Re: FINALLY! Got the MPI on!
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message news:moomesa-7A01D7.10470916062004@corp.supernews.com... > http://sprite.viptx.net/~moomesa/main.html green jeep. It's beautiful..! *sniffle* I am huge John Deere fan, I grew up on my Grandad's Farm in NJ, and all he had were John Deere tractors, lawn mowers, even a bicycle... Wow. I love it. -Muuurgh > > After more than two years of gathering dust, I was able to get back to > work on the Jeep Deere. I finished the fuel lines and MPI setup. I have > hit a minor snag however. The plastic "rail" wiring loom to the > injectors is supposed to mount to three bolts sticking up out of the > head. No problem, however, I have installed the Kilby compressor kit and > it uses the forward bolt up with a bracket and a nut. > > Any suggestions? > > I could just open up the plastic "rail" hole to fit over the nut. Ew. > > Next I have to get a muffler shop to make a bent pipe for my new cat. > conv. to avoid the tranny mount. > > Then onto figuring out how to get the clutch master cylinder to attach > to the fork. The cylinder doesn't line up with the fork on the NV4500 > and the fork has a hole in it. Is there supposed to be a spring on the > fork? > > Any suggestions? Pix? |
Re: FINALLY! Got the MPI on!
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message news:moomesa-7A01D7.10470916062004@corp.supernews.com... > http://sprite.viptx.net/~moomesa/main.html green jeep. It's beautiful..! *sniffle* I am huge John Deere fan, I grew up on my Grandad's Farm in NJ, and all he had were John Deere tractors, lawn mowers, even a bicycle... Wow. I love it. -Muuurgh > > After more than two years of gathering dust, I was able to get back to > work on the Jeep Deere. I finished the fuel lines and MPI setup. I have > hit a minor snag however. The plastic "rail" wiring loom to the > injectors is supposed to mount to three bolts sticking up out of the > head. No problem, however, I have installed the Kilby compressor kit and > it uses the forward bolt up with a bracket and a nut. > > Any suggestions? > > I could just open up the plastic "rail" hole to fit over the nut. Ew. > > Next I have to get a muffler shop to make a bent pipe for my new cat. > conv. to avoid the tranny mount. > > Then onto figuring out how to get the clutch master cylinder to attach > to the fork. The cylinder doesn't line up with the fork on the NV4500 > and the fork has a hole in it. Is there supposed to be a spring on the > fork? > > Any suggestions? Pix? |
Re: FINALLY! Got the MPI on!
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message news:moomesa-7A01D7.10470916062004@corp.supernews.com... > http://sprite.viptx.net/~moomesa/main.html green jeep. It's beautiful..! *sniffle* I am huge John Deere fan, I grew up on my Grandad's Farm in NJ, and all he had were John Deere tractors, lawn mowers, even a bicycle... Wow. I love it. -Muuurgh > > After more than two years of gathering dust, I was able to get back to > work on the Jeep Deere. I finished the fuel lines and MPI setup. I have > hit a minor snag however. The plastic "rail" wiring loom to the > injectors is supposed to mount to three bolts sticking up out of the > head. No problem, however, I have installed the Kilby compressor kit and > it uses the forward bolt up with a bracket and a nut. > > Any suggestions? > > I could just open up the plastic "rail" hole to fit over the nut. Ew. > > Next I have to get a muffler shop to make a bent pipe for my new cat. > conv. to avoid the tranny mount. > > Then onto figuring out how to get the clutch master cylinder to attach > to the fork. The cylinder doesn't line up with the fork on the NV4500 > and the fork has a hole in it. Is there supposed to be a spring on the > fork? > > Any suggestions? Pix? |
Re: FINALLY! Got the MPI on!
Me Too
I even own a 1980 John Deere Liquifire 440 Snowmobile Which I plan to restore some day......... It's one quick "little" sled Muuurgh wrote: > "Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message > news:moomesa-7A01D7.10470916062004@corp.supernews.com... > >>http://sprite.viptx.net/~moomesa/main.html green jeep. > > > It's beautiful..! *sniffle* I am huge John Deere fan, I grew up on my > Grandad's Farm in NJ, and all he had were John Deere tractors, lawn mowers, > even a bicycle... Wow. I love it. > > -Muuurgh > > >>After more than two years of gathering dust, I was able to get back to >>work on the Jeep Deere. I finished the fuel lines and MPI setup. I have >>hit a minor snag however. The plastic "rail" wiring loom to the >>injectors is supposed to mount to three bolts sticking up out of the >>head. No problem, however, I have installed the Kilby compressor kit and >>it uses the forward bolt up with a bracket and a nut. >> >>Any suggestions? >> >>I could just open up the plastic "rail" hole to fit over the nut. Ew. >> >>Next I have to get a muffler shop to make a bent pipe for my new cat. >>conv. to avoid the tranny mount. >> >>Then onto figuring out how to get the clutch master cylinder to attach >>to the fork. The cylinder doesn't line up with the fork on the NV4500 >>and the fork has a hole in it. Is there supposed to be a spring on the >>fork? >> >>Any suggestions? Pix? > > > |
Re: FINALLY! Got the MPI on!
