CJ handling problems after 4" lift
#61
Guest
Posts: n/a
Re: CJ handling problems after 4" lift
That could be, the added length is about the size of the bracing.
"David Harmon" <source@netcom.com> wrote in message
news:4324964b.511294468@news.west.earthlink.net...
> On Wed, 18 May 2005 10:49:31 -0700 in rec.autos.makers.jeep+******,
> "Jeff Strickland" <spamcatcher@yahoo.net> wrote,
> > I have the ConFer heavy duty
> >shackles, and they are just a fraction of an inch longer than stock, I
> >assume this is because the material is so much beefier that they needed
the
> >space avoid compromising the strength after they drilled the holes.
>
> I think it is because they needed to make room for the extra brace in
> the middle, that the originals don't have.
>
"David Harmon" <source@netcom.com> wrote in message
news:4324964b.511294468@news.west.earthlink.net...
> On Wed, 18 May 2005 10:49:31 -0700 in rec.autos.makers.jeep+******,
> "Jeff Strickland" <spamcatcher@yahoo.net> wrote,
> > I have the ConFer heavy duty
> >shackles, and they are just a fraction of an inch longer than stock, I
> >assume this is because the material is so much beefier that they needed
the
> >space avoid compromising the strength after they drilled the holes.
>
> I think it is because they needed to make room for the extra brace in
> the middle, that the originals don't have.
>
Thread
Thread Starter
Forum
Replies
Last Post
William Oliveri
Jeep Mailing List
33
01-12-2004 10:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)