Good use for scrap metal
#61
Guest
Posts: n/a
Re: Good use for scrap metal also
If you look closely you will notice that these have already been popped!
(lol) I do have another one I made with the primers still intacked (bullets
and powder been removed), going to make new shaft for transfer case and put
it on that shaft.
Tom
"twaldron" <twaldron@sbcOBVIOUSglobal.net> wrote in message
news:ucAlb.1498$tG5.402@newssvr24.news.prodigy.com ...
> I guess you don't tap your fingers to the music really hard on the
> shifter ****...
>
> cantrellm wrote:
>
> > let me try that again!!
> >
> > http://www.cantrell.com/scrap/shifter21.JPG
>
>
> --
> __________________________________________________ _________
> tw
> 03 TJ Rubicon
> 01 XJ Sport
>
> There is a very fine line between "hobby" and "mental illness."
> -- Dave Barry
>
> Pronunciation: 'jEp
> Function: noun
> Date: 1940
>
> Etymology: probably from g. p. (abbreviation of general purpose)
> A small general-purpose motor vehicle with 80-inch wheelbase,
> 1/4-ton capacity, and four-wheel drive used by the U.S. army in
> World War II.
>
> http://www.7slotgrille.com/jeepers/t...ron/index.html
> (Please remove the OBVIOUS to reply by email)
> __________________________________________________ _________
>
(lol) I do have another one I made with the primers still intacked (bullets
and powder been removed), going to make new shaft for transfer case and put
it on that shaft.
Tom
"twaldron" <twaldron@sbcOBVIOUSglobal.net> wrote in message
news:ucAlb.1498$tG5.402@newssvr24.news.prodigy.com ...
> I guess you don't tap your fingers to the music really hard on the
> shifter ****...
>
> cantrellm wrote:
>
> > let me try that again!!
> >
> > http://www.cantrell.com/scrap/shifter21.JPG
>
>
> --
> __________________________________________________ _________
> tw
> 03 TJ Rubicon
> 01 XJ Sport
>
> There is a very fine line between "hobby" and "mental illness."
> -- Dave Barry
>
> Pronunciation: 'jEp
> Function: noun
> Date: 1940
>
> Etymology: probably from g. p. (abbreviation of general purpose)
> A small general-purpose motor vehicle with 80-inch wheelbase,
> 1/4-ton capacity, and four-wheel drive used by the U.S. army in
> World War II.
>
> http://www.7slotgrille.com/jeepers/t...ron/index.html
> (Please remove the OBVIOUS to reply by email)
> __________________________________________________ _________
>
#62
Guest
Posts: n/a
Re: Good use for scrap metal also
You could probably make a little $$ selling those. Especially with the
popularity of anything that says West Coast Choppers or Jesse James on it.
http://www.westcoastchoppers.com/cars/viper/c.html
"cantrellm" <cantrelm@bellsouth.net> wrote in message
news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> Good job Travis,
>
> check out what I made from scrap at my place of work. We do all stainless
> steel and aluminum work here. this is a polished alum. shift **** I had
> them make out of scrap!!
>
> http://cantrell.com/scrap/shifter21.jpg
>
> Tom Reins
> 2000 TJ Sport
> Just paid off
>
>
> "travis" <travist34removethis@hotmail.com> wrote in message
> news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > They had a pile of "to be thrown away" metal where I work. They had
> > some brackets that are used to rack mount network equipment that was
> > made of some pretty substantial steel. I have two holes in the tub on
> > my CJ, so I measured them and...
> > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > Now I have patches for the holes that I can weld in. Check out how
> > thick they are:
> > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> >
> > After I get them welded in I'm going to scuff up the entire inside of
> > the tub, then wipe it down with acetone, then apply two layers of
> > "Herculiner" the whole shootin' match. I'll take pictures of the
> > progress. I plan on doing this Saturday.
> >
> >
> > --
> > Travis
> > http://jeepadventures.dyndns.org/jeep.html
> > The meek shall inherit the earth. After I'm finished with it.
> > :wq!
>
>
popularity of anything that says West Coast Choppers or Jesse James on it.
http://www.westcoastchoppers.com/cars/viper/c.html
"cantrellm" <cantrelm@bellsouth.net> wrote in message
news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> Good job Travis,
>
> check out what I made from scrap at my place of work. We do all stainless
> steel and aluminum work here. this is a polished alum. shift **** I had
> them make out of scrap!!
