clanking sound that driving me nuts.
#21
Guest
Posts: n/a
Re: clanking sound that driving me nuts.
lilgrasshopper@gmail.com wrote:
> Hi all,
>
> I have a 1995 Jeep Grand Cherokee from hell.
> I can drive on the highway all day and nothing bad will happen but
> once I get into stop and go traffic, like today, on a hot day, I
> would start to hear some clanking, then it would get louder, like
> something spinning and hitting something else. If I press on the gas
> pedal to go faster, the clanking sound would be faster, more frequent
> so I am thinking it has something to do with something spinning while
I hope I'm wrong, but that sounds like a bad rear mains bearing.
They usually make a bad clank/grind noise when the engine is under load
(like pulling a trailer) but eventually will make that noise even when
taking off.
Get yourself a big flat screwdriver or small pry bar. From under
the engine see how far the harmonic balancer will pry forward from the
engine and go back into the engine. It shouldn't move more than about
1/8" max. If it moves 1/4 like mine did way back when, then it's time
for a shortblock. Do not pry hard.. and pry against the inner ring on
the balancer. If it's going to move it will move easily.
--
DougW
> Hi all,
>
> I have a 1995 Jeep Grand Cherokee from hell.
> I can drive on the highway all day and nothing bad will happen but
> once I get into stop and go traffic, like today, on a hot day, I
> would start to hear some clanking, then it would get louder, like
> something spinning and hitting something else. If I press on the gas
> pedal to go faster, the clanking sound would be faster, more frequent
> so I am thinking it has something to do with something spinning while
I hope I'm wrong, but that sounds like a bad rear mains bearing.
They usually make a bad clank/grind noise when the engine is under load
(like pulling a trailer) but eventually will make that noise even when
taking off.
Get yourself a big flat screwdriver or small pry bar. From under
the engine see how far the harmonic balancer will pry forward from the
engine and go back into the engine. It shouldn't move more than about
1/8" max. If it moves 1/4 like mine did way back when, then it's time
for a shortblock. Do not pry hard.. and pry against the inner ring on
the balancer. If it's going to move it will move easily.
--
DougW
#22
Guest
Posts: n/a
Re: clanking sound that driving me nuts.
Hi Jeff:
I have not put it in Park and Rev the engine, worth a try. I know when
I put it in drive, it would start to make the noise, even when stopped.
Jeff DeWitt wrote:
> lilgrasshopper@gmail.com wrote:
> > Hi Earle:
> >
> > All I can think of is:
> >
> > 1. Hot day.
> > 2. If I put the gear in anything but Park, it makes that clanking
> > sound.
> > 3. Faster I go, the faster the clanking.
> > 4. This is in slow stop and go traffic.
> >
> > So, in term of the engine, what spins when it's in Park and what spins
> > when it's in Drive. ? because something made it stop clanking when I'm
> > in park.
> >
> > Guess I can take it back to the transmission people to have them take a
> > look.
> >
> > Thanks,
> >
> > -J.
> > Earle Horton wrote:
> >
> >>Could the exhaust be banging on something? I think that way because putting
> >>in Park takes the torque off the drive train, and lets everything settle
> >>into its natural alignment. Could the transmission people have left out a
> >>bolt or two? Or a bracket? Motor mounts loose?
> >>
> >>"Clanking" makes me think of the flex plate, but those usually don't come
> >>and go. Or a u-joint, but those are not usually temperature related.
> >>
> >>If you can get under the vehicle, check all over for loose stuff, leaking
> >>fluid (any kind) or obvious missing bolts.
> >>
> >>Earle
> >>
> >><lilgrasshopper@gmail.com> wrote in message
> >>news:1153710466.306465.198680@p79g2000cwp.google groups.com...
> >>
> >>>Hi all,
> >>>
> >>>I have a 1995 Jeep Grand Cherokee from hell.
> >>>
> >>>I recently had the transmisson rebuilt. (It was not engaging). I also
> >>>had the radiator replaced. Because the engine was reving and the
> >>>transmission was not engaging, it blew the radiator.
> >>>
> >>>Now:
> >>>
> >>>I can drive on the highway all day and nothing bad will happen but once
> >>>I get into stop and go traffic, like today, on a hot day, I would start
> >>>to hear some clanking, then it would get louder, like something
> >>>spinning and hitting something else. If I press on the gas pedal to go
> >>>faster, the clanking sound would be faster, more frequent so I am
> >>>thinking it has something to do with something spinning while I press
> >>>on the gas pedal (yeah, really car smart there, lol), if I put it Park,
> >>>the sound goes away but if I put it in drive to start driving, it would
> >>>make the clanking sound, hard to explain the sound, like a fan is
> >>>running and you stick a pencil into it...I think. Now, the thing is, if
> >>>I pull the car over, pop the hood, wait like 10 mins, snap the hood,
> >>>and start driving, the sound is gone. When I popped the hood, the
> >>>engine was really hot but like I said, today was like 90 outside. So to
> >>>sum up..
> >>>
> >>>1. Drive on highway -- Fine.
> >>>2. Stop and go traffic on hot day --- start to hear clicking sound
> >>>follows by clanking sound.
> >>>3. Put car in Park the sound goes away.
> >>>4. Pop the hood, let the engine cool for a few minutes, the sound goes
> >>>away.
> >>>5. Recently had the Tranmission rebuilt, radiator replaced.
> >>>
> >>>
> >>>The thing is, it is hard to troubleshoot, if I take it to the repair
> >>>shop, I would have to have it making the sound but when it happens, I'm
> >>>afraid to keep on driving so I'd pull over and pop the hood to let it
> >>>cool now. I don't want to ruin whatever that is making that clanking
> >>>sound.
> >>>Also, the car has a strong hum sound, like ummmmmmmmmmm sound, could be
> >>>from the exhaust system, not sure if it's related.
> >>>
> >>>Any suggestion help , idea is really apreciated.
> >>>
> >>>-J.
> >>>
> >
> >
> Does it make the noise just when you are moving or if you put it in Park
> and rev the engine a bit will you hear it then too?
>
> Jeff DeWitt
I have not put it in Park and Rev the engine, worth a try. I know when
I put it in drive, it would start to make the noise, even when stopped.
