Banks Headers?
#2
Guest
Posts: n/a
Re: Banks Headers?
bushman did pass the time by typing:
> Does anyone have experience with banks headers? I have a 2KTJ 4.0L. The
> Banks are less $ than Borla and I do not find any other choices for this
> year.
> Thanks to the group for all I have learned. - Allen
http://members.***.net/douglas.wilson/banks/
Keep in mind that's on a ZJ. I had to do a bit of grinding on
the motor mount. YMMV.
Use antisieze on all bolts and follow the book for sequence and torque.
Put a thin coat of permatex copper on the metal surfaces, that will help
prevent any leaks. By thin I mean a bead about this --> o <-- size and
no bigger. You will find a couple of bolts that can only be had with
a crecent wrench. I found it was easier if the airbox was out.
The only thing I will say is when you get that puppy, wipe it down
with rags BEFORE you handle it with your bare hands. They don't clean
off the milling material and I spent about an hour taking stainless steel
splinters out of my hands. (OW!) >_<
There are a few websites out there with more info on the general procedures
for header removal/install. But this should get you started.
http://members.***.net/douglas.wilson/temp/header.jpg
(The torque should be the same but check your specs first)
(Temp files are only there for about a week)
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> Does anyone have experience with banks headers? I have a 2KTJ 4.0L. The
> Banks are less $ than Borla and I do not find any other choices for this
> year.
> Thanks to the group for all I have learned. - Allen
http://members.***.net/douglas.wilson/banks/
Keep in mind that's on a ZJ. I had to do a bit of grinding on
the motor mount. YMMV.
Use antisieze on all bolts and follow the book for sequence and torque.
Put a thin coat of permatex copper on the metal surfaces, that will help
prevent any leaks. By thin I mean a bead about this --> o <-- size and
no bigger. You will find a couple of bolts that can only be had with
a crecent wrench. I found it was easier if the airbox was out.
The only thing I will say is when you get that puppy, wipe it down
with rags BEFORE you handle it with your bare hands. They don't clean
off the milling material and I spent about an hour taking stainless steel
splinters out of my hands. (OW!) >_<
There are a few websites out there with more info on the general procedures
for header removal/install. But this should get you started.
http://members.***.net/douglas.wilson/temp/header.jpg
(The torque should be the same but check your specs first)
(Temp files are only there for about a week)
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
#3
Guest
Posts: n/a
Re: Banks Headers?
bushman did pass the time by typing:
> Does anyone have experience with banks headers? I have a 2KTJ 4.0L. The
> Banks are less $ than Borla and I do not find any other choices for this
> year.
> Thanks to the group for all I have learned. - Allen
http://members.***.net/douglas.wilson/banks/
Keep in mind that's on a ZJ. I had to do a bit of grinding on
the motor mount. YMMV.
Use antisieze on all bolts and follow the book for sequence and torque.
Put a thin coat of permatex copper on the metal surfaces, that will help
prevent any leaks. By thin I mean a bead about this --> o <-- size and
no bigger. You will find a couple of bolts that can only be had with
a crecent wrench. I found it was easier if the airbox was out.
The only thing I will say is when you get that puppy, wipe it down
with rags BEFORE you handle it with your bare hands. They don't clean
off the milling material and I spent about an hour taking stainless steel
splinters out of my hands. (OW!) >_<
There are a few websites out there with more info on the general procedures
for header removal/install. But this should get you started.
http://members.***.net/douglas.wilson/temp/header.jpg
(The torque should be the same but check your specs first)
(Temp files are only there for about a week)
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> Does anyone have experience with banks headers? I have a 2KTJ 4.0L. The
> Banks are less $ than Borla and I do not find any other choices for this
> year.
> Thanks to the group for all I have learned. - Allen
http://members.***.net/douglas.wilson/banks/
Keep in mind that's on a ZJ. I had to do a bit of grinding on
the motor mount. YMMV.
Use antisieze on all bolts and follow the book for sequence and torque.
Put a thin coat of permatex copper on the metal surfaces, that will help
prevent any leaks. By thin I mean a bead about this --> o <-- size and
no bigger. You will find a couple of bolts that can only be had with
a crecent wrench. I found it was easier if the airbox was out.
