FINALLY! Got the MPI on!
 

http://sprite.viptx.net/~moomesa/main.html green jeep.

After more than two years of gathering dust, I was able to get back to
work on the Jeep Deere. I finished the fuel lines and MPI setup. I have
hit a minor snag however. The plastic "rail" wiring loom to the
injectors is supposed to mount to three bolts sticking up out of the
head. No problem, however, I have installed the Kilby compressor kit and
it uses the forward bolt up with a bracket and a nut.

Any suggestions?

I could just open up the plastic "rail" hole to fit over the nut. Ew.

Next I have to get a muffler shop to make a bent pipe for my new cat.
conv. to avoid the tranny mount.

Then onto figuring out how to get the clutch master cylinder to attach
to the fork. The cylinder doesn't line up with the fork on the NV4500
and the fork has a hole in it. Is there supposed to be a spring on the
fork?

Any suggestions? Pix?

Re: FINALLY! Got the MPI on!
 

Nice GREEN color :-)

I just have mine laying there willy nilly. The wires pretty much keep it in
place.

Bill


"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-7A01D7.10470916062004@corp.supernews.com...
> http://sprite.viptx.net/~moomesa/main.html green jeep.
>
> After more than two years of gathering dust, I was able to get back to
> work on the Jeep Deere. I finished the fuel lines and MPI setup. I have
> hit a minor snag however. The plastic "rail" wiring loom to the
> injectors is supposed to mount to three bolts sticking up out of the
> head. No problem, however, I have installed the Kilby compressor kit and
> it uses the forward bolt up with a bracket and a nut.
>
> Any suggestions?
>
> I could just open up the plastic "rail" hole to fit over the nut. Ew.
>
> Next I have to get a muffler shop to make a bent pipe for my new cat.
> conv. to avoid the tranny mount.
>
> Then onto figuring out how to get the clutch master cylinder to attach
> to the fork. The cylinder doesn't line up with the fork on the NV4500
> and the fork has a hole in it. Is there supposed to be a spring on the
> fork?
>
> Any suggestions? Pix?

Re: FINALLY! Got the MPI on!
 

Nice GREEN color :-)

I just have mine laying there willy nilly. The wires pretty much keep it in
place.

Bill


"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-7A01D7.10470916062004@corp.supernews.com...
> http://sprite.viptx.net/~moomesa/main.html green jeep.
>
> After more than two years of gathering dust, I was able to get back to
> work on the Jeep Deere. I finished the fuel lines and MPI setup. I have
> hit a minor snag however. The plastic "rail" wiring loom to the
> injectors is supposed to mount to three bolts sticking up out of the
> head. No problem, however, I have installed the Kilby compressor kit and
> it uses the forward bolt up with a bracket and a nut.
>
> Any suggestions?
>
> I could just open up the plastic "rail" hole to fit over the nut. Ew.
>
> Next I have to get a muffler shop to make a bent pipe for my new cat.
> conv. to avoid the tranny mount.
>
> Then onto figuring out how to get the clutch master cylinder to attach
> to the fork. The cylinder doesn't line up with the fork on the NV4500
> and the fork has a hole in it. Is there supposed to be a spring on the
> fork?
>
> Any suggestions? Pix?

Re: FINALLY! Got the MPI on!
 

Nice GREEN color :-)

I just have mine laying there willy nilly. The wires pretty much keep it in
place.

Bill


"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-7A01D7.10470916062004@corp.supernews.com...
> http://sprite.viptx.net/~moomesa/main.html green jeep.
>
> After more than two years of gathering dust, I was able to get back to
> work on the Jeep Deere. I finished the fuel lines and MPI setup. I have
> hit a minor snag however. The plastic "rail" wiring loom to the
> injectors is supposed to mount to three bolts sticking up out of the
> head. No problem, however, I have installed the Kilby compressor kit and
> it uses the forward bolt up with a bracket and a nut.
>
> Any suggestions?
>
> I could just open up the plastic "rail" hole to fit over the nut. Ew.
>
> Next I have to get a muffler shop to make a bent pipe for my new cat.
> conv. to avoid the tranny mount.
>
> Then onto figuring out how to get the clutch master cylinder to attach
> to the fork. The cylinder doesn't line up with the fork on the NV4500
> and the fork has a hole in it. Is there supposed to be a spring on the
> fork?
>
> Any suggestions? Pix?

