Good use for scrap metal
#31
Guest
Posts: n/a
Re: Good use for scrap metal also
Your link doesn't work.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
cantrellm wrote:
>
> Good job Travis,
>
> check out what I made from scrap at my place of work. We do all stainless
> steel and aluminum work here. this is a polished alum. shift **** I had
> them make out of scrap!!
>
> http://cantrell.com/scrap/shifter21.jpg
>
> Tom Reins
> 2000 TJ Sport
> Just paid off
>
> "travis" <travist34removethis@hotmail.com> wrote in message
> news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > They had a pile of "to be thrown away" metal where I work. They had
> > some brackets that are used to rack mount network equipment that was
> > made of some pretty substantial steel. I have two holes in the tub on
> > my CJ, so I measured them and...
> > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > Now I have patches for the holes that I can weld in. Check out how
> > thick they are:
> > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> >
> > After I get them welded in I'm going to scuff up the entire inside of
> > the tub, then wipe it down with acetone, then apply two layers of
> > "Herculiner" the whole shootin' match. I'll take pictures of the
> > progress. I plan on doing this Saturday.
> >
> >
> > --
> > Travis
> > http://jeepadventures.dyndns.org/jeep.html
> > The meek shall inherit the earth. After I'm finished with it.
> > :wq!
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
cantrellm wrote:
>
> Good job Travis,
>
> check out what I made from scrap at my place of work. We do all stainless
> steel and aluminum work here. this is a polished alum. shift **** I had
> them make out of scrap!!
>
> http://cantrell.com/scrap/shifter21.jpg
>
> Tom Reins
> 2000 TJ Sport
> Just paid off
>
> "travis" <travist34removethis@hotmail.com> wrote in message
> news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > They had a pile of "to be thrown away" metal where I work. They had
> > some brackets that are used to rack mount network equipment that was
> > made of some pretty substantial steel. I have two holes in the tub on
> > my CJ, so I measured them and...
> > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > Now I have patches for the holes that I can weld in. Check out how
> > thick they are:
> > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> >
> > After I get them welded in I'm going to scuff up the entire inside of
> > the tub, then wipe it down with acetone, then apply two layers of
> > "Herculiner" the whole shootin' match. I'll take pictures of the
> > progress. I plan on doing this Saturday.
> >
> >
> > --
> > Travis
> > http://jeepadventures.dyndns.org/jeep.html
> > The meek shall inherit the earth. After I'm finished with it.
> > :wq!
#32
Guest
Posts: n/a
Re: Good use for scrap metal also
LOL!
Now that is an original, for sure!
Looks sharp, not really to my taste, (non hunter) but nice all the same.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
cantrellm wrote:
>
> let me try that again!!
>
> http://www.cantrell.com/scrap/shifter21.JPG
>
> "cantrellm" <cantrelm@bellsouth.net> wrote in message
> news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> > Good job Travis,
> >
> > check out what I made from scrap at my place of work. We do all stainless
> > steel and aluminum work here. this is a polished alum. shift **** I had
> > them make out of scrap!!
> >
> > http://cantrell.com/scrap/shifter21.jpg
> >
> > Tom Reins
> > 2000 TJ Sport
> > Just paid off
> >
> >
> > "travis" <travist34removethis@hotmail.com> wrote in message
> > news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > > They had a pile of "to be thrown away" metal where I work. They had
> > > some brackets that are used to rack mount network equipment that was
> > > made of some pretty substantial steel. I have two holes in the tub on
> > > my CJ, so I measured them and...
> > > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > > Now I have patches for the holes that I can weld in. Check out how
> > > thick they are:
> > > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> > >
> > > After I get them welded in I'm going to scuff up the entire inside of
> > > the tub, then wipe it down with acetone, then apply two layers of
> > > "Herculiner" the whole shootin' match. I'll take pictures of the
> > > progress. I plan on doing this Saturday.
> > >
> > >
> > > --
> > > Travis
> > > http://jeepadventures.dyndns.org/jeep.html
> > > The meek shall inherit the earth. After I'm finished with it.
> > > :wq!
> >
> >
Now that is an original, for sure!
Looks sharp, not really to my taste, (non hunter) but nice all the same.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
cantrellm wrote:
>
> let me try that again!!
