Circuit breakers vs fuses
12-29-2003, 03:27 PM
#11
Guest
Posts: n/a
Re: Circuit breakers vs fuses
All of the commercial trucks I've driven used circuit breakers.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I have seen PB relays in electronic circuits lots, but never have I seen
> one of their circuit breakers used for electronics.
>
> I also couldn't find any speed rating for them which implies they are
> just regular breakers.
>
> I sure wouldn't use them.
>
> Mike
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I have seen PB relays in electronic circuits lots, but never have I seen
> one of their circuit breakers used for electronics.
>
> I also couldn't find any speed rating for them which implies they are
> just regular breakers.
>
> I sure wouldn't use them.
>
> Mike
12-29-2003, 03:27 PM
#12
Guest
Posts: n/a
Re: Circuit breakers vs fuses
All of the commercial trucks I've driven used circuit breakers.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I have seen PB relays in electronic circuits lots, but never have I seen
> one of their circuit breakers used for electronics.
>
> I also couldn't find any speed rating for them which implies they are
> just regular breakers.
>
> I sure wouldn't use them.
>
> Mike
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I have seen PB relays in electronic circuits lots, but never have I seen
> one of their circuit breakers used for electronics.
>
> I also couldn't find any speed rating for them which implies they are
> just regular breakers.
>
> I sure wouldn't use them.
>
> Mike
12-29-2003, 03:27 PM
#13
Guest
Posts: n/a
Re: Circuit breakers vs fuses
All of the commercial trucks I've driven used circuit breakers.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I have seen PB relays in electronic circuits lots, but never have I seen
> one of their circuit breakers used for electronics.
>
> I also couldn't find any speed rating for them which implies they are
> just regular breakers.
>
> I sure wouldn't use them.
>
> Mike
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> I have seen PB relays in electronic circuits lots, but never have I seen
> one of their circuit breakers used for electronics.
>
> I also couldn't find any speed rating for them which implies they are
> just regular breakers.
>
> I sure wouldn't use them.
>
> Mike
12-29-2003, 03:37 PM
#14
Guest
Posts: n/a
Re: Circuit breakers vs fuses
I will agree with Mike on this one. Why would you want to spend that kind
of money on a breaker setup? Are you buying that many fuses? If so, fix
the problem that's blowing fuses.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Kevin" <Kevin@el.net> wrote in message
news:Rs_Hb.6579$xX.15391@attbi_s02...
> Mike Romain wrote:
> > Unless you buy really expensive breakers, they are a lot slower than
> > fuses.
> >
> > Things like stereos and computers and about any other electronic part
> > you want to name work best/safest when fused. By the time some IC chip
> > circuits see an overload big enough to pop a mechanical breaker, they
> > are long dead.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Kevin wrote:
> >
>
>>/www.chiefaircraft.com/cgi-bin/frame-aircraft.cgi?URL=/Aircraft/Installati
onSupply/CircuitBreakers.html
> >>
> >>I am thinking about replacing the fuses in my 99 TJ with push-pull type
> >>aircraft breakers. I am going to make another overhead panel to hold the
> >>breakers for easier access.
> >>
>
>>http://www.jeepboard.net/modules.php...20&op=modload&
name=gallery&file=index&include=view_photo.php
> >>
> >>I plan to mount the breakers in a panel forward of the electrical panel.
> >>
> >>Other than expense is there any other valid reason they uses fuses in
> >>autos instead of breakers?
>
>
> The breakers I am looking at run $14. to $22. each and are used to
> protect avonics in aircraft.
>
of money on a breaker setup? Are you buying that many fuses? If so, fix
the problem that's blowing fuses.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Kevin" <Kevin@el.net> wrote in message
news:Rs_Hb.6579$xX.15391@attbi_s02...
> Mike Romain wrote:
> > Unless you buy really expensive breakers, they are a lot slower than
> > fuses.
> >
> > Things like stereos and computers and about any other electronic part
> > you want to name work best/safest when fused. By the time some IC chip
> > circuits see an overload big enough to pop a mechanical breaker, they
> > are long dead.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Kevin wrote:
> >
>
>>/www.chiefaircraft.com/cgi-bin/frame-aircraft.cgi?URL=/Aircraft/Installati
onSupply/CircuitBreakers.html
> >>
> >>I am thinking about replacing the fuses in my 99 TJ with push-pull type
> >>aircraft breakers. I am going to make another overhead panel to hold the
> >>breakers for easier access.
> >>
>
>>http://www.jeepboard.net/modules.php...20&op=modload&
name=gallery&file=index&include=view_photo.php
> >>
> >>I plan to mount the breakers in a panel forward of the electrical panel.
> >>
> >>Other than expense is there any other valid reason they uses fuses in
> >>autos instead of breakers?
>
>
> The breakers I am looking at run $14. to $22. each and are used to
> protect avonics in aircraft.