Jeff DeWitt wrote:
> lilgrasshopper@gmail.com wrote:
> > Hi Earle:
> >
> > All I can think of is:
> >
> > 1. Hot day.
> > 2. If I put the gear in anything but Park, it makes that clanking
> > sound.
> > 3. Faster I go, the faster the clanking.
> > 4. This is in slow stop and go traffic.
> >
> > So, in term of the engine, what spins when it's in Park and what spins
> > when it's in Drive. ? because something made it stop clanking when I'm
> > in park.
> >
> > Guess I can take it back to the transmission people to have them take a
> > look.
> >
> > Thanks,
> >
> > -J.
> > Earle Horton wrote:
> >
> >>Could the exhaust be banging on something? I think that way because putting
> >>in Park takes the torque off the drive train, and lets everything settle
> >>into its natural alignment. Could the transmission people have left out a
> >>bolt or two? Or a bracket? Motor mounts loose?
> >>
> >>"Clanking" makes me think of the flex plate, but those usually don't come
> >>and go. Or a u-joint, but those are not usually temperature related.
> >>
> >>If you can get under the vehicle, check all over for loose stuff, leaking
> >>fluid (any kind) or obvious missing bolts.
> >>
> >>Earle
> >>
> >><lilgrasshopper@gmail.com> wrote in message
> >>news:1153710466.306465.198680@p79g2000cwp.google groups.com...
> >>
> >>>Hi all,
> >>>
> >>>I have a 1995 Jeep Grand Cherokee from hell.
> >>>
> >>>I recently had the transmisson rebuilt. (It was not engaging). I also
> >>>had the radiator replaced. Because the engine was reving and the
> >>>transmission was not engaging, it blew the radiator.
> >>>
> >>>Now:
> >>>
> >>>I can drive on the highway all day and nothing bad will happen but once
> >>>I get into stop and go traffic, like today, on a hot day, I would start
> >>>to hear some clanking, then it would get louder, like something
> >>>spinning and hitting something else. If I press on the gas pedal to go
> >>>faster, the clanking sound would be faster, more frequent so I am
> >>>thinking it has something to do with something spinning while I press
> >>>on the gas pedal (yeah, really car smart there, lol), if I put it Park,
> >>>the sound goes away but if I put it in drive to start driving, it would
> >>>make the clanking sound, hard to explain the sound, like a fan is
> >>>running and you stick a pencil into it...I think. Now, the thing is, if
> >>>I pull the car over, pop the hood, wait like 10 mins, snap the hood,
> >>>and start driving, the sound is gone. When I popped the hood, the
> >>>engine was really hot but like I said, today was like 90 outside. So to
> >>>sum up..
> >>>
> >>>1. Drive on highway -- Fine.
> >>>2. Stop and go traffic on hot day --- start to hear clicking sound
> >>>follows by clanking sound.
> >>>3. Put car in Park the sound goes away.
> >>>4. Pop the hood, let the engine cool for a few minutes, the sound goes
> >>>away.
> >>>5. Recently had the Tranmission rebuilt, radiator replaced.
> >>>
> >>>
> >>>The thing is, it is hard to troubleshoot, if I take it to the repair
> >>>shop, I would have to have it making the sound but when it happens, I'm
> >>>afraid to keep on driving so I'd pull over and pop the hood to let it
> >>>cool now. I don't want to ruin whatever that is making that clanking
> >>>sound.
> >>>Also, the car has a strong hum sound, like ummmmmmmmmmm sound, could be
> >>>from the exhaust system, not sure if it's related.
> >>>
> >>>Any suggestion help , idea is really apreciated.
> >>>
> >>>-J.
> >>>
> >
> >
> Does it make the noise just when you are moving or if you put it in Park
> and rev the engine a bit will you hear it then too?
>
> Jeff DeWitt
#23
Guest
Posts: n/a
Re: clanking sound that driving me nuts.
Hi Jeff:
I have not put it in Park and Rev the engine, worth a try. I know when
I put it in drive, it would start to make the noise, even when stopped.
Jeff DeWitt wrote:
> lilgrasshopper@gmail.com wrote:
> > Hi Earle:
> >
> > All I can think of is:
> >
> > 1. Hot day.
> > 2. If I put the gear in anything but Park, it makes that clanking
> > sound.
> > 3. Faster I go, the faster the clanking.
> > 4. This is in slow stop and go traffic.
> >
> > So, in term of the engine, what spins when it's in Park and what spins
> > when it's in Drive. ? because something made it stop clanking when I'm
> > in park.
> >
> > Guess I can take it back to the transmission people to have them take a
> > look.
> >
> > Thanks,
> >
> > -J.
> > Earle Horton wrote:
> >
> >>Could the exhaust be banging on something? I think that way because putting
> >>in Park takes the torque off the drive train, and lets everything settle
> >>into its natural alignment. Could the transmission people have left out a
> >>bolt or two? Or a bracket? Motor mounts loose?
> >>
> >>"Clanking" makes me think of the flex plate, but those usually don't come
> >>and go. Or a u-joint, but those are not usually temperature related.
> >>
> >>If you can get under the vehicle, check all over for loose stuff, leaking
> >>fluid (any kind) or obvious missing bolts.
> >>
> >>Earle
> >>
> >><lilgrasshopper@gmail.com> wrote in message
> >>news:1153710466.306465.198680@p79g2000cwp.google groups.com...
> >>
> >>>Hi all,
> >>>
> >>>I have a 1995 Jeep Grand Cherokee from hell.
> >>>
> >>>I recently had the transmisson rebuilt. (It was not engaging). I also
> >>>had the radiator replaced. Because the engine was reving and the
> >>>transmission was not engaging, it blew the radiator.
> >>>
> >>>Now:
> >>>
> >>>I can drive on the highway all day and nothing bad will happen but once
> >>>I get into stop and go traffic, like today, on a hot day, I would start
> >>>to hear some clanking, then it would get louder, like something
> >>>spinning and hitting something else. If I press on the gas pedal to go
> >>>faster, the clanking sound would be faster, more frequent so I am
> >>>thinking it has something to do with something spinning while I press
> >>>on the gas pedal (yeah, really car smart there, lol), if I put it Park,
> >>>the sound goes away but if I put it in drive to start driving, it would
> >>>make the clanking sound, hard to explain the sound, like a fan is
> >>>running and you stick a pencil into it...I think. Now, the thing is, if
> >>>I pull the car over, pop the hood, wait like 10 mins, snap the hood,
> >>>and start driving, the sound is gone. When I popped the hood, the
> >>>engine was really hot but like I said, today was like 90 outside. So to
> >>>sum up..