>
> http://www.cantrell.com/scrap/shifter21.JPG
>
> "cantrellm" <cantrelm@bellsouth.net> wrote in message
> news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> > Good job Travis,
> >
> > check out what I made from scrap at my place of work. We do all stainless
> > steel and aluminum work here. this is a polished alum. shift **** I had
> > them make out of scrap!!
> >
> > http://cantrell.com/scrap/shifter21.jpg
> >
> > Tom Reins
> > 2000 TJ Sport
> > Just paid off
> >
> >
> > "travis" <travist34removethis@hotmail.com> wrote in message
> > news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > > They had a pile of "to be thrown away" metal where I work. They had
> > > some brackets that are used to rack mount network equipment that was
> > > made of some pretty substantial steel. I have two holes in the tub on
> > > my CJ, so I measured them and...
> > > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > > Now I have patches for the holes that I can weld in. Check out how
> > > thick they are:
> > > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> > >
> > > After I get them welded in I'm going to scuff up the entire inside of
> > > the tub, then wipe it down with acetone, then apply two layers of
> > > "Herculiner" the whole shootin' match. I'll take pictures of the
> > > progress. I plan on doing this Saturday.
> > >
> > >
> > > --
> > > Travis
> > > http://jeepadventures.dyndns.org/jeep.html
> > > The meek shall inherit the earth. After I'm finished with it.
> > > :wq!
> >
> >
#33
Guest
Posts: n/a
Re: Good use for scrap metal also
LOL!
Now that is an original, for sure!
Looks sharp, not really to my taste, (non hunter) but nice all the same.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
cantrellm wrote:
>
> let me try that again!!
>
> http://www.cantrell.com/scrap/shifter21.JPG
>
> "cantrellm" <cantrelm@bellsouth.net> wrote in message
> news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> > Good job Travis,
> >
> > check out what I made from scrap at my place of work. We do all stainless
> > steel and aluminum work here. this is a polished alum. shift **** I had
> > them make out of scrap!!
> >
> > http://cantrell.com/scrap/shifter21.jpg
> >
> > Tom Reins
> > 2000 TJ Sport
> > Just paid off
> >
> >
> > "travis" <travist34removethis@hotmail.com> wrote in message
> > news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > > They had a pile of "to be thrown away" metal where I work. They had
> > > some brackets that are used to rack mount network equipment that was
> > > made of some pretty substantial steel. I have two holes in the tub on
> > > my CJ, so I measured them and...
> > > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > > Now I have patches for the holes that I can weld in. Check out how
> > > thick they are:
> > > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> > >
> > > After I get them welded in I'm going to scuff up the entire inside of
> > > the tub, then wipe it down with acetone, then apply two layers of
> > > "Herculiner" the whole shootin' match. I'll take pictures of the
> > > progress. I plan on doing this Saturday.
> > >
> > >
> > > --
> > > Travis
> > > http://jeepadventures.dyndns.org/jeep.html
> > > The meek shall inherit the earth. After I'm finished with it.
> > > :wq!
> >
> >
Now that is an original, for sure!
Looks sharp, not really to my taste, (non hunter) but nice all the same.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
cantrellm wrote:
>
> let me try that again!!
>
> http://www.cantrell.com/scrap/shifter21.JPG
>
> "cantrellm" <cantrelm@bellsouth.net> wrote in message
> news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> > Good job Travis,
> >
> > check out what I made from scrap at my place of work. We do all stainless
> > steel and aluminum work here. this is a polished alum. shift **** I had
> > them make out of scrap!!
> >
> > http://cantrell.com/scrap/shifter21.jpg
> >
> > Tom Reins
> > 2000 TJ Sport
> > Just paid off
> >
> >
> > "travis" <travist34removethis@hotmail.com> wrote in message
> > news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > > They had a pile of "to be thrown away" metal where I work. They had
> > > some brackets that are used to rack mount network equipment that was
> > > made of some pretty substantial steel. I have two holes in the tub on
> > > my CJ, so I measured them and...
> > > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > > Now I have patches for the holes that I can weld in. Check out how
> > > thick they are:
> > > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> > >
> > > After I get them welded in I'm going to scuff up the entire inside of
> > > the tub, then wipe it down with acetone, then apply two layers of
> > > "Herculiner" the whole shootin' match. I'll take pictures of the
> > > progress. I plan on doing this Saturday.