Re: FINALLY! Got the MPI on!
 

Nice GREEN color :-)

I just have mine laying there willy nilly. The wires pretty much keep it in
place.

Bill


"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-7A01D7.10470916062004@corp.supernews.com...
> http://sprite.viptx.net/~moomesa/main.html green jeep.
>
> After more than two years of gathering dust, I was able to get back to
> work on the Jeep Deere. I finished the fuel lines and MPI setup. I have
> hit a minor snag however. The plastic "rail" wiring loom to the
> injectors is supposed to mount to three bolts sticking up out of the
> head. No problem, however, I have installed the Kilby compressor kit and
> it uses the forward bolt up with a bracket and a nut.
>
> Any suggestions?
>
> I could just open up the plastic "rail" hole to fit over the nut. Ew.
>
> Next I have to get a muffler shop to make a bent pipe for my new cat.
> conv. to avoid the tranny mount.
>
> Then onto figuring out how to get the clutch master cylinder to attach
> to the fork. The cylinder doesn't line up with the fork on the NV4500
> and the fork has a hole in it. Is there supposed to be a spring on the
> fork?
>
> Any suggestions? Pix?

Re: FINALLY! Got the MPI on!
 

IT'S SOOOOOOOOOOOOOOOOOOOOOOOOO GREEN!!! Looks like it has been SLIMED ..
lol I like it :))

Snow...

"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-7A01D7.10470916062004@corp.supernews.com...
> http://sprite.viptx.net/~moomesa/main.html green jeep.
>
> After more than two years of gathering dust, I was able to get back to
> work on the Jeep Deere. I finished the fuel lines and MPI setup. I have
> hit a minor snag however. The plastic "rail" wiring loom to the
> injectors is supposed to mount to three bolts sticking up out of the
> head. No problem, however, I have installed the Kilby compressor kit and
> it uses the forward bolt up with a bracket and a nut.
>
> Any suggestions?
>
> I could just open up the plastic "rail" hole to fit over the nut. Ew.
>
> Next I have to get a muffler shop to make a bent pipe for my new cat.
> conv. to avoid the tranny mount.
>
> Then onto figuring out how to get the clutch master cylinder to attach
> to the fork. The cylinder doesn't line up with the fork on the NV4500
> and the fork has a hole in it. Is there supposed to be a spring on the
> fork?
>
> Any suggestions? Pix?

Re: FINALLY! Got the MPI on!
 

IT'S SOOOOOOOOOOOOOOOOOOOOOOOOO GREEN!!! Looks like it has been SLIMED ..
lol I like it :))

Snow...

"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-7A01D7.10470916062004@corp.supernews.com...
> http://sprite.viptx.net/~moomesa/main.html green jeep.
>
> After more than two years of gathering dust, I was able to get back to
> work on the Jeep Deere. I finished the fuel lines and MPI setup. I have
> hit a minor snag however. The plastic "rail" wiring loom to the
> injectors is supposed to mount to three bolts sticking up out of the
> head. No problem, however, I have installed the Kilby compressor kit and
> it uses the forward bolt up with a bracket and a nut.
>
> Any suggestions?
>
> I could just open up the plastic "rail" hole to fit over the nut. Ew.
>
> Next I have to get a muffler shop to make a bent pipe for my new cat.
> conv. to avoid the tranny mount.
>
> Then onto figuring out how to get the clutch master cylinder to attach
> to the fork. The cylinder doesn't line up with the fork on the NV4500
> and the fork has a hole in it. Is there supposed to be a spring on the
> fork?
>
> Any suggestions? Pix?

Re: FINALLY! Got the MPI on!
 

IT'S SOOOOOOOOOOOOOOOOOOOOOOOOO GREEN!!! Looks like it has been SLIMED ..
lol I like it :))

Snow...