> >>>
> >>>1. Drive on highway -- Fine.
> >>>2. Stop and go traffic on hot day --- start to hear clicking sound
> >>>follows by clanking sound.
> >>>3. Put car in Park the sound goes away.
> >>>4. Pop the hood, let the engine cool for a few minutes, the sound goes
> >>>away.
> >>>5. Recently had the Tranmission rebuilt, radiator replaced.
> >>>
> >>>
> >>>The thing is, it is hard to troubleshoot, if I take it to the repair
> >>>shop, I would have to have it making the sound but when it happens, I'm
> >>>afraid to keep on driving so I'd pull over and pop the hood to let it
> >>>cool now. I don't want to ruin whatever that is making that clanking
> >>>sound.
> >>>Also, the car has a strong hum sound, like ummmmmmmmmmm sound, could be
> >>>from the exhaust system, not sure if it's related.
> >>>
> >>>Any suggestion help , idea is really apreciated.
> >>>
> >>>-J.
> >>>
> >
> >
> Does it make the noise just when you are moving or if you put it in Park
> and rev the engine a bit will you hear it then too?
>
> Jeff DeWitt
I have not put it in Park and Rev the engine, worth a try. I know when
I put it in drive, it would start to make the noise, even when stopped.
Jeff DeWitt wrote:
> lilgrasshopper@gmail.com wrote:
> > Hi Earle:
> >
> > All I can think of is:
> >
> > 1. Hot day.
> > 2. If I put the gear in anything but Park, it makes that clanking
> > sound.
> > 3. Faster I go, the faster the clanking.
> > 4. This is in slow stop and go traffic.
> >
> > So, in term of the engine, what spins when it's in Park and what spins
> > when it's in Drive. ? because something made it stop clanking when I'm
> > in park.
> >
> > Guess I can take it back to the transmission people to have them take a
> > look.
> >
> > Thanks,
> >
> > -J.
> > Earle Horton wrote:
> >
> >>Could the exhaust be banging on something? I think that way because putting
> >>in Park takes the torque off the drive train, and lets everything settle
> >>into its natural alignment. Could the transmission people have left out a
> >>bolt or two? Or a bracket? Motor mounts loose?
> >>
> >>"Clanking" makes me think of the flex plate, but those usually don't come
> >>and go. Or a u-joint, but those are not usually temperature related.
> >>
> >>If you can get under the vehicle, check all over for loose stuff, leaking
> >>fluid (any kind) or obvious missing bolts.
> >>
> >>Earle
> >>
> >><lilgrasshopper@gmail.com> wrote in message
> >>news:1153710466.306465.198680@p79g2000cwp.google groups.com...
> >>
> >>>Hi all,
> >>>
> >>>I have a 1995 Jeep Grand Cherokee from hell.
> >>>
> >>>I recently had the transmisson rebuilt. (It was not engaging). I also
> >>>had the radiator replaced. Because the engine was reving and the
> >>>transmission was not engaging, it blew the radiator.
> >>>
> >>>Now:
> >>>
> >>>I can drive on the highway all day and nothing bad will happen but once
> >>>I get into stop and go traffic, like today, on a hot day, I would start
> >>>to hear some clanking, then it would get louder, like something
> >>>spinning and hitting something else. If I press on the gas pedal to go
> >>>faster, the clanking sound would be faster, more frequent so I am
> >>>thinking it has something to do with something spinning while I press
> >>>on the gas pedal (yeah, really car smart there, lol), if I put it Park,
> >>>the sound goes away but if I put it in drive to start driving, it would
> >>>make the clanking sound, hard to explain the sound, like a fan is
> >>>running and you stick a pencil into it...I think. Now, the thing is, if
> >>>I pull the car over, pop the hood, wait like 10 mins, snap the hood,
> >>>and start driving, the sound is gone. When I popped the hood, the
> >>>engine was really hot but like I said, today was like 90 outside. So to
> >>>sum up..
> >>>
> >>>1. Drive on highway -- Fine.
> >>>2. Stop and go traffic on hot day --- start to hear clicking sound
> >>>follows by clanking sound.
> >>>3. Put car in Park the sound goes away.
> >>>4. Pop the hood, let the engine cool for a few minutes, the sound goes
> >>>away.
> >>>5. Recently had the Tranmission rebuilt, radiator replaced.
> >>>
> >>>
> >>>The thing is, it is hard to troubleshoot, if I take it to the repair
> >>>shop, I would have to have it making the sound but when it happens, I'm
> >>>afraid to keep on driving so I'd pull over and pop the hood to let it
> >>>cool now. I don't want to ruin whatever that is making that clanking
> >>>sound.
> >>>Also, the car has a strong hum sound, like ummmmmmmmmmm sound, could be
> >>>from the exhaust system, not sure if it's related.
> >>>
> >>>Any suggestion help , idea is really apreciated.
> >>>
> >>>-J.
> >>>
> >
> >
> Does it make the noise just when you are moving or if you put it in Park
> and rev the engine a bit will you hear it then too?
>
> Jeff DeWitt
#24
Guest
Posts: n/a
Re: clanking sound that driving me nuts.
Hi Jeff:
I have not put it in Park and Rev the engine, worth a try. I know when
I put it in drive, it would start to make the noise, even when stopped.
Jeff DeWitt wrote:
> lilgrasshopper@gmail.com wrote:
> > Hi Earle:
> >
> > All I can think of is:
> >
> > 1. Hot day.
> > 2. If I put the gear in anything but Park, it makes that clanking
> > sound.
> > 3. Faster I go, the faster the clanking.
> > 4. This is in slow stop and go traffic.
> >
> > So, in term of the engine, what spins when it's in Park and what spins
> > when it's in Drive. ? because something made it stop clanking when I'm
> > in park.
