Bad Ignition module or water in fuel?
10-30-2003, 02:14 PM
#31
Guest
Posts: n/a
Re: Bad Ignition module or water in fuel?
It is not uncommon to see them out of adjustment or having a loose
switch after a replaced key or switch.
I would wiggle it pretty hard, it is anchored solid at the key end, so
any movement will be at the switch end.
Mike
Evan wrote:
>
> thanks how hard do I wiggle it?
>
> (open door to joke)
>
> I will give it a shot before I buy, , ,
>
> I did a search late last night and you said the same thing back in 99 =>
>
> I let you know,
>
> Thanks,
>
> 83 CJ 8, a work in progress
> http://hometown.aol.com/ebmvi/MyTJindex.html
> Take out the "XXX" to e-mail me
switch after a replaced key or switch.
I would wiggle it pretty hard, it is anchored solid at the key end, so
any movement will be at the switch end.
Mike
Evan wrote:
>
> thanks how hard do I wiggle it?
>
> (open door to joke)
>
> I will give it a shot before I buy, , ,
>
> I did a search late last night and you said the same thing back in 99 =>
>
> I let you know,
>
> Thanks,
>
> 83 CJ 8, a work in progress
> http://hometown.aol.com/ebmvi/MyTJindex.html
> Take out the "XXX" to e-mail me
11-01-2003, 03:10 PM
#32
Guest
Posts: n/a
Replacing Ignition module - - Ping Mike
ok, so I got the new ignition module in, and now no spark.
The only difence, is the old one had an exstra wire, (purple but labeld blue)
the new module addreses this, that there is no need for this exstra wire, and
no modification is requiered, so what to do? do I have the wrong one, or do I
need to splice the one stray wire in, outher wise a simple install
thanks,
83 CJ 8, a work in progress
http://hometown.aol.com/ebmvi/MyTJindex.html
Take out the "XXX" to e-mail me
The only difence, is the old one had an exstra wire, (purple but labeld blue)
the new module addreses this, that there is no need for this exstra wire, and
no modification is requiered, so what to do? do I have the wrong one, or do I
need to splice the one stray wire in, outher wise a simple install
thanks,
83 CJ 8, a work in progress
http://hometown.aol.com/ebmvi/MyTJindex.html
Take out the "XXX" to e-mail me
11-01-2003, 03:10 PM
#33
Guest
Posts: n/a
Replacing Ignition module - - Ping Mike
ok, so I got the new ignition module in, and now no spark.
The only difence, is the old one had an exstra wire, (purple but labeld blue)
the new module addreses this, that there is no need for this exstra wire, and
no modification is requiered, so what to do? do I have the wrong one, or do I
need to splice the one stray wire in, outher wise a simple install
thanks,
83 CJ 8, a work in progress
http://hometown.aol.com/ebmvi/MyTJindex.html
Take out the "XXX" to e-mail me
The only difence, is the old one had an exstra wire, (purple but labeld blue)
the new module addreses this, that there is no need for this exstra wire, and
no modification is requiered, so what to do? do I have the wrong one, or do I
need to splice the one stray wire in, outher wise a simple install
thanks,
83 CJ 8, a work in progress
http://hometown.aol.com/ebmvi/MyTJindex.html
Take out the "XXX" to e-mail me
11-01-2003, 03:10 PM
#34
Guest
Posts: n/a
Replacing Ignition module - - Ping Mike
ok, so I got the new ignition module in, and now no spark.
The only difence, is the old one had an exstra wire, (purple but labeld blue)
the new module addreses this, that there is no need for this exstra wire, and
no modification is requiered, so what to do? do I have the wrong one, or do I
need to splice the one stray wire in, outher wise a simple install
thanks,
83 CJ 8, a work in progress
http://hometown.aol.com/ebmvi/MyTJindex.html
Take out the "XXX" to e-mail me
The only difence, is the old one had an exstra wire, (purple but labeld blue)
the new module addreses this, that there is no need for this exstra wire, and
no modification is requiered, so what to do? do I have the wrong one, or do I
need to splice the one stray wire in, outher wise a simple install
thanks,
83 CJ 8, a work in progress
http://hometown.aol.com/ebmvi/MyTJindex.html
Take out the "XXX" to e-mail me
11-01-2003, 05:08 PM
#35
Guest
Posts: n/a
Re: Replacing Ignition module - - Ping Mike
Ummm, the stock one is looking for the computer to run the purple wire.
