TJim

Cool!

--
Jim
--
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"You can do any job in the world with the wrong tool if you try hard
enough..."


"cantrellm" <cantrelm@bellsouth.net> wrote in message
news:AGzlb.234$Lj6.127@bignews3.bellsouth.net...
> let me try that again!!
>
> http://www.cantrell.com/scrap/shifter21.JPG
>
> "cantrellm" <cantrelm@bellsouth.net> wrote in message
> news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> > Good job Travis,
> >
> > check out what I made from scrap at my place of work. We do all
stainless
> > steel and aluminum work here. this is a polished alum. shift **** I had
> > them make out of scrap!!
> >
> > http://cantrell.com/scrap/shifter21.jpg
> >
> > Tom Reins
> > 2000 TJ Sport
> > Just paid off
> >
> >
> > "travis" <travist34removethis@hotmail.com> wrote in message
> > news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > > They had a pile of "to be thrown away" metal where I work. They had
> > > some brackets that are used to rack mount network equipment that was
> > > made of some pretty substantial steel. I have two holes in the tub on
> > > my CJ, so I measured them and...
> > > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > > Now I have patches for the holes that I can weld in. Check out how
> > > thick they are:
> > > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> > >
> > > After I get them welded in I'm going to scuff up the entire inside of
> > > the tub, then wipe it down with acetone, then apply two layers of
> > > "Herculiner" the whole shootin' match. I'll take pictures of the
> > > progress. I plan on doing this Saturday.
> > >
> > >
> > > --
> > > Travis
> > > http://jeepadventures.dyndns.org/jeep.html
> > > The meek shall inherit the earth. After I'm finished with it.
> > > :wq!
> >
> >
>
>

TJim

Cool!

--
Jim
--
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"You can do any job in the world with the wrong tool if you try hard
enough..."


"cantrellm" <cantrelm@bellsouth.net> wrote in message
news:AGzlb.234$Lj6.127@bignews3.bellsouth.net...
> let me try that again!!
>
> http://www.cantrell.com/scrap/shifter21.JPG
>
> "cantrellm" <cantrelm@bellsouth.net> wrote in message
> news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> > Good job Travis,
> >
> > check out what I made from scrap at my place of work. We do all
stainless
> > steel and aluminum work here. this is a polished alum. shift **** I had
> > them make out of scrap!!
> >
> > http://cantrell.com/scrap/shifter21.jpg
> >
> > Tom Reins
> > 2000 TJ Sport
> > Just paid off
> >
> >
> > "travis" <travist34removethis@hotmail.com> wrote in message
> > news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > > They had a pile of "to be thrown away" metal where I work. They had
> > > some brackets that are used to rack mount network equipment that was
> > > made of some pretty substantial steel. I have two holes in the tub on
> > > my CJ, so I measured them and...
> > > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > > Now I have patches for the holes that I can weld in. Check out how
> > > thick they are:
> > > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> > >
> > > After I get them welded in I'm going to scuff up the entire inside of
> > > the tub, then wipe it down with acetone, then apply two layers of
> > > "Herculiner" the whole shootin' match. I'll take pictures of the
> > > progress. I plan on doing this Saturday.
> > >
> > >
> > > --
> > > Travis
> > > http://jeepadventures.dyndns.org/jeep.html
> > > The meek shall inherit the earth. After I'm finished with it.
> > > :wq!
> >
> >
>
>

twaldron

I guess you don't tap your fingers to the music really hard on the
shifter ****...

cantrellm wrote:

> let me try that again!!
>
> http://www.cantrell.com/scrap/shifter21.JPG


--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport

There is a very fine line between "hobby" and "mental illness."
-- Dave Barry

Pronunciation: 'jEp
Function: noun
Date: 1940

Etymology: probably from g. p. (abbreviation of general purpose)
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.

http://www.7slotgrille.com/jeepers/t...ron/index.html
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________

twaldron

I guess you don't tap your fingers to the music really hard on the
shifter ****...

cantrellm wrote:

> let me try that again!!
>
> http://www.cantrell.com/scrap/shifter21.JPG


--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport

There is a very fine line between "hobby" and "mental illness."
-- Dave Barry

Pronunciation: 'jEp
Function: noun
Date: 1940

Etymology: probably from g. p. (abbreviation of general purpose)
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.

http://www.7slotgrille.com/jeepers/t...ron/index.html
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________

twaldron

I guess you don't tap your fingers to the music really hard on the
shifter ****...

