Brand new '89 YJ
Guest
Posts: n/a
Re: Brand new '89 YJ
Oops, I forgot to say the starter solenoid on those is on the fender,
you can clean it from up top easily.
Are those bent parts in the image?
Mike
The Merg wrote:
> Cool. I was planning on pulling the starter to clean it/look it over
> anyway. The whole engine bay is incredibly dirty, especially compared
> to how clean the body and frame is (aside from the rugs, which got
> yanked out).
>
> By the way, I'm still having trouble with the XJ Tcase shift linkage. I
> replaced the bushings, it shifts into 4H fine, but trying to get to 4L
> pops the bushing out and screws everything up again. Is it possible for
> 4L to be screwed up (e.g. the gearing) and still have 4H work fine? Or
> do I probably just need to replace the linkage completely?
>
> Here's the picture:
> http://s143.photobucket.com/albums/r...t=IMG_0308.jpg
>
>
>
> Mike Romain wrote:
>> That might mean the connection on the side post of the starter
>> solenoid is loose or dirty. That side wire send power to the coil
>> when the starter is turning.
>>
>> You can jumper the coil directly to the battery to see if it then
>> starts. If it does, it won't stop until you unhook that jumper wire.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>> The Merg wrote:
>>> Hey guys, I haven't had a chance to do much reading on the 4.2L yet,
>>> so I thought I'd ask you guys for a quick answer.
>>>
>>> We threw a battery in it, and voila, the starter does work, there's
>>> just no spark. The plugs are ugly, but would probably spark if there
>>> was any power to them. In the myriad trash that came out of this
>>> thing was a new distributor cap and rotor, so we put them on.
>>> I'm thinking it's the coil, but here's the situation: we put a timing
>>> light on the wire that runs from the coil to the cap and it doesn't
>>> have spark when the key is turned, but only when the key is released
>>> from 'start' - then it has a quick spark, but that's it.
>>> So - replace the coil? Or am I possibly looking at some ignition
>>> wiring problem?
>>> There are also a couple vacuum hoses disconnected and I'm clueless on
>>> carburetors, but that's another show.
>>>
>>> Carl S wrote:
>>>> So jealous.....
>>>>
>>>> Carl
>>>>
>>>>
>>>> "The Merg" <greg.mergner@gmail.com> wrote in message
>>>> news:1170474813.551448.46360@s48g2000cws.googlegro ups.com...
>>>>> Picked it up today - don't worry, I was able to get the Tcase in
>>>>> neutral this time.
>>>>>
>>>>> Here are the pictures: http://s143.photobucket.com/albums/r139/
>>>>> gmergner/89%20YJ/
>>>>>
>>>>> Needs a starter, battery, and something's up with the clutch - and I'm
>>>>> sure a whole lot of other things will present themselves before we're
>>>>> done.
>>>>>
>>>>
>>>>
you can clean it from up top easily.
Are those bent parts in the image?
Mike
The Merg wrote:
> Cool. I was planning on pulling the starter to clean it/look it over
> anyway. The whole engine bay is incredibly dirty, especially compared
> to how clean the body and frame is (aside from the rugs, which got
> yanked out).
>
> By the way, I'm still having trouble with the XJ Tcase shift linkage. I
> replaced the bushings, it shifts into 4H fine, but trying to get to 4L
> pops the bushing out and screws everything up again. Is it possible for
> 4L to be screwed up (e.g. the gearing) and still have 4H work fine? Or
> do I probably just need to replace the linkage completely?
>
> Here's the picture:
> http://s143.photobucket.com/albums/r...t=IMG_0308.jpg
>
>
>
> Mike Romain wrote:
>> That might mean the connection on the side post of the starter
>> solenoid is loose or dirty. That side wire send power to the coil
>> when the starter is turning.
>>
>> You can jumper the coil directly to the battery to see if it then
>> starts. If it does, it won't stop until you unhook that jumper wire.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>>
>> The Merg wrote:
>>> Hey guys, I haven't had a chance to do much reading on the 4.2L yet,
>>> so I thought I'd ask you guys for a quick answer.
>>>
>>> We threw a battery in it, and voila, the starter does work, there's
>>> just no spark. The plugs are ugly, but would probably spark if there
>>> was any power to them. In the myriad trash that came out of this
>>> thing was a new distributor cap and rotor, so we put them on.
>>> I'm thinking it's the coil, but here's the situation: we put a timing
>>> light on the wire that runs from the coil to the cap and it doesn't
>>> have spark when the key is turned, but only when the key is released
>>> from 'start' - then it has a quick spark, but that's it.
>>> So - replace the coil? Or am I possibly looking at some ignition
>>> wiring problem?
>>> There are also a couple vacuum hoses disconnected and I'm clueless on
>>> carburetors, but that's another show.
>>>
>>> Carl S wrote:
>>>> So jealous.....
>>>>
>>>> Carl
>>>>
>>>>
>>>> "The Merg" <greg.mergner@gmail.com> wrote in message
>>>> news:1170474813.551448.46360@s48g2000cws.googlegro ups.com...
