Brand new '89 YJ
#131
Guest
Posts: n/a
Re: Brand new '89 YJ
Bruce,
I can't seem to find a website for Belden. Do you know where I can
find some info or where I would be able to pick them up?
Thanks a lot.
On Feb 8, 10:34 am, "Highcountry" <highcountry2...@hotmail.com> wrote:
> Mike you are "one of the few"! Mercy, the parts situation is going
> to the dogs, or at least the Chinese!
>
> I also put an Accel coil on my CJ, not sure which one but it fits in
> the standard bracket and has a Resin Core instead of oil to resist
> vibration. It gave a noticable smoothness to the idle.
>
> If you are REALLY insistant, you can still get a good Cap and Rotor.
> Borg Warner still has available the good cap with the BRASS terminals
> and a decent rotor. You will most likely need to ASK for the BEST
> stuff to get it, everyone quotes prices on the Chinese Junk to keep
> from scaring off the "Bubba Mechanics".
>
> Wires are even harder to find. The only ones I can recommend are the
> Belden brand, and make sure that when you open the box they are a Deep
> Navy Blue in color. These are the good ones and you won't have any
> problems with them. Belden makes wires for NASCAR, so they do know
> what is necessary to make a good wire.
>
> Good Luck, Bruce
I can't seem to find a website for Belden. Do you know where I can
find some info or where I would be able to pick them up?
Thanks a lot.
On Feb 8, 10:34 am, "Highcountry" <highcountry2...@hotmail.com> wrote:
> Mike you are "one of the few"! Mercy, the parts situation is going
> to the dogs, or at least the Chinese!
>
> I also put an Accel coil on my CJ, not sure which one but it fits in
> the standard bracket and has a Resin Core instead of oil to resist
> vibration. It gave a noticable smoothness to the idle.
>
> If you are REALLY insistant, you can still get a good Cap and Rotor.
> Borg Warner still has available the good cap with the BRASS terminals
> and a decent rotor. You will most likely need to ASK for the BEST
> stuff to get it, everyone quotes prices on the Chinese Junk to keep
> from scaring off the "Bubba Mechanics".
>
> Wires are even harder to find. The only ones I can recommend are the
> Belden brand, and make sure that when you open the box they are a Deep
> Navy Blue in color. These are the good ones and you won't have any
> problems with them. Belden makes wires for NASCAR, so they do know
> what is necessary to make a good wire.
>
> Good Luck, Bruce
#132
Guest
Posts: n/a
Re: Brand new '89 YJ
Bruce,
I can't seem to find a website for Belden. Do you know where I can
find some info or where I would be able to pick them up?
Thanks a lot.
On Feb 8, 10:34 am, "Highcountry" <highcountry2...@hotmail.com> wrote:
> Mike you are "one of the few"! Mercy, the parts situation is going
> to the dogs, or at least the Chinese!
>
> I also put an Accel coil on my CJ, not sure which one but it fits in
> the standard bracket and has a Resin Core instead of oil to resist
> vibration. It gave a noticable smoothness to the idle.
>
> If you are REALLY insistant, you can still get a good Cap and Rotor.
> Borg Warner still has available the good cap with the BRASS terminals
> and a decent rotor. You will most likely need to ASK for the BEST
> stuff to get it, everyone quotes prices on the Chinese Junk to keep
> from scaring off the "Bubba Mechanics".
>
> Wires are even harder to find. The only ones I can recommend are the
> Belden brand, and make sure that when you open the box they are a Deep
> Navy Blue in color. These are the good ones and you won't have any
> problems with them. Belden makes wires for NASCAR, so they do know
> what is necessary to make a good wire.
>
> Good Luck, Bruce
I can't seem to find a website for Belden. Do you know where I can
find some info or where I would be able to pick them up?
Thanks a lot.
On Feb 8, 10:34 am, "Highcountry" <highcountry2...@hotmail.com> wrote:
> Mike you are "one of the few"! Mercy, the parts situation is going
> to the dogs, or at least the Chinese!