> >
> > Guess I can take it back to the transmission people to have them take a
> > look.
> >
> > Thanks,
> >
> > -J.
> > Earle Horton wrote:
> >
> >>Could the exhaust be banging on something? I think that way because putting
> >>in Park takes the torque off the drive train, and lets everything settle
> >>into its natural alignment. Could the transmission people have left out a
> >>bolt or two? Or a bracket? Motor mounts loose?
> >>
> >>"Clanking" makes me think of the flex plate, but those usually don't come
> >>and go. Or a u-joint, but those are not usually temperature related.
> >>
> >>If you can get under the vehicle, check all over for loose stuff, leaking
> >>fluid (any kind) or obvious missing bolts.
> >>
> >>Earle
> >>
> >><lilgrasshopper@gmail.com> wrote in message
> >>news:1153710466.306465.198680@p79g2000cwp.google groups.com...
> >>
> >>>Hi all,
> >>>
> >>>I have a 1995 Jeep Grand Cherokee from hell.
> >>>
> >>>I recently had the transmisson rebuilt. (It was not engaging). I also
> >>>had the radiator replaced. Because the engine was reving and the
> >>>transmission was not engaging, it blew the radiator.
> >>>
> >>>Now:
> >>>
> >>>I can drive on the highway all day and nothing bad will happen but once
> >>>I get into stop and go traffic, like today, on a hot day, I would start
> >>>to hear some clanking, then it would get louder, like something
> >>>spinning and hitting something else. If I press on the gas pedal to go
> >>>faster, the clanking sound would be faster, more frequent so I am
> >>>thinking it has something to do with something spinning while I press
> >>>on the gas pedal (yeah, really car smart there, lol), if I put it Park,
> >>>the sound goes away but if I put it in drive to start driving, it would
> >>>make the clanking sound, hard to explain the sound, like a fan is
> >>>running and you stick a pencil into it...I think. Now, the thing is, if
> >>>I pull the car over, pop the hood, wait like 10 mins, snap the hood,
> >>>and start driving, the sound is gone. When I popped the hood, the
> >>>engine was really hot but like I said, today was like 90 outside. So to
> >>>sum up..
> >>>
> >>>1. Drive on highway -- Fine.
> >>>2. Stop and go traffic on hot day --- start to hear clicking sound
> >>>follows by clanking sound.
> >>>3. Put car in Park the sound goes away.
> >>>4. Pop the hood, let the engine cool for a few minutes, the sound goes
> >>>away.
> >>>5. Recently had the Tranmission rebuilt, radiator replaced.
> >>>
> >>>
> >>>The thing is, it is hard to troubleshoot, if I take it to the repair
> >>>shop, I would have to have it making the sound but when it happens, I'm
> >>>afraid to keep on driving so I'd pull over and pop the hood to let it
> >>>cool now. I don't want to ruin whatever that is making that clanking
> >>>sound.
> >>>Also, the car has a strong hum sound, like ummmmmmmmmmm sound, could be
> >>>from the exhaust system, not sure if it's related.
> >>>
> >>>Any suggestion help , idea is really apreciated.
> >>>
> >>>-J.
> >>>
> >
> >
> Does it make the noise just when you are moving or if you put it in Park
> and rev the engine a bit will you hear it then too?
>
> Jeff DeWitt
I have not put it in Park and Rev the engine, worth a try. I know when
I put it in drive, it would start to make the noise, even when stopped.
Jeff DeWitt wrote:
> lilgrasshopper@gmail.com wrote:
> > Hi Earle:
> >
> > All I can think of is:
> >
> > 1. Hot day.
> > 2. If I put the gear in anything but Park, it makes that clanking
> > sound.
> > 3. Faster I go, the faster the clanking.
> > 4. This is in slow stop and go traffic.
> >
> > So, in term of the engine, what spins when it's in Park and what spins
> > when it's in Drive. ? because something made it stop clanking when I'm
> > in park.
> >
> > Guess I can take it back to the transmission people to have them take a
> > look.
> >
> > Thanks,
> >
> > -J.
> > Earle Horton wrote:
> >
> >>Could the exhaust be banging on something? I think that way because putting
> >>in Park takes the torque off the drive train, and lets everything settle
> >>into its natural alignment. Could the transmission people have left out a
> >>bolt or two? Or a bracket? Motor mounts loose?
> >>
> >>"Clanking" makes me think of the flex plate, but those usually don't come
> >>and go. Or a u-joint, but those are not usually temperature related.
> >>
> >>If you can get under the vehicle, check all over for loose stuff, leaking
> >>fluid (any kind) or obvious missing bolts.
> >>
> >>Earle
> >>
> >><lilgrasshopper@gmail.com> wrote in message
> >>news:1153710466.306465.198680@p79g2000cwp.google groups.com...
> >>
> >>>Hi all,
> >>>
> >>>I have a 1995 Jeep Grand Cherokee from hell.
> >>>
> >>>I recently had the transmisson rebuilt. (It was not engaging). I also
> >>>had the radiator replaced. Because the engine was reving and the
> >>>transmission was not engaging, it blew the radiator.
> >>>
> >>>Now:
> >>>
> >>>I can drive on the highway all day and nothing bad will happen but once
> >>>I get into stop and go traffic, like today, on a hot day, I would start
> >>>to hear some clanking, then it would get louder, like something
> >>>spinning and hitting something else. If I press on the gas pedal to go
> >>>faster, the clanking sound would be faster, more frequent so I am
> >>>thinking it has something to do with something spinning while I press
> >>>on the gas pedal (yeah, really car smart there, lol), if I put it Park,
> >>>the sound goes away but if I put it in drive to start driving, it would
> >>>make the clanking sound, hard to explain the sound, like a fan is
> >>>running and you stick a pencil into it...I think. Now, the thing is, if
> >>>I pull the car over, pop the hood, wait like 10 mins, snap the hood,
> >>>and start driving, the sound is gone. When I popped the hood, the
> >>>engine was really hot but like I said, today was like 90 outside. So to
> >>>sum up..
> >>>
> >>>1. Drive on highway -- Fine.
> >>>2. Stop and go traffic on hot day --- start to hear clicking sound
> >>>follows by clanking sound.
> >>>3. Put car in Park the sound goes away.