>>>>> Picked it up today - don't worry, I was able to get the Tcase in
>>>>> neutral this time.
>>>>>
>>>>> Here are the pictures: http://s143.photobucket.com/albums/r139/
>>>>> gmergner/89%20YJ/
>>>>>
>>>>> Needs a starter, battery, and something's up with the clutch - and I'm
>>>>> sure a whole lot of other things will present themselves before we're
>>>>> done.
>>>>>
>>>>
>>>>
Guest
Posts: n/a
Re: Brand new '89 YJ
Not bent, just pretty out-of-whack because of the linkage not sitting in
its proper spot. Also, I'm pretty sure the t-case was dropped a few
inches in that picture.
Mike Romain wrote:
> Oops, I forgot to say the starter solenoid on those is on the fender,
> you can clean it from up top easily.
>
> Are those bent parts in the image?
>
> Mike
>
its proper spot. Also, I'm pretty sure the t-case was dropped a few
inches in that picture.
Mike Romain wrote:
> Oops, I forgot to say the starter solenoid on those is on the fender,
> you can clean it from up top easily.
>
> Are those bent parts in the image?
>
> Mike
>
Guest
Posts: n/a
Re: Brand new '89 YJ
Not bent, just pretty out-of-whack because of the linkage not sitting in
its proper spot. Also, I'm pretty sure the t-case was dropped a few
inches in that picture.
Mike Romain wrote:
> Oops, I forgot to say the starter solenoid on those is on the fender,
> you can clean it from up top easily.
>
> Are those bent parts in the image?
>
> Mike
>
its proper spot. Also, I'm pretty sure the t-case was dropped a few
inches in that picture.
Mike Romain wrote:
> Oops, I forgot to say the starter solenoid on those is on the fender,
> you can clean it from up top easily.
>
> Are those bent parts in the image?
>
> Mike
>
Guest
Posts: n/a
Re: Brand new '89 YJ
Not bent, just pretty out-of-whack because of the linkage not sitting in
its proper spot. Also, I'm pretty sure the t-case was dropped a few
inches in that picture.
Mike Romain wrote:
> Oops, I forgot to say the starter solenoid on those is on the fender,
> you can clean it from up top easily.
>
> Are those bent parts in the image?
>
> Mike
>
its proper spot. Also, I'm pretty sure the t-case was dropped a few
inches in that picture.
Mike Romain wrote:
> Oops, I forgot to say the starter solenoid on those is on the fender,
> you can clean it from up top easily.
>
> Are those bent parts in the image?
>
> Mike
>
Guest
Posts: n/a
Re: Brand new '89 YJ
Not bent, just pretty out-of-whack because of the linkage not sitting in
its proper spot. Also, I'm pretty sure the t-case was dropped a few
inches in that picture.
Mike Romain wrote:
> Oops, I forgot to say the starter solenoid on those is on the fender,
> you can clean it from up top easily.
>
> Are those bent parts in the image?
>
> Mike
>
its proper spot. Also, I'm pretty sure the t-case was dropped a few
inches in that picture.
Mike Romain wrote:
> Oops, I forgot to say the starter solenoid on those is on the fender,
> you can clean it from up top easily.
>
> Are those bent parts in the image?
>
> Mike
>
Guest
Posts: n/a
Re: Brand new '89 YJ
I cleaned the solenoid, it was pretty crudded up so I was hoping that
was it, but no dice.
Where on the coil do I hook the jumper wire?
Mike Romain wrote:
> That might mean the connection on the side post of the starter solenoid
> is loose or dirty. That side wire send power to the coil when the
> starter is turning.
>
> You can jumper the coil directly to the battery to see if it then
> starts. If it does, it won't stop until you unhook that jumper wire.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
was it, but no dice.
Where on the coil do I hook the jumper wire?
Mike Romain wrote:
> That might mean the connection on the side post of the starter solenoid
> is loose or dirty. That side wire send power to the coil when the
> starter is turning.
>
> You can jumper the coil directly to the battery to see if it then
> starts. If it does, it won't stop until you unhook that jumper wire.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
Guest
Posts: n/a
Re: Brand new '89 YJ
I cleaned the solenoid, it was pretty crudded up so I was hoping that
was it, but no dice.
Where on the coil do I hook the jumper wire?
Mike Romain wrote:
> That might mean the connection on the side post of the starter solenoid
> is loose or dirty. That side wire send power to the coil when the
> starter is turning.
>
> You can jumper the coil directly to the battery to see if it then
> starts. If it does, it won't stop until you unhook that jumper wire.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
was it, but no dice.
Where on the coil do I hook the jumper wire?
Mike Romain wrote:
> That might mean the connection on the side post of the starter solenoid
> is loose or dirty. That side wire send power to the coil when the
> starter is turning.
>
> You can jumper the coil directly to the battery to see if it then
> starts. If it does, it won't stop until you unhook that jumper wire.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
Guest
Posts: n/a
Re: Brand new '89 YJ
I cleaned the solenoid, it was pretty crudded up so I was hoping that
was it, but no dice.
Where on the coil do I hook the jumper wire?