>
> I also put an Accel coil on my CJ, not sure which one but it fits in
> the standard bracket and has a Resin Core instead of oil to resist
> vibration. It gave a noticable smoothness to the idle.
>
> If you are REALLY insistant, you can still get a good Cap and Rotor.
> Borg Warner still has available the good cap with the BRASS terminals
> and a decent rotor. You will most likely need to ASK for the BEST
> stuff to get it, everyone quotes prices on the Chinese Junk to keep
> from scaring off the "Bubba Mechanics".
>
> Wires are even harder to find. The only ones I can recommend are the
> Belden brand, and make sure that when you open the box they are a Deep
> Navy Blue in color. These are the good ones and you won't have any
> problems with them. Belden makes wires for NASCAR, so they do know
> what is necessary to make a good wire.
>
> Good Luck, Bruce
#133
Guest
Posts: n/a
Re: Brand new '89 YJ
Bruce,
I can't seem to find a website for Belden. Do you know where I can
find some info or where I would be able to pick them up?
Thanks a lot.
On Feb 8, 10:34 am, "Highcountry" <highcountry2...@hotmail.com> wrote:
> Mike you are "one of the few"! Mercy, the parts situation is going
> to the dogs, or at least the Chinese!
>
> I also put an Accel coil on my CJ, not sure which one but it fits in
> the standard bracket and has a Resin Core instead of oil to resist
> vibration. It gave a noticable smoothness to the idle.
>
> If you are REALLY insistant, you can still get a good Cap and Rotor.
> Borg Warner still has available the good cap with the BRASS terminals
> and a decent rotor. You will most likely need to ASK for the BEST
> stuff to get it, everyone quotes prices on the Chinese Junk to keep
> from scaring off the "Bubba Mechanics".
>
> Wires are even harder to find. The only ones I can recommend are the
> Belden brand, and make sure that when you open the box they are a Deep
> Navy Blue in color. These are the good ones and you won't have any
> problems with them. Belden makes wires for NASCAR, so they do know
> what is necessary to make a good wire.
>
> Good Luck, Bruce
I can't seem to find a website for Belden. Do you know where I can
find some info or where I would be able to pick them up?
Thanks a lot.
On Feb 8, 10:34 am, "Highcountry" <highcountry2...@hotmail.com> wrote:
> Mike you are "one of the few"! Mercy, the parts situation is going
> to the dogs, or at least the Chinese!
>
> I also put an Accel coil on my CJ, not sure which one but it fits in
> the standard bracket and has a Resin Core instead of oil to resist
> vibration. It gave a noticable smoothness to the idle.
>
> If you are REALLY insistant, you can still get a good Cap and Rotor.
> Borg Warner still has available the good cap with the BRASS terminals
> and a decent rotor. You will most likely need to ASK for the BEST
> stuff to get it, everyone quotes prices on the Chinese Junk to keep
> from scaring off the "Bubba Mechanics".
>
> Wires are even harder to find. The only ones I can recommend are the
> Belden brand, and make sure that when you open the box they are a Deep
> Navy Blue in color. These are the good ones and you won't have any
> problems with them. Belden makes wires for NASCAR, so they do know
> what is necessary to make a good wire.
>
> Good Luck, Bruce
#134
Guest
Posts: n/a
Re: Brand new '89 YJ
NAPA carries Belden. Belden is owned by Federal-Mogul.
http://www.napapartsfromfederalmogul.com/belden/
http://www.federal-mogul.com/en/Afte...viceSolutions/
Chris
The Merg wrote:
> Bruce,
> I can't seem to find a website for Belden. Do you know where I can
> find some info or where I would be able to pick them up?
> Thanks a lot.
>
> On Feb 8, 10:34 am, "Highcountry" <highcountry2...@hotmail.com> wrote:
>> Mike you are "one of the few"! Mercy, the parts situation is going
>> to the dogs, or at least the Chinese!
