Broken Bolt
#11
Guest
Posts: n/a
Re: Broken Bolt
Thanks both. Sorry I dint continue the subject in my first post.
That's what I new in my heart but could'nt bear to tell myself after
working on this 7 hrs today and the bolt broke when I was torqueing
everything up with a torque wrench. I had read 30 lbs but never heard
the click not sure if the bolt was FUBAR to begin with as I never
really torqued it hard :-(
Well I'm taking off another day tomorrow to work on this and to get it
right!
That's what I new in my heart but could'nt bear to tell myself after
working on this 7 hrs today and the bolt broke when I was torqueing
everything up with a torque wrench. I had read 30 lbs but never heard
the click not sure if the bolt was FUBAR to begin with as I never
really torqued it hard :-(
Well I'm taking off another day tomorrow to work on this and to get it
right!
#12
Guest
Posts: n/a
Re: Broken Bolt
Thanks both. Sorry I dint continue the subject in my first post.
That's what I new in my heart but could'nt bear to tell myself after
working on this 7 hrs today and the bolt broke when I was torqueing
everything up with a torque wrench. I had read 30 lbs but never heard
the click not sure if the bolt was FUBAR to begin with as I never
really torqued it hard :-(
Well I'm taking off another day tomorrow to work on this and to get it
right!
That's what I new in my heart but could'nt bear to tell myself after
working on this 7 hrs today and the bolt broke when I was torqueing
everything up with a torque wrench. I had read 30 lbs but never heard
the click not sure if the bolt was FUBAR to begin with as I never
really torqued it hard :-(
Well I'm taking off another day tomorrow to work on this and to get it
right!
#13
Guest
Posts: n/a
Re: Broken Bolt
Thanks both. Sorry I dint continue the subject in my first post.
That's what I new in my heart but could'nt bear to tell myself after
working on this 7 hrs today and the bolt broke when I was torqueing
everything up with a torque wrench. I had read 30 lbs but never heard
the click not sure if the bolt was FUBAR to begin with as I never
really torqued it hard :-(
Well I'm taking off another day tomorrow to work on this and to get it
right!
That's what I new in my heart but could'nt bear to tell myself after
working on this 7 hrs today and the bolt broke when I was torqueing
everything up with a torque wrench. I had read 30 lbs but never heard
the click not sure if the bolt was FUBAR to begin with as I never
really torqued it hard :-(
Well I'm taking off another day tomorrow to work on this and to get it
right!
#14
Guest
Posts: n/a
Re: Broken Bolt
When you have the housing off inspect it for cracks, if you think it may
have over-torqued. Aluminum is not too forgiving for overtorqued bolts.
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1141778357.211010.71330@v46g2000cwv.googlegro ups.com...
> Thanks both. Sorry I dint continue the subject in my first post.
> That's what I new in my heart but could'nt bear to tell myself after
> working on this 7 hrs today and the bolt broke when I was torqueing
> everything up with a torque wrench. I had read 30 lbs but never heard
> the click not sure if the bolt was FUBAR to begin with as I never
> really torqued it hard :-(
>
> Well I'm taking off another day tomorrow to work on this and to get it
> right!
>
have over-torqued. Aluminum is not too forgiving for overtorqued bolts.
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1141778357.211010.71330@v46g2000cwv.googlegro ups.com...
> Thanks both. Sorry I dint continue the subject in my first post.
> That's what I new in my heart but could'nt bear to tell myself after
> working on this 7 hrs today and the bolt broke when I was torqueing
> everything up with a torque wrench. I had read 30 lbs but never heard
> the click not sure if the bolt was FUBAR to begin with as I never
> really torqued it hard :-(
>
> Well I'm taking off another day tomorrow to work on this and to get it
> right!
>
#15
Guest
Posts: n/a
Re: Broken Bolt
When you have the housing off inspect it for cracks, if you think it may
have over-torqued. Aluminum is not too forgiving for overtorqued bolts.
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1141778357.211010.71330@v46g2000cwv.googlegro ups.com...
> Thanks both. Sorry I dint continue the subject in my first post.
> That's what I new in my heart but could'nt bear to tell myself after
> working on this 7 hrs today and the bolt broke when I was torqueing
> everything up with a torque wrench. I had read 30 lbs but never heard
> the click not sure if the bolt was FUBAR to begin with as I never
> really torqued it hard :-(
>
> Well I'm taking off another day tomorrow to work on this and to get it
> right!
>
have over-torqued. Aluminum is not too forgiving for overtorqued bolts.
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1141778357.211010.71330@v46g2000cwv.googlegro ups.com...
> Thanks both. Sorry I dint continue the subject in my first post.
