Dana 44 for a YJ?
#11
Guest
Posts: n/a
Re: Dana 44 for a YJ?
Have to agree with this. I might add though to have a professional welder
relocate the spring pads...
Earle
"TJim" <jim@ranlet.nospam.com> wrote in message
news:GmCdnZQ4PdVfkfKiU-KYvw@comcast.com...
> Try purchasing a relatively late model full size jeep and pulling the
axles
> off that. You will probably have to re-gear them and change the spring
pads
> around (Front is spring under, rear is spring under), but you'll save a
> bundle, even if you junk the rest of the vehicle.
>
> --
> Jim
> 98 TJ SE
> 90 SJ GW
> http://www.delawareja.com/gallery/JDJeep98
>
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:WOpbb.1010688$3C2.22542881@news3.calgary.shaw .ca...
> > I got prices from Dynatrac I think it was, $3,900.00 plus for front
and
> > $2,900.00 plus for rear, with tax and shipping you would be looking at 8
> > grand for both, more then most YJs are worth.
> >
> > "DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
> > news:20030921110219.08313.00001107@mb-m14.aol.com...
> > > Anyone know af an aftermarket manufacturer that builds Dana 44's front
&
> > rear
> > > for the YJ?
> >
> >
>
>
relocate the spring pads...
Earle
"TJim" <jim@ranlet.nospam.com> wrote in message
news:GmCdnZQ4PdVfkfKiU-KYvw@comcast.com...
> Try purchasing a relatively late model full size jeep and pulling the
axles
> off that. You will probably have to re-gear them and change the spring
pads
> around (Front is spring under, rear is spring under), but you'll save a
> bundle, even if you junk the rest of the vehicle.
>
> --
> Jim
> 98 TJ SE
> 90 SJ GW
> http://www.delawareja.com/gallery/JDJeep98
>
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:WOpbb.1010688$3C2.22542881@news3.calgary.shaw .ca...
> > I got prices from Dynatrac I think it was, $3,900.00 plus for front
and
> > $2,900.00 plus for rear, with tax and shipping you would be looking at 8
> > grand for both, more then most YJs are worth.
> >
> > "DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
> > news:20030921110219.08313.00001107@mb-m14.aol.com...
> > > Anyone know af an aftermarket manufacturer that builds Dana 44's front
&
> > rear
> > > for the YJ?
> >
> >
>
>
#12
Guest
Posts: n/a
Re: Dana 44 for a YJ?
A very good point.
Hey, then you can get a set of 60s and put them on the FSJ and keep it, too!
Cool!
--
Jim
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in message
news:bkn2sp$3htj9$1@ID-147790.news.uni-berlin.de...
> Have to agree with this. I might add though to have a professional welder
> relocate the spring pads...
>
> Earle
>
> "TJim" <jim@ranlet.nospam.com> wrote in message
> news:GmCdnZQ4PdVfkfKiU-KYvw@comcast.com...
> > Try purchasing a relatively late model full size jeep and pulling the
> axles
> > off that. You will probably have to re-gear them and change the spring
> pads
> > around (Front is spring under, rear is spring under), but you'll save a
> > bundle, even if you junk the rest of the vehicle.
> >
> > --
> > Jim
> > 98 TJ SE
> > 90 SJ GW
> > http://www.delawareja.com/gallery/JDJeep98
> >
> >
> > "Greg" <greglc84@hotmail.com> wrote in message
> > news:WOpbb.1010688$3C2.22542881@news3.calgary.shaw .ca...
> > > I got prices from Dynatrac I think it was, $3,900.00 plus for front
> and
> > > $2,900.00 plus for rear, with tax and shipping you would be looking at
8
> > > grand for both, more then most YJs are worth.
> > >
> > > "DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
> > > news:20030921110219.08313.00001107@mb-m14.aol.com...
> > > > Anyone know af an aftermarket manufacturer that builds Dana 44's
front
> &
> > > rear
> > > > for the YJ?
> > >
> > >
> >
> >
>
>
Hey, then you can get a set of 60s and put them on the FSJ and keep it, too!
Cool!
--
Jim
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in message
news:bkn2sp$3htj9$1@ID-147790.news.uni-berlin.de...
> Have to agree with this. I might add though to have a professional welder
> relocate the spring pads...
>
> Earle
>
> "TJim" <jim@ranlet.nospam.com> wrote in message
> news:GmCdnZQ4PdVfkfKiU-KYvw@comcast.com...
> > Try purchasing a relatively late model full size jeep and pulling the
> axles
> > off that. You will probably have to re-gear them and change the spring
> pads
> > around (Front is spring under, rear is spring under), but you'll save a
> > bundle, even if you junk the rest of the vehicle.
> >
> > --
> > Jim
> > 98 TJ SE
> > 90 SJ GW
> > http://www.delawareja.com/gallery/JDJeep98
> >
> >
> > "Greg" <greglc84@hotmail.com> wrote in message
> > news:WOpbb.1010688$3C2.22542881@news3.calgary.shaw .ca...