>>
>> I also put an Accel coil on my CJ, not sure which one but it fits in
>> the standard bracket and has a Resin Core instead of oil to resist
>> vibration. It gave a noticable smoothness to the idle.
>>
>> If you are REALLY insistant, you can still get a good Cap and Rotor.
>> Borg Warner still has available the good cap with the BRASS terminals
>> and a decent rotor. You will most likely need to ASK for the BEST
>> stuff to get it, everyone quotes prices on the Chinese Junk to keep
>> from scaring off the "Bubba Mechanics".
>>
>> Wires are even harder to find. The only ones I can recommend are the
>> Belden brand, and make sure that when you open the box they are a Deep
>> Navy Blue in color. These are the good ones and you won't have any
>> problems with them. Belden makes wires for NASCAR, so they do know
>> what is necessary to make a good wire.
>>
>> Good Luck, Bruce
>
>
http://www.napapartsfromfederalmogul.com/belden/
http://www.federal-mogul.com/en/Afte...viceSolutions/
Chris
The Merg wrote:
> Bruce,
> I can't seem to find a website for Belden. Do you know where I can
> find some info or where I would be able to pick them up?
> Thanks a lot.
>
> On Feb 8, 10:34 am, "Highcountry" <highcountry2...@hotmail.com> wrote:
>> Mike you are "one of the few"! Mercy, the parts situation is going
>> to the dogs, or at least the Chinese!
>>
>> I also put an Accel coil on my CJ, not sure which one but it fits in
>> the standard bracket and has a Resin Core instead of oil to resist
>> vibration. It gave a noticable smoothness to the idle.
>>
>> If you are REALLY insistant, you can still get a good Cap and Rotor.
>> Borg Warner still has available the good cap with the BRASS terminals
>> and a decent rotor. You will most likely need to ASK for the BEST
>> stuff to get it, everyone quotes prices on the Chinese Junk to keep
>> from scaring off the "Bubba Mechanics".
>>
>> Wires are even harder to find. The only ones I can recommend are the
>> Belden brand, and make sure that when you open the box they are a Deep
>> Navy Blue in color. These are the good ones and you won't have any
>> problems with them. Belden makes wires for NASCAR, so they do know
>> what is necessary to make a good wire.
>>
>> Good Luck, Bruce
>
>
#135
Guest
Posts: n/a
Re: Brand new '89 YJ
NAPA carries Belden. Belden is owned by Federal-Mogul.
http://www.napapartsfromfederalmogul.com/belden/
http://www.federal-mogul.com/en/Afte...viceSolutions/
Chris
The Merg wrote:
> Bruce,
> I can't seem to find a website for Belden. Do you know where I can
> find some info or where I would be able to pick them up?
> Thanks a lot.
>
> On Feb 8, 10:34 am, "Highcountry" <highcountry2...@hotmail.com> wrote:
>> Mike you are "one of the few"! Mercy, the parts situation is going
>> to the dogs, or at least the Chinese!
>>
>> I also put an Accel coil on my CJ, not sure which one but it fits in
>> the standard bracket and has a Resin Core instead of oil to resist
>> vibration. It gave a noticable smoothness to the idle.
>>
>> If you are REALLY insistant, you can still get a good Cap and Rotor.
>> Borg Warner still has available the good cap with the BRASS terminals
>> and a decent rotor. You will most likely need to ASK for the BEST
>> stuff to get it, everyone quotes prices on the Chinese Junk to keep
>> from scaring off the "Bubba Mechanics".
>>
>> Wires are even harder to find. The only ones I can recommend are the
>> Belden brand, and make sure that when you open the box they are a Deep
>> Navy Blue in color. These are the good ones and you won't have any
>> problems with them. Belden makes wires for NASCAR, so they do know
>> what is necessary to make a good wire.
>>
>> Good Luck, Bruce
>
>
http://www.napapartsfromfederalmogul.com/belden/
http://www.federal-mogul.com/en/Afte...viceSolutions/
Chris
The Merg wrote:
> Bruce,
> I can't seem to find a website for Belden. Do you know where I can
> find some info or where I would be able to pick them up?
