Good use for scrap metal
#131
Guest
Posts: n/a
Re: Good use for scrap metal
:-) OK, I don't feel too bad about that. It wouldn't fit my jeeps, anyway.
--
Jim
--
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"You can do any job in the world with the wrong tool if you try hard
enough..."
"travis" <travist34removethis@hotmail.com> wrote in message
news:4hsdpvskdruk9cm0i6ga8hekn3oti52t3l@4ax.com...
> On Wed, 22 Oct 2003 13:50:06 -0400, "TJim" <jim@ranlet.nospam.com>
> shared the following:
>
> >Jeez, Travis! Cut that out! I don't have the budget for parts right now
> >and you're making me feel all frustrated!
> >
> >What else did you order??? Can I see? ;-)
> >
> >--
> >Jim
>
> Only this: :-)
>
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2437436809
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
--
Jim
--
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"You can do any job in the world with the wrong tool if you try hard
enough..."
"travis" <travist34removethis@hotmail.com> wrote in message
news:4hsdpvskdruk9cm0i6ga8hekn3oti52t3l@4ax.com...
> On Wed, 22 Oct 2003 13:50:06 -0400, "TJim" <jim@ranlet.nospam.com>
> shared the following:
>
> >Jeez, Travis! Cut that out! I don't have the budget for parts right now
> >and you're making me feel all frustrated!
> >
> >What else did you order??? Can I see? ;-)
> >
> >--
> >Jim
>
> Only this: :-)
>
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2437436809
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
#132
Guest
Posts: n/a
Re: Good use for scrap metal
:-) OK, I don't feel too bad about that. It wouldn't fit my jeeps, anyway.
--
Jim
--
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"You can do any job in the world with the wrong tool if you try hard
enough..."
"travis" <travist34removethis@hotmail.com> wrote in message
news:4hsdpvskdruk9cm0i6ga8hekn3oti52t3l@4ax.com...
> On Wed, 22 Oct 2003 13:50:06 -0400, "TJim" <jim@ranlet.nospam.com>
> shared the following:
>
> >Jeez, Travis! Cut that out! I don't have the budget for parts right now
> >and you're making me feel all frustrated!
> >
> >What else did you order??? Can I see? ;-)
> >
> >--
> >Jim
>
> Only this: :-)
>
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2437436809
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
--
Jim
--
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"You can do any job in the world with the wrong tool if you try hard
enough..."
"travis" <travist34removethis@hotmail.com> wrote in message
news:4hsdpvskdruk9cm0i6ga8hekn3oti52t3l@4ax.com...
> On Wed, 22 Oct 2003 13:50:06 -0400, "TJim" <jim@ranlet.nospam.com>
> shared the following:
>
> >Jeez, Travis! Cut that out! I don't have the budget for parts right now
> >and you're making me feel all frustrated!
> >
> >What else did you order??? Can I see? ;-)
> >
> >--
> >Jim
>
> Only this: :-)
>
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2437436809
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
#133
Guest
Posts: n/a
Re: Good use for scrap metal
:-) OK, I don't feel too bad about that. It wouldn't fit my jeeps, anyway.
--
Jim
--
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"You can do any job in the world with the wrong tool if you try hard
enough..."
"travis" <travist34removethis@hotmail.com> wrote in message
news:4hsdpvskdruk9cm0i6ga8hekn3oti52t3l@4ax.com...
> On Wed, 22 Oct 2003 13:50:06 -0400, "TJim" <jim@ranlet.nospam.com>
> shared the following:
>
> >Jeez, Travis! Cut that out! I don't have the budget for parts right now
> >and you're making me feel all frustrated!
> >
> >What else did you order??? Can I see? ;-)
> >
> >--
> >Jim
>
> Only this: :-)
>
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2437436809
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
--
Jim
--
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"You can do any job in the world with the wrong tool if you try hard
enough..."
"travis" <travist34removethis@hotmail.com> wrote in message
news:4hsdpvskdruk9cm0i6ga8hekn3oti52t3l@4ax.com...
> On Wed, 22 Oct 2003 13:50:06 -0400, "TJim" <jim@ranlet.nospam.com>
> shared the following:
>
> >Jeez, Travis! Cut that out! I don't have the budget for parts right now
> >and you're making me feel all frustrated!
> >
> >What else did you order??? Can I see? ;-)
> >
> >--
> >Jim
>
> Only this: :-)
>
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2437436809
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
#134
Guest
Posts: n/a
Re: Good use for scrap metal
On Wed, 22 Oct 2003 20:37:27 -0400, "TJim" <jim@ranlet.nospam.com>
shared the following:
>:-) OK, I don't feel too bad about that. It wouldn't fit my jeeps, anyway.
>
>--
>Jim
Fair enough. :-) Just wish me luck making this part work for me!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
shared the following:
>:-) OK, I don't feel too bad about that. It wouldn't fit my jeeps, anyway.