Mike Romain wrote:
> That might mean the connection on the side post of the starter solenoid
> is loose or dirty. That side wire send power to the coil when the
> starter is turning.
>
> You can jumper the coil directly to the battery to see if it then
> starts. If it does, it won't stop until you unhook that jumper wire.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
was it, but no dice.
Where on the coil do I hook the jumper wire?
Mike Romain wrote:
> That might mean the connection on the side post of the starter solenoid
> is loose or dirty. That side wire send power to the coil when the
> starter is turning.
>
> You can jumper the coil directly to the battery to see if it then
> starts. If it does, it won't stop until you unhook that jumper wire.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
Guest
Posts: n/a
Re: Brand new '89 YJ
I cleaned the solenoid, it was pretty crudded up so I was hoping that
was it, but no dice.
Where on the coil do I hook the jumper wire?
Mike Romain wrote:
> That might mean the connection on the side post of the starter solenoid
> is loose or dirty. That side wire send power to the coil when the
> starter is turning.
>
> You can jumper the coil directly to the battery to see if it then
> starts. If it does, it won't stop until you unhook that jumper wire.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
was it, but no dice.
Where on the coil do I hook the jumper wire?
Mike Romain wrote:
> That might mean the connection on the side post of the starter solenoid
> is loose or dirty. That side wire send power to the coil when the
> starter is turning.
>
> You can jumper the coil directly to the battery to see if it then
> starts. If it does, it won't stop until you unhook that jumper wire.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
Guest
Posts: n/a
Re: Brand new '89 YJ
If the engine will fire off with the starter engaged but then dies with
no spark when you release the key points to a problem with the coil
resistance wire. The coil is fed full 12 volts when starting, a few less
volts while running. Check by turing on the ignition, see if you have 12
volts at one or both of the coil terminals, if voltage then you have a
different problem. If no voltage, try it with the starter engaged, if
voltage, you have a bad ignition switch or bad resistor wire.
The Merg wrote:
> Hey guys, I haven't had a chance to do much reading on the 4.2L yet, so
> I thought I'd ask you guys for a quick answer.
>
> We threw a battery in it, and voila, the starter does work, there's just
> no spark. The plugs are ugly, but would probably spark if there was any
> power to them. In the myriad trash that came out of this thing was a
> new distributor cap and rotor, so we put them on.
> I'm thinking it's the coil, but here's the situation: we put a timing
> light on the wire that runs from the coil to the cap and it doesn't have
> spark when the key is turned, but only when the key is released from
> 'start' - then it has a quick spark, but that's it.
> So - replace the coil? Or am I possibly looking at some ignition wiring
> problem?
> There are also a couple vacuum hoses disconnected and I'm clueless on
> carburetors, but that's another show.
>
> Carl S wrote:
>
>> So jealous.....
>>
>> Carl
>>
>>
>> "The Merg" <greg.mergner@gmail.com> wrote in message
>> news:1170474813.551448.46360@s48g2000cws.googlegro ups.com...
>>
>>> Picked it up today - don't worry, I was able to get the Tcase in
>>> neutral this time.
>>>
>>> Here are the pictures: http://s143.photobucket.com/albums/r139/
>>> gmergner/89%20YJ/
>>>
>>> Needs a starter, battery, and something's up with the clutch - and I'm
>>> sure a whole lot of other things will present themselves before we're
>>> done.
>>>
>>
>>
no spark when you release the key points to a problem with the coil
resistance wire. The coil is fed full 12 volts when starting, a few less
volts while running. Check by turing on the ignition, see if you have 12
volts at one or both of the coil terminals, if voltage then you have a
different problem. If no voltage, try it with the starter engaged, if
voltage, you have a bad ignition switch or bad resistor wire.
The Merg wrote:
> Hey guys, I haven't had a chance to do much reading on the 4.2L yet, so
> I thought I'd ask you guys for a quick answer.
>
> We threw a battery in it, and voila, the starter does work, there's just
> no spark. The plugs are ugly, but would probably spark if there was any
> power to them. In the myriad trash that came out of this thing was a
> new distributor cap and rotor, so we put them on.
> I'm thinking it's the coil, but here's the situation: we put a timing
> light on the wire that runs from the coil to the cap and it doesn't have
> spark when the key is turned, but only when the key is released from
> 'start' - then it has a quick spark, but that's it.
> So - replace the coil? Or am I possibly looking at some ignition wiring
> problem?
> There are also a couple vacuum hoses disconnected and I'm clueless on
> carburetors, but that's another show.
>
> Carl S wrote:
>
>> So jealous.....
>>
>> Carl
>>
>>
>> "The Merg" <greg.mergner@gmail.com> wrote in message
>> news:1170474813.551448.46360@s48g2000cws.googlegro ups.com...
>>
>>> Picked it up today - don't worry, I was able to get the Tcase in
>>> neutral this time.
>>>
>>> Here are the pictures: http://s143.photobucket.com/albums/r139/
>>> gmergner/89%20YJ/
>>>
>>> Needs a starter, battery, and something's up with the clutch - and I'm
>>> sure a whole lot of other things will present themselves before we're
>>> done.
>>>
>>
>>