>
12-29-2003, 03:37 PM
#15
Guest
Posts: n/a
Re: Circuit breakers vs fuses
I will agree with Mike on this one. Why would you want to spend that kind
of money on a breaker setup? Are you buying that many fuses? If so, fix
the problem that's blowing fuses.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Kevin" <Kevin@el.net> wrote in message
news:Rs_Hb.6579$xX.15391@attbi_s02...
> Mike Romain wrote:
> > Unless you buy really expensive breakers, they are a lot slower than
> > fuses.
> >
> > Things like stereos and computers and about any other electronic part
> > you want to name work best/safest when fused. By the time some IC chip
> > circuits see an overload big enough to pop a mechanical breaker, they
> > are long dead.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Kevin wrote:
> >
>
>>/www.chiefaircraft.com/cgi-bin/frame-aircraft.cgi?URL=/Aircraft/Installati
onSupply/CircuitBreakers.html
> >>
> >>I am thinking about replacing the fuses in my 99 TJ with push-pull type
> >>aircraft breakers. I am going to make another overhead panel to hold the
> >>breakers for easier access.
> >>
>
>>http://www.jeepboard.net/modules.php...20&op=modload&
name=gallery&file=index&include=view_photo.php
> >>
> >>I plan to mount the breakers in a panel forward of the electrical panel.
> >>
> >>Other than expense is there any other valid reason they uses fuses in
> >>autos instead of breakers?
>
>
> The breakers I am looking at run $14. to $22. each and are used to
> protect avonics in aircraft.
>
of money on a breaker setup? Are you buying that many fuses? If so, fix
the problem that's blowing fuses.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Kevin" <Kevin@el.net> wrote in message
news:Rs_Hb.6579$xX.15391@attbi_s02...
> Mike Romain wrote:
> > Unless you buy really expensive breakers, they are a lot slower than
> > fuses.
> >
> > Things like stereos and computers and about any other electronic part
> > you want to name work best/safest when fused. By the time some IC chip
> > circuits see an overload big enough to pop a mechanical breaker, they
> > are long dead.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Kevin wrote:
> >
>
>>/www.chiefaircraft.com/cgi-bin/frame-aircraft.cgi?URL=/Aircraft/Installati
onSupply/CircuitBreakers.html
> >>
> >>I am thinking about replacing the fuses in my 99 TJ with push-pull type
> >>aircraft breakers. I am going to make another overhead panel to hold the
> >>breakers for easier access.
> >>
>
>>http://www.jeepboard.net/modules.php...20&op=modload&
name=gallery&file=index&include=view_photo.php
> >>
> >>I plan to mount the breakers in a panel forward of the electrical panel.
> >>
> >>Other than expense is there any other valid reason they uses fuses in
> >>autos instead of breakers?
>
>
> The breakers I am looking at run $14. to $22. each and are used to
> protect avonics in aircraft.
>
12-29-2003, 03:37 PM
#16
Guest
Posts: n/a
Re: Circuit breakers vs fuses
I will agree with Mike on this one. Why would you want to spend that kind
of money on a breaker setup? Are you buying that many fuses? If so, fix
the problem that's blowing fuses.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Kevin" <Kevin@el.net> wrote in message
news:Rs_Hb.6579$xX.15391@attbi_s02...
> Mike Romain wrote:
> > Unless you buy really expensive breakers, they are a lot slower than
> > fuses.
> >
> > Things like stereos and computers and about any other electronic part
> > you want to name work best/safest when fused. By the time some IC chip
> > circuits see an overload big enough to pop a mechanical breaker, they
> > are long dead.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Kevin wrote:
> >
>
>>/www.chiefaircraft.com/cgi-bin/frame-aircraft.cgi?URL=/Aircraft/Installati
onSupply/CircuitBreakers.html
> >>
> >>I am thinking about replacing the fuses in my 99 TJ with push-pull type
> >>aircraft breakers. I am going to make another overhead panel to hold the
> >>breakers for easier access.
> >>
>
>>http://www.jeepboard.net/modules.php...20&op=modload&
name=gallery&file=index&include=view_photo.php
> >>
> >>I plan to mount the breakers in a panel forward of the electrical panel.
> >>
> >>Other than expense is there any other valid reason they uses fuses in
> >>autos instead of breakers?
>
>
> The breakers I am looking at run $14. to $22. each and are used to
> protect avonics in aircraft.
>
of money on a breaker setup? Are you buying that many fuses? If so, fix
the problem that's blowing fuses.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Kevin" <Kevin@el.net> wrote in message
news:Rs_Hb.6579$xX.15391@attbi_s02...
> Mike Romain wrote:
> > Unless you buy really expensive breakers, they are a lot slower than
> > fuses.
> >
> > Things like stereos and computers and about any other electronic part
> > you want to name work best/safest when fused. By the time some IC chip
> > circuits see an overload big enough to pop a mechanical breaker, they
> > are long dead.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Kevin wrote:
> >
>
>>/www.chiefaircraft.com/cgi-bin/frame-aircraft.cgi?URL=/Aircraft/Installati
onSupply/CircuitBreakers.html
> >>
> >>I am thinking about replacing the fuses in my 99 TJ with push-pull type
> >>aircraft breakers. I am going to make another overhead panel to hold the
> >>breakers for easier access.