"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-7A01D7.10470916062004@corp.supernews.com...
> http://sprite.viptx.net/~moomesa/main.html green jeep.
>
> After more than two years of gathering dust, I was able to get back to
> work on the Jeep Deere. I finished the fuel lines and MPI setup. I have
> hit a minor snag however. The plastic "rail" wiring loom to the
> injectors is supposed to mount to three bolts sticking up out of the
> head. No problem, however, I have installed the Kilby compressor kit and
> it uses the forward bolt up with a bracket and a nut.
>
> Any suggestions?
>
> I could just open up the plastic "rail" hole to fit over the nut. Ew.
>
> Next I have to get a muffler shop to make a bent pipe for my new cat.
> conv. to avoid the tranny mount.
>
> Then onto figuring out how to get the clutch master cylinder to attach
> to the fork. The cylinder doesn't line up with the fork on the NV4500
> and the fork has a hole in it. Is there supposed to be a spring on the
> fork?
>
> Any suggestions? Pix?

Re: FINALLY! Got the MPI on!
 

IT'S SOOOOOOOOOOOOOOOOOOOOOOOOO GREEN!!! Looks like it has been SLIMED ..
lol I like it :))

Snow...

"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-7A01D7.10470916062004@corp.supernews.com...
> http://sprite.viptx.net/~moomesa/main.html green jeep.
>
> After more than two years of gathering dust, I was able to get back to
> work on the Jeep Deere. I finished the fuel lines and MPI setup. I have
> hit a minor snag however. The plastic "rail" wiring loom to the
> injectors is supposed to mount to three bolts sticking up out of the
> head. No problem, however, I have installed the Kilby compressor kit and
> it uses the forward bolt up with a bracket and a nut.
>
> Any suggestions?
>
> I could just open up the plastic "rail" hole to fit over the nut. Ew.
>
> Next I have to get a muffler shop to make a bent pipe for my new cat.
> conv. to avoid the tranny mount.
>
> Then onto figuring out how to get the clutch master cylinder to attach
> to the fork. The cylinder doesn't line up with the fork on the NV4500
> and the fork has a hole in it. Is there supposed to be a spring on the
> fork?
>
> Any suggestions? Pix?

Re: FINALLY! Got the MPI on!
 

"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-7A01D7.10470916062004@corp.supernews.com...
> http://sprite.viptx.net/~moomesa/main.html green jeep.

It's beautiful..! *sniffle* I am huge John Deere fan, I grew up on my
Grandad's Farm in NJ, and all he had were John Deere tractors, lawn mowers,
even a bicycle... Wow. I love it.

-Muuurgh

>
> After more than two years of gathering dust, I was able to get back to
> work on the Jeep Deere. I finished the fuel lines and MPI setup. I have
> hit a minor snag however. The plastic "rail" wiring loom to the
> injectors is supposed to mount to three bolts sticking up out of the
> head. No problem, however, I have installed the Kilby compressor kit and
> it uses the forward bolt up with a bracket and a nut.
>
> Any suggestions?
>
> I could just open up the plastic "rail" hole to fit over the nut. Ew.
>
> Next I have to get a muffler shop to make a bent pipe for my new cat.
> conv. to avoid the tranny mount.
>
> Then onto figuring out how to get the clutch master cylinder to attach
> to the fork. The cylinder doesn't line up with the fork on the NV4500
> and the fork has a hole in it. Is there supposed to be a spring on the
> fork?
>
> Any suggestions? Pix?

Re: FINALLY! Got the MPI on!
 

"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-7A01D7.10470916062004@corp.supernews.com...
> http://sprite.viptx.net/~moomesa/main.html green jeep.

It's beautiful..! *sniffle* I am huge John Deere fan, I grew up on my
Grandad's Farm in NJ, and all he had were John Deere tractors, lawn mowers,
even a bicycle... Wow. I love it.

-Muuurgh

>
> After more than two years of gathering dust, I was able to get back to
> work on the Jeep Deere. I finished the fuel lines and MPI setup. I have
> hit a minor snag however. The plastic "rail" wiring loom to the
> injectors is supposed to mount to three bolts sticking up out of the
> head. No problem, however, I have installed the Kilby compressor kit and
> it uses the forward bolt up with a bracket and a nut.
>
> Any suggestions?
>
> I could just open up the plastic "rail" hole to fit over the nut. Ew.
>
> Next I have to get a muffler shop to make a bent pipe for my new cat.
> conv. to avoid the tranny mount.
>
> Then onto figuring out how to get the clutch master cylinder to attach
> to the fork. The cylinder doesn't line up with the fork on the NV4500
> and the fork has a hole in it. Is there supposed to be a spring on the
> fork?
>
> Any suggestions? Pix?