> Thanks a lot.
>
> On Feb 8, 10:34 am, "Highcountry" <highcountry2...@hotmail.com> wrote:
>> Mike you are "one of the few"! Mercy, the parts situation is going
>> to the dogs, or at least the Chinese!
>>
>> I also put an Accel coil on my CJ, not sure which one but it fits in
>> the standard bracket and has a Resin Core instead of oil to resist
>> vibration. It gave a noticable smoothness to the idle.
>>
>> If you are REALLY insistant, you can still get a good Cap and Rotor.
>> Borg Warner still has available the good cap with the BRASS terminals
>> and a decent rotor. You will most likely need to ASK for the BEST
>> stuff to get it, everyone quotes prices on the Chinese Junk to keep
>> from scaring off the "Bubba Mechanics".
>>
>> Wires are even harder to find. The only ones I can recommend are the
>> Belden brand, and make sure that when you open the box they are a Deep
>> Navy Blue in color. These are the good ones and you won't have any
>> problems with them. Belden makes wires for NASCAR, so they do know
>> what is necessary to make a good wire.
>>
>> Good Luck, Bruce
>
>
#136
Guest
Posts: n/a
Re: Brand new '89 YJ
NAPA carries Belden. Belden is owned by Federal-Mogul.
http://www.napapartsfromfederalmogul.com/belden/
http://www.federal-mogul.com/en/Afte...viceSolutions/
Chris
The Merg wrote:
> Bruce,
> I can't seem to find a website for Belden. Do you know where I can
> find some info or where I would be able to pick them up?
> Thanks a lot.
>
> On Feb 8, 10:34 am, "Highcountry" <highcountry2...@hotmail.com> wrote:
>> Mike you are "one of the few"! Mercy, the parts situation is going
>> to the dogs, or at least the Chinese!
>>
>> I also put an Accel coil on my CJ, not sure which one but it fits in
>> the standard bracket and has a Resin Core instead of oil to resist
>> vibration. It gave a noticable smoothness to the idle.
>>
>> If you are REALLY insistant, you can still get a good Cap and Rotor.
>> Borg Warner still has available the good cap with the BRASS terminals
>> and a decent rotor. You will most likely need to ASK for the BEST
>> stuff to get it, everyone quotes prices on the Chinese Junk to keep
>> from scaring off the "Bubba Mechanics".
>>
>> Wires are even harder to find. The only ones I can recommend are the
>> Belden brand, and make sure that when you open the box they are a Deep
>> Navy Blue in color. These are the good ones and you won't have any
>> problems with them. Belden makes wires for NASCAR, so they do know
>> what is necessary to make a good wire.
>>
>> Good Luck, Bruce
>
>
http://www.napapartsfromfederalmogul.com/belden/
http://www.federal-mogul.com/en/Afte...viceSolutions/
Chris
The Merg wrote:
> Bruce,
> I can't seem to find a website for Belden. Do you know where I can
> find some info or where I would be able to pick them up?
> Thanks a lot.
>
> On Feb 8, 10:34 am, "Highcountry" <highcountry2...@hotmail.com> wrote:
>> Mike you are "one of the few"! Mercy, the parts situation is going
>> to the dogs, or at least the Chinese!
>>
>> I also put an Accel coil on my CJ, not sure which one but it fits in
>> the standard bracket and has a Resin Core instead of oil to resist
>> vibration. It gave a noticable smoothness to the idle.
>>
>> If you are REALLY insistant, you can still get a good Cap and Rotor.
>> Borg Warner still has available the good cap with the BRASS terminals
>> and a decent rotor. You will most likely need to ASK for the BEST
>> stuff to get it, everyone quotes prices on the Chinese Junk to keep
>> from scaring off the "Bubba Mechanics".