cantrellm wrote:

> let me try that again!!
>
> http://www.cantrell.com/scrap/shifter21.JPG


--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport

There is a very fine line between "hobby" and "mental illness."
-- Dave Barry

Pronunciation: 'jEp
Function: noun
Date: 1940

Etymology: probably from g. p. (abbreviation of general purpose)
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.

http://www.7slotgrille.com/jeepers/t...ron/index.html
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________

cantrellm

Hey Mike,
Thanks, i'm not a hunter either, just thought it would be something no one
else would have. Got the idea from a motorcycle handle bar riser I saw in a
magazine.
Tom

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F96CA7C.F71949B8@sympatico.ca...
> LOL!
>
> Now that is an original, for sure!
>
> Looks sharp, not really to my taste, (non hunter) but nice all the same.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> cantrellm wrote:
> >
> > let me try that again!!
> >
> > http://www.cantrell.com/scrap/shifter21.JPG
> >
> > "cantrellm" <cantrelm@bellsouth.net> wrote in message
> > news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> > > Good job Travis,
> > >
> > > check out what I made from scrap at my place of work. We do all
stainless
> > > steel and aluminum work here. this is a polished alum. shift **** I
had
> > > them make out of scrap!!
> > >
> > > http://cantrell.com/scrap/shifter21.jpg
> > >
> > > Tom Reins
> > > 2000 TJ Sport
> > > Just paid off
> > >
> > >
> > > "travis" <travist34removethis@hotmail.com> wrote in message
> > > news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > > > They had a pile of "to be thrown away" metal where I work. They had
> > > > some brackets that are used to rack mount network equipment that was
> > > > made of some pretty substantial steel. I have two holes in the tub
on
> > > > my CJ, so I measured them and...
> > > > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > > > Now I have patches for the holes that I can weld in. Check out how
> > > > thick they are:
> > > > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> > > >
> > > > After I get them welded in I'm going to scuff up the entire inside
of
> > > > the tub, then wipe it down with acetone, then apply two layers of
> > > > "Herculiner" the whole shootin' match. I'll take pictures of the
> > > > progress. I plan on doing this Saturday.
> > > >
> > > >
> > > > --
> > > > Travis
> > > > http://jeepadventures.dyndns.org/jeep.html
> > > > The meek shall inherit the earth. After I'm finished with it.
> > > > :wq!
> > >
> > >

cantrellm

Hey Mike,
Thanks, i'm not a hunter either, just thought it would be something no one
else would have. Got the idea from a motorcycle handle bar riser I saw in a
magazine.
Tom

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F96CA7C.F71949B8@sympatico.ca...
> LOL!
>
> Now that is an original, for sure!
>
> Looks sharp, not really to my taste, (non hunter) but nice all the same.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> cantrellm wrote:
> >
> > let me try that again!!
> >
> > http://www.cantrell.com/scrap/shifter21.JPG
> >
> > "cantrellm" <cantrelm@bellsouth.net> wrote in message
> > news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> > > Good job Travis,
> > >
> > > check out what I made from scrap at my place of work. We do all
stainless
> > > steel and aluminum work here. this is a polished alum. shift **** I
had
> > > them make out of scrap!!
> > >
> > > http://cantrell.com/scrap/shifter21.jpg
> > >
> > > Tom Reins
> > > 2000 TJ Sport
> > > Just paid off
> > >
> > >
> > > "travis" <travist34removethis@hotmail.com> wrote in message
> > > news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > > > They had a pile of "to be thrown away" metal where I work. They had
> > > > some brackets that are used to rack mount network equipment that was
> > > > made of some pretty substantial steel. I have two holes in the tub
on
> > > > my CJ, so I measured them and...
> > > > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > > > Now I have patches for the holes that I can weld in. Check out how
> > > > thick they are:
> > > > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> > > >
> > > > After I get them welded in I'm going to scuff up the entire inside
of
> > > > the tub, then wipe it down with acetone, then apply two layers of
> > > > "Herculiner" the whole shootin' match. I'll take pictures of the
> > > > progress. I plan on doing this Saturday.
> > > >
> > > >
> > > > --
> > > > Travis
> > > > http://jeepadventures.dyndns.org/jeep.html
> > > > The meek shall inherit the earth. After I'm finished with it.
> > > > :wq!
> > >
> > >

cantrellm

Hey Mike,
Thanks, i'm not a hunter either, just thought it would be something no one
else would have. Got the idea from a motorcycle handle bar riser I saw in a
magazine.
Tom