Re: FINALLY! Got the MPI on!
 

"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-7A01D7.10470916062004@corp.supernews.com...
> http://sprite.viptx.net/~moomesa/main.html green jeep.

It's beautiful..! *sniffle* I am huge John Deere fan, I grew up on my
Grandad's Farm in NJ, and all he had were John Deere tractors, lawn mowers,
even a bicycle... Wow. I love it.

-Muuurgh

>
> After more than two years of gathering dust, I was able to get back to
> work on the Jeep Deere. I finished the fuel lines and MPI setup. I have
> hit a minor snag however. The plastic "rail" wiring loom to the
> injectors is supposed to mount to three bolts sticking up out of the
> head. No problem, however, I have installed the Kilby compressor kit and
> it uses the forward bolt up with a bracket and a nut.
>
> Any suggestions?
>
> I could just open up the plastic "rail" hole to fit over the nut. Ew.
>
> Next I have to get a muffler shop to make a bent pipe for my new cat.
> conv. to avoid the tranny mount.
>
> Then onto figuring out how to get the clutch master cylinder to attach
> to the fork. The cylinder doesn't line up with the fork on the NV4500
> and the fork has a hole in it. Is there supposed to be a spring on the
> fork?
>
> Any suggestions? Pix?

Re: FINALLY! Got the MPI on!
 

"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-7A01D7.10470916062004@corp.supernews.com...
> http://sprite.viptx.net/~moomesa/main.html green jeep.

It's beautiful..! *sniffle* I am huge John Deere fan, I grew up on my
Grandad's Farm in NJ, and all he had were John Deere tractors, lawn mowers,
even a bicycle... Wow. I love it.

-Muuurgh

>
> After more than two years of gathering dust, I was able to get back to
> work on the Jeep Deere. I finished the fuel lines and MPI setup. I have
> hit a minor snag however. The plastic "rail" wiring loom to the
> injectors is supposed to mount to three bolts sticking up out of the
> head. No problem, however, I have installed the Kilby compressor kit and
> it uses the forward bolt up with a bracket and a nut.
>
> Any suggestions?
>
> I could just open up the plastic "rail" hole to fit over the nut. Ew.
>
> Next I have to get a muffler shop to make a bent pipe for my new cat.
> conv. to avoid the tranny mount.
>
> Then onto figuring out how to get the clutch master cylinder to attach
> to the fork. The cylinder doesn't line up with the fork on the NV4500
> and the fork has a hole in it. Is there supposed to be a spring on the
> fork?
>
> Any suggestions? Pix?

Re: FINALLY! Got the MPI on!
 

Me Too
I even own a 1980 John Deere Liquifire 440 Snowmobile
Which I plan to restore some day.........
It's one quick "little" sled

Muuurgh wrote:
> "Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
> news:moomesa-7A01D7.10470916062004@corp.supernews.com...
>
>>http://sprite.viptx.net/~moomesa/main.html green jeep.
>
>
> It's beautiful..! *sniffle* I am huge John Deere fan, I grew up on my
> Grandad's Farm in NJ, and all he had were John Deere tractors, lawn mowers,
> even a bicycle... Wow. I love it.
>
> -Muuurgh
>
>
>>After more than two years of gathering dust, I was able to get back to
>>work on the Jeep Deere. I finished the fuel lines and MPI setup. I have
>>hit a minor snag however. The plastic "rail" wiring loom to the
>>injectors is supposed to mount to three bolts sticking up out of the
>>head. No problem, however, I have installed the Kilby compressor kit and
>>it uses the forward bolt up with a bracket and a nut.
>>
>>Any suggestions?
>>
>>I could just open up the plastic "rail" hole to fit over the nut. Ew.
>>
>>Next I have to get a muffler shop to make a bent pipe for my new cat.
>>conv. to avoid the tranny mount.
>>
>>Then onto figuring out how to get the clutch master cylinder to attach
>>to the fork. The cylinder doesn't line up with the fork on the NV4500
>>and the fork has a hole in it. Is there supposed to be a spring on the
>>fork?
>>
>>Any suggestions? Pix?
>
>
>

Re: FINALLY! Got the MPI on!
 