>
> http://cantrell.com/scrap/shifter21.jpg
>
> Tom Reins
> 2000 TJ Sport
> Just paid off
>
>
> "travis" <travist34removethis@hotmail.com> wrote in message
> news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > They had a pile of "to be thrown away" metal where I work. They had
> > some brackets that are used to rack mount network equipment that was
> > made of some pretty substantial steel. I have two holes in the tub on
> > my CJ, so I measured them and...
> > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > Now I have patches for the holes that I can weld in. Check out how
> > thick they are:
> > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> >
> > After I get them welded in I'm going to scuff up the entire inside of
> > the tub, then wipe it down with acetone, then apply two layers of
> > "Herculiner" the whole shootin' match. I'll take pictures of the
> > progress. I plan on doing this Saturday.
> >
> >
> > --
> > Travis
> > http://jeepadventures.dyndns.org/jeep.html
> > The meek shall inherit the earth. After I'm finished with it.
> > :wq!
>
>
#63
Guest
Posts: n/a
Re: Good use for scrap metal also
You could probably make a little $$ selling those. Especially with the
popularity of anything that says West Coast Choppers or Jesse James on it.
http://www.westcoastchoppers.com/cars/viper/c.html
"cantrellm" <cantrelm@bellsouth.net> wrote in message
news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> Good job Travis,
>
> check out what I made from scrap at my place of work. We do all stainless
> steel and aluminum work here. this is a polished alum. shift **** I had
> them make out of scrap!!
>
> http://cantrell.com/scrap/shifter21.jpg
>
> Tom Reins
> 2000 TJ Sport
> Just paid off
>
>
> "travis" <travist34removethis@hotmail.com> wrote in message
> news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > They had a pile of "to be thrown away" metal where I work. They had
> > some brackets that are used to rack mount network equipment that was
> > made of some pretty substantial steel. I have two holes in the tub on
> > my CJ, so I measured them and...
> > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > Now I have patches for the holes that I can weld in. Check out how
> > thick they are:
> > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> >
> > After I get them welded in I'm going to scuff up the entire inside of
> > the tub, then wipe it down with acetone, then apply two layers of
> > "Herculiner" the whole shootin' match. I'll take pictures of the
> > progress. I plan on doing this Saturday.
> >
> >
> > --
> > Travis
> > http://jeepadventures.dyndns.org/jeep.html
> > The meek shall inherit the earth. After I'm finished with it.
> > :wq!
>
>
popularity of anything that says West Coast Choppers or Jesse James on it.
http://www.westcoastchoppers.com/cars/viper/c.html
"cantrellm" <cantrelm@bellsouth.net> wrote in message
news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> Good job Travis,
>
> check out what I made from scrap at my place of work. We do all stainless
> steel and aluminum work here. this is a polished alum. shift **** I had
> them make out of scrap!!
>
> http://cantrell.com/scrap/shifter21.jpg
>
> Tom Reins
> 2000 TJ Sport
> Just paid off
>
>
> "travis" <travist34removethis@hotmail.com> wrote in message
> news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > They had a pile of "to be thrown away" metal where I work. They had
> > some brackets that are used to rack mount network equipment that was
> > made of some pretty substantial steel. I have two holes in the tub on
> > my CJ, so I measured them and...
> > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > Now I have patches for the holes that I can weld in. Check out how
> > thick they are:
> > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> >
> > After I get them welded in I'm going to scuff up the entire inside of
> > the tub, then wipe it down with acetone, then apply two layers of
> > "Herculiner" the whole shootin' match. I'll take pictures of the
> > progress. I plan on doing this Saturday.
> >
> >
> > --
> > Travis
> > http://jeepadventures.dyndns.org/jeep.html
> > The meek shall inherit the earth. After I'm finished with it.
> > :wq!
>
>
#64
Guest
Posts: n/a
Re: Good use for scrap metal also
You could probably make a little $$ selling those. Especially with the
popularity of anything that says West Coast Choppers or Jesse James on it.
http://www.westcoastchoppers.com/cars/viper/c.html
"cantrellm" <cantrelm@bellsouth.net> wrote in message
news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> Good job Travis,
>
> check out what I made from scrap at my place of work. We do all stainless
> steel and aluminum work here. this is a polished alum. shift **** I had
> them make out of scrap!!