You will need to splice a wire in.
I really don't understand what you are trying to say though...
If the old one had the purple wire hooked up, it had no computer running
the ignition.
The module will have a purple wire, it's the wiring harness that is
missing the purple if the computer is running things.
If the wiring harness has the purple, you have to get an ignition module
for a pre 1982 258 with no computer or one with the purple wire.
Mike
Evan wrote:
>
> ok, so I got the new ignition module in, and now no spark.
>
> The only difence, is the old one had an exstra wire, (purple but labeld blue)
> the new module addreses this, that there is no need for this exstra wire, and
> no modification is requiered, so what to do? do I have the wrong one, or do I
> need to splice the one stray wire in, outher wise a simple install
>
> thanks,
> 83 CJ 8, a work in progress
> http://hometown.aol.com/ebmvi/MyTJindex.html
> Take out the "XXX" to e-mail me
You will need to splice a wire in.
I really don't understand what you are trying to say though...
If the old one had the purple wire hooked up, it had no computer running
the ignition.
The module will have a purple wire, it's the wiring harness that is
missing the purple if the computer is running things.
If the wiring harness has the purple, you have to get an ignition module
for a pre 1982 258 with no computer or one with the purple wire.
Mike
Evan wrote:
>
> ok, so I got the new ignition module in, and now no spark.
>
> The only difence, is the old one had an exstra wire, (purple but labeld blue)
> the new module addreses this, that there is no need for this exstra wire, and
> no modification is requiered, so what to do? do I have the wrong one, or do I
> need to splice the one stray wire in, outher wise a simple install
>
> thanks,
> 83 CJ 8, a work in progress
> http://hometown.aol.com/ebmvi/MyTJindex.html
> Take out the "XXX" to e-mail me
11-01-2003, 05:08 PM
#36
Guest
Posts: n/a
Re: Replacing Ignition module - - Ping Mike
Ummm, the stock one is looking for the computer to run the purple wire.
You will need to splice a wire in.
I really don't understand what you are trying to say though...
If the old one had the purple wire hooked up, it had no computer running
the ignition.
The module will have a purple wire, it's the wiring harness that is
missing the purple if the computer is running things.
If the wiring harness has the purple, you have to get an ignition module
for a pre 1982 258 with no computer or one with the purple wire.
Mike
Evan wrote:
>
> ok, so I got the new ignition module in, and now no spark.
>
> The only difence, is the old one had an exstra wire, (purple but labeld blue)
> the new module addreses this, that there is no need for this exstra wire, and
> no modification is requiered, so what to do? do I have the wrong one, or do I
> need to splice the one stray wire in, outher wise a simple install
>
> thanks,
> 83 CJ 8, a work in progress
> http://hometown.aol.com/ebmvi/MyTJindex.html
> Take out the "XXX" to e-mail me
You will need to splice a wire in.
I really don't understand what you are trying to say though...
If the old one had the purple wire hooked up, it had no computer running
the ignition.
The module will have a purple wire, it's the wiring harness that is
missing the purple if the computer is running things.
If the wiring harness has the purple, you have to get an ignition module
for a pre 1982 258 with no computer or one with the purple wire.
Mike
Evan wrote:
>
> ok, so I got the new ignition module in, and now no spark.
>
> The only difence, is the old one had an exstra wire, (purple but labeld blue)
> the new module addreses this, that there is no need for this exstra wire, and
> no modification is requiered, so what to do? do I have the wrong one, or do I
> need to splice the one stray wire in, outher wise a simple install
>
> thanks,
> 83 CJ 8, a work in progress
> http://hometown.aol.com/ebmvi/MyTJindex.html
> Take out the "XXX" to e-mail me
11-01-2003, 05:08 PM
#37
Guest
Posts: n/a
Re: Replacing Ignition module - - Ping Mike
Ummm, the stock one is looking for the computer to run the purple wire.