> >>>4. Pop the hood, let the engine cool for a few minutes, the sound goes
> >>>away.
> >>>5. Recently had the Tranmission rebuilt, radiator replaced.
> >>>
> >>>
> >>>The thing is, it is hard to troubleshoot, if I take it to the repair
> >>>shop, I would have to have it making the sound but when it happens, I'm
> >>>afraid to keep on driving so I'd pull over and pop the hood to let it
> >>>cool now. I don't want to ruin whatever that is making that clanking
> >>>sound.
> >>>Also, the car has a strong hum sound, like ummmmmmmmmmm sound, could be
> >>>from the exhaust system, not sure if it's related.
> >>>
> >>>Any suggestion help , idea is really apreciated.
> >>>
> >>>-J.
> >>>
> >
> >
> Does it make the noise just when you are moving or if you put it in Park
> and rev the engine a bit will you hear it then too?
>
> Jeff DeWitt
#25
Guest
Posts: n/a
Re: clanking sound that driving me nuts.
Hi Jeff:
I have not put it in Park and Rev the engine, worth a try. I know when
I put it in drive, it would start to make the noise, even when stopped.
Jeff DeWitt wrote:
> lilgrasshopper@gmail.com wrote:
> > Hi Earle:
> >
> > All I can think of is:
> >
> > 1. Hot day.
> > 2. If I put the gear in anything but Park, it makes that clanking
> > sound.
> > 3. Faster I go, the faster the clanking.
> > 4. This is in slow stop and go traffic.
> >
> > So, in term of the engine, what spins when it's in Park and what spins
> > when it's in Drive. ? because something made it stop clanking when I'm
> > in park.
> >
> > Guess I can take it back to the transmission people to have them take a
> > look.
> >
> > Thanks,
> >
> > -J.
> > Earle Horton wrote:
> >
> >>Could the exhaust be banging on something? I think that way because putting
> >>in Park takes the torque off the drive train, and lets everything settle
> >>into its natural alignment. Could the transmission people have left out a
> >>bolt or two? Or a bracket? Motor mounts loose?
> >>
> >>"Clanking" makes me think of the flex plate, but those usually don't come
> >>and go. Or a u-joint, but those are not usually temperature related.
> >>
> >>If you can get under the vehicle, check all over for loose stuff, leaking
> >>fluid (any kind) or obvious missing bolts.
> >>
> >>Earle
> >>
> >><lilgrasshopper@gmail.com> wrote in message
> >>news:1153710466.306465.198680@p79g2000cwp.google groups.com...
> >>
> >>>Hi all,
> >>>
> >>>I have a 1995 Jeep Grand Cherokee from hell.
> >>>
> >>>I recently had the transmisson rebuilt. (It was not engaging). I also
> >>>had the radiator replaced. Because the engine was reving and the
> >>>transmission was not engaging, it blew the radiator.
> >>>
> >>>Now:
> >>>
> >>>I can drive on the highway all day and nothing bad will happen but once
> >>>I get into stop and go traffic, like today, on a hot day, I would start
> >>>to hear some clanking, then it would get louder, like something
> >>>spinning and hitting something else. If I press on the gas pedal to go
> >>>faster, the clanking sound would be faster, more frequent so I am
> >>>thinking it has something to do with something spinning while I press
> >>>on the gas pedal (yeah, really car smart there, lol), if I put it Park,
> >>>the sound goes away but if I put it in drive to start driving, it would
> >>>make the clanking sound, hard to explain the sound, like a fan is
> >>>running and you stick a pencil into it...I think. Now, the thing is, if
> >>>I pull the car over, pop the hood, wait like 10 mins, snap the hood,
> >>>and start driving, the sound is gone. When I popped the hood, the
> >>>engine was really hot but like I said, today was like 90 outside. So to
> >>>sum up..
> >>>
> >>>1. Drive on highway -- Fine.
> >>>2. Stop and go traffic on hot day --- start to hear clicking sound
> >>>follows by clanking sound.
> >>>3. Put car in Park the sound goes away.
> >>>4. Pop the hood, let the engine cool for a few minutes, the sound goes
> >>>away.
> >>>5. Recently had the Tranmission rebuilt, radiator replaced.
> >>>
> >>>
> >>>The thing is, it is hard to troubleshoot, if I take it to the repair
> >>>shop, I would have to have it making the sound but when it happens, I'm
> >>>afraid to keep on driving so I'd pull over and pop the hood to let it
> >>>cool now. I don't want to ruin whatever that is making that clanking
> >>>sound.
> >>>Also, the car has a strong hum sound, like ummmmmmmmmmm sound, could be
> >>>from the exhaust system, not sure if it's related.
> >>>
> >>>Any suggestion help , idea is really apreciated.
> >>>
> >>>-J.
> >>>
> >
> >
> Does it make the noise just when you are moving or if you put it in Park
> and rev the engine a bit will you hear it then too?
>
> Jeff DeWitt
I have not put it in Park and Rev the engine, worth a try. I know when
I put it in drive, it would start to make the noise, even when stopped.
Jeff DeWitt wrote:
> lilgrasshopper@gmail.com wrote:
> > Hi Earle:
> >
> > All I can think of is:
> >
> > 1. Hot day.
> > 2. If I put the gear in anything but Park, it makes that clanking
> > sound.
> > 3. Faster I go, the faster the clanking.
> > 4. This is in slow stop and go traffic.
> >
> > So, in term of the engine, what spins when it's in Park and what spins
> > when it's in Drive. ? because something made it stop clanking when I'm
> > in park.
> >
> > Guess I can take it back to the transmission people to have them take a
> > look.
> >
> > Thanks,
> >
> > -J.
> > Earle Horton wrote:
> >
> >>Could the exhaust be banging on something? I think that way because putting
> >>in Park takes the torque off the drive train, and lets everything settle
> >>into its natural alignment. Could the transmission people have left out a
> >>bolt or two? Or a bracket? Motor mounts loose?
> >>
> >>"Clanking" makes me think of the flex plate, but those usually don't come
> >>and go. Or a u-joint, but those are not usually temperature related.
> >>
> >>If you can get under the vehicle, check all over for loose stuff, leaking
> >>fluid (any kind) or obvious missing bolts.
