Finished lift kit, now have drive shaft vibration

Reply Subscribe

Thread Tools

Search this Thread

02-12-2004, 10:47 PM

#61

Mike Romain

Guest

Posts: n/a

Re: Finished lift kit, now have drive shaft vibration

Man oh man....

One thing at a time eh....

Mike

William Oliveri wrote:
>
> I just spoke to the place I bought the kit and they told me the shims that
> are on the rear springs are designed to be used in conjuction with the
> transfer case drop kit, they create an angle that will expecting the
> transfer case drop kit, and that the transfer case drop kit is a critical
> piece of the kit. When this is installed it should take all vibration out
> or if there's any it will be very minimal.
>
> I'll know by tonight.
>
> Bill
>
> "Robert Bills" <rdbillsjr@aol.comxxxxxxxx> wrote in message
> news:20040212183440.16864.00000676@mb-m26.aol.com...
> > >If you already have a double cardan (CV) driveshaft, then you
> > >have broken the ball thingie in the center.
> >
> > I'm fairly certain that he has the stock drivelines and no CV joint.
> >
> >
> >
> > Robert Bills
> > KG6LMV
> > Orange County CA
> >
> > http://www.outdoorwire.com/4x4/jeep/...p-l/billsr.htm
> > http://www.RobertBills.com