>
> http://cantrell.com/scrap/shifter21.jpg
>
> Tom Reins
> 2000 TJ Sport
> Just paid off
>
>
> "travis" <travist34removethis@hotmail.com> wrote in message
> news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > They had a pile of "to be thrown away" metal where I work. They had
> > some brackets that are used to rack mount network equipment that was
> > made of some pretty substantial steel. I have two holes in the tub on
> > my CJ, so I measured them and...
> > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > Now I have patches for the holes that I can weld in. Check out how
> > thick they are:
> > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> >
> > After I get them welded in I'm going to scuff up the entire inside of
> > the tub, then wipe it down with acetone, then apply two layers of
> > "Herculiner" the whole shootin' match. I'll take pictures of the
> > progress. I plan on doing this Saturday.
> >
> >
> > --
> > Travis
> > http://jeepadventures.dyndns.org/jeep.html
> > The meek shall inherit the earth. After I'm finished with it.
> > :wq!
>
>
popularity of anything that says West Coast Choppers or Jesse James on it.
http://www.westcoastchoppers.com/cars/viper/c.html
"cantrellm" <cantrelm@bellsouth.net> wrote in message
news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> Good job Travis,
>
> check out what I made from scrap at my place of work. We do all stainless
> steel and aluminum work here. this is a polished alum. shift **** I had
> them make out of scrap!!
>
> http://cantrell.com/scrap/shifter21.jpg
>
> Tom Reins
> 2000 TJ Sport
> Just paid off
>
>
> "travis" <travist34removethis@hotmail.com> wrote in message
> news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > They had a pile of "to be thrown away" metal where I work. They had
> > some brackets that are used to rack mount network equipment that was
> > made of some pretty substantial steel. I have two holes in the tub on
> > my CJ, so I measured them and...
> > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > Now I have patches for the holes that I can weld in. Check out how
> > thick they are:
> > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> >
> > After I get them welded in I'm going to scuff up the entire inside of
> > the tub, then wipe it down with acetone, then apply two layers of
> > "Herculiner" the whole shootin' match. I'll take pictures of the
> > progress. I plan on doing this Saturday.
> >
> >
> > --
> > Travis
> > http://jeepadventures.dyndns.org/jeep.html
> > The meek shall inherit the earth. After I'm finished with it.
> > :wq!
>
>
#65
Guest
Posts: n/a
Re: Good use for scrap metal also
Thanks Bob!
Tom
"bob zee" <cam509@linuxmail.org> wrote in message
news:bn6icn$u1hr8$1@ID-177997.news.uni-berlin.de...
>
> "cantrellm" <cantrelm@bellsouth.net> wrote in message
> news:AGzlb.234$Lj6.127@bignews3.bellsouth.net...
> > let me try that again!!
> >
> > http://www.cantrell.com/scrap/shifter21.JPG
> >
>
>
> now, that is impressive!!!
>
> --
> bob z.
>
> "people with less brain power than you are doing more difficult things
> everyday"©
>
>
Tom
"bob zee" <cam509@linuxmail.org> wrote in message
news:bn6icn$u1hr8$1@ID-177997.news.uni-berlin.de...
>
> "cantrellm" <cantrelm@bellsouth.net> wrote in message
> news:AGzlb.234$Lj6.127@bignews3.bellsouth.net...
> > let me try that again!!
> >
> > http://www.cantrell.com/scrap/shifter21.JPG
> >
>
>
> now, that is impressive!!!
>
> --
> bob z.
>
> "people with less brain power than you are doing more difficult things
> everyday"©
>
>
#66
Guest
Posts: n/a
Re: Good use for scrap metal also
Thanks Bob!
Tom
"bob zee" <cam509@linuxmail.org> wrote in message
news:bn6icn$u1hr8$1@ID-177997.news.uni-berlin.de...
>
> "cantrellm" <cantrelm@bellsouth.net> wrote in message
> news:AGzlb.234$Lj6.127@bignews3.bellsouth.net...
> > let me try that again!!
> >
> > http://www.cantrell.com/scrap/shifter21.JPG
> >
>
>
> now, that is impressive!!!
>
> --
> bob z.
>
> "people with less brain power than you are doing more difficult things
> everyday"©
>
>
Tom
"bob zee" <cam509@linuxmail.org> wrote in message
news:bn6icn$u1hr8$1@ID-177997.news.uni-berlin.de...
>
> "cantrellm" <cantrelm@bellsouth.net> wrote in message
> news:AGzlb.234$Lj6.127@bignews3.bellsouth.net...