> > >
> > >
> > > --
> > > Travis
> > > http://jeepadventures.dyndns.org/jeep.html
> > > The meek shall inherit the earth. After I'm finished with it.
> > > :wq!
> >
> >
#34
Guest
Posts: n/a
Re: Good use for scrap metal also
LOL!
Now that is an original, for sure!
Looks sharp, not really to my taste, (non hunter) but nice all the same.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
cantrellm wrote:
>
> let me try that again!!
>
> http://www.cantrell.com/scrap/shifter21.JPG
>
> "cantrellm" <cantrelm@bellsouth.net> wrote in message
> news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> > Good job Travis,
> >
> > check out what I made from scrap at my place of work. We do all stainless
> > steel and aluminum work here. this is a polished alum. shift **** I had
> > them make out of scrap!!
> >
> > http://cantrell.com/scrap/shifter21.jpg
> >
> > Tom Reins
> > 2000 TJ Sport
> > Just paid off
> >
> >
> > "travis" <travist34removethis@hotmail.com> wrote in message
> > news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > > They had a pile of "to be thrown away" metal where I work. They had
> > > some brackets that are used to rack mount network equipment that was
> > > made of some pretty substantial steel. I have two holes in the tub on
> > > my CJ, so I measured them and...
> > > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > > Now I have patches for the holes that I can weld in. Check out how
> > > thick they are:
> > > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> > >
> > > After I get them welded in I'm going to scuff up the entire inside of
> > > the tub, then wipe it down with acetone, then apply two layers of
> > > "Herculiner" the whole shootin' match. I'll take pictures of the
> > > progress. I plan on doing this Saturday.
> > >
> > >
> > > --
> > > Travis
> > > http://jeepadventures.dyndns.org/jeep.html
> > > The meek shall inherit the earth. After I'm finished with it.
> > > :wq!
> >
> >
Now that is an original, for sure!
Looks sharp, not really to my taste, (non hunter) but nice all the same.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
cantrellm wrote:
>
> let me try that again!!
>
> http://www.cantrell.com/scrap/shifter21.JPG
>
> "cantrellm" <cantrelm@bellsouth.net> wrote in message
> news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> > Good job Travis,
> >
> > check out what I made from scrap at my place of work. We do all stainless
> > steel and aluminum work here. this is a polished alum. shift **** I had
> > them make out of scrap!!
> >
> > http://cantrell.com/scrap/shifter21.jpg
> >
> > Tom Reins
> > 2000 TJ Sport
> > Just paid off
> >
> >
> > "travis" <travist34removethis@hotmail.com> wrote in message
> > news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > > They had a pile of "to be thrown away" metal where I work. They had
> > > some brackets that are used to rack mount network equipment that was
> > > made of some pretty substantial steel. I have two holes in the tub on
> > > my CJ, so I measured them and...
> > > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > > Now I have patches for the holes that I can weld in. Check out how
> > > thick they are:
> > > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> > >
> > > After I get them welded in I'm going to scuff up the entire inside of
> > > the tub, then wipe it down with acetone, then apply two layers of
> > > "Herculiner" the whole shootin' match. I'll take pictures of the
> > > progress. I plan on doing this Saturday.
> > >
> > >
> > > --
> > > Travis
> > > http://jeepadventures.dyndns.org/jeep.html
> > > The meek shall inherit the earth. After I'm finished with it.
> > > :wq!
> >
> >
#35
Guest
Posts: n/a
Re: Good use for scrap metal also
Good job Travis,
check out what I made from scrap at my place of work. We do all stainless
steel and aluminum work here. this is a polished alum. shift **** I had
them make out of scrap!!
http://cantrell.com/scrap/shifter21.jpg
Tom Reins
2000 TJ Sport
Just paid off
"travis" <travist34removethis@hotmail.com> wrote in message
news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> They had a pile of "to be thrown away" metal where I work. They had
> some brackets that are used to rack mount network equipment that was
> made of some pretty substantial steel. I have two holes in the tub on
> my CJ, so I measured them and...
> http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> Now I have patches for the holes that I can weld in. Check out how
> thick they are:
> http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
>
> After I get them welded in I'm going to scuff up the entire inside of
> the tub, then wipe it down with acetone, then apply two layers of
> "Herculiner" the whole shootin' match. I'll take pictures of the
> progress. I plan on doing this Saturday.
