Dana 44 for a YJ?
#2
Guest
Posts: n/a
Re: Dana 44 for a YJ?
"DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
news:20030921110219.08313.00001107@mb-m14.aol.com...
> Anyone know af an aftermarket manufacturer that builds Dana 44's front &
rear
> for the YJ?
http://www.dynatrac.com
Earle
news:20030921110219.08313.00001107@mb-m14.aol.com...
> Anyone know af an aftermarket manufacturer that builds Dana 44's front &
rear
> for the YJ?
http://www.dynatrac.com
Earle
#3
Guest
Posts: n/a
Re: Dana 44 for a YJ?
"DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
news:20030921110219.08313.00001107@mb-m14.aol.com...
> Anyone know af an aftermarket manufacturer that builds Dana 44's front &
rear
> for the YJ?
http://www.dynatrac.com
Earle
news:20030921110219.08313.00001107@mb-m14.aol.com...
> Anyone know af an aftermarket manufacturer that builds Dana 44's front &
rear
> for the YJ?
http://www.dynatrac.com
Earle
#4
Guest
Posts: n/a
Re: Dana 44 for a YJ?
Dynatrac, Currie, Tri County Gear, Foothills Off Road.
"DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
news:20030921110219.08313.00001107@mb-m14.aol.com...
> Anyone know af an aftermarket manufacturer that builds Dana 44's front &
rear
> for the YJ?
"DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
news:20030921110219.08313.00001107@mb-m14.aol.com...
> Anyone know af an aftermarket manufacturer that builds Dana 44's front &
rear
> for the YJ?
#5
Guest
Posts: n/a
Re: Dana 44 for a YJ?
Dynatrac, Currie, Tri County Gear, Foothills Off Road.
"DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
news:20030921110219.08313.00001107@mb-m14.aol.com...
> Anyone know af an aftermarket manufacturer that builds Dana 44's front &
rear
> for the YJ?
"DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
news:20030921110219.08313.00001107@mb-m14.aol.com...
> Anyone know af an aftermarket manufacturer that builds Dana 44's front &
rear
> for the YJ?
#6
Guest
Posts: n/a
Re: Dana 44 for a YJ?
Gerald G. McGeorge wrote:
> Where the Jeep upgrade & axle swapping game is concerned, cost of component
> and value of vehicle are not related. If getting your money back is big
> concern of yours then DO NOT spend money upgrading your rig, you won't get
> it back when you sell it. This is about fun, not investing.
Agreed. I spent nearly nine grand on my Dynatracs, fully loaded, far
more than the 7500 I put into the used YJ. I'm not looking at what I
spent, I look at what I'm saving. Had I bought a new TJ for 20k, I'd
still want to upgrade it with beefy axles, higher clearance, and bigger
meats. We'd be talking another 12.5k, and this is a vehicle I am going
to put through the wringer.
Or, as a friend
> likes to say: "If you want to run with the big dogs, don't pee like a
> puppy!"
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:WOpbb.1010688$3C2.22542881@news3.calgary.shaw .ca...
>
>> I got prices from Dynatrac I think it was, $3,900.00 plus for front and
>>$2,900.00 plus for rear, with tax and shipping you would be looking at 8
>>grand for both, more then most YJs are worth.
>>
>>"DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
>>news:20030921110219.08313.00001107@mb-m14.aol.com...
>>
>>>Anyone know af an aftermarket manufacturer that builds Dana 44's front &
>>
>>rear
>>
>>>for the YJ?
>>
>>
>
>
> Where the Jeep upgrade & axle swapping game is concerned, cost of component
> and value of vehicle are not related. If getting your money back is big
> concern of yours then DO NOT spend money upgrading your rig, you won't get
> it back when you sell it. This is about fun, not investing.
Agreed. I spent nearly nine grand on my Dynatracs, fully loaded, far
more than the 7500 I put into the used YJ. I'm not looking at what I
spent, I look at what I'm saving. Had I bought a new TJ for 20k, I'd
still want to upgrade it with beefy axles, higher clearance, and bigger
meats. We'd be talking another 12.5k, and this is a vehicle I am going
to put through the wringer.
Or, as a friend
> likes to say: "If you want to run with the big dogs, don't pee like a
> puppy!"
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:WOpbb.1010688$3C2.22542881@news3.calgary.shaw .ca...