The only thing I will say is when you get that puppy, wipe it down
with rags BEFORE you handle it with your bare hands. They don't clean
off the milling material and I spent about an hour taking stainless steel
splinters out of my hands. (OW!) >_<
There are a few websites out there with more info on the general procedures
for header removal/install. But this should get you started.
http://members.***.net/douglas.wilson/temp/header.jpg
(The torque should be the same but check your specs first)
(Temp files are only there for about a week)
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
#4
Guest
Posts: n/a
Re: Banks Headers?
bushman did pass the time by typing:
> Does anyone have experience with banks headers? I have a 2KTJ 4.0L. The
> Banks are less $ than Borla and I do not find any other choices for this
> year.
> Thanks to the group for all I have learned. - Allen
http://members.***.net/douglas.wilson/banks/
Keep in mind that's on a ZJ. I had to do a bit of grinding on
the motor mount. YMMV.
Use antisieze on all bolts and follow the book for sequence and torque.
Put a thin coat of permatex copper on the metal surfaces, that will help
prevent any leaks. By thin I mean a bead about this --> o <-- size and
no bigger. You will find a couple of bolts that can only be had with
a crecent wrench. I found it was easier if the airbox was out.
The only thing I will say is when you get that puppy, wipe it down
with rags BEFORE you handle it with your bare hands. They don't clean
off the milling material and I spent about an hour taking stainless steel
splinters out of my hands. (OW!) >_<
There are a few websites out there with more info on the general procedures
for header removal/install. But this should get you started.
http://members.***.net/douglas.wilson/temp/header.jpg
(The torque should be the same but check your specs first)
(Temp files are only there for about a week)
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> Does anyone have experience with banks headers? I have a 2KTJ 4.0L. The
> Banks are less $ than Borla and I do not find any other choices for this
> year.
> Thanks to the group for all I have learned. - Allen
http://members.***.net/douglas.wilson/banks/
Keep in mind that's on a ZJ. I had to do a bit of grinding on
the motor mount. YMMV.
Use antisieze on all bolts and follow the book for sequence and torque.
Put a thin coat of permatex copper on the metal surfaces, that will help
prevent any leaks. By thin I mean a bead about this --> o <-- size and
no bigger. You will find a couple of bolts that can only be had with
a crecent wrench. I found it was easier if the airbox was out.
The only thing I will say is when you get that puppy, wipe it down
with rags BEFORE you handle it with your bare hands. They don't clean
off the milling material and I spent about an hour taking stainless steel
splinters out of my hands. (OW!) >_<
There are a few websites out there with more info on the general procedures
for header removal/install. But this should get you started.
http://members.***.net/douglas.wilson/temp/header.jpg
(The torque should be the same but check your specs first)
(Temp files are only there for about a week)
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
#5
Guest
Posts: n/a
Re: Banks Headers?
There is a company called (I think) Crown that makes them for the TJ, although I dont
know about your year. The 4x4 shop I was using at the time I needed to have mine
changed out suggested them, and I have not had any trouble with it yet.
On Mon, 11 Oct 2004 15:45:59 GMT, "bushman" <none@none.net> wrote:
>>Does anyone have experience with banks headers? I have a 2KTJ 4.0L. The
>>Banks are less $ than Borla and I do not find any other choices for this
>>year.
>>Thanks to the group for all I have learned. - Allen
>>
know about your year. The 4x4 shop I was using at the time I needed to have mine
changed out suggested them, and I have not had any trouble with it yet.
On Mon, 11 Oct 2004 15:45:59 GMT, "bushman" <none@none.net> wrote:
>>Does anyone have experience with banks headers? I have a 2KTJ 4.0L. The
>>Banks are less $ than Borla and I do not find any other choices for this
>>year.
>>Thanks to the group for all I have learned. - Allen
>>
#6
Guest
Posts: n/a
Re: Banks Headers?
There is a company called (I think) Crown that makes them for the TJ, although I dont
know about your year. The 4x4 shop I was using at the time I needed to have mine
changed out suggested them, and I have not had any trouble with it yet.
On Mon, 11 Oct 2004 15:45:59 GMT, "bushman" <none@none.net> wrote:
>>Does anyone have experience with banks headers? I have a 2KTJ 4.0L. The
>>Banks are less $ than Borla and I do not find any other choices for this
>>year.
>>Thanks to the group for all I have learned. - Allen
>>
know about your year. The 4x4 shop I was using at the time I needed to have mine
changed out suggested them, and I have not had any trouble with it yet.
