|
Re: Bearing issues
:)
Rusted wrote: > Just drive the jeep, the noise from the bad bearings is only half as > annoying as someone criticizing you as you try to help them. > > > "Joseph P" <jpribe@nc.rr.com> wrote in message > news:UTMsc.60067$V_.2727758@twister.southeast.rr.c om... > >>I was trying to save myself from >>4vLsc.60791$U4.7529@fe29.usenetserver.com, >>but <noEmail@please.com> wouldn't let me go... >>| Can you remove the driveline without losing fluid out of your t >>case? >>Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase (has >>splined output shaft.) >> >>And don't top post, it is terrible netiquette |
Re: Bearing issues
I drove for quite a while like that in my CJ7. I was very careful about
accelerating with the wheels turned hard, but other than that I run in 4x4 for weeks at a time in the winter. I don't expect damage.... Just make sure you don't lose the fluid. I think Jerry B said a WD40 cap will fit right on and a hose clamp holds it.... Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Joseph P wrote: > > Can't get into the shop soon enough, and my TJ is my only > vehicle...needs opinions (fact would be better) as to how long I can > drive on the front axle. Read as: Rear propeller shaft (driveshaft) > removed from vehicle, transfer case place in 4H. > > -- > -- > Joe Pribe > NC > jpribe 'at' nc.rr.com > jegp 'at' hotmail.com > ---- I Love My O|||||||O TJ |
Re: Bearing issues
I drove for quite a while like that in my CJ7. I was very careful about
accelerating with the wheels turned hard, but other than that I run in 4x4 for weeks at a time in the winter. I don't expect damage.... Just make sure you don't lose the fluid. I think Jerry B said a WD40 cap will fit right on and a hose clamp holds it.... Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Joseph P wrote: > > Can't get into the shop soon enough, and my TJ is my only > vehicle...needs opinions (fact would be better) as to how long I can > drive on the front axle. Read as: Rear propeller shaft (driveshaft) > removed from vehicle, transfer case place in 4H. > > -- > -- > Joe Pribe > NC > jpribe 'at' nc.rr.com > jegp 'at' hotmail.com > ---- I Love My O|||||||O TJ |
Re: Bearing issues
I drove for quite a while like that in my CJ7. I was very careful about
accelerating with the wheels turned hard, but other than that I run in 4x4 for weeks at a time in the winter. I don't expect damage.... Just make sure you don't lose the fluid. I think Jerry B said a WD40 cap will fit right on and a hose clamp holds it.... Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Joseph P wrote: > > Can't get into the shop soon enough, and my TJ is my only > vehicle...needs opinions (fact would be better) as to how long I can > drive on the front axle. Read as: Rear propeller shaft (driveshaft) > removed from vehicle, transfer case place in 4H. > > -- > -- > Joe Pribe > NC > jpribe 'at' nc.rr.com > jegp 'at' hotmail.com > ---- I Love My O|||||||O TJ |
Re: Bearing issues
I drove for quite a while like that in my CJ7. I was very careful about
accelerating with the wheels turned hard, but other than that I run in 4x4 for weeks at a time in the winter. I don't expect damage.... Just make sure you don't lose the fluid. I think Jerry B said a WD40 cap will fit right on and a hose clamp holds it.... Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Joseph P wrote: > > Can't get into the shop soon enough, and my TJ is my only > vehicle...needs opinions (fact would be better) as to how long I can > drive on the front axle. Read as: Rear propeller shaft (driveshaft) > removed from vehicle, transfer case place in 4H. > > -- > -- > Joe Pribe > NC > jpribe 'at' nc.rr.com > jegp 'at' hotmail.com > ---- I Love My O|||||||O TJ |
Re: Bearing issues
Many of us find BOTTOM posting to be a pain. Shrug.
Joseph P wrote: > I was trying to save myself from > 4vLsc.60791$U4.7529@fe29.usenetserver.com, > but <noEmail@please.com> wouldn't let me go... > > | > | > | "Joseph P" <jpribe@nc.rr.com> wrote in message > | news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om... > || Can't get into the shop soon enough, and my TJ is my only > || vehicle...needs opinions (fact would be better) as to how > || long I can drive on the front axle. Read as: Rear propeller > || shaft (driveshaft) removed from vehicle, transfer case place > || in 4H. > || > > | What bearings are bad? > Pinion bearings, maybe carrier as well, getting it rebuilt, probably > by Rob @ http://www.downeastoffroad.com/ > > | Does removing the rear axle stop those bearings from moving? > No, but by doing so, and removing anykind of actual load from those > bearing, the noise has gone away, so I do indeed know what the problem > is. > > | Can you remove the driveline without losing fluid out of your t > case? > Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase (has > splined output shaft.) > > And don't top post, it is terrible netiquette > > || > || > || -- > || -- > || Joe Pribe > || NC > || jpribe 'at' nc.rr.com > || jegp 'at' hotmail.com > || ---- I Love My O|||||||O TJ > > > |
Re: Bearing issues
Many of us find BOTTOM posting to be a pain. Shrug.