>>
>> Wires are even harder to find. The only ones I can recommend are the
>> Belden brand, and make sure that when you open the box they are a Deep
>> Navy Blue in color. These are the good ones and you won't have any
>> problems with them. Belden makes wires for NASCAR, so they do know
>> what is necessary to make a good wire.
>>
>> Good Luck, Bruce
>
>
#137
Guest
Posts: n/a
Re: Brand new '89 YJ
NAPA carries Belden. Belden is owned by Federal-Mogul.
http://www.napapartsfromfederalmogul.com/belden/
http://www.federal-mogul.com/en/Afte...viceSolutions/
Chris
The Merg wrote:
> Bruce,
> I can't seem to find a website for Belden. Do you know where I can
> find some info or where I would be able to pick them up?
> Thanks a lot.
>
> On Feb 8, 10:34 am, "Highcountry" <highcountry2...@hotmail.com> wrote:
>> Mike you are "one of the few"! Mercy, the parts situation is going
>> to the dogs, or at least the Chinese!
>>
>> I also put an Accel coil on my CJ, not sure which one but it fits in
>> the standard bracket and has a Resin Core instead of oil to resist
>> vibration. It gave a noticable smoothness to the idle.
>>
>> If you are REALLY insistant, you can still get a good Cap and Rotor.
>> Borg Warner still has available the good cap with the BRASS terminals
>> and a decent rotor. You will most likely need to ASK for the BEST
>> stuff to get it, everyone quotes prices on the Chinese Junk to keep
>> from scaring off the "Bubba Mechanics".
>>
>> Wires are even harder to find. The only ones I can recommend are the
>> Belden brand, and make sure that when you open the box they are a Deep
>> Navy Blue in color. These are the good ones and you won't have any
>> problems with them. Belden makes wires for NASCAR, so they do know
>> what is necessary to make a good wire.
>>
>> Good Luck, Bruce
>
>
http://www.napapartsfromfederalmogul.com/belden/
http://www.federal-mogul.com/en/Afte...viceSolutions/
Chris
The Merg wrote:
> Bruce,
> I can't seem to find a website for Belden. Do you know where I can
> find some info or where I would be able to pick them up?
> Thanks a lot.
>
> On Feb 8, 10:34 am, "Highcountry" <highcountry2...@hotmail.com> wrote:
>> Mike you are "one of the few"! Mercy, the parts situation is going
>> to the dogs, or at least the Chinese!
>>
>> I also put an Accel coil on my CJ, not sure which one but it fits in
>> the standard bracket and has a Resin Core instead of oil to resist
>> vibration. It gave a noticable smoothness to the idle.
>>
>> If you are REALLY insistant, you can still get a good Cap and Rotor.
>> Borg Warner still has available the good cap with the BRASS terminals
>> and a decent rotor. You will most likely need to ASK for the BEST
>> stuff to get it, everyone quotes prices on the Chinese Junk to keep
>> from scaring off the "Bubba Mechanics".
>>
>> Wires are even harder to find. The only ones I can recommend are the
>> Belden brand, and make sure that when you open the box they are a Deep
>> Navy Blue in color. These are the good ones and you won't have any
>> problems with them. Belden makes wires for NASCAR, so they do know
>> what is necessary to make a good wire.
>>
>> Good Luck, Bruce
>
>
#138
Guest
Posts: n/a
Re: Brand new '89 YJ
I think I have tried every aftermarket 'performance' wire set made in
the last 35 years or so and none have performed or stood up as well as
the OEM ones from the $tealership.
I am now running on 7 years with the OEM Jeep plug wires in my CJ7.
'Performance' just means they will put out a nice clean spark... while
they work.
They are designed to work for at least 'one' race.....
Like a 'performance' engine. Race cars change those every race or two
also....
Accel wire are supposed to be 9mm 'performance' wires. Well they worked
until I had to check my spark plugs, then every metal clip on the ends
pulled off when I removed them. Half were arced out already which meant
they were broken to start and had been jumping that gap since new.