> >>
> >>Earle
> >>
> >><lilgrasshopper@gmail.com> wrote in message
> >>news:1153710466.306465.198680@p79g2000cwp.google groups.com...
> >>
> >>>Hi all,
> >>>
> >>>I have a 1995 Jeep Grand Cherokee from hell.
> >>>
> >>>I recently had the transmisson rebuilt. (It was not engaging). I also
> >>>had the radiator replaced. Because the engine was reving and the
> >>>transmission was not engaging, it blew the radiator.
> >>>
> >>>Now:
> >>>
> >>>I can drive on the highway all day and nothing bad will happen but once
> >>>I get into stop and go traffic, like today, on a hot day, I would start
> >>>to hear some clanking, then it would get louder, like something
> >>>spinning and hitting something else. If I press on the gas pedal to go
> >>>faster, the clanking sound would be faster, more frequent so I am
> >>>thinking it has something to do with something spinning while I press
> >>>on the gas pedal (yeah, really car smart there, lol), if I put it Park,
> >>>the sound goes away but if I put it in drive to start driving, it would
> >>>make the clanking sound, hard to explain the sound, like a fan is
> >>>running and you stick a pencil into it...I think. Now, the thing is, if
> >>>I pull the car over, pop the hood, wait like 10 mins, snap the hood,
> >>>and start driving, the sound is gone. When I popped the hood, the
> >>>engine was really hot but like I said, today was like 90 outside. So to
> >>>sum up..
> >>>
> >>>1. Drive on highway -- Fine.
> >>>2. Stop and go traffic on hot day --- start to hear clicking sound
> >>>follows by clanking sound.
> >>>3. Put car in Park the sound goes away.
> >>>4. Pop the hood, let the engine cool for a few minutes, the sound goes
> >>>away.
> >>>5. Recently had the Tranmission rebuilt, radiator replaced.
> >>>
> >>>
> >>>The thing is, it is hard to troubleshoot, if I take it to the repair
> >>>shop, I would have to have it making the sound but when it happens, I'm
> >>>afraid to keep on driving so I'd pull over and pop the hood to let it
> >>>cool now. I don't want to ruin whatever that is making that clanking
> >>>sound.
> >>>Also, the car has a strong hum sound, like ummmmmmmmmmm sound, could be
> >>>from the exhaust system, not sure if it's related.
> >>>
> >>>Any suggestion help , idea is really apreciated.
> >>>
> >>>-J.
> >>>
> >
> >
> Does it make the noise just when you are moving or if you put it in Park
> and rev the engine a bit will you hear it then too?
>
> Jeff DeWitt
#26
Guest
Posts: n/a
Re: clanking sound that driving me nuts.
Hi guys:
What's a good book for cars? I know when it gets complicated like this,
take it to the shop, turn around and bend down but I'd like to read and
see how things work. (I work as a network Admin at my corp. inc).
Shilman? Shulman?
Thanks,
John,
Roosevelt, NJ
DougW wrote:
> lilgrasshopper@gmail.com wrote:
> > Hi all,
> >
> > I have a 1995 Jeep Grand Cherokee from hell.
>
> > I can drive on the highway all day and nothing bad will happen but
> > once I get into stop and go traffic, like today, on a hot day, I
> > would start to hear some clanking, then it would get louder, like
> > something spinning and hitting something else. If I press on the gas
> > pedal to go faster, the clanking sound would be faster, more frequent
> > so I am thinking it has something to do with something spinning while
>
> I hope I'm wrong, but that sounds like a bad rear mains bearing.
> They usually make a bad clank/grind noise when the engine is under load
> (like pulling a trailer) but eventually will make that noise even when
> taking off.
>
> Get yourself a big flat screwdriver or small pry bar. From under
> the engine see how far the harmonic balancer will pry forward from the
> engine and go back into the engine. It shouldn't move more than about
> 1/8" max. If it moves 1/4 like mine did way back when, then it's time
> for a shortblock. Do not pry hard.. and pry against the inner ring on
> the balancer. If it's going to move it will move easily.
>
> --
> DougW
What's a good book for cars? I know when it gets complicated like this,
take it to the shop, turn around and bend down but I'd like to read and
see how things work. (I work as a network Admin at my corp. inc).
Shilman? Shulman?
Thanks,
John,
Roosevelt, NJ
DougW wrote:
> lilgrasshopper@gmail.com wrote:
> > Hi all,
> >
> > I have a 1995 Jeep Grand Cherokee from hell.
>
> > I can drive on the highway all day and nothing bad will happen but
> > once I get into stop and go traffic, like today, on a hot day, I
> > would start to hear some clanking, then it would get louder, like
> > something spinning and hitting something else. If I press on the gas
> > pedal to go faster, the clanking sound would be faster, more frequent
> > so I am thinking it has something to do with something spinning while
>
> I hope I'm wrong, but that sounds like a bad rear mains bearing.
> They usually make a bad clank/grind noise when the engine is under load
> (like pulling a trailer) but eventually will make that noise even when
> taking off.
>
> Get yourself a big flat screwdriver or small pry bar. From under
> the engine see how far the harmonic balancer will pry forward from the
> engine and go back into the engine. It shouldn't move more than about
> 1/8" max. If it moves 1/4 like mine did way back when, then it's time
> for a shortblock. Do not pry hard.. and pry against the inner ring on
> the balancer. If it's going to move it will move easily.
>
> --
> DougW
#27
Guest
Posts: n/a
Re: clanking sound that driving me nuts.
Hi guys:
What's a good book for cars? I know when it gets complicated like this,
take it to the shop, turn around and bend down but I'd like to read and
see how things work. (I work as a network Admin at my corp. inc).
Shilman? Shulman?
Thanks,
John,
Roosevelt, NJ
DougW wrote:
> lilgrasshopper@gmail.com wrote:
> > Hi all,
> >
> > I have a 1995 Jeep Grand Cherokee from hell.
>
> > I can drive on the highway all day and nothing bad will happen but
> > once I get into stop and go traffic, like today, on a hot day, I
> > would start to hear some clanking, then it would get louder, like
> > something spinning and hitting something else. If I press on the gas
> > pedal to go faster, the clanking sound would be faster, more frequent
> > so I am thinking it has something to do with something spinning while
>
> I hope I'm wrong, but that sounds like a bad rear mains bearing.