> > let me try that again!!
> >
> > http://www.cantrell.com/scrap/shifter21.JPG
> >
>
>
> now, that is impressive!!!
>
> --
> bob z.
>
> "people with less brain power than you are doing more difficult things
> everyday"©
>
>
#67
Guest
Posts: n/a
Re: Good use for scrap metal also
Thanks Bob!
Tom
"bob zee" <cam509@linuxmail.org> wrote in message
news:bn6icn$u1hr8$1@ID-177997.news.uni-berlin.de...
>
> "cantrellm" <cantrelm@bellsouth.net> wrote in message
> news:AGzlb.234$Lj6.127@bignews3.bellsouth.net...
> > let me try that again!!
> >
> > http://www.cantrell.com/scrap/shifter21.JPG
> >
>
>
> now, that is impressive!!!
>
> --
> bob z.
>
> "people with less brain power than you are doing more difficult things
> everyday"©
>
>
Tom
"bob zee" <cam509@linuxmail.org> wrote in message
news:bn6icn$u1hr8$1@ID-177997.news.uni-berlin.de...
>
> "cantrellm" <cantrelm@bellsouth.net> wrote in message
> news:AGzlb.234$Lj6.127@bignews3.bellsouth.net...
> > let me try that again!!
> >
> > http://www.cantrell.com/scrap/shifter21.JPG
> >
>
>
> now, that is impressive!!!
>
> --
> bob z.
>
> "people with less brain power than you are doing more difficult things
> everyday"©
>
>
#68
Guest
Posts: n/a
Re: Good use for scrap metal also
Hey Kevin, that is where I got the idea in the first place. I contacted
the guy who makes Jesse's for him to start with, and he wanted $245.00 to do
it for me. So I got the boys out in our shop to do it for free out of scrap.
Not sure if it would be infringing on his copy right to sell them, as his
stuff he has copy righted is for motorcycles!!
Tom
"Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
news:KRAlb.35$2x5.10350@news.uswest.net...
> You could probably make a little $$ selling those. Especially with the
> popularity of anything that says West Coast Choppers or Jesse James on it.
>
> http://www.westcoastchoppers.com/cars/viper/c.html
>
>
> "cantrellm" <cantrelm@bellsouth.net> wrote in message
> news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> > Good job Travis,
> >
> > check out what I made from scrap at my place of work. We do all
stainless
> > steel and aluminum work here. this is a polished alum. shift **** I had
> > them make out of scrap!!
> >
> > http://cantrell.com/scrap/shifter21.jpg
> >
> > Tom Reins
> > 2000 TJ Sport
> > Just paid off
> >
> >
> > "travis" <travist34removethis@hotmail.com> wrote in message
> > news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > > They had a pile of "to be thrown away" metal where I work. They had
> > > some brackets that are used to rack mount network equipment that was
> > > made of some pretty substantial steel. I have two holes in the tub on
> > > my CJ, so I measured them and...
> > > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > > Now I have patches for the holes that I can weld in. Check out how
> > > thick they are:
> > > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> > >
> > > After I get them welded in I'm going to scuff up the entire inside of
> > > the tub, then wipe it down with acetone, then apply two layers of
> > > "Herculiner" the whole shootin' match. I'll take pictures of the
> > > progress. I plan on doing this Saturday.
> > >
> > >
> > > --
> > > Travis
> > > http://jeepadventures.dyndns.org/jeep.html
> > > The meek shall inherit the earth. After I'm finished with it.
> > > :wq!
> >
> >
>
>
the guy who makes Jesse's for him to start with, and he wanted $245.00 to do
it for me. So I got the boys out in our shop to do it for free out of scrap.
Not sure if it would be infringing on his copy right to sell them, as his
stuff he has copy righted is for motorcycles!!
Tom
"Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
news:KRAlb.35$2x5.10350@news.uswest.net...
> You could probably make a little $$ selling those. Especially with the
> popularity of anything that says West Coast Choppers or Jesse James on it.
>
> http://www.westcoastchoppers.com/cars/viper/c.html
>
>
> "cantrellm" <cantrelm@bellsouth.net> wrote in message
> news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> > Good job Travis,
> >
> > check out what I made from scrap at my place of work. We do all
stainless
> > steel and aluminum work here. this is a polished alum. shift **** I had
> > them make out of scrap!!