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
check out what I made from scrap at my place of work. We do all stainless
steel and aluminum work here. this is a polished alum. shift **** I had
them make out of scrap!!
http://cantrell.com/scrap/shifter21.jpg
Tom Reins
2000 TJ Sport
Just paid off
"travis" <travist34removethis@hotmail.com> wrote in message
news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> They had a pile of "to be thrown away" metal where I work. They had
> some brackets that are used to rack mount network equipment that was
> made of some pretty substantial steel. I have two holes in the tub on
> my CJ, so I measured them and...
> http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> Now I have patches for the holes that I can weld in. Check out how
> thick they are:
> http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
>
> After I get them welded in I'm going to scuff up the entire inside of
> the tub, then wipe it down with acetone, then apply two layers of
> "Herculiner" the whole shootin' match. I'll take pictures of the
> progress. I plan on doing this Saturday.
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
#36
Guest
Posts: n/a
Re: Good use for scrap metal also
Good job Travis,
check out what I made from scrap at my place of work. We do all stainless
steel and aluminum work here. this is a polished alum. shift **** I had
them make out of scrap!!
http://cantrell.com/scrap/shifter21.jpg
Tom Reins
2000 TJ Sport
Just paid off
"travis" <travist34removethis@hotmail.com> wrote in message
news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> They had a pile of "to be thrown away" metal where I work. They had
> some brackets that are used to rack mount network equipment that was
> made of some pretty substantial steel. I have two holes in the tub on
> my CJ, so I measured them and...
> http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> Now I have patches for the holes that I can weld in. Check out how
> thick they are:
> http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
>
> After I get them welded in I'm going to scuff up the entire inside of
> the tub, then wipe it down with acetone, then apply two layers of
> "Herculiner" the whole shootin' match. I'll take pictures of the
> progress. I plan on doing this Saturday.
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
check out what I made from scrap at my place of work. We do all stainless
steel and aluminum work here. this is a polished alum. shift **** I had
them make out of scrap!!
http://cantrell.com/scrap/shifter21.jpg
Tom Reins
2000 TJ Sport
Just paid off
"travis" <travist34removethis@hotmail.com> wrote in message
news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> They had a pile of "to be thrown away" metal where I work. They had
> some brackets that are used to rack mount network equipment that was
> made of some pretty substantial steel. I have two holes in the tub on
> my CJ, so I measured them and...
> http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> Now I have patches for the holes that I can weld in. Check out how
> thick they are:
> http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
>
> After I get them welded in I'm going to scuff up the entire inside of
> the tub, then wipe it down with acetone, then apply two layers of
> "Herculiner" the whole shootin' match. I'll take pictures of the
> progress. I plan on doing this Saturday.
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
#37
Guest
Posts: n/a
Re: Good use for scrap metal also
Good job Travis,
check out what I made from scrap at my place of work. We do all stainless
steel and aluminum work here. this is a polished alum. shift **** I had
them make out of scrap!!
http://cantrell.com/scrap/shifter21.jpg
Tom Reins
2000 TJ Sport
Just paid off
"travis" <travist34removethis@hotmail.com> wrote in message
news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> They had a pile of "to be thrown away" metal where I work. They had
> some brackets that are used to rack mount network equipment that was
> made of some pretty substantial steel. I have two holes in the tub on
> my CJ, so I measured them and...
> http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> Now I have patches for the holes that I can weld in. Check out how
> thick they are:
> http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
>
> After I get them welded in I'm going to scuff up the entire inside of
> the tub, then wipe it down with acetone, then apply two layers of
> "Herculiner" the whole shootin' match. I'll take pictures of the
> progress. I plan on doing this Saturday.
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
check out what I made from scrap at my place of work. We do all stainless
steel and aluminum work here. this is a polished alum. shift **** I had
them make out of scrap!!
http://cantrell.com/scrap/shifter21.jpg
Tom Reins
2000 TJ Sport
Just paid off
"travis" <travist34removethis@hotmail.com> wrote in message
news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> They had a pile of "to be thrown away" metal where I work. They had
> some brackets that are used to rack mount network equipment that was
> made of some pretty substantial steel. I have two holes in the tub on
> my CJ, so I measured them and...