> They usually make a bad clank/grind noise when the engine is under load
> (like pulling a trailer) but eventually will make that noise even when
> taking off.
>
> Get yourself a big flat screwdriver or small pry bar. From under
> the engine see how far the harmonic balancer will pry forward from the
> engine and go back into the engine. It shouldn't move more than about
> 1/8" max. If it moves 1/4 like mine did way back when, then it's time
> for a shortblock. Do not pry hard.. and pry against the inner ring on
> the balancer. If it's going to move it will move easily.
>
> --
> DougW
What's a good book for cars? I know when it gets complicated like this,
take it to the shop, turn around and bend down but I'd like to read and
see how things work. (I work as a network Admin at my corp. inc).
Shilman? Shulman?
Thanks,
John,
Roosevelt, NJ
DougW wrote:
> lilgrasshopper@gmail.com wrote:
> > Hi all,
> >
> > I have a 1995 Jeep Grand Cherokee from hell.
>
> > I can drive on the highway all day and nothing bad will happen but
> > once I get into stop and go traffic, like today, on a hot day, I
> > would start to hear some clanking, then it would get louder, like
> > something spinning and hitting something else. If I press on the gas
> > pedal to go faster, the clanking sound would be faster, more frequent
> > so I am thinking it has something to do with something spinning while
>
> I hope I'm wrong, but that sounds like a bad rear mains bearing.
> They usually make a bad clank/grind noise when the engine is under load
> (like pulling a trailer) but eventually will make that noise even when
> taking off.
>
> Get yourself a big flat screwdriver or small pry bar. From under
> the engine see how far the harmonic balancer will pry forward from the
> engine and go back into the engine. It shouldn't move more than about
> 1/8" max. If it moves 1/4 like mine did way back when, then it's time
> for a shortblock. Do not pry hard.. and pry against the inner ring on
> the balancer. If it's going to move it will move easily.
>
> --
> DougW
#28
Guest
Posts: n/a
Re: clanking sound that driving me nuts.
Hi guys:
What's a good book for cars? I know when it gets complicated like this,
take it to the shop, turn around and bend down but I'd like to read and
see how things work. (I work as a network Admin at my corp. inc).
Shilman? Shulman?
Thanks,
John,
Roosevelt, NJ
DougW wrote:
> lilgrasshopper@gmail.com wrote:
> > Hi all,
> >
> > I have a 1995 Jeep Grand Cherokee from hell.
>
> > I can drive on the highway all day and nothing bad will happen but
> > once I get into stop and go traffic, like today, on a hot day, I
> > would start to hear some clanking, then it would get louder, like
> > something spinning and hitting something else. If I press on the gas
> > pedal to go faster, the clanking sound would be faster, more frequent
> > so I am thinking it has something to do with something spinning while
>
> I hope I'm wrong, but that sounds like a bad rear mains bearing.
> They usually make a bad clank/grind noise when the engine is under load
> (like pulling a trailer) but eventually will make that noise even when
> taking off.
>
> Get yourself a big flat screwdriver or small pry bar. From under
> the engine see how far the harmonic balancer will pry forward from the
> engine and go back into the engine. It shouldn't move more than about
> 1/8" max. If it moves 1/4 like mine did way back when, then it's time
> for a shortblock. Do not pry hard.. and pry against the inner ring on
> the balancer. If it's going to move it will move easily.
>
> --
> DougW
What's a good book for cars? I know when it gets complicated like this,
take it to the shop, turn around and bend down but I'd like to read and
see how things work. (I work as a network Admin at my corp. inc).
Shilman? Shulman?
Thanks,
John,
Roosevelt, NJ
DougW wrote:
> lilgrasshopper@gmail.com wrote:
> > Hi all,
> >
> > I have a 1995 Jeep Grand Cherokee from hell.
>
> > I can drive on the highway all day and nothing bad will happen but
> > once I get into stop and go traffic, like today, on a hot day, I
> > would start to hear some clanking, then it would get louder, like
> > something spinning and hitting something else. If I press on the gas
> > pedal to go faster, the clanking sound would be faster, more frequent
> > so I am thinking it has something to do with something spinning while
>
> I hope I'm wrong, but that sounds like a bad rear mains bearing.
> They usually make a bad clank/grind noise when the engine is under load
> (like pulling a trailer) but eventually will make that noise even when
> taking off.
>
> Get yourself a big flat screwdriver or small pry bar. From under
> the engine see how far the harmonic balancer will pry forward from the
> engine and go back into the engine. It shouldn't move more than about
> 1/8" max. If it moves 1/4 like mine did way back when, then it's time
> for a shortblock. Do not pry hard.. and pry against the inner ring on
> the balancer. If it's going to move it will move easily.
>
> --
> DougW
#29
Guest
Posts: n/a
Re: clanking sound that driving me nuts.
Hi guys:
What's a good book for cars? I know when it gets complicated like this,
take it to the shop, turn around and bend down but I'd like to read and
see how things work. (I work as a network Admin at my corp. inc).
Shilman? Shulman?
Thanks,
John,
Roosevelt, NJ
DougW wrote:
> lilgrasshopper@gmail.com wrote:
> > Hi all,
> >
> > I have a 1995 Jeep Grand Cherokee from hell.
>
> > I can drive on the highway all day and nothing bad will happen but
> > once I get into stop and go traffic, like today, on a hot day, I
> > would start to hear some clanking, then it would get louder, like
> > something spinning and hitting something else. If I press on the gas
> > pedal to go faster, the clanking sound would be faster, more frequent
> > so I am thinking it has something to do with something spinning while
>
> I hope I'm wrong, but that sounds like a bad rear mains bearing.
> They usually make a bad clank/grind noise when the engine is under load
> (like pulling a trailer) but eventually will make that noise even when
> taking off.
>
> Get yourself a big flat screwdriver or small pry bar. From under
> the engine see how far the harmonic balancer will pry forward from the
> engine and go back into the engine. It shouldn't move more than about
> 1/8" max. If it moves 1/4 like mine did way back when, then it's time
> for a shortblock. Do not pry hard.. and pry against the inner ring on
> the balancer. If it's going to move it will move easily.
