Down in the neighborhood south of the Spectrum. They are in the
light-industrial area between Moulton and the I-5, and between Lake Forest
and the El Toro Y. I only went there once, but it was easy enough to find.




"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bus9nt$lil38$1@ID-193866.news.uni-berlin.de...
> Where in Irvine? I couldn't find a listing.
>
>
> "CRWLR" <beerman@yahoo.com> wrote in message
> news:1013a22q8ap2k17@corp.supernews.com...
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:bursgl$jepg6$1@ID-193866.news.uni-berlin.de...
> > > Well, they did it to me again. After giving them the exact
measurments
> on
> > > my CJ U-Bolts they sent me another set of the exact same wrong size
that
> > > they originally sent me!!! I wasted a week waiting for these things
and
> > now
> > > I have to wait again. I'm extremely pissed to say the least.
> > >
> > > So I call Deaver Spring in Santa Ana as Robert Bills suggested and
they
> > > charge 60.00 for the set and the fellow there said the quality will be
> > > better than what I get with the kit. Can anyone tell me the
difference
> in
> > > quality between the two U-Bolts. Deaver said I would be getting about
a
> > > Grade 2 from the kit people and he would provide me with a Grade 5.
> > >
> > > Would the grade that I get from the Superlift kit ever bend or stretch
> > out?
> > > Has anyone ever had this happen to them?
> > >
> >
> >
> > I seriously doubt you are getting a Grade 2 ubolt for an automotive
> > application. If the ubolts fit the plate, then they are the right size.
I
> > got my springs from 4WheelParts Wholesalers, and the ubolts are the
right
> > size. And, they are in Irvine, not far from you.
> >
> >
> >
>
>

 

Down in the neighborhood south of the Spectrum. They are in the
light-industrial area between Moulton and the I-5, and between Lake Forest
and the El Toro Y. I only went there once, but it was easy enough to find.




"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bus9nt$lil38$1@ID-193866.news.uni-berlin.de...
> Where in Irvine? I couldn't find a listing.
>
>
> "CRWLR" <beerman@yahoo.com> wrote in message
> news:1013a22q8ap2k17@corp.supernews.com...
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:bursgl$jepg6$1@ID-193866.news.uni-berlin.de...
> > > Well, they did it to me again. After giving them the exact
measurments
> on
> > > my CJ U-Bolts they sent me another set of the exact same wrong size
that
> > > they originally sent me!!! I wasted a week waiting for these things
and
> > now
> > > I have to wait again. I'm extremely pissed to say the least.
> > >
> > > So I call Deaver Spring in Santa Ana as Robert Bills suggested and
they
> > > charge 60.00 for the set and the fellow there said the quality will be
> > > better than what I get with the kit. Can anyone tell me the
difference
> in
> > > quality between the two U-Bolts. Deaver said I would be getting about
a
> > > Grade 2 from the kit people and he would provide me with a Grade 5.
> > >
> > > Would the grade that I get from the Superlift kit ever bend or stretch
> > out?
> > > Has anyone ever had this happen to them?
> > >
> >
> >
> > I seriously doubt you are getting a Grade 2 ubolt for an automotive
> > application. If the ubolts fit the plate, then they are the right size.
I
> > got my springs from 4WheelParts Wholesalers, and the ubolts are the
right
> > size. And, they are in Irvine, not far from you.
> >
> >
> >
>
>

 

Down in the neighborhood south of the Spectrum. They are in the
light-industrial area between Moulton and the I-5, and between Lake Forest
and the El Toro Y. I only went there once, but it was easy enough to find.




"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bus9nt$lil38$1@ID-193866.news.uni-berlin.de...
> Where in Irvine? I couldn't find a listing.
>
>
> "CRWLR" <beerman@yahoo.com> wrote in message
> news:1013a22q8ap2k17@corp.supernews.com...
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:bursgl$jepg6$1@ID-193866.news.uni-berlin.de...
> > > Well, they did it to me again. After giving them the exact
measurments
> on
> > > my CJ U-Bolts they sent me another set of the exact same wrong size
that
> > > they originally sent me!!! I wasted a week waiting for these things
and
> > now
> > > I have to wait again. I'm extremely pissed to say the least.
> > >
> > > So I call Deaver Spring in Santa Ana as Robert Bills suggested and
they
> > > charge 60.00 for the set and the fellow there said the quality will be
> > > better than what I get with the kit. Can anyone tell me the
difference
> in
> > > quality between the two U-Bolts. Deaver said I would be getting about
a
> > > Grade 2 from the kit people and he would provide me with a Grade 5.
> > >
> > > Would the grade that I get from the Superlift kit ever bend or stretch
> > out?
> > > Has anyone ever had this happen to them?
> > >
> >
> >
> > I seriously doubt you are getting a Grade 2 ubolt for an automotive
> > application. If the ubolts fit the plate, then they are the right size.
I
> > got my springs from 4WheelParts Wholesalers, and the ubolts are the
right
> > size. And, they are in Irvine, not far from you.
> >
> >
> >
>
>