Belden make cables. They are twice the price of the same cable from any
competetitor just because of their name stamped in pure gold on the side
of the cable. (it must be pure gold, nothing else justifies their price)
Just my $0.02....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
The Merg wrote:
> Bruce,
> I can't seem to find a website for Belden. Do you know where I can
> find some info or where I would be able to pick them up?
> Thanks a lot.
>
> On Feb 8, 10:34 am, "Highcountry" <highcountry2...@hotmail.com> wrote:
>> Mike you are "one of the few"! Mercy, the parts situation is going
>> to the dogs, or at least the Chinese!
>>
>> I also put an Accel coil on my CJ, not sure which one but it fits in
>> the standard bracket and has a Resin Core instead of oil to resist
>> vibration. It gave a noticable smoothness to the idle.
>>
>> If you are REALLY insistant, you can still get a good Cap and Rotor.
>> Borg Warner still has available the good cap with the BRASS terminals
>> and a decent rotor. You will most likely need to ASK for the BEST
>> stuff to get it, everyone quotes prices on the Chinese Junk to keep
>> from scaring off the "Bubba Mechanics".
>>
>> Wires are even harder to find. The only ones I can recommend are the
>> Belden brand, and make sure that when you open the box they are a Deep
>> Navy Blue in color. These are the good ones and you won't have any
>> problems with them. Belden makes wires for NASCAR, so they do know
>> what is necessary to make a good wire.
>>
>> Good Luck, Bruce
>
>
the last 35 years or so and none have performed or stood up as well as
the OEM ones from the $tealership.
I am now running on 7 years with the OEM Jeep plug wires in my CJ7.
'Performance' just means they will put out a nice clean spark... while
they work.
They are designed to work for at least 'one' race.....
Like a 'performance' engine. Race cars change those every race or two
also....
Accel wire are supposed to be 9mm 'performance' wires. Well they worked
until I had to check my spark plugs, then every metal clip on the ends
pulled off when I removed them. Half were arced out already which meant
they were broken to start and had been jumping that gap since new.
Belden make cables. They are twice the price of the same cable from any
competetitor just because of their name stamped in pure gold on the side
of the cable. (it must be pure gold, nothing else justifies their price)
Just my $0.02....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
The Merg wrote:
> Bruce,
> I can't seem to find a website for Belden. Do you know where I can
> find some info or where I would be able to pick them up?
> Thanks a lot.
>
> On Feb 8, 10:34 am, "Highcountry" <highcountry2...@hotmail.com> wrote:
>> Mike you are "one of the few"! Mercy, the parts situation is going
>> to the dogs, or at least the Chinese!
>>
>> I also put an Accel coil on my CJ, not sure which one but it fits in
>> the standard bracket and has a Resin Core instead of oil to resist
>> vibration. It gave a noticable smoothness to the idle.
>>
>> If you are REALLY insistant, you can still get a good Cap and Rotor.
>> Borg Warner still has available the good cap with the BRASS terminals
>> and a decent rotor. You will most likely need to ASK for the BEST
>> stuff to get it, everyone quotes prices on the Chinese Junk to keep
>> from scaring off the "Bubba Mechanics".
>>
>> Wires are even harder to find. The only ones I can recommend are the
>> Belden brand, and make sure that when you open the box they are a Deep
>> Navy Blue in color. These are the good ones and you won't have any
>> problems with them. Belden makes wires for NASCAR, so they do know
>> what is necessary to make a good wire.
>>
>> Good Luck, Bruce
>
>
#139
Guest
Posts: n/a
Re: Brand new '89 YJ
I think I have tried every aftermarket 'performance' wire set made in
the last 35 years or so and none have performed or stood up as well as
the OEM ones from the $tealership.
I am now running on 7 years with the OEM Jeep plug wires in my CJ7.
'Performance' just means they will put out a nice clean spark... while
they work.
They are designed to work for at least 'one' race.....
Like a 'performance' engine. Race cars change those every race or two
also....