> http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> Now I have patches for the holes that I can weld in. Check out how
> thick they are:
> http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
>
> After I get them welded in I'm going to scuff up the entire inside of
> the tub, then wipe it down with acetone, then apply two layers of
> "Herculiner" the whole shootin' match. I'll take pictures of the
> progress. I plan on doing this Saturday.
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
#38
Guest
Posts: n/a
Re: Good use for scrap metal also
let me try that again!!
http://www.cantrell.com/scrap/shifter21.JPG
"cantrellm" <cantrelm@bellsouth.net> wrote in message
news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> Good job Travis,
>
> check out what I made from scrap at my place of work. We do all stainless
> steel and aluminum work here. this is a polished alum. shift **** I had
> them make out of scrap!!
>
> http://cantrell.com/scrap/shifter21.jpg
>
> Tom Reins
> 2000 TJ Sport
> Just paid off
>
>
> "travis" <travist34removethis@hotmail.com> wrote in message
> news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > They had a pile of "to be thrown away" metal where I work. They had
> > some brackets that are used to rack mount network equipment that was
> > made of some pretty substantial steel. I have two holes in the tub on
> > my CJ, so I measured them and...
> > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > Now I have patches for the holes that I can weld in. Check out how
> > thick they are:
> > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> >
> > After I get them welded in I'm going to scuff up the entire inside of
> > the tub, then wipe it down with acetone, then apply two layers of
> > "Herculiner" the whole shootin' match. I'll take pictures of the
> > progress. I plan on doing this Saturday.
> >
> >
> > --
> > Travis
> > http://jeepadventures.dyndns.org/jeep.html
> > The meek shall inherit the earth. After I'm finished with it.
> > :wq!
>
>
http://www.cantrell.com/scrap/shifter21.JPG
"cantrellm" <cantrelm@bellsouth.net> wrote in message
news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> Good job Travis,
>
> check out what I made from scrap at my place of work. We do all stainless
> steel and aluminum work here. this is a polished alum. shift **** I had
> them make out of scrap!!
>
> http://cantrell.com/scrap/shifter21.jpg
>
> Tom Reins
> 2000 TJ Sport
> Just paid off
>
>
> "travis" <travist34removethis@hotmail.com> wrote in message
> news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > They had a pile of "to be thrown away" metal where I work. They had
> > some brackets that are used to rack mount network equipment that was
> > made of some pretty substantial steel. I have two holes in the tub on
> > my CJ, so I measured them and...
> > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > Now I have patches for the holes that I can weld in. Check out how
> > thick they are:
> > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> >
> > After I get them welded in I'm going to scuff up the entire inside of
> > the tub, then wipe it down with acetone, then apply two layers of
> > "Herculiner" the whole shootin' match. I'll take pictures of the
> > progress. I plan on doing this Saturday.
> >
> >
> > --
> > Travis
> > http://jeepadventures.dyndns.org/jeep.html
> > The meek shall inherit the earth. After I'm finished with it.
> > :wq!
>
>
#39
Guest
Posts: n/a
Re: Good use for scrap metal also
let me try that again!!
http://www.cantrell.com/scrap/shifter21.JPG
"cantrellm" <cantrelm@bellsouth.net> wrote in message
news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> Good job Travis,
>
> check out what I made from scrap at my place of work. We do all stainless
> steel and aluminum work here. this is a polished alum. shift **** I had
> them make out of scrap!!
>
> http://cantrell.com/scrap/shifter21.jpg
>
> Tom Reins
> 2000 TJ Sport
> Just paid off
>
>
> "travis" <travist34removethis@hotmail.com> wrote in message
> news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > They had a pile of "to be thrown away" metal where I work. They had
> > some brackets that are used to rack mount network equipment that was
> > made of some pretty substantial steel. I have two holes in the tub on
> > my CJ, so I measured them and...
> > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > Now I have patches for the holes that I can weld in. Check out how
> > thick they are:
> > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> >
> > After I get them welded in I'm going to scuff up the entire inside of
> > the tub, then wipe it down with acetone, then apply two layers of
> > "Herculiner" the whole shootin' match. I'll take pictures of the
> > progress. I plan on doing this Saturday.
> >
> >
> > --
> > Travis
> > http://jeepadventures.dyndns.org/jeep.html
> > The meek shall inherit the earth. After I'm finished with it.