> > > I got prices from Dynatrac I think it was, $3,900.00 plus for front
> and
> > > $2,900.00 plus for rear, with tax and shipping you would be looking at
8
> > > grand for both, more then most YJs are worth.
> > >
> > > "DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
> > > news:20030921110219.08313.00001107@mb-m14.aol.com...
> > > > Anyone know af an aftermarket manufacturer that builds Dana 44's
front
> &
> > > rear
> > > > for the YJ?
> > >
> > >
> >
> >
>
>
#13
Guest
Posts: n/a
Re: Dana 44 for a YJ?
A very good point.
Hey, then you can get a set of 60s and put them on the FSJ and keep it, too!
Cool!
--
Jim
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in message
news:bkn2sp$3htj9$1@ID-147790.news.uni-berlin.de...
> Have to agree with this. I might add though to have a professional welder
> relocate the spring pads...
>
> Earle
>
> "TJim" <jim@ranlet.nospam.com> wrote in message
> news:GmCdnZQ4PdVfkfKiU-KYvw@comcast.com...
> > Try purchasing a relatively late model full size jeep and pulling the
> axles
> > off that. You will probably have to re-gear them and change the spring
> pads
> > around (Front is spring under, rear is spring under), but you'll save a
> > bundle, even if you junk the rest of the vehicle.
> >
> > --
> > Jim
> > 98 TJ SE
> > 90 SJ GW
> > http://www.delawareja.com/gallery/JDJeep98
> >
> >
> > "Greg" <greglc84@hotmail.com> wrote in message
> > news:WOpbb.1010688$3C2.22542881@news3.calgary.shaw .ca...
> > > I got prices from Dynatrac I think it was, $3,900.00 plus for front
> and
> > > $2,900.00 plus for rear, with tax and shipping you would be looking at
8
> > > grand for both, more then most YJs are worth.
> > >
> > > "DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
> > > news:20030921110219.08313.00001107@mb-m14.aol.com...
> > > > Anyone know af an aftermarket manufacturer that builds Dana 44's
front
> &
> > > rear
> > > > for the YJ?
> > >
> > >
> >
> >
>
>
Hey, then you can get a set of 60s and put them on the FSJ and keep it, too!
Cool!
--
Jim
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"Earle Horton" <enfermero_diabolico@registerednurses.com> wrote in message
news:bkn2sp$3htj9$1@ID-147790.news.uni-berlin.de...
> Have to agree with this. I might add though to have a professional welder
> relocate the spring pads...
>
> Earle
>
> "TJim" <jim@ranlet.nospam.com> wrote in message
> news:GmCdnZQ4PdVfkfKiU-KYvw@comcast.com...
> > Try purchasing a relatively late model full size jeep and pulling the
> axles
> > off that. You will probably have to re-gear them and change the spring
> pads
> > around (Front is spring under, rear is spring under), but you'll save a
> > bundle, even if you junk the rest of the vehicle.
> >
> > --
> > Jim
> > 98 TJ SE
> > 90 SJ GW
> > http://www.delawareja.com/gallery/JDJeep98
> >
> >
> > "Greg" <greglc84@hotmail.com> wrote in message
> > news:WOpbb.1010688$3C2.22542881@news3.calgary.shaw .ca...
> > > I got prices from Dynatrac I think it was, $3,900.00 plus for front
> and
> > > $2,900.00 plus for rear, with tax and shipping you would be looking at
8
> > > grand for both, more then most YJs are worth.
> > >
> > > "DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
> > > news:20030921110219.08313.00001107@mb-m14.aol.com...
> > > > Anyone know af an aftermarket manufacturer that builds Dana 44's
front
> &
> > > rear
> > > > for the YJ?
> > >
> > >
> >
> >
>
>
#14
Guest
Posts: n/a
Re: Dana 44 for a YJ?
I'd like to thank everyone for their feedback.
I was hoping to get away with under 3 grand but I see that I'll end up
scavenging and having the mounts re-welded to save wads of cash.
BTW, will the Dana 44's that come on the Rubi work on a YJ without too many
mods?
I was hoping to get away with under 3 grand but I see that I'll end up
scavenging and having the mounts re-welded to save wads of cash.
BTW, will the Dana 44's that come on the Rubi work on a YJ without too many
mods?
#15
Guest
Posts: n/a
Re: Dana 44 for a YJ?
I'd like to thank everyone for their feedback.
I was hoping to get away with under 3 grand but I see that I'll end up
scavenging and having the mounts re-welded to save wads of cash.
BTW, will the Dana 44's that come on the Rubi work on a YJ without too many
mods?
I was hoping to get away with under 3 grand but I see that I'll end up
scavenging and having the mounts re-welded to save wads of cash.
BTW, will the Dana 44's that come on the Rubi work on a YJ without too many
mods?
#16
Guest
Posts: n/a
Re: Dana 44 for a YJ?
Sure, it won't be too difficult to weld the perches on, and cut off
all that junk stuck on used to attached the TJ's flimsy coil springs.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DirtyBob3Feather wrote:
>
> I'd like to thank everyone for their feedback.