Joseph P wrote: > I was trying to save myself from > 4vLsc.60791$U4.7529@fe29.usenetserver.com, > but <noEmail@please.com> wouldn't let me go... > > | > | > | "Joseph P" <jpribe@nc.rr.com> wrote in message > | news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om... > || Can't get into the shop soon enough, and my TJ is my only > || vehicle...needs opinions (fact would be better) as to how > || long I can drive on the front axle. Read as: Rear propeller > || shaft (driveshaft) removed from vehicle, transfer case place > || in 4H. > || > > | What bearings are bad? > Pinion bearings, maybe carrier as well, getting it rebuilt, probably > by Rob @ http://www.downeastoffroad.com/ > > | Does removing the rear axle stop those bearings from moving? > No, but by doing so, and removing anykind of actual load from those > bearing, the noise has gone away, so I do indeed know what the problem > is. > > | Can you remove the driveline without losing fluid out of your t > case? > Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase (has > splined output shaft.) > > And don't top post, it is terrible netiquette > > || > || > || -- > || -- > || Joe Pribe > || NC > || jpribe 'at' nc.rr.com > || jegp 'at' hotmail.com > || ---- I Love My O|||||||O TJ > > > |
Re: Bearing issues
Many of us find BOTTOM posting to be a pain. Shrug.
Joseph P wrote: > I was trying to save myself from > 4vLsc.60791$U4.7529@fe29.usenetserver.com, > but <noEmail@please.com> wouldn't let me go... > > | > | > | "Joseph P" <jpribe@nc.rr.com> wrote in message > | news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om... > || Can't get into the shop soon enough, and my TJ is my only > || vehicle...needs opinions (fact would be better) as to how > || long I can drive on the front axle. Read as: Rear propeller > || shaft (driveshaft) removed from vehicle, transfer case place > || in 4H. > || > > | What bearings are bad? > Pinion bearings, maybe carrier as well, getting it rebuilt, probably > by Rob @ http://www.downeastoffroad.com/ > > | Does removing the rear axle stop those bearings from moving? > No, but by doing so, and removing anykind of actual load from those > bearing, the noise has gone away, so I do indeed know what the problem > is. > > | Can you remove the driveline without losing fluid out of your t > case? > Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase (has > splined output shaft.) > > And don't top post, it is terrible netiquette > > || > || > || -- > || -- > || Joe Pribe > || NC > || jpribe 'at' nc.rr.com > || jegp 'at' hotmail.com > || ---- I Love My O|||||||O TJ > > > |
Re: Bearing issues
Many of us find BOTTOM posting to be a pain. Shrug.
Joseph P wrote: > I was trying to save myself from > 4vLsc.60791$U4.7529@fe29.usenetserver.com, > but <noEmail@please.com> wouldn't let me go... > > | > | > | "Joseph P" <jpribe@nc.rr.com> wrote in message > | news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om... > || Can't get into the shop soon enough, and my TJ is my only > || vehicle...needs opinions (fact would be better) as to how > || long I can drive on the front axle. Read as: Rear propeller > || shaft (driveshaft) removed from vehicle, transfer case place > || in 4H. > || > > | What bearings are bad? > Pinion bearings, maybe carrier as well, getting it rebuilt, probably > by Rob @ http://www.downeastoffroad.com/ > > | Does removing the rear axle stop those bearings from moving? > No, but by doing so, and removing anykind of actual load from those > bearing, the noise has gone away, so I do indeed know what the problem > is. > > | Can you remove the driveline without losing fluid out of your t > case? > Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase (has > splined output shaft.) > > And don't top post, it is terrible netiquette > > || > || > || -- > || -- > || Joe Pribe > || NC > || jpribe 'at' nc.rr.com > || jegp 'at' hotmail.com > || ---- I Love My O|||||||O TJ > > > |
Re: Bearing issues
I was trying to save myself from
naOsc.33742$cA1.22976@fe13.usenetserver.com, but <noEmail@please.com> wouldn't let me go... | Just drive the jeep, the noise from the bad bearings is only | half as annoying as someone criticizing you as you try to help | them. | | | "Joseph P" <jpribe@nc.rr.com> wrote in message | news:UTMsc.60067$V_.2727758@twister.southeast.rr.c om... || I was trying to save myself from || 4vLsc.60791$U4.7529@fe29.usenetserver.com, || but <noEmail@please.com> wouldn't let me go... || ||| ||| ||| "Joseph P" <jpribe@nc.rr.com> wrote in message ||| news:y5Lsc.60041$V_.2721315@twister.southeast.rr.c om... |||| Can't get into the shop soon enough, and my TJ is my only |||| vehicle...needs opinions (fact would be better) as to how |||| long I can drive on the front axle. Read as: Rear |||| propeller shaft (driveshaft) removed from vehicle, transfer |||| case place in 4H. |||| || ||| What bearings are bad? || Pinion bearings, maybe carrier as well, getting it rebuilt, || probably by Rob @ http://www.downeastoffroad.com/ || ||| Does removing the rear axle stop those bearings from moving? || No, but by doing so, and removing anykind of actual load from || those bearing, the noise has gone away, so I do indeed know || what the problem is. || ||| Can you remove the driveline without losing fluid out of ||| your t || case? || Yes. 1998 Jeep Wrangler (did you look at sig?) NV231 TCase || (has splined output shaft.) || || And don't top post, it is terrible netiquette || |||| |||| |||| -- |||| -- |||| Joe Pribe |||| NC |||| jpribe 'at' nc.rr.com |||| jegp 'at' hotmail.com |||| ---- I Love My O|||||||O TJ || || || || -- || -- || Joe Pribe || NC || jpribe 'at' nc.rr.com || jegp 'at' hotmail.com || ---- I Love My O|||||||O TJ Not criticism dude, it is annoyance. You make the assumption that I have no idea what I am talking about. Instead of answering my question, you bring question my decision to pull the rear drive shaft. All I wanted to know about was driving by utilizing the front end only. And you still haven't answered that. -- -- Joe Pribe NC jpribe 'at' nc.rr.com jegp 'at' hotmail.com ---- I Love My O|||||||O TJ |
| All times are GMT -4. The time now is 03:28 PM. |
© 2024 MH Sub I, LLC dba Internet Brands