> > :wq!
>
>
http://www.cantrell.com/scrap/shifter21.JPG
"cantrellm" <cantrelm@bellsouth.net> wrote in message
news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> Good job Travis,
>
> check out what I made from scrap at my place of work. We do all stainless
> steel and aluminum work here. this is a polished alum. shift **** I had
> them make out of scrap!!
>
> http://cantrell.com/scrap/shifter21.jpg
>
> Tom Reins
> 2000 TJ Sport
> Just paid off
>
>
> "travis" <travist34removethis@hotmail.com> wrote in message
> news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > They had a pile of "to be thrown away" metal where I work. They had
> > some brackets that are used to rack mount network equipment that was
> > made of some pretty substantial steel. I have two holes in the tub on
> > my CJ, so I measured them and...
> > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > Now I have patches for the holes that I can weld in. Check out how
> > thick they are:
> > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> >
> > After I get them welded in I'm going to scuff up the entire inside of
> > the tub, then wipe it down with acetone, then apply two layers of
> > "Herculiner" the whole shootin' match. I'll take pictures of the
> > progress. I plan on doing this Saturday.
> >
> >
> > --
> > Travis
> > http://jeepadventures.dyndns.org/jeep.html
> > The meek shall inherit the earth. After I'm finished with it.
> > :wq!
>
>
#40
Guest
Posts: n/a
Re: Good use for scrap metal also
let me try that again!!
http://www.cantrell.com/scrap/shifter21.JPG
"cantrellm" <cantrelm@bellsouth.net> wrote in message
news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> Good job Travis,
>
> check out what I made from scrap at my place of work. We do all stainless
> steel and aluminum work here. this is a polished alum. shift **** I had
> them make out of scrap!!
>
> http://cantrell.com/scrap/shifter21.jpg
>
> Tom Reins
> 2000 TJ Sport
> Just paid off
>
>
> "travis" <travist34removethis@hotmail.com> wrote in message
> news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > They had a pile of "to be thrown away" metal where I work. They had
> > some brackets that are used to rack mount network equipment that was
> > made of some pretty substantial steel. I have two holes in the tub on
> > my CJ, so I measured them and...
> > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > Now I have patches for the holes that I can weld in. Check out how
> > thick they are:
> > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> >
> > After I get them welded in I'm going to scuff up the entire inside of
> > the tub, then wipe it down with acetone, then apply two layers of
> > "Herculiner" the whole shootin' match. I'll take pictures of the
> > progress. I plan on doing this Saturday.
> >
> >
> > --
> > Travis
> > http://jeepadventures.dyndns.org/jeep.html
> > The meek shall inherit the earth. After I'm finished with it.
> > :wq!
>
>
http://www.cantrell.com/scrap/shifter21.JPG
"cantrellm" <cantrelm@bellsouth.net> wrote in message
news:rDzlb.231$Lj6.193@bignews3.bellsouth.net...
> Good job Travis,
>
> check out what I made from scrap at my place of work. We do all stainless
> steel and aluminum work here. this is a polished alum. shift **** I had
> them make out of scrap!!
>
> http://cantrell.com/scrap/shifter21.jpg
>
> Tom Reins
> 2000 TJ Sport
> Just paid off
>
>
> "travis" <travist34removethis@hotmail.com> wrote in message
> news:usbdpvctmm7dl5iqefrcj728af8sf6h3e1@4ax.com...
> > They had a pile of "to be thrown away" metal where I work. They had
> > some brackets that are used to rack mount network equipment that was
> > made of some pretty substantial steel. I have two holes in the tub on
> > my CJ, so I measured them and...
> > http://jeepadventures.dyndns.org/jee...ner/patch1.jpg
> > Now I have patches for the holes that I can weld in. Check out how
> > thick they are:
> > http://jeepadventures.dyndns.org/jee...ner/patch2.jpg
> >
> > After I get them welded in I'm going to scuff up the entire inside of
> > the tub, then wipe it down with acetone, then apply two layers of
> > "Herculiner" the whole shootin' match. I'll take pictures of the
> > progress. I plan on doing this Saturday.
> >
> >
> > --
> > Travis
> > http://jeepadventures.dyndns.org/jeep.html
> > The meek shall inherit the earth. After I'm finished with it.
> > :wq!
>
>