Accel wire are supposed to be 9mm 'performance' wires. Well they worked
until I had to check my spark plugs, then every metal clip on the ends
pulled off when I removed them. Half were arced out already which meant
they were broken to start and had been jumping that gap since new.
Belden make cables. They are twice the price of the same cable from any
competetitor just because of their name stamped in pure gold on the side
of the cable. (it must be pure gold, nothing else justifies their price)
Just my $0.02....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
The Merg wrote:
> Bruce,
> I can't seem to find a website for Belden. Do you know where I can
> find some info or where I would be able to pick them up?
> Thanks a lot.
>
> On Feb 8, 10:34 am, "Highcountry" <highcountry2...@hotmail.com> wrote:
>> Mike you are "one of the few"! Mercy, the parts situation is going
>> to the dogs, or at least the Chinese!
>>
>> I also put an Accel coil on my CJ, not sure which one but it fits in
>> the standard bracket and has a Resin Core instead of oil to resist
>> vibration. It gave a noticable smoothness to the idle.
>>
>> If you are REALLY insistant, you can still get a good Cap and Rotor.
>> Borg Warner still has available the good cap with the BRASS terminals
>> and a decent rotor. You will most likely need to ASK for the BEST
>> stuff to get it, everyone quotes prices on the Chinese Junk to keep
>> from scaring off the "Bubba Mechanics".
>>
>> Wires are even harder to find. The only ones I can recommend are the
>> Belden brand, and make sure that when you open the box they are a Deep
>> Navy Blue in color. These are the good ones and you won't have any
>> problems with them. Belden makes wires for NASCAR, so they do know
>> what is necessary to make a good wire.
>>
>> Good Luck, Bruce
>
>
the last 35 years or so and none have performed or stood up as well as
the OEM ones from the $tealership.
I am now running on 7 years with the OEM Jeep plug wires in my CJ7.
'Performance' just means they will put out a nice clean spark... while
they work.
They are designed to work for at least 'one' race.....
Like a 'performance' engine. Race cars change those every race or two
also....
Accel wire are supposed to be 9mm 'performance' wires. Well they worked
until I had to check my spark plugs, then every metal clip on the ends
pulled off when I removed them. Half were arced out already which meant
they were broken to start and had been jumping that gap since new.
Belden make cables. They are twice the price of the same cable from any
competetitor just because of their name stamped in pure gold on the side
of the cable. (it must be pure gold, nothing else justifies their price)
Just my $0.02....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
The Merg wrote:
> Bruce,
> I can't seem to find a website for Belden. Do you know where I can
> find some info or where I would be able to pick them up?
> Thanks a lot.
>
> On Feb 8, 10:34 am, "Highcountry" <highcountry2...@hotmail.com> wrote:
>> Mike you are "one of the few"! Mercy, the parts situation is going
>> to the dogs, or at least the Chinese!
>>
>> I also put an Accel coil on my CJ, not sure which one but it fits in
>> the standard bracket and has a Resin Core instead of oil to resist
>> vibration. It gave a noticable smoothness to the idle.
>>
>> If you are REALLY insistant, you can still get a good Cap and Rotor.
>> Borg Warner still has available the good cap with the BRASS terminals
>> and a decent rotor. You will most likely need to ASK for the BEST
>> stuff to get it, everyone quotes prices on the Chinese Junk to keep
>> from scaring off the "Bubba Mechanics".
>>
>> Wires are even harder to find. The only ones I can recommend are the
>> Belden brand, and make sure that when you open the box they are a Deep
>> Navy Blue in color. These are the good ones and you won't have any
>> problems with them. Belden makes wires for NASCAR, so they do know
>> what is necessary to make a good wire.
>>
>> Good Luck, Bruce
>
>
#140
Guest
Posts: n/a
Re: Brand new '89 YJ
I think I have tried every aftermarket 'performance' wire set made in
the last 35 years or so and none have performed or stood up as well as
the OEM ones from the $tealership.