You will need to splice a wire in.
I really don't understand what you are trying to say though...
If the old one had the purple wire hooked up, it had no computer running
the ignition.
The module will have a purple wire, it's the wiring harness that is
missing the purple if the computer is running things.
If the wiring harness has the purple, you have to get an ignition module
for a pre 1982 258 with no computer or one with the purple wire.
Mike
Evan wrote:
>
> ok, so I got the new ignition module in, and now no spark.
>
> The only difence, is the old one had an exstra wire, (purple but labeld blue)
> the new module addreses this, that there is no need for this exstra wire, and
> no modification is requiered, so what to do? do I have the wrong one, or do I
> need to splice the one stray wire in, outher wise a simple install
>
> thanks,
> 83 CJ 8, a work in progress
> http://hometown.aol.com/ebmvi/MyTJindex.html
> Take out the "XXX" to e-mail me
You will need to splice a wire in.
I really don't understand what you are trying to say though...
If the old one had the purple wire hooked up, it had no computer running
the ignition.
The module will have a purple wire, it's the wiring harness that is
missing the purple if the computer is running things.
If the wiring harness has the purple, you have to get an ignition module
for a pre 1982 258 with no computer or one with the purple wire.
Mike
Evan wrote:
>
> ok, so I got the new ignition module in, and now no spark.
>
> The only difence, is the old one had an exstra wire, (purple but labeld blue)
> the new module addreses this, that there is no need for this exstra wire, and
> no modification is requiered, so what to do? do I have the wrong one, or do I
> need to splice the one stray wire in, outher wise a simple install
>
> thanks,
> 83 CJ 8, a work in progress
> http://hometown.aol.com/ebmvi/MyTJindex.html
> Take out the "XXX" to e-mail me
11-01-2003, 06:56 PM
#38
Guest
Posts: n/a
Re: Replacing Ignition module - - Ping Mike
After a google search, and a closer inspection of the one I removed, I'll
splice it intomarow,
thanks, , ,
I ran out of light today, stinking time-change
83 CJ 8, a work in progress
http://hometown.aol.com/ebmvi/MyTJindex.html
Take out the "XXX" to e-mail me
splice it intomarow,
thanks, , ,
I ran out of light today, stinking time-change
83 CJ 8, a work in progress
http://hometown.aol.com/ebmvi/MyTJindex.html
Take out the "XXX" to e-mail me
11-01-2003, 06:56 PM
#39
Guest
Posts: n/a
Re: Replacing Ignition module - - Ping Mike
After a google search, and a closer inspection of the one I removed, I'll
splice it intomarow,
thanks, , ,
I ran out of light today, stinking time-change
83 CJ 8, a work in progress
http://hometown.aol.com/ebmvi/MyTJindex.html
Take out the "XXX" to e-mail me
splice it intomarow,
thanks, , ,
I ran out of light today, stinking time-change
83 CJ 8, a work in progress
http://hometown.aol.com/ebmvi/MyTJindex.html
Take out the "XXX" to e-mail me
11-01-2003, 06:56 PM
#40
Guest
Posts: n/a
Re: Replacing Ignition module - - Ping Mike
After a google search, and a closer inspection of the one I removed, I'll
splice it intomarow,
thanks, , ,
I ran out of light today, stinking time-change
83 CJ 8, a work in progress
http://hometown.aol.com/ebmvi/MyTJindex.html
Take out the "XXX" to e-mail me
splice it intomarow,
thanks, , ,
I ran out of light today, stinking time-change
83 CJ 8, a work in progress
http://hometown.aol.com/ebmvi/MyTJindex.html
Take out the "XXX" to e-mail me
Thread
Thread Starter
Forum
Replies
Last Post
Michael Vincenty
Jeep Mailing List
0
09-17-2005 04:54 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