> >
> > http://cantrell.com/scrap/shifter21.jpg
> >
> > Tom Reins
> > 2000 TJ Sport
> > Just paid off
> >
> >
> > "travis" <travist34removethis@hotmail.com> wrote in message
> > news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > > They had a pile of "to be thrown away" metal where I work. They had
> > > some brackets that are used to rack mount network equipment that was
> > > made of some pretty substantial steel. I have two holes in the tub on
> > > my CJ, so I measured them and...
> > > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > > Now I have patches for the holes that I can weld in. Check out how
> > > thick they are:
> > > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> > >
> > > After I get them welded in I'm going to scuff up the entire inside of
> > > the tub, then wipe it down with acetone, then apply two layers of
> > > "Herculiner" the whole shootin' match. I'll take pictures of the
> > > progress. I plan on doing this Saturday.
> > >
> > >
> > > --
> > > Travis
> > > http://jeepadventures.dyndns.org/jeep.html
> > > The meek shall inherit the earth. After I'm finished with it.
> > > :wq!
> >
> >
>
>
#69
Guest
Posts: n/a
Re: Good use for scrap metal also
Hey Kevin, that is where I got the idea in the first place. I contacted
the guy who makes Jesse's for him to start with, and he wanted $245.00 to do
it for me. So I got the boys out in our shop to do it for free out of scrap.
Not sure if it would be infringing on his copy right to sell them, as his
stuff he has copy righted is for motorcycles!!
Tom
"Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
news:KRAlb.35$2x5.10350@news.uswest.net...
> You could probably make a little $$ selling those. Especially with the
> popularity of anything that says West Coast Choppers or Jesse James on it.
>
> http://www.westcoastchoppers.com/cars/viper/c.html
>
>
> "cantrellm" <cantrelm@bellsouth.net> wrote in message
> news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> > Good job Travis,
> >
> > check out what I made from scrap at my place of work. We do all
stainless
> > steel and aluminum work here. this is a polished alum. shift **** I had
> > them make out of scrap!!
> >
> > http://cantrell.com/scrap/shifter21.jpg
> >
> > Tom Reins
> > 2000 TJ Sport
> > Just paid off
> >
> >
> > "travis" <travist34removethis@hotmail.com> wrote in message
> > news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > > They had a pile of "to be thrown away" metal where I work. They had
> > > some brackets that are used to rack mount network equipment that was
> > > made of some pretty substantial steel. I have two holes in the tub on
> > > my CJ, so I measured them and...
> > > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > > Now I have patches for the holes that I can weld in. Check out how
> > > thick they are:
> > > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> > >
> > > After I get them welded in I'm going to scuff up the entire inside of
> > > the tub, then wipe it down with acetone, then apply two layers of
> > > "Herculiner" the whole shootin' match. I'll take pictures of the
> > > progress. I plan on doing this Saturday.
> > >
> > >
> > > --
> > > Travis
> > > http://jeepadventures.dyndns.org/jeep.html
> > > The meek shall inherit the earth. After I'm finished with it.
> > > :wq!
> >
> >
>
>
the guy who makes Jesse's for him to start with, and he wanted $245.00 to do
it for me. So I got the boys out in our shop to do it for free out of scrap.
Not sure if it would be infringing on his copy right to sell them, as his
stuff he has copy righted is for motorcycles!!
Tom
"Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
news:KRAlb.35$2x5.10350@news.uswest.net...
> You could probably make a little $$ selling those. Especially with the
> popularity of anything that says West Coast Choppers or Jesse James on it.
>
> http://www.westcoastchoppers.com/cars/viper/c.html
>
>
> "cantrellm" <cantrelm@bellsouth.net> wrote in message
> news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> > Good job Travis,
> >
> > check out what I made from scrap at my place of work. We do all
stainless
> > steel and aluminum work here. this is a polished alum. shift **** I had
> > them make out of scrap!!
> >
> > http://cantrell.com/scrap/shifter21.jpg
> >
> > Tom Reins
> > 2000 TJ Sport
> > Just paid off
> >
> >
> > "travis" <travist34removethis@hotmail.com> wrote in message
> > news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > > They had a pile of "to be thrown away" metal where I work. They had
> > > some brackets that are used to rack mount network equipment that was
> > > made of some pretty substantial steel. I have two holes in the tub on
> > > my CJ, so I measured them and...
> > > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > > Now I have patches for the holes that I can weld in. Check out how
> > > thick they are:
> > > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> > >
> > > After I get them welded in I'm going to scuff up the entire inside of
> > > the tub, then wipe it down with acetone, then apply two layers of
> > > "Herculiner" the whole shootin' match. I'll take pictures of the
> > > progress. I plan on doing this Saturday.
> > >
> > >
> > > --
> > > Travis
> > > http://jeepadventures.dyndns.org/jeep.html
> > > The meek shall inherit the earth. After I'm finished with it.
> > > :wq!
> >
> >
>
>
#70
Guest
Posts: n/a
Re: Good use for scrap metal also
Hey Kevin, that is where I got the idea in the first place. I contacted
the guy who makes Jesse's for him to start with, and he wanted $245.00 to do
it for me. So I got the boys out in our shop to do it for free out of scrap.
Not sure if it would be infringing on his copy right to sell them, as his
stuff he has copy righted is for motorcycles!!
Tom
"Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
news:KRAlb.35$2x5.10350@news.uswest.net...
> You could probably make a little $$ selling those. Especially with the
> popularity of anything that says West Coast Choppers or Jesse James on it.
>
> http://www.westcoastchoppers.com/cars/viper/c.html
>
>
> "cantrellm" <cantrelm@bellsouth.net> wrote in message
> news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> > Good job Travis,
> >
> > check out what I made from scrap at my place of work. We do all
stainless
> > steel and aluminum work here. this is a polished alum. shift **** I had
> > them make out of scrap!!
> >
> > http://cantrell.com/scrap/shifter21.jpg
> >
> > Tom Reins
> > 2000 TJ Sport
> > Just paid off
> >
> >
> > "travis" <travist34removethis@hotmail.com> wrote in message
> > news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > > They had a pile of "to be thrown away" metal where I work. They had
> > > some brackets that are used to rack mount network equipment that was
> > > made of some pretty substantial steel. I have two holes in the tub on
> > > my CJ, so I measured them and...
> > > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > > Now I have patches for the holes that I can weld in. Check out how
> > > thick they are:
> > > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> > >
> > > After I get them welded in I'm going to scuff up the entire inside of
> > > the tub, then wipe it down with acetone, then apply two layers of
> > > "Herculiner" the whole shootin' match. I'll take pictures of the
> > > progress. I plan on doing this Saturday.
> > >
> > >
> > > --
> > > Travis
> > > http://jeepadventures.dyndns.org/jeep.html
> > > The meek shall inherit the earth. After I'm finished with it.
> > > :wq!
> >
> >
>
>
the guy who makes Jesse's for him to start with, and he wanted $245.00 to do
it for me. So I got the boys out in our shop to do it for free out of scrap.
Not sure if it would be infringing on his copy right to sell them, as his
stuff he has copy righted is for motorcycles!!
Tom
"Kevin Sperle" <ksperle@nospam.hotmail.com> wrote in message
news:KRAlb.35$2x5.10350@news.uswest.net...
> You could probably make a little $$ selling those. Especially with the
> popularity of anything that says West Coast Choppers or Jesse James on it.
>
> http://www.westcoastchoppers.com/cars/viper/c.html
>
>
> "cantrellm" <cantrelm@bellsouth.net> wrote in message
> news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> > Good job Travis,
> >
> > check out what I made from scrap at my place of work. We do all
stainless
> > steel and aluminum work here. this is a polished alum. shift **** I had
> > them make out of scrap!!
> >
> > http://cantrell.com/scrap/shifter21.jpg
> >
> > Tom Reins
> > 2000 TJ Sport
> > Just paid off
> >
> >
> > "travis" <travist34removethis@hotmail.com> wrote in message
> > news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > > They had a pile of "to be thrown away" metal where I work. They had
> > > some brackets that are used to rack mount network equipment that was
> > > made of some pretty substantial steel. I have two holes in the tub on
> > > my CJ, so I measured them and...
> > > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > > Now I have patches for the holes that I can weld in. Check out how
> > > thick they are:
> > > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> > >
> > > After I get them welded in I'm going to scuff up the entire inside of
> > > the tub, then wipe it down with acetone, then apply two layers of
> > > "Herculiner" the whole shootin' match. I'll take pictures of the
> > > progress. I plan on doing this Saturday.
> > >
> > >
> > > --
> > > Travis
> > > http://jeepadventures.dyndns.org/jeep.html
> > > The meek shall inherit the earth. After I'm finished with it.
> > > :wq!
> >
> >
>
>