I have a '81 CJ5 that I'm pulling out the iron Duke and putting in a Chevy
V6. Anyone know a good vender that sells stainless steel pipes, bends, band
clamps and mufflers so I can fabricate my own system?

Thanks...Ted

 

Hi Ted,
It's a common swap, I'd buy the header from:
http://www.advanceadapters.com/acrobat/exhaust.pdf
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Ted Bobetsky wrote:
>
> I have a '81 CJ5 that I'm pulling out the iron Duke and putting in a Chevy
> V6. Anyone know a good vender that sells stainless steel pipes, bends, band
> clamps and mufflers so I can fabricate my own system?
>
> Thanks...Ted

 

Hi Ted,
It's a common swap, I'd buy the header from:
http://www.advanceadapters.com/acrobat/exhaust.pdf
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Ted Bobetsky wrote:
>
> I have a '81 CJ5 that I'm pulling out the iron Duke and putting in a Chevy
> V6. Anyone know a good vender that sells stainless steel pipes, bends, band
> clamps and mufflers so I can fabricate my own system?
>
> Thanks...Ted

 

Hi Ted,
It's a common swap, I'd buy the header from:
http://www.advanceadapters.com/acrobat/exhaust.pdf
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Ted Bobetsky wrote:
>
> I have a '81 CJ5 that I'm pulling out the iron Duke and putting in a Chevy
> V6. Anyone know a good vender that sells stainless steel pipes, bends, band
> clamps and mufflers so I can fabricate my own system?
>
> Thanks...Ted

 

I would stop by a few muffler shops over on the industrial side of town.
Dial in on the Mom & Pop stores, and shy away from the national franchise
operations. The Mom & Pop stores will generally be very accomodating in the
custom designs, and they will allow you to mill around the job site while
they are working. I installed a Borla header, and needed the exhaust system
that I had jpurchased about 6 months earlier to be modified and mounted to
my CJ, and the Mom & Pop muffler shop did a great job for a reasonable
price.




"Ted Bobetsky" <flyfisher@flyfishing-the-salt.com> wrote in message
news:rYBwb.16$FF5.13147@petpeeve.ziplink.net...
> I have a '81 CJ5 that I'm pulling out the iron Duke and putting in a Chevy
> V6. Anyone know a good vender that sells stainless steel pipes, bends,
band
> clamps and mufflers so I can fabricate my own system?
>
> Thanks...Ted
>
>

 

I would stop by a few muffler shops over on the industrial side of town.
Dial in on the Mom & Pop stores, and shy away from the national franchise
operations. The Mom & Pop stores will generally be very accomodating in the
custom designs, and they will allow you to mill around the job site while
they are working. I installed a Borla header, and needed the exhaust system
that I had jpurchased about 6 months earlier to be modified and mounted to
my CJ, and the Mom & Pop muffler shop did a great job for a reasonable
price.




"Ted Bobetsky" <flyfisher@flyfishing-the-salt.com> wrote in message
news:rYBwb.16$FF5.13147@petpeeve.ziplink.net...
> I have a '81 CJ5 that I'm pulling out the iron Duke and putting in a Chevy
> V6. Anyone know a good vender that sells stainless steel pipes, bends,
band
> clamps and mufflers so I can fabricate my own system?
>
> Thanks...Ted
>
>

 

I would stop by a few muffler shops over on the industrial side of town.
Dial in on the Mom & Pop stores, and shy away from the national franchise
operations. The Mom & Pop stores will generally be very accomodating in the
custom designs, and they will allow you to mill around the job site while
they are working. I installed a Borla header, and needed the exhaust system
that I had jpurchased about 6 months earlier to be modified and mounted to
my CJ, and the Mom & Pop muffler shop did a great job for a reasonable
price.




"Ted Bobetsky" <flyfisher@flyfishing-the-salt.com> wrote in message
news:rYBwb.16$FF5.13147@petpeeve.ziplink.net...
> I have a '81 CJ5 that I'm pulling out the iron Duke and putting in a Chevy
> V6. Anyone know a good vender that sells stainless steel pipes, bends,
band
> clamps and mufflers so I can fabricate my own system?
>
> Thanks...Ted
>
>

 

Ted,
The best place for the stainless parts is Burns Stainless.
http://www.burnsstainless.com/
...Mike

"Ted Bobetsky" <flyfisher@flyfishing-the-salt.com> wrote in message
news:rYBwb.16$FF5.13147@petpeeve.ziplink.net...
> I have a '81 CJ5 that I'm pulling out the iron Duke and putting in a Chevy
> V6. Anyone know a good vender that sells stainless steel pipes, bends,
band
> clamps and mufflers so I can fabricate my own system?
>
> Thanks...Ted
>
>
>

 

Ted,
The best place for the stainless parts is Burns Stainless.
http://www.burnsstainless.com/
...Mike

"Ted Bobetsky" <flyfisher@flyfishing-the-salt.com> wrote in message
news:rYBwb.16$FF5.13147@petpeeve.ziplink.net...
> I have a '81 CJ5 that I'm pulling out the iron Duke and putting in a Chevy
> V6. Anyone know a good vender that sells stainless steel pipes, bends,
band
> clamps and mufflers so I can fabricate my own system?
>
> Thanks...Ted
>
>
>

 

Ted,
The best place for the stainless parts is Burns Stainless.
http://www.burnsstainless.com/
...Mike

"Ted Bobetsky" <flyfisher@flyfishing-the-salt.com> wrote in message
news:rYBwb.16$FF5.13147@petpeeve.ziplink.net...
> I have a '81 CJ5 that I'm pulling out the iron Duke and putting in a Chevy
> V6. Anyone know a good vender that sells stainless steel pipes, bends,
band
> clamps and mufflers so I can fabricate my own system?
>
> Thanks...Ted
>
>
>