On Mon, 11 Oct 2004 15:45:59 GMT, "bushman" <none@none.net> wrote:
>>Does anyone have experience with banks headers? I have a 2KTJ 4.0L. The
>>Banks are less $ than Borla and I do not find any other choices for this
>>year.
>>Thanks to the group for all I have learned. - Allen
>>
#7
Guest
Posts: n/a
Re: Banks Headers?
There is a company called (I think) Crown that makes them for the TJ, although I dont
know about your year. The 4x4 shop I was using at the time I needed to have mine
changed out suggested them, and I have not had any trouble with it yet.
On Mon, 11 Oct 2004 15:45:59 GMT, "bushman" <none@none.net> wrote:
>>Does anyone have experience with banks headers? I have a 2KTJ 4.0L. The
>>Banks are less $ than Borla and I do not find any other choices for this
>>year.
>>Thanks to the group for all I have learned. - Allen
>>
know about your year. The 4x4 shop I was using at the time I needed to have mine
changed out suggested them, and I have not had any trouble with it yet.
On Mon, 11 Oct 2004 15:45:59 GMT, "bushman" <none@none.net> wrote:
>>Does anyone have experience with banks headers? I have a 2KTJ 4.0L. The
>>Banks are less $ than Borla and I do not find any other choices for this
>>year.
>>Thanks to the group for all I have learned. - Allen
>>
#8
Guest
Posts: n/a
Re: Banks Headers?
I put one on my 96 4.0L I6 XJ. One bolt was no fun at all to get to. Other
then that it was very stright foward. The frst thing I noticed was it runs
cooler. Second was even more low end grunt.
JoBo
"bushman" <none@none.net> wrote in message
news:XUxad.26364$zY6.12127@tornado.tampabay.rr.com ...
> Does anyone have experience with banks headers? I have a 2KTJ 4.0L. The
> Banks are less $ than Borla and I do not find any other choices for this
> year.
> Thanks to the group for all I have learned. - Allen
>
>
then that it was very stright foward. The frst thing I noticed was it runs
cooler. Second was even more low end grunt.
JoBo
"bushman" <none@none.net> wrote in message
news:XUxad.26364$zY6.12127@tornado.tampabay.rr.com ...
> Does anyone have experience with banks headers? I have a 2KTJ 4.0L. The
> Banks are less $ than Borla and I do not find any other choices for this
> year.
> Thanks to the group for all I have learned. - Allen
>
>
#9
Guest
Posts: n/a
Re: Banks Headers?
I put one on my 96 4.0L I6 XJ. One bolt was no fun at all to get to. Other
then that it was very stright foward. The frst thing I noticed was it runs
cooler. Second was even more low end grunt.
JoBo
"bushman" <none@none.net> wrote in message
news:XUxad.26364$zY6.12127@tornado.tampabay.rr.com ...
> Does anyone have experience with banks headers? I have a 2KTJ 4.0L. The
> Banks are less $ than Borla and I do not find any other choices for this
> year.
> Thanks to the group for all I have learned. - Allen
>
>
then that it was very stright foward. The frst thing I noticed was it runs
cooler. Second was even more low end grunt.
JoBo
"bushman" <none@none.net> wrote in message
news:XUxad.26364$zY6.12127@tornado.tampabay.rr.com ...
> Does anyone have experience with banks headers? I have a 2KTJ 4.0L. The
> Banks are less $ than Borla and I do not find any other choices for this
> year.
> Thanks to the group for all I have learned. - Allen
>
>
#10
Guest
Posts: n/a
Re: Banks Headers?
I put one on my 96 4.0L I6 XJ. One bolt was no fun at all to get to. Other
then that it was very stright foward. The frst thing I noticed was it runs
cooler. Second was even more low end grunt.
JoBo
"bushman" <none@none.net> wrote in message
news:XUxad.26364$zY6.12127@tornado.tampabay.rr.com ...
> Does anyone have experience with banks headers? I have a 2KTJ 4.0L. The
> Banks are less $ than Borla and I do not find any other choices for this
> year.
> Thanks to the group for all I have learned. - Allen
>
>
then that it was very stright foward. The frst thing I noticed was it runs
cooler. Second was even more low end grunt.
JoBo
"bushman" <none@none.net> wrote in message
news:XUxad.26364$zY6.12127@tornado.tampabay.rr.com ...
> Does anyone have experience with banks headers? I have a 2KTJ 4.0L. The
> Banks are less $ than Borla and I do not find any other choices for this
> year.
> Thanks to the group for all I have learned. - Allen
>
>