Me Too
I even own a 1980 John Deere Liquifire 440 Snowmobile
Which I plan to restore some day.........
It's one quick "little" sled

Muuurgh wrote:
> "Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
> news:moomesa-7A01D7.10470916062004@corp.supernews.com...
>
>>http://sprite.viptx.net/~moomesa/main.html green jeep.
>
>
> It's beautiful..! *sniffle* I am huge John Deere fan, I grew up on my
> Grandad's Farm in NJ, and all he had were John Deere tractors, lawn mowers,
> even a bicycle... Wow. I love it.
>
> -Muuurgh
>
>
>>After more than two years of gathering dust, I was able to get back to
>>work on the Jeep Deere. I finished the fuel lines and MPI setup. I have
>>hit a minor snag however. The plastic "rail" wiring loom to the
>>injectors is supposed to mount to three bolts sticking up out of the
>>head. No problem, however, I have installed the Kilby compressor kit and
>>it uses the forward bolt up with a bracket and a nut.
>>
>>Any suggestions?
>>
>>I could just open up the plastic "rail" hole to fit over the nut. Ew.
>>
>>Next I have to get a muffler shop to make a bent pipe for my new cat.
>>conv. to avoid the tranny mount.
>>
>>Then onto figuring out how to get the clutch master cylinder to attach
>>to the fork. The cylinder doesn't line up with the fork on the NV4500
>>and the fork has a hole in it. Is there supposed to be a spring on the
>>fork?
>>
>>Any suggestions? Pix?
>
>
>

Re: FINALLY! Got the MPI on!
 

Me Too
I even own a 1980 John Deere Liquifire 440 Snowmobile
Which I plan to restore some day.........
It's one quick "little" sled

Muuurgh wrote:
> "Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
> news:moomesa-7A01D7.10470916062004@corp.supernews.com...
>
>>http://sprite.viptx.net/~moomesa/main.html green jeep.
>
>
> It's beautiful..! *sniffle* I am huge John Deere fan, I grew up on my
> Grandad's Farm in NJ, and all he had were John Deere tractors, lawn mowers,
> even a bicycle... Wow. I love it.
>
> -Muuurgh
>
>
>>After more than two years of gathering dust, I was able to get back to
>>work on the Jeep Deere. I finished the fuel lines and MPI setup. I have
>>hit a minor snag however. The plastic "rail" wiring loom to the
>>injectors is supposed to mount to three bolts sticking up out of the
>>head. No problem, however, I have installed the Kilby compressor kit and
>>it uses the forward bolt up with a bracket and a nut.
>>
>>Any suggestions?
>>
>>I could just open up the plastic "rail" hole to fit over the nut. Ew.
>>
>>Next I have to get a muffler shop to make a bent pipe for my new cat.
>>conv. to avoid the tranny mount.
>>
>>Then onto figuring out how to get the clutch master cylinder to attach
>>to the fork. The cylinder doesn't line up with the fork on the NV4500
>>and the fork has a hole in it. Is there supposed to be a spring on the
>>fork?
>>
>>Any suggestions? Pix?
>
>
>

Re: FINALLY! Got the MPI on!
 

Me Too
I even own a 1980 John Deere Liquifire 440 Snowmobile
Which I plan to restore some day.........
It's one quick "little" sled