>
>--
>Jim
Fair enough. :-) Just wish me luck making this part work for me!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
#135
Guest
Posts: n/a
Re: Good use for scrap metal
On Wed, 22 Oct 2003 20:37:27 -0400, "TJim" <jim@ranlet.nospam.com>
shared the following:
>:-) OK, I don't feel too bad about that. It wouldn't fit my jeeps, anyway.
>
>--
>Jim
Fair enough. :-) Just wish me luck making this part work for me!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
shared the following:
>:-) OK, I don't feel too bad about that. It wouldn't fit my jeeps, anyway.
>
>--
>Jim
Fair enough. :-) Just wish me luck making this part work for me!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
#136
Guest
Posts: n/a
Re: Good use for scrap metal
On Wed, 22 Oct 2003 20:37:27 -0400, "TJim" <jim@ranlet.nospam.com>
shared the following:
>:-) OK, I don't feel too bad about that. It wouldn't fit my jeeps, anyway.
>
>--
>Jim
Fair enough. :-) Just wish me luck making this part work for me!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
shared the following:
>:-) OK, I don't feel too bad about that. It wouldn't fit my jeeps, anyway.
>
>--
>Jim
Fair enough. :-) Just wish me luck making this part work for me!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
#137
Guest
Posts: n/a
Re: Good use for scrap metal
Good luck.
--
Jim
--
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"You can do any job in the world with the wrong tool if you try hard
enough..."
"travis" <travist34removethis@hotmail.com> wrote in message
news:7u8epvgrsobefo1ohaahviakkjevmcdfq1@4ax.com...
> On Wed, 22 Oct 2003 20:37:27 -0400, "TJim" <jim@ranlet.nospam.com>
> shared the following:
>
> >:-) OK, I don't feel too bad about that. It wouldn't fit my jeeps,
anyway.
> >
> >--
> >Jim
>
> Fair enough. :-) Just wish me luck making this part work for me!
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
--
Jim
--
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"You can do any job in the world with the wrong tool if you try hard
enough..."
"travis" <travist34removethis@hotmail.com> wrote in message
news:7u8epvgrsobefo1ohaahviakkjevmcdfq1@4ax.com...
> On Wed, 22 Oct 2003 20:37:27 -0400, "TJim" <jim@ranlet.nospam.com>
> shared the following:
>
> >:-) OK, I don't feel too bad about that. It wouldn't fit my jeeps,
anyway.
> >
> >--
> >Jim
>
> Fair enough. :-) Just wish me luck making this part work for me!
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
#138
Guest
Posts: n/a
Re: Good use for scrap metal
Good luck.
--
Jim
--
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"You can do any job in the world with the wrong tool if you try hard
enough..."
"travis" <travist34removethis@hotmail.com> wrote in message
news:7u8epvgrsobefo1ohaahviakkjevmcdfq1@4ax.com...
> On Wed, 22 Oct 2003 20:37:27 -0400, "TJim" <jim@ranlet.nospam.com>
> shared the following:
>
> >:-) OK, I don't feel too bad about that. It wouldn't fit my jeeps,
anyway.
> >
> >--
> >Jim
>
> Fair enough. :-) Just wish me luck making this part work for me!
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
--
Jim
--
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"You can do any job in the world with the wrong tool if you try hard
enough..."
"travis" <travist34removethis@hotmail.com> wrote in message
news:7u8epvgrsobefo1ohaahviakkjevmcdfq1@4ax.com...
> On Wed, 22 Oct 2003 20:37:27 -0400, "TJim" <jim@ranlet.nospam.com>
> shared the following:
>
> >:-) OK, I don't feel too bad about that. It wouldn't fit my jeeps,
anyway.
> >
> >--
> >Jim
>
> Fair enough. :-) Just wish me luck making this part work for me!
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
#139
Guest
Posts: n/a
Re: Good use for scrap metal
Good luck.
--
Jim
--
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"You can do any job in the world with the wrong tool if you try hard
enough..."
"travis" <travist34removethis@hotmail.com> wrote in message
news:7u8epvgrsobefo1ohaahviakkjevmcdfq1@4ax.com...
> On Wed, 22 Oct 2003 20:37:27 -0400, "TJim" <jim@ranlet.nospam.com>
> shared the following:
>
> >:-) OK, I don't feel too bad about that. It wouldn't fit my jeeps,
anyway.
> >
> >--
> >Jim
>
> Fair enough. :-) Just wish me luck making this part work for me!
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
--
Jim
--
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"You can do any job in the world with the wrong tool if you try hard
enough..."
"travis" <travist34removethis@hotmail.com> wrote in message
news:7u8epvgrsobefo1ohaahviakkjevmcdfq1@4ax.com...
> On Wed, 22 Oct 2003 20:37:27 -0400, "TJim" <jim@ranlet.nospam.com>
> shared the following:
>
> >:-) OK, I don't feel too bad about that. It wouldn't fit my jeeps,
anyway.
> >
> >--
> >Jim
>
> Fair enough. :-) Just wish me luck making this part work for me!
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)