> >>
>
>>http://www.jeepboard.net/modules.php...20&op=modload&
name=gallery&file=index&include=view_photo.php
> >>
> >>I plan to mount the breakers in a panel forward of the electrical panel.
> >>
> >>Other than expense is there any other valid reason they uses fuses in
> >>autos instead of breakers?
>
>
> The breakers I am looking at run $14. to $22. each and are used to
> protect avonics in aircraft.
>
12-29-2003, 03:42 PM
#17
Guest
Posts: n/a
Re: Circuit breakers vs fuses
Hi Bill,
No doubt breakers are used in aircraft, boats (like my 270 SeaRay) and
commercial trucks. I guess it's for quick reset under emergency conditions.
When properly sized they can be nearly as effective as a fuse. The cost is
substantially more though.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FF08E34.471F358A@***.net...
> All of the commercial trucks I've driven used circuit breakers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
> >
> > I have seen PB relays in electronic circuits lots, but never have I seen
> > one of their circuit breakers used for electronics.
> >
> > I also couldn't find any speed rating for them which implies they are
> > just regular breakers.
> >
> > I sure wouldn't use them.
> >
> > Mike
No doubt breakers are used in aircraft, boats (like my 270 SeaRay) and
commercial trucks. I guess it's for quick reset under emergency conditions.
When properly sized they can be nearly as effective as a fuse. The cost is
substantially more though.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FF08E34.471F358A@***.net...
> All of the commercial trucks I've driven used circuit breakers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
> >
> > I have seen PB relays in electronic circuits lots, but never have I seen
> > one of their circuit breakers used for electronics.
> >
> > I also couldn't find any speed rating for them which implies they are
> > just regular breakers.
> >
> > I sure wouldn't use them.
> >
> > Mike
12-29-2003, 03:42 PM
#18
Guest
Posts: n/a
Re: Circuit breakers vs fuses
Hi Bill,
No doubt breakers are used in aircraft, boats (like my 270 SeaRay) and
commercial trucks. I guess it's for quick reset under emergency conditions.
When properly sized they can be nearly as effective as a fuse. The cost is
substantially more though.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FF08E34.471F358A@***.net...
> All of the commercial trucks I've driven used circuit breakers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
> >
> > I have seen PB relays in electronic circuits lots, but never have I seen
> > one of their circuit breakers used for electronics.
> >
> > I also couldn't find any speed rating for them which implies they are
> > just regular breakers.
> >
> > I sure wouldn't use them.
> >
> > Mike
No doubt breakers are used in aircraft, boats (like my 270 SeaRay) and
commercial trucks. I guess it's for quick reset under emergency conditions.
When properly sized they can be nearly as effective as a fuse. The cost is
substantially more though.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FF08E34.471F358A@***.net...
> All of the commercial trucks I've driven used circuit breakers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
> >
> > I have seen PB relays in electronic circuits lots, but never have I seen
> > one of their circuit breakers used for electronics.
> >
> > I also couldn't find any speed rating for them which implies they are
> > just regular breakers.
> >
> > I sure wouldn't use them.
> >
> > Mike
12-29-2003, 03:42 PM
#19
Guest
Posts: n/a
Re: Circuit breakers vs fuses
Hi Bill,
No doubt breakers are used in aircraft, boats (like my 270 SeaRay) and
commercial trucks. I guess it's for quick reset under emergency conditions.
When properly sized they can be nearly as effective as a fuse. The cost is
substantially more though.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FF08E34.471F358A@***.net...
> All of the commercial trucks I've driven used circuit breakers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
> >
> > I have seen PB relays in electronic circuits lots, but never have I seen
> > one of their circuit breakers used for electronics.
> >
> > I also couldn't find any speed rating for them which implies they are
> > just regular breakers.
> >
> > I sure wouldn't use them.
> >
> > Mike
No doubt breakers are used in aircraft, boats (like my 270 SeaRay) and
commercial trucks. I guess it's for quick reset under emergency conditions.
When properly sized they can be nearly as effective as a fuse. The cost is
substantially more though.
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FF08E34.471F358A@***.net...
> All of the commercial trucks I've driven used circuit breakers.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
> >
> > I have seen PB relays in electronic circuits lots, but never have I seen
> > one of their circuit breakers used for electronics.
> >
> > I also couldn't find any speed rating for them which implies they are
> > just regular breakers.
> >
> > I sure wouldn't use them.
> >
> > Mike
Thread
Thread Starter
Forum
Replies
Last Post
Scott S.
Jeep Mailing List
24
01-23-2006 10:57 PM
KoRn Kid® (Child of the KoRn)
Jeep Mailing List
16
06-05-2005 03:11 PM
Kyle
Jeep Mailing List
6
10-17-2003 10:48 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