>
>> I got prices from Dynatrac I think it was, $3,900.00 plus for front and
>>$2,900.00 plus for rear, with tax and shipping you would be looking at 8
>>grand for both, more then most YJs are worth.
>>
>>"DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
>>news:20030921110219.08313.00001107@mb-m14.aol.com...
>>
>>>Anyone know af an aftermarket manufacturer that builds Dana 44's front &
>>
>>rear
>>
>>>for the YJ?
>>
>>
>
>
#7
Guest
Posts: n/a
Re: Dana 44 for a YJ?
Gerald G. McGeorge wrote:
> Where the Jeep upgrade & axle swapping game is concerned, cost of component
> and value of vehicle are not related. If getting your money back is big
> concern of yours then DO NOT spend money upgrading your rig, you won't get
> it back when you sell it. This is about fun, not investing.
Agreed. I spent nearly nine grand on my Dynatracs, fully loaded, far
more than the 7500 I put into the used YJ. I'm not looking at what I
spent, I look at what I'm saving. Had I bought a new TJ for 20k, I'd
still want to upgrade it with beefy axles, higher clearance, and bigger
meats. We'd be talking another 12.5k, and this is a vehicle I am going
to put through the wringer.
Or, as a friend
> likes to say: "If you want to run with the big dogs, don't pee like a
> puppy!"
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:WOpbb.1010688$3C2.22542881@news3.calgary.shaw .ca...
>
>> I got prices from Dynatrac I think it was, $3,900.00 plus for front and
>>$2,900.00 plus for rear, with tax and shipping you would be looking at 8
>>grand for both, more then most YJs are worth.
>>
>>"DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
>>news:20030921110219.08313.00001107@mb-m14.aol.com...
>>
>>>Anyone know af an aftermarket manufacturer that builds Dana 44's front &
>>
>>rear
>>
>>>for the YJ?
>>
>>
>
>
> Where the Jeep upgrade & axle swapping game is concerned, cost of component
> and value of vehicle are not related. If getting your money back is big
> concern of yours then DO NOT spend money upgrading your rig, you won't get
> it back when you sell it. This is about fun, not investing.
Agreed. I spent nearly nine grand on my Dynatracs, fully loaded, far
more than the 7500 I put into the used YJ. I'm not looking at what I
spent, I look at what I'm saving. Had I bought a new TJ for 20k, I'd
still want to upgrade it with beefy axles, higher clearance, and bigger
meats. We'd be talking another 12.5k, and this is a vehicle I am going
to put through the wringer.
Or, as a friend
> likes to say: "If you want to run with the big dogs, don't pee like a
> puppy!"
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:WOpbb.1010688$3C2.22542881@news3.calgary.shaw .ca...
>
>> I got prices from Dynatrac I think it was, $3,900.00 plus for front and
>>$2,900.00 plus for rear, with tax and shipping you would be looking at 8
>>grand for both, more then most YJs are worth.
>>
>>"DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
>>news:20030921110219.08313.00001107@mb-m14.aol.com...
>>
>>>Anyone know af an aftermarket manufacturer that builds Dana 44's front &
>>
>>rear
>>
>>>for the YJ?
>>
>>
>
>
#8
Guest
Posts: n/a
Re: Dana 44 for a YJ?
Try purchasing a relatively late model full size jeep and pulling the axles
off that. You will probably have to re-gear them and change the spring pads
around (Front is spring under, rear is spring under), but you'll save a
bundle, even if you junk the rest of the vehicle.
--
Jim
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"Greg" <greglc84@hotmail.com> wrote in message
news:WOpbb.1010688$3C2.22542881@news3.calgary.shaw .ca...
> I got prices from Dynatrac I think it was, $3,900.00 plus for front and
> $2,900.00 plus for rear, with tax and shipping you would be looking at 8
> grand for both, more then most YJs are worth.
>
> "DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
> news:20030921110219.08313.00001107@mb-m14.aol.com...
> > Anyone know af an aftermarket manufacturer that builds Dana 44's front &
> rear
> > for the YJ?
>
>
off that. You will probably have to re-gear them and change the spring pads
around (Front is spring under, rear is spring under), but you'll save a
bundle, even if you junk the rest of the vehicle.
--
Jim
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"Greg" <greglc84@hotmail.com> wrote in message
news:WOpbb.1010688$3C2.22542881@news3.calgary.shaw .ca...