I am now running on 7 years with the OEM Jeep plug wires in my CJ7.
'Performance' just means they will put out a nice clean spark... while
they work.
They are designed to work for at least 'one' race.....
Like a 'performance' engine. Race cars change those every race or two
also....
Accel wire are supposed to be 9mm 'performance' wires. Well they worked
until I had to check my spark plugs, then every metal clip on the ends
pulled off when I removed them. Half were arced out already which meant
they were broken to start and had been jumping that gap since new.
Belden make cables. They are twice the price of the same cable from any
competetitor just because of their name stamped in pure gold on the side
of the cable. (it must be pure gold, nothing else justifies their price)
Just my $0.02....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
The Merg wrote:
> Bruce,
> I can't seem to find a website for Belden. Do you know where I can
> find some info or where I would be able to pick them up?
> Thanks a lot.
>
> On Feb 8, 10:34 am, "Highcountry" <highcountry2...@hotmail.com> wrote:
>> Mike you are "one of the few"! Mercy, the parts situation is going
>> to the dogs, or at least the Chinese!
>>
>> I also put an Accel coil on my CJ, not sure which one but it fits in
>> the standard bracket and has a Resin Core instead of oil to resist
>> vibration. It gave a noticable smoothness to the idle.
>>
>> If you are REALLY insistant, you can still get a good Cap and Rotor.
>> Borg Warner still has available the good cap with the BRASS terminals
>> and a decent rotor. You will most likely need to ASK for the BEST
>> stuff to get it, everyone quotes prices on the Chinese Junk to keep
>> from scaring off the "Bubba Mechanics".
>>
>> Wires are even harder to find. The only ones I can recommend are the
>> Belden brand, and make sure that when you open the box they are a Deep
>> Navy Blue in color. These are the good ones and you won't have any
>> problems with them. Belden makes wires for NASCAR, so they do know
>> what is necessary to make a good wire.
>>
>> Good Luck, Bruce
>
>
the last 35 years or so and none have performed or stood up as well as
the OEM ones from the $tealership.
I am now running on 7 years with the OEM Jeep plug wires in my CJ7.
'Performance' just means they will put out a nice clean spark... while
they work.
They are designed to work for at least 'one' race.....
Like a 'performance' engine. Race cars change those every race or two
also....
Accel wire are supposed to be 9mm 'performance' wires. Well they worked
until I had to check my spark plugs, then every metal clip on the ends
pulled off when I removed them. Half were arced out already which meant
they were broken to start and had been jumping that gap since new.
Belden make cables. They are twice the price of the same cable from any
competetitor just because of their name stamped in pure gold on the side
of the cable. (it must be pure gold, nothing else justifies their price)
Just my $0.02....
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
The Merg wrote:
> Bruce,
> I can't seem to find a website for Belden. Do you know where I can
> find some info or where I would be able to pick them up?
> Thanks a lot.
>
> On Feb 8, 10:34 am, "Highcountry" <highcountry2...@hotmail.com> wrote:
>> Mike you are "one of the few"! Mercy, the parts situation is going
>> to the dogs, or at least the Chinese!
>>
>> I also put an Accel coil on my CJ, not sure which one but it fits in
>> the standard bracket and has a Resin Core instead of oil to resist
>> vibration. It gave a noticable smoothness to the idle.
>>
>> If you are REALLY insistant, you can still get a good Cap and Rotor.
>> Borg Warner still has available the good cap with the BRASS terminals
>> and a decent rotor. You will most likely need to ASK for the BEST
>> stuff to get it, everyone quotes prices on the Chinese Junk to keep
>> from scaring off the "Bubba Mechanics".
>>
>> Wires are even harder to find. The only ones I can recommend are the
>> Belden brand, and make sure that when you open the box they are a Deep
>> Navy Blue in color. These are the good ones and you won't have any
>> problems with them. Belden makes wires for NASCAR, so they do know
>> what is necessary to make a good wire.
>>
>> Good Luck, Bruce
>
>