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F96CA7C.F71949B8@sympatico.ca...
> LOL!
>
> Now that is an original, for sure!
>
> Looks sharp, not really to my taste, (non hunter) but nice all the same.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> cantrellm wrote:
> >
> > let me try that again!!
> >
> > http://www.cantrell.com/scrap/shifter21.JPG
> >
> > "cantrellm" <cantrelm@bellsouth.net> wrote in message
> > news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> > > Good job Travis,
> > >
> > > check out what I made from scrap at my place of work. We do all
stainless
> > > steel and aluminum work here. this is a polished alum. shift **** I
had
> > > them make out of scrap!!
> > >
> > > http://cantrell.com/scrap/shifter21.jpg
> > >
> > > Tom Reins
> > > 2000 TJ Sport
> > > Just paid off
> > >
> > >
> > > "travis" <travist34removethis@hotmail.com> wrote in message
> > > news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > > > They had a pile of "to be thrown away" metal where I work. They had
> > > > some brackets that are used to rack mount network equipment that was
> > > > made of some pretty substantial steel. I have two holes in the tub
on
> > > > my CJ, so I measured them and...
> > > > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > > > Now I have patches for the holes that I can weld in. Check out how
> > > > thick they are:
> > > > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> > > >
> > > > After I get them welded in I'm going to scuff up the entire inside
of
> > > > the tub, then wipe it down with acetone, then apply two layers of
> > > > "Herculiner" the whole shootin' match. I'll take pictures of the
> > > > progress. I plan on doing this Saturday.
> > > >
> > > >
> > > > --
> > > > Travis
> > > > http://jeepadventures.dyndns.org/jeep.html
> > > > The meek shall inherit the earth. After I'm finished with it.
> > > > :wq!
> > >
> > >

cantrellm

If you look closely you will notice that these have already been popped!
(lol) I do have another one I made with the primers still intacked (bullets
and powder been removed), going to make new shaft for transfer case and put
it on that shaft.

Tom

"twaldron" <twaldron@sbcOBVIOUSglobal.net> wrote in message
news:ucAlb.1498$tG5.402@newssvr24.news.prodigy.com ...
> I guess you don't tap your fingers to the music really hard on the
> shifter ****...
>
> cantrellm wrote:
>
> > let me try that again!!
> >
> > http://www.cantrell.com/scrap/shifter21.JPG
>
>
> --
> __________________________________________________ _________
> tw
> 03 TJ Rubicon
> 01 XJ Sport
>
> There is a very fine line between "hobby" and "mental illness."
> -- Dave Barry
>
> Pronunciation: 'jEp
> Function: noun
> Date: 1940
>
> Etymology: probably from g. p. (abbreviation of general purpose)
> A small general-purpose motor vehicle with 80-inch wheelbase,
> 1/4-ton capacity, and four-wheel drive used by the U.S. army in
> World War II.
>
> http://www.7slotgrille.com/jeepers/t...ron/index.html
> (Please remove the OBVIOUS to reply by email)
> __________________________________________________ _________
>

cantrellm

If you look closely you will notice that these have already been popped!
(lol) I do have another one I made with the primers still intacked (bullets
and powder been removed), going to make new shaft for transfer case and put
it on that shaft.

Tom

"twaldron" <twaldron@sbcOBVIOUSglobal.net> wrote in message
news:ucAlb.1498$tG5.402@newssvr24.news.prodigy.com ...
> I guess you don't tap your fingers to the music really hard on the
> shifter ****...
>
> cantrellm wrote:
>
> > let me try that again!!
> >
> > http://www.cantrell.com/scrap/shifter21.JPG
>
>
> --
> __________________________________________________ _________
> tw
> 03 TJ Rubicon
> 01 XJ Sport
>
> There is a very fine line between "hobby" and "mental illness."
> -- Dave Barry
>
> Pronunciation: 'jEp
> Function: noun
> Date: 1940
>
> Etymology: probably from g. p. (abbreviation of general purpose)
> A small general-purpose motor vehicle with 80-inch wheelbase,
> 1/4-ton capacity, and four-wheel drive used by the U.S. army in
> World War II.
>
> http://www.7slotgrille.com/jeepers/t...ron/index.html
> (Please remove the OBVIOUS to reply by email)
> __________________________________________________ _________
>