Me Too
I even own a 1980 John Deere Liquifire 440 Snowmobile Which I plan to restore some day......... It's one quick "little" sled Muuurgh wrote: > "Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message > news:moomesa-7A01D7.10470916062004@corp.supernews.com... > >>http://sprite.viptx.net/~moomesa/main.html green jeep. > > > It's beautiful..! *sniffle* I am huge John Deere fan, I grew up on my > Grandad's Farm in NJ, and all he had were John Deere tractors, lawn mowers, > even a bicycle... Wow. I love it. > > -Muuurgh > > >>After more than two years of gathering dust, I was able to get back to >>work on the Jeep Deere. I finished the fuel lines and MPI setup. I have >>hit a minor snag however. The plastic "rail" wiring loom to the >>injectors is supposed to mount to three bolts sticking up out of the >>head. No problem, however, I have installed the Kilby compressor kit and >>it uses the forward bolt up with a bracket and a nut. >> >>Any suggestions? >> >>I could just open up the plastic "rail" hole to fit over the nut. Ew. >> >>Next I have to get a muffler shop to make a bent pipe for my new cat. >>conv. to avoid the tranny mount. >> >>Then onto figuring out how to get the clutch master cylinder to attach >>to the fork. The cylinder doesn't line up with the fork on the NV4500 >>and the fork has a hole in it. Is there supposed to be a spring on the >>fork? >> >>Any suggestions? Pix? > > > |
Re: FINALLY! Got the MPI on!
Me Too
I even own a 1980 John Deere Liquifire 440 Snowmobile Which I plan to restore some day......... It's one quick "little" sled Muuurgh wrote: > "Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message > news:moomesa-7A01D7.10470916062004@corp.supernews.com... > >>http://sprite.viptx.net/~moomesa/main.html green jeep. > > > It's beautiful..! *sniffle* I am huge John Deere fan, I grew up on my > Grandad's Farm in NJ, and all he had were John Deere tractors, lawn mowers, > even a bicycle... Wow. I love it. > > -Muuurgh > > >>After more than two years of gathering dust, I was able to get back to >>work on the Jeep Deere. I finished the fuel lines and MPI setup. I have >>hit a minor snag however. The plastic "rail" wiring loom to the >>injectors is supposed to mount to three bolts sticking up out of the >>head. No problem, however, I have installed the Kilby compressor kit and >>it uses the forward bolt up with a bracket and a nut. >> >>Any suggestions? >> >>I could just open up the plastic "rail" hole to fit over the nut. Ew. >> >>Next I have to get a muffler shop to make a bent pipe for my new cat. >>conv. to avoid the tranny mount. >> >>Then onto figuring out how to get the clutch master cylinder to attach >>to the fork. The cylinder doesn't line up with the fork on the NV4500 >>and the fork has a hole in it. Is there supposed to be a spring on the >>fork? >> >>Any suggestions? Pix? > > > |
Re: FINALLY! Got the MPI on!
Me Too
I even own a 1980 John Deere Liquifire 440 Snowmobile Which I plan to restore some day......... It's one quick "little" sled Muuurgh wrote: > "Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message > news:moomesa-7A01D7.10470916062004@corp.supernews.com... > >>http://sprite.viptx.net/~moomesa/main.html green jeep. > > > It's beautiful..! *sniffle* I am huge John Deere fan, I grew up on my > Grandad's Farm in NJ, and all he had were John Deere tractors, lawn mowers, > even a bicycle... Wow. I love it. > > -Muuurgh > > >>After more than two years of gathering dust, I was able to get back to >>work on the Jeep Deere. I finished the fuel lines and MPI setup. I have >>hit a minor snag however. The plastic "rail" wiring loom to the >>injectors is supposed to mount to three bolts sticking up out of the >>head. No problem, however, I have installed the Kilby compressor kit and >>it uses the forward bolt up with a bracket and a nut. >> >>Any suggestions? >> >>I could just open up the plastic "rail" hole to fit over the nut. Ew. >> >>Next I have to get a muffler shop to make a bent pipe for my new cat. >>conv. to avoid the tranny mount. >> >>Then onto figuring out how to get the clutch master cylinder to attach >>to the fork. The cylinder doesn't line up with the fork on the NV4500 >>and the fork has a hole in it. Is there supposed to be a spring on the >>fork? >> >>Any suggestions? Pix? > > > |
Re: FINALLY! Got the MPI on!
In article <7uqdne6rXfIiFU3dRVn-hw@magma.ca>,
FrankW <fworm@mxznorpak.ca> wrote: > Me Too > I even own a 1980 John Deere Liquifire 440 Snowmobile > Which I plan to restore some day......... > It's one quick "little" sled I have a 1967 John Deere 4020 LP Tractor for which was my inspiration. |
Re: FINALLY! Got the MPI on!
In article <7uqdne6rXfIiFU3dRVn-hw@magma.ca>,
FrankW <fworm@mxznorpak.ca> wrote: > Me Too > I even own a 1980 John Deere Liquifire 440 Snowmobile > Which I plan to restore some day......... > It's one quick "little" sled I have a 1967 John Deere 4020 LP Tractor for which was my inspiration. |
Re: FINALLY! Got the MPI on!
In article <7uqdne6rXfIiFU3dRVn-hw@magma.ca>,
FrankW <fworm@mxznorpak.ca> wrote: > Me Too > I even own a 1980 John Deere Liquifire 440 Snowmobile > Which I plan to restore some day......... > It's one quick "little" sled I have a 1967 John Deere 4020 LP Tractor for which was my inspiration. |
All times are GMT -4. The time now is 05:37 PM. |
© 2024 MH Sub I, LLC dba Internet Brands