> I got prices from Dynatrac I think it was, $3,900.00 plus for front and
> $2,900.00 plus for rear, with tax and shipping you would be looking at 8
> grand for both, more then most YJs are worth.
>
> "DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
> news:20030921110219.08313.00001107@mb-m14.aol.com...
> > Anyone know af an aftermarket manufacturer that builds Dana 44's front &
> rear
> > for the YJ?
>
>
#9
Guest
Posts: n/a
Re: Dana 44 for a YJ?
Try purchasing a relatively late model full size jeep and pulling the axles
off that. You will probably have to re-gear them and change the spring pads
around (Front is spring under, rear is spring under), but you'll save a
bundle, even if you junk the rest of the vehicle.
--
Jim
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"Greg" <greglc84@hotmail.com> wrote in message
news:WOpbb.1010688$3C2.22542881@news3.calgary.shaw .ca...
> I got prices from Dynatrac I think it was, $3,900.00 plus for front and
> $2,900.00 plus for rear, with tax and shipping you would be looking at 8
> grand for both, more then most YJs are worth.
>
> "DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
> news:20030921110219.08313.00001107@mb-m14.aol.com...
> > Anyone know af an aftermarket manufacturer that builds Dana 44's front &
> rear
> > for the YJ?
>
>
off that. You will probably have to re-gear them and change the spring pads
around (Front is spring under, rear is spring under), but you'll save a
bundle, even if you junk the rest of the vehicle.
--
Jim
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"Greg" <greglc84@hotmail.com> wrote in message
news:WOpbb.1010688$3C2.22542881@news3.calgary.shaw .ca...
> I got prices from Dynatrac I think it was, $3,900.00 plus for front and
> $2,900.00 plus for rear, with tax and shipping you would be looking at 8
> grand for both, more then most YJs are worth.
>
> "DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
> news:20030921110219.08313.00001107@mb-m14.aol.com...
> > Anyone know af an aftermarket manufacturer that builds Dana 44's front &
> rear
> > for the YJ?
>
>
#10
Guest
Posts: n/a
Re: Dana 44 for a YJ?
Have to agree with this. I might add though to have a professional welder
relocate the spring pads...
Earle
"TJim" <jim@ranlet.nospam.com> wrote in message
news:GmCdnZQ4PdVfkfKiU-KYvw@comcast.com...
> Try purchasing a relatively late model full size jeep and pulling the
axles
> off that. You will probably have to re-gear them and change the spring
pads
> around (Front is spring under, rear is spring under), but you'll save a
> bundle, even if you junk the rest of the vehicle.
>
> --
> Jim
> 98 TJ SE
> 90 SJ GW
> http://www.delawareja.com/gallery/JDJeep98
>
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:WOpbb.1010688$3C2.22542881@news3.calgary.shaw .ca...
> > I got prices from Dynatrac I think it was, $3,900.00 plus for front
and
> > $2,900.00 plus for rear, with tax and shipping you would be looking at 8
> > grand for both, more then most YJs are worth.
> >
> > "DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
> > news:20030921110219.08313.00001107@mb-m14.aol.com...
> > > Anyone know af an aftermarket manufacturer that builds Dana 44's front
&
> > rear
> > > for the YJ?
> >
> >
>
>
relocate the spring pads...
Earle
"TJim" <jim@ranlet.nospam.com> wrote in message
news:GmCdnZQ4PdVfkfKiU-KYvw@comcast.com...
> Try purchasing a relatively late model full size jeep and pulling the
axles
> off that. You will probably have to re-gear them and change the spring
pads
> around (Front is spring under, rear is spring under), but you'll save a
> bundle, even if you junk the rest of the vehicle.
>
> --
> Jim
> 98 TJ SE
> 90 SJ GW
> http://www.delawareja.com/gallery/JDJeep98
>
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:WOpbb.1010688$3C2.22542881@news3.calgary.shaw .ca...
> > I got prices from Dynatrac I think it was, $3,900.00 plus for front
and
> > $2,900.00 plus for rear, with tax and shipping you would be looking at 8
> > grand for both, more then most YJs are worth.
> >
> > "DirtyBob3Feather" <dirtybob3feather@aol.com> wrote in message
> > news:20030921110219.08313.00001107@mb-m14.aol.com...
> > > Anyone know af an aftermarket manufacturer that builds Dana 44's front
&
> > rear
> > > for the YJ?
> >
> >
>
>