interesting link while searching on the intake rail though,
> seems they changed to a better intake rail (equal distance)
> in later years. Not going to bother as it isn't a direct
> drop-in and requires re-doing the accessories to fit.
> Arg. And of course I don't save the link. :(
>
> My main concern was fixing the header and getting something
> that hopefully will never have to be messed with again.
Guest
Posts: n/a
Re: Got the Banks header in. :)
L.W. (ßill) ------ III did pass the time by typing:
> http://www.holley.com/HiOctn/ProdLin...f9851-1HKR.jpg
OOO shiny. :)
I think that one would probably end up right on top of the engine mount
on the ZJ. At any rate it would need a new downpipe fabricated.
Found the link.
http://go.jeep-xj.info/HowtoIntakeManifold1.htm
--
DougW
> http://www.holley.com/HiOctn/ProdLin...f9851-1HKR.jpg
OOO shiny. :)
I think that one would probably end up right on top of the engine mount
on the ZJ. At any rate it would need a new downpipe fabricated.
Found the link.
http://go.jeep-xj.info/HowtoIntakeManifold1.htm
--
DougW
Guest
Posts: n/a
Re: Got the Banks header in. :)
L.W. (ßill) ------ III did pass the time by typing:
> http://www.holley.com/HiOctn/ProdLin...f9851-1HKR.jpg
OOO shiny. :)
I think that one would probably end up right on top of the engine mount
on the ZJ. At any rate it would need a new downpipe fabricated.
Found the link.
http://go.jeep-xj.info/HowtoIntakeManifold1.htm
--
DougW
> http://www.holley.com/HiOctn/ProdLin...f9851-1HKR.jpg
OOO shiny. :)
I think that one would probably end up right on top of the engine mount
on the ZJ. At any rate it would need a new downpipe fabricated.
Found the link.
http://go.jeep-xj.info/HowtoIntakeManifold1.htm
--
DougW
Guest
Posts: n/a
Re: Got the Banks header in. :)
L.W. (ßill) ------ III did pass the time by typing:
> http://www.holley.com/HiOctn/ProdLin...f9851-1HKR.jpg
OOO shiny. :)
I think that one would probably end up right on top of the engine mount
on the ZJ. At any rate it would need a new downpipe fabricated.
Found the link.
http://go.jeep-xj.info/HowtoIntakeManifold1.htm
--
DougW
> http://www.holley.com/HiOctn/ProdLin...f9851-1HKR.jpg
OOO shiny. :)
I think that one would probably end up right on top of the engine mount
on the ZJ. At any rate it would need a new downpipe fabricated.
Found the link.
http://go.jeep-xj.info/HowtoIntakeManifold1.htm
--
DougW
Guest
Posts: n/a
Re: Got the Banks header in. :)
L.W. (ßill) ------ III did pass the time by typing:
> http://www.holley.com/HiOctn/ProdLin...f9851-1HKR.jpg
OOO shiny. :)
I think that one would probably end up right on top of the engine mount
on the ZJ. At any rate it would need a new downpipe fabricated.
Found the link.
http://go.jeep-xj.info/HowtoIntakeManifold1.htm
--
DougW
> http://www.holley.com/HiOctn/ProdLin...f9851-1HKR.jpg
OOO shiny. :)
I think that one would probably end up right on top of the engine mount
on the ZJ. At any rate it would need a new downpipe fabricated.
Found the link.
http://go.jeep-xj.info/HowtoIntakeManifold1.htm
--
DougW
Thread
Thread Starter
Forum
Replies
Last Post
Doug Gavilanes
Jeep Mailing List
3
Jan 20, 2006 07:29 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