>
> --
> DougW
What's a good book for cars? I know when it gets complicated like this,
take it to the shop, turn around and bend down but I'd like to read and
see how things work. (I work as a network Admin at my corp. inc).
Shilman? Shulman?
Thanks,
John,
Roosevelt, NJ
DougW wrote:
> lilgrasshopper@gmail.com wrote:
> > Hi all,
> >
> > I have a 1995 Jeep Grand Cherokee from hell.
>
> > I can drive on the highway all day and nothing bad will happen but
> > once I get into stop and go traffic, like today, on a hot day, I
> > would start to hear some clanking, then it would get louder, like
> > something spinning and hitting something else. If I press on the gas
> > pedal to go faster, the clanking sound would be faster, more frequent
> > so I am thinking it has something to do with something spinning while
>
> I hope I'm wrong, but that sounds like a bad rear mains bearing.
> They usually make a bad clank/grind noise when the engine is under load
> (like pulling a trailer) but eventually will make that noise even when
> taking off.
>
> Get yourself a big flat screwdriver or small pry bar. From under
> the engine see how far the harmonic balancer will pry forward from the
> engine and go back into the engine. It shouldn't move more than about
> 1/8" max. If it moves 1/4 like mine did way back when, then it's time
> for a shortblock. Do not pry hard.. and pry against the inner ring on
> the balancer. If it's going to move it will move easily.
>
> --
> DougW
#30
Guest
Posts: n/a
Re: clanking sound that driving me nuts.
If you have a mechanical belt driven fan in that, I would suspect the
clutch on it has gone bad.
'Blew the rad' because it revved too much? That is ummm... BS.
If I can't run my Jeeps at full power (high revs) in low gears off road,
they are broken.
I also would be suspecting maybe they forgot to tighten down the tranny
mount or something, so when it goes in gear, it could be shifting over
or they left a bolt loose in the torque converter or the clank it the
bad fan clutch.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
lilgrasshopper@gmail.com wrote:
>
> Hi all,
>
> I have a 1995 Jeep Grand Cherokee from hell.
>
> I recently had the transmisson rebuilt. (It was not engaging). I also
> had the radiator replaced. Because the engine was reving and the
> transmission was not engaging, it blew the radiator.
>
> Now:
>
> I can drive on the highway all day and nothing bad will happen but once
> I get into stop and go traffic, like today, on a hot day, I would start
> to hear some clanking, then it would get louder, like something
> spinning and hitting something else. If I press on the gas pedal to go
> faster, the clanking sound would be faster, more frequent so I am
> thinking it has something to do with something spinning while I press
> on the gas pedal (yeah, really car smart there, lol), if I put it Park,
> the sound goes away but if I put it in drive to start driving, it would
> make the clanking sound, hard to explain the sound, like a fan is
> running and you stick a pencil into it...I think. Now, the thing is, if
> I pull the car over, pop the hood, wait like 10 mins, snap the hood,
> and start driving, the sound is gone. When I popped the hood, the
> engine was really hot but like I said, today was like 90 outside. So to
> sum up..
>
> 1. Drive on highway -- Fine.
> 2. Stop and go traffic on hot day --- start to hear clicking sound
> follows by clanking sound.
> 3. Put car in Park the sound goes away.
> 4. Pop the hood, let the engine cool for a few minutes, the sound goes
> away.
> 5. Recently had the Tranmission rebuilt, radiator replaced.
>
> The thing is, it is hard to troubleshoot, if I take it to the repair
> shop, I would have to have it making the sound but when it happens, I'm
> afraid to keep on driving so I'd pull over and pop the hood to let it
> cool now. I don't want to ruin whatever that is making that clanking
> sound.
> Also, the car has a strong hum sound, like ummmmmmmmmmm sound, could be
> from the exhaust system, not sure if it's related.
>
> Any suggestion help , idea is really apreciated.
>
> -J.
clutch on it has gone bad.
'Blew the rad' because it revved too much? That is ummm... BS.
If I can't run my Jeeps at full power (high revs) in low gears off road,
they are broken.
I also would be suspecting maybe they forgot to tighten down the tranny
mount or something, so when it goes in gear, it could be shifting over
or they left a bolt loose in the torque converter or the clank it the
bad fan clutch.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
lilgrasshopper@gmail.com wrote:
>
> Hi all,
>
> I have a 1995 Jeep Grand Cherokee from hell.
>
> I recently had the transmisson rebuilt. (It was not engaging). I also
> had the radiator replaced. Because the engine was reving and the
> transmission was not engaging, it blew the radiator.
>
> Now:
>
> I can drive on the highway all day and nothing bad will happen but once
> I get into stop and go traffic, like today, on a hot day, I would start
> to hear some clanking, then it would get louder, like something
> spinning and hitting something else. If I press on the gas pedal to go
> faster, the clanking sound would be faster, more frequent so I am
> thinking it has something to do with something spinning while I press
> on the gas pedal (yeah, really car smart there, lol), if I put it Park,
> the sound goes away but if I put it in drive to start driving, it would
> make the clanking sound, hard to explain the sound, like a fan is
> running and you stick a pencil into it...I think. Now, the thing is, if
> I pull the car over, pop the hood, wait like 10 mins, snap the hood,
> and start driving, the sound is gone. When I popped the hood, the
> engine was really hot but like I said, today was like 90 outside. So to
> sum up..
>
> 1. Drive on highway -- Fine.
> 2. Stop and go traffic on hot day --- start to hear clicking sound
> follows by clanking sound.
> 3. Put car in Park the sound goes away.
> 4. Pop the hood, let the engine cool for a few minutes, the sound goes
> away.
> 5. Recently had the Tranmission rebuilt, radiator replaced.
>
> The thing is, it is hard to troubleshoot, if I take it to the repair
> shop, I would have to have it making the sound but when it happens, I'm
> afraid to keep on driving so I'd pull over and pop the hood to let it
> cool now. I don't want to ruin whatever that is making that clanking
> sound.
> Also, the car has a strong hum sound, like ummmmmmmmmmm sound, could be
> from the exhaust system, not sure if it's related.
>
> Any suggestion help , idea is really apreciated.
>
> -J.