> I was hoping to get away with under 3 grand but I see that I'll end up
> scavenging and having the mounts re-welded to save wads of cash.
>
> BTW, will the Dana 44's that come on the Rubi work on a YJ without too many
> mods?
all that junk stuck on used to attached the TJ's flimsy coil springs.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DirtyBob3Feather wrote:
>
> I'd like to thank everyone for their feedback.
> I was hoping to get away with under 3 grand but I see that I'll end up
> scavenging and having the mounts re-welded to save wads of cash.
>
> BTW, will the Dana 44's that come on the Rubi work on a YJ without too many
> mods?
#17
Guest
Posts: n/a
Re: Dana 44 for a YJ?
Sure, it won't be too difficult to weld the perches on, and cut off
all that junk stuck on used to attached the TJ's flimsy coil springs.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DirtyBob3Feather wrote:
>
> I'd like to thank everyone for their feedback.
> I was hoping to get away with under 3 grand but I see that I'll end up
> scavenging and having the mounts re-welded to save wads of cash.
>
> BTW, will the Dana 44's that come on the Rubi work on a YJ without too many
> mods?
all that junk stuck on used to attached the TJ's flimsy coil springs.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
DirtyBob3Feather wrote:
>
> I'd like to thank everyone for their feedback.
> I was hoping to get away with under 3 grand but I see that I'll end up
> scavenging and having the mounts re-welded to save wads of cash.
>
> BTW, will the Dana 44's that come on the Rubi work on a YJ without too many
> mods?
#18
Guest
Posts: n/a
Re: Dana 44 for a YJ?
Haha, I was wondering when you were going to pipe in.
KH
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3F6FBCAF.6F2200A4@***.net...
> Sure, it won't be too difficult to weld the perches on, and cut off
> all that junk stuck on used to attached the TJ's flimsy coil springs.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DirtyBob3Feather wrote:
> >
> > I'd like to thank everyone for their feedback.
> > I was hoping to get away with under 3 grand but I see that I'll end up
> > scavenging and having the mounts re-welded to save wads of cash.
> >
> > BTW, will the Dana 44's that come on the Rubi work on a YJ without too
many
> > mods?
KH
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3F6FBCAF.6F2200A4@***.net...
> Sure, it won't be too difficult to weld the perches on, and cut off
> all that junk stuck on used to attached the TJ's flimsy coil springs.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DirtyBob3Feather wrote:
> >
> > I'd like to thank everyone for their feedback.
> > I was hoping to get away with under 3 grand but I see that I'll end up
> > scavenging and having the mounts re-welded to save wads of cash.
> >
> > BTW, will the Dana 44's that come on the Rubi work on a YJ without too
many
> > mods?
#19
Guest
Posts: n/a
Re: Dana 44 for a YJ?
Haha, I was wondering when you were going to pipe in.
KH
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3F6FBCAF.6F2200A4@***.net...
> Sure, it won't be too difficult to weld the perches on, and cut off
> all that junk stuck on used to attached the TJ's flimsy coil springs.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DirtyBob3Feather wrote:
> >
> > I'd like to thank everyone for their feedback.
> > I was hoping to get away with under 3 grand but I see that I'll end up
> > scavenging and having the mounts re-welded to save wads of cash.
> >
> > BTW, will the Dana 44's that come on the Rubi work on a YJ without too
many
> > mods?
KH
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3F6FBCAF.6F2200A4@***.net...
> Sure, it won't be too difficult to weld the perches on, and cut off
> all that junk stuck on used to attached the TJ's flimsy coil springs.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DirtyBob3Feather wrote:
> >
> > I'd like to thank everyone for their feedback.
> > I was hoping to get away with under 3 grand but I see that I'll end up
> > scavenging and having the mounts re-welded to save wads of cash.
> >
> > BTW, will the Dana 44's that come on the Rubi work on a YJ without too
many
> > mods?
#20
Guest
Posts: n/a
Re: Dana 44 for a YJ?
ROFLMAO!
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3F6FBCAF.6F2200A4@***.net...
> Sure, it won't be too difficult to weld the perches on, and cut off
> all that junk stuck on used to attached the TJ's flimsy coil springs.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DirtyBob3Feather wrote:
> >
> > I'd like to thank everyone for their feedback.
> > I was hoping to get away with under 3 grand but I see that I'll end up
> > scavenging and having the mounts re-welded to save wads of cash.
> >
> > BTW, will the Dana 44's that come on the Rubi work on a YJ without too
many
> > mods?
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3F6FBCAF.6F2200A4@***.net...
> Sure, it won't be too difficult to weld the perches on, and cut off
> all that junk stuck on used to attached the TJ's flimsy coil springs.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> DirtyBob3Feather wrote:
> >
> > I'd like to thank everyone for their feedback.
> > I was hoping to get away with under 3 grand but I see that I'll end up
> > scavenging and having the mounts re-welded to save wads of cash.
> >
> > BTW, will the Dana 44's that come on the Rubi work on a YJ without too
many
> > mods?