Muuurgh wrote:
> "Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
> news:moomesa-7A01D7.10470916062004@corp.supernews.com...
>
>>http://sprite.viptx.net/~moomesa/main.html green jeep.
>
>
> It's beautiful..! *sniffle* I am huge John Deere fan, I grew up on my
> Grandad's Farm in NJ, and all he had were John Deere tractors, lawn mowers,
> even a bicycle... Wow. I love it.
>
> -Muuurgh
>
>
>>After more than two years of gathering dust, I was able to get back to
>>work on the Jeep Deere. I finished the fuel lines and MPI setup. I have
>>hit a minor snag however. The plastic "rail" wiring loom to the
>>injectors is supposed to mount to three bolts sticking up out of the
>>head. No problem, however, I have installed the Kilby compressor kit and
>>it uses the forward bolt up with a bracket and a nut.
>>
>>Any suggestions?
>>
>>I could just open up the plastic "rail" hole to fit over the nut. Ew.
>>
>>Next I have to get a muffler shop to make a bent pipe for my new cat.
>>conv. to avoid the tranny mount.
>>
>>Then onto figuring out how to get the clutch master cylinder to attach
>>to the fork. The cylinder doesn't line up with the fork on the NV4500
>>and the fork has a hole in it. Is there supposed to be a spring on the
>>fork?
>>
>>Any suggestions? Pix?
>
>
>

Re: FINALLY! Got the MPI on!
 

In article <7uqdne6rXfIiFU3dRVn-hw@magma.ca>,
FrankW <fworm@mxznorpak.ca> wrote:

> Me Too
> I even own a 1980 John Deere Liquifire 440 Snowmobile
> Which I plan to restore some day.........
> It's one quick "little" sled

I have a 1967 John Deere 4020 LP Tractor for which was my inspiration.

Re: FINALLY! Got the MPI on!
 

In article <7uqdne6rXfIiFU3dRVn-hw@magma.ca>,
FrankW <fworm@mxznorpak.ca> wrote:

> Me Too
> I even own a 1980 John Deere Liquifire 440 Snowmobile
> Which I plan to restore some day.........
> It's one quick "little" sled

I have a 1967 John Deere 4020 LP Tractor for which was my inspiration.

Re: FINALLY! Got the MPI on!
 

In article <7uqdne6rXfIiFU3dRVn-hw@magma.ca>,
FrankW <fworm@mxznorpak.ca> wrote:

> Me Too
> I even own a 1980 John Deere Liquifire 440 Snowmobile
> Which I plan to restore some day.........
> It's one quick "little" sled

I have a 1967 John Deere 4020 LP Tractor for which was my inspiration.

Re: FINALLY! Got the MPI on!
 

In article <7uqdne6rXfIiFU3dRVn-hw@magma.ca>,
FrankW <fworm@mxznorpak.ca> wrote:

> Me Too
> I even own a 1980 John Deere Liquifire 440 Snowmobile
> Which I plan to restore some day.........
> It's one quick "little" sled

I have a 1967 John Deere 4020 LP Tractor for which was my inspiration.

Re: FINALLY! Got the MPI on!
 

On Wed, 16 Jun 2004 13:52:27 -0400, FrankW <fworm@mxznorpak.ca> wrote:

>Me Too
>I even own a 1980 John Deere Liquifire 440 Snowmobile
>Which I plan to restore some day.........
>It's one quick "little" sled


....one of my good frineds in NY still has the JD helmets and
snowmobile suits that were purchased with the sled....we used to enjoy
going skiing proudly wearing the "trendy" John Deere suits....I'm sure
the rest of the slope poseurs were properly envious ;-)

,,,Gareth

Re: FINALLY! Got the MPI on!
 

On Wed, 16 Jun 2004 13:52:27 -0400, FrankW <fworm@mxznorpak.ca> wrote:

>Me Too
>I even own a 1980 John Deere Liquifire 440 Snowmobile
>Which I plan to restore some day.........
>It's one quick "little" sled


....one of my good frineds in NY still has the JD helmets and
snowmobile suits that were purchased with the sled....we used to enjoy
going skiing proudly wearing the "trendy" John Deere suits....I'm sure
the rest of the slope poseurs were properly envious ;-)

,,,Gareth

Re: FINALLY! Got the MPI on!
 

On Wed, 16 Jun 2004 13:52:27 -0400, FrankW <fworm@mxznorpak.ca> wrote:

>Me Too
>I even own a 1980 John Deere Liquifire 440 Snowmobile
>Which I plan to restore some day.........
>It's one quick "little" sled


....one of my good frineds in NY still has the JD helmets and
snowmobile suits that were purchased with the sled....we used to enjoy
going skiing proudly wearing the "trendy" John Deere suits....I'm sure
the rest of the slope poseurs were properly envious ;-)

,,,Gareth

Re: FINALLY! Got the MPI on!
 

