Gunner

On Wed, 25 Jan 2006 07:16:53 GMT, "Grumman-581"
<grumman581@DIE-SPAMMER-SCUM@gmail.com> wrote:

>"Richard J Kinch" <kinch@truetex.com> wrote in message
>news:Xns975613FB99DCAsomeconundrum@216.196.97.131 ...
>> Here is my design for a bumper-mounted Jeep Wrangler TJ trailer hitch:
>
>I would think that welding a 2" receiver hitch receptacle to the bottom of
>the angle bracket would give you more flexibility... It would lower the
>trailer tongue enough that you probably wouldn't have to worry about your
>door hitting it... If your vehicle is lifted, you could use a 2" receiver
>with a drop so that the trailer could be towed in a more level attitude...
>You would also have the option to use the 2" receiver for a bike rack or
>cargo carrier...
>
I agree. Well said.

Gunner

"Deep in her heart, every moslem woman yearns to show us her ----"
John Griffin

Gunner

On Wed, 25 Jan 2006 07:16:53 GMT, "Grumman-581"
<grumman581@DIE-SPAMMER-SCUM@gmail.com> wrote:

>"Richard J Kinch" <kinch@truetex.com> wrote in message
>news:Xns975613FB99DCAsomeconundrum@216.196.97.131 ...
>> Here is my design for a bumper-mounted Jeep Wrangler TJ trailer hitch:
>
>I would think that welding a 2" receiver hitch receptacle to the bottom of
>the angle bracket would give you more flexibility... It would lower the
>trailer tongue enough that you probably wouldn't have to worry about your
>door hitting it... If your vehicle is lifted, you could use a 2" receiver
>with a drop so that the trailer could be towed in a more level attitude...
>You would also have the option to use the 2" receiver for a bike rack or
>cargo carrier...
>
I agree. Well said.

Gunner

"Deep in her heart, every moslem woman yearns to show us her ----"
John Griffin

Gunner

On Wed, 25 Jan 2006 07:16:53 GMT, "Grumman-581"
<grumman581@DIE-SPAMMER-SCUM@gmail.com> wrote:

>"Richard J Kinch" <kinch@truetex.com> wrote in message
>news:Xns975613FB99DCAsomeconundrum@216.196.97.131 ...
>> Here is my design for a bumper-mounted Jeep Wrangler TJ trailer hitch:
>
>I would think that welding a 2" receiver hitch receptacle to the bottom of
>the angle bracket would give you more flexibility... It would lower the
>trailer tongue enough that you probably wouldn't have to worry about your
>door hitting it... If your vehicle is lifted, you could use a 2" receiver
>with a drop so that the trailer could be towed in a more level attitude...
>You would also have the option to use the 2" receiver for a bike rack or
>cargo carrier...
>
I agree. Well said.

Gunner

"Deep in her heart, every moslem woman yearns to show us her ----"
John Griffin

Tomes

Nice and simple. The thing I am worried about is the strength of the
connection between the bumper and the Jeep itself.
Tomes

"Richard J Kinch" <kinch@truetex.com> wrote in message
news:Xns975613FB99DCAsomeconundrum@216.196.97.131. ..
> Here is my design for a bumper-mounted Jeep Wrangler TJ trailer hitch:
>
> http://www.truetex.com/jeep_trailer_hitch_bracket.htm

Tomes

Nice and simple. The thing I am worried about is the strength of the
connection between the bumper and the Jeep itself.
Tomes

"Richard J Kinch" <kinch@truetex.com> wrote in message
news:Xns975613FB99DCAsomeconundrum@216.196.97.131. ..
> Here is my design for a bumper-mounted Jeep Wrangler TJ trailer hitch:
>
> http://www.truetex.com/jeep_trailer_hitch_bracket.htm

Tomes

Nice and simple. The thing I am worried about is the strength of the
connection between the bumper and the Jeep itself.
Tomes

"Richard J Kinch" <kinch@truetex.com> wrote in message
news:Xns975613FB99DCAsomeconundrum@216.196.97.131. ..
> Here is my design for a bumper-mounted Jeep Wrangler TJ trailer hitch:
>
> http://www.truetex.com/jeep_trailer_hitch_bracket.htm

RoyJ

The bumper on the Wrangler is not not strong enougth for trailer loading
to the 2000 pound towing capacity of the Jeep (assuming you have the
6cyl and 2000 pound rated capacity)

I'm fairly certain that I could grab a 2' pipe wrench and give that
hitch a good flexing without too much trouble.

Richard J Kinch wrote:
> Here is my design for a bumper-mounted Jeep Wrangler TJ trailer hitch:
>
> http://www.truetex.com/jeep_trailer_hitch_bracket.htm

RoyJ

The bumper on the Wrangler is not not strong enougth for trailer loading
to the 2000 pound towing capacity of the Jeep (assuming you have the
6cyl and 2000 pound rated capacity)

I'm fairly certain that I could grab a 2' pipe wrench and give that
hitch a good flexing without too much trouble.

Richard J Kinch wrote:
> Here is my design for a bumper-mounted Jeep Wrangler TJ trailer hitch:
>
> http://www.truetex.com/jeep_trailer_hitch_bracket.htm

RoyJ

The bumper on the Wrangler is not not strong enougth for trailer loading
to the 2000 pound towing capacity of the Jeep (assuming you have the
6cyl and 2000 pound rated capacity)

I'm fairly certain that I could grab a 2' pipe wrench and give that
hitch a good flexing without too much trouble.

Richard J Kinch wrote:
> Here is my design for a bumper-mounted Jeep Wrangler TJ trailer hitch:
>
> http://www.truetex.com/jeep_trailer_hitch_bracket.htm

twaldron

While I'm sure there are some extremely light duty applications where
this would suffice and be more cost effective, a 2" drawbar type hitch
is FAR more versatile. Especially one integrated into a bumper. On that
note, the added 'tail' to the vehicle reduces departure angle. I'd hate
to come down on a rock with that. For those reasons, I'd personally
never consider purchasing this type of hitch. I wish you good luck with
your design, however. Let us know how it works out.

tw
__________________________________________________ ___________________
2003 TJ Rubicon * 2001 XJ Sport * 1971 Bill Stroppe Baja Bronco

"There is a very fine line between 'hobby' and 'mental illness'."

Pronunciation: 'jEp Function: noun Date: 1940

Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80" wheelbase, 1/4-ton
capacity and four-wheel drive used by the U.S. army in World War II.
__________________________________________________ ___________________

Richard J Kinch wrote:
> Here is my design for a bumper-mounted Jeep Wrangler TJ trailer hitch:
>
> http://www.truetex.com/jeep_trailer_hitch_bracket.htm