> That's what I new in my heart but could'nt bear to tell myself after
> working on this 7 hrs today and the bolt broke when I was torqueing
> everything up with a torque wrench. I had read 30 lbs but never heard
> the click not sure if the bolt was FUBAR to begin with as I never
> really torqued it hard :-(
>
> Well I'm taking off another day tomorrow to work on this and to get it
> right!
>
#16
Guest
Posts: n/a
Re: Broken Bolt
When you have the housing off inspect it for cracks, if you think it may
have over-torqued. Aluminum is not too forgiving for overtorqued bolts.
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1141778357.211010.71330@v46g2000cwv.googlegro ups.com...
> Thanks both. Sorry I dint continue the subject in my first post.
> That's what I new in my heart but could'nt bear to tell myself after
> working on this 7 hrs today and the bolt broke when I was torqueing
> everything up with a torque wrench. I had read 30 lbs but never heard
> the click not sure if the bolt was FUBAR to begin with as I never
> really torqued it hard :-(
>
> Well I'm taking off another day tomorrow to work on this and to get it
> right!
>
have over-torqued. Aluminum is not too forgiving for overtorqued bolts.
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1141778357.211010.71330@v46g2000cwv.googlegro ups.com...
> Thanks both. Sorry I dint continue the subject in my first post.
> That's what I new in my heart but could'nt bear to tell myself after
> working on this 7 hrs today and the bolt broke when I was torqueing
> everything up with a torque wrench. I had read 30 lbs but never heard
> the click not sure if the bolt was FUBAR to begin with as I never
> really torqued it hard :-(
>
> Well I'm taking off another day tomorrow to work on this and to get it
> right!
>
#17
Guest
Posts: n/a
Re: Broken Bolt
When you have the housing off inspect it for cracks, if you think it may
have over-torqued. Aluminum is not too forgiving for overtorqued bolts.
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1141778357.211010.71330@v46g2000cwv.googlegro ups.com...
> Thanks both. Sorry I dint continue the subject in my first post.
> That's what I new in my heart but could'nt bear to tell myself after
> working on this 7 hrs today and the bolt broke when I was torqueing
> everything up with a torque wrench. I had read 30 lbs but never heard
> the click not sure if the bolt was FUBAR to begin with as I never
> really torqued it hard :-(
>
> Well I'm taking off another day tomorrow to work on this and to get it
> right!
>
have over-torqued. Aluminum is not too forgiving for overtorqued bolts.
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1141778357.211010.71330@v46g2000cwv.googlegro ups.com...
> Thanks both. Sorry I dint continue the subject in my first post.
> That's what I new in my heart but could'nt bear to tell myself after
> working on this 7 hrs today and the bolt broke when I was torqueing
> everything up with a torque wrench. I had read 30 lbs but never heard
> the click not sure if the bolt was FUBAR to begin with as I never
> really torqued it hard :-(
>
> Well I'm taking off another day tomorrow to work on this and to get it
> right!
>
#18
Guest
Posts: n/a
Re: Broken Bolt
Yep, you already knew it. Take it off. :( Shouldn't take more than an
hour or so.
ufatbastehd wrote:
> Here is a pic of the broken bolt. Wondering if anyone every ran short a
> bolt like this.
>
>
> http://i50.photobucket.com/albums/f3...d/DSCN2422.jpg
>
hour or so.
ufatbastehd wrote:
> Here is a pic of the broken bolt. Wondering if anyone every ran short a
> bolt like this.
>
>
> http://i50.photobucket.com/albums/f3...d/DSCN2422.jpg
>
#19
Guest
Posts: n/a
Re: Broken Bolt
Yep, you already knew it. Take it off. :( Shouldn't take more than an
hour or so.
ufatbastehd wrote:
> Here is a pic of the broken bolt. Wondering if anyone every ran short a
> bolt like this.
>
>
> http://i50.photobucket.com/albums/f3...d/DSCN2422.jpg
>
hour or so.
ufatbastehd wrote:
> Here is a pic of the broken bolt. Wondering if anyone every ran short a
> bolt like this.
>
>
> http://i50.photobucket.com/albums/f3...d/DSCN2422.jpg
>
#20
Guest
Posts: n/a
Re: Broken Bolt
Yep, you already knew it. Take it off. :( Shouldn't take more than an
hour or so.
ufatbastehd wrote:
> Here is a pic of the broken bolt. Wondering if anyone every ran short a
> bolt like this.
>
>
> http://i50.photobucket.com/albums/f3...d/DSCN2422.jpg
>
hour or so.
ufatbastehd wrote:
> Here is a pic of the broken bolt. Wondering if anyone every ran short a
> bolt like this.
>
>
> http://i50.photobucket.com/albums/f3...d/DSCN2422.jpg
>