On Wed, 16 Jun 2004 13:52:27 -0400, FrankW <fworm@mxznorpak.ca> wrote:

>Me Too
>I even own a 1980 John Deere Liquifire 440 Snowmobile
>Which I plan to restore some day.........
>It's one quick "little" sled


....one of my good frineds in NY still has the JD helmets and
snowmobile suits that were purchased with the sled....we used to enjoy
going skiing proudly wearing the "trendy" John Deere suits....I'm sure
the rest of the slope poseurs were properly envious ;-)

,,,Gareth

Re: FINALLY! Got the MPI on!
 

Like this?
http://ryan55349.tripod.com/sitebuil...ictures/77.jpg

Gary Tateosian wrote:

> On Wed, 16 Jun 2004 13:52:27 -0400, FrankW <fworm@mxznorpak.ca> wrote:
>
>
>>Me Too
>>I even own a 1980 John Deere Liquifire 440 Snowmobile
>>Which I plan to restore some day.........
>>It's one quick "little" sled
>
>
>
> ...one of my good frineds in NY still has the JD helmets and
> snowmobile suits that were purchased with the sled....we used to enjoy
> going skiing proudly wearing the "trendy" John Deere suits....I'm sure
> the rest of the slope poseurs were properly envious ;-)
>
> ,,,Gareth

Re: FINALLY! Got the MPI on!
 

Like this?
http://ryan55349.tripod.com/sitebuil...ictures/77.jpg

Gary Tateosian wrote:

> On Wed, 16 Jun 2004 13:52:27 -0400, FrankW <fworm@mxznorpak.ca> wrote:
>
>
>>Me Too
>>I even own a 1980 John Deere Liquifire 440 Snowmobile
>>Which I plan to restore some day.........
>>It's one quick "little" sled
>
>
>
> ...one of my good frineds in NY still has the JD helmets and
> snowmobile suits that were purchased with the sled....we used to enjoy
> going skiing proudly wearing the "trendy" John Deere suits....I'm sure
> the rest of the slope poseurs were properly envious ;-)
>
> ,,,Gareth

Re: FINALLY! Got the MPI on!
 

Like this?
http://ryan55349.tripod.com/sitebuil...ictures/77.jpg

Gary Tateosian wrote:

> On Wed, 16 Jun 2004 13:52:27 -0400, FrankW <fworm@mxznorpak.ca> wrote:
>
>
>>Me Too
>>I even own a 1980 John Deere Liquifire 440 Snowmobile
>>Which I plan to restore some day.........
>>It's one quick "little" sled
>
>
>
> ...one of my good frineds in NY still has the JD helmets and
> snowmobile suits that were purchased with the sled....we used to enjoy
> going skiing proudly wearing the "trendy" John Deere suits....I'm sure
> the rest of the slope poseurs were properly envious ;-)
>
> ,,,Gareth

Re: FINALLY! Got the MPI on!
 

Like this?
http://ryan55349.tripod.com/sitebuil...ictures/77.jpg

Gary Tateosian wrote:

> On Wed, 16 Jun 2004 13:52:27 -0400, FrankW <fworm@mxznorpak.ca> wrote:
>
>
>>Me Too
>>I even own a 1980 John Deere Liquifire 440 Snowmobile
>>Which I plan to restore some day.........
>>It's one quick "little" sled
>
>
>
> ...one of my good frineds in NY still has the JD helmets and
> snowmobile suits that were purchased with the sled....we used to enjoy
> going skiing proudly wearing the "trendy" John Deere suits....I'm sure
> the rest of the slope poseurs were properly envious ;-)
>
> ,,,Gareth

Re: FINALLY! Got the MPI on!
 

In article <YZqdnbIrZ55aD03d4p2dnA@magma.ca>,
FrankW <fworm@mxznorpak.ca> wrote:

> http://ryan55349.tripod.com/sitebuil...ictures/77.jpg

I'd look so cool wearing one of those in my Jeep!!

Re: FINALLY! Got the MPI on!
 

In article <YZqdnbIrZ55aD03d4p2dnA@magma.ca>,
FrankW <fworm@mxznorpak.ca> wrote:

> http://ryan55349.tripod.com/sitebuil...ictures/77.jpg

I'd look so cool wearing one of those in my Jeep!!

Re: FINALLY! Got the MPI on!
 

In article <YZqdnbIrZ55aD03d4p2dnA@magma.ca>,
FrankW <fworm@mxznorpak.ca> wrote:

> http://ryan55349.tripod.com/sitebuil...ictures/77.jpg

I'd look so cool wearing one of those in my Jeep!!

Re: FINALLY! Got the MPI on!
 

In article <YZqdnbIrZ55aD03d4p2dnA@magma.ca>,
FrankW <fworm@mxznorpak.ca> wrote:

> http://ryan55349.tripod.com/sitebuil...ictures/77.jpg

I'd look so cool wearing one of those in my Jeep!!

Re: FINALLY! Got the MPI on!
 

"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-79CA4D.13425916062004@corp.supernews.com...
: In article <YZqdnbIrZ55aD03d4p2dnA@magma.ca>,
: FrankW <fworm@mxznorpak.ca> wrote:
:
: >
http://ryan55349.tripod.com/sitebuil...ictures/77.jpg
:
: I'd look so cool wearing one of those in my Jeep!!

Yep, so cool!
Nice Jeep and I enjoyed browsing your website... btw, do you have any more
pictures of your wife's ass?

-Brian

Re: FINALLY! Got the MPI on!
 

"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-79CA4D.13425916062004@corp.supernews.com...
: In article <YZqdnbIrZ55aD03d4p2dnA@magma.ca>,
: FrankW <fworm@mxznorpak.ca> wrote:
:
: >
http://ryan55349.tripod.com/sitebuil...ictures/77.jpg
:
: I'd look so cool wearing one of those in my Jeep!!

Yep, so cool!
Nice Jeep and I enjoyed browsing your website... btw, do you have any more
pictures of your wife's ass?

-Brian

Re: FINALLY! Got the MPI on!
 

"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-79CA4D.13425916062004@corp.supernews.com...
: In article <YZqdnbIrZ55aD03d4p2dnA@magma.ca>,
: FrankW <fworm@mxznorpak.ca> wrote:
:
: >
http://ryan55349.tripod.com/sitebuil...ictures/77.jpg
:
: I'd look so cool wearing one of those in my Jeep!!

Yep, so cool!
Nice Jeep and I enjoyed browsing your website... btw, do you have any more
pictures of your wife's ass?

-Brian

Re: FINALLY! Got the MPI on!
 

"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-79CA4D.13425916062004@corp.supernews.com...
: In article <YZqdnbIrZ55aD03d4p2dnA@magma.ca>,
: FrankW <fworm@mxznorpak.ca> wrote:
:
: >
http://ryan55349.tripod.com/sitebuil...ictures/77.jpg
:
: I'd look so cool wearing one of those in my Jeep!!

Yep, so cool!
Nice Jeep and I enjoyed browsing your website... btw, do you have any more
pictures of your wife's ass?

-Brian

Re: FINALLY! Got the MPI on!
 

Yeah, nice ass. I could jump on that ass and ride it all day long. LOL.

Bill


"Cherokee-LTD" <spammenot@home.com> wrote in message news:fN0Ac.2017$7C%
> btw, do you have any more pictures of your wife's ass?
>
> -Brian
>
>

Re: FINALLY! Got the MPI on!
 

Yeah, nice ass. I could jump on that ass and ride it all day long. LOL.

Bill


"Cherokee-LTD" <spammenot@home.com> wrote in message news:fN0Ac.2017$7C%
> btw, do you have any more pictures of your wife's ass?
>
> -Brian
>
>

Re: FINALLY! Got the MPI on!
 

Yeah, nice ass. I could jump on that ass and ride it all day long. LOL.

Bill


"Cherokee-LTD" <spammenot@home.com> wrote in message news:fN0Ac.2017$7C%
> btw, do you have any more pictures of your wife's ass?
>
> -Brian
>
>