Ignition Module
#1
Guest
Posts: n/a
Ignition Module
I have an 88 Yj (4.2L) that I suspect has a bad ignition Module. Ive
replaced every other damn thing that could possibly be the problem.
(Wont start, erratic spark at the coil). Anyway, my question for the
pros in the group is this: The ignition module for an 87 wrangler is
$36.00 and a replacement for the 88 is $180. I bypassed my dead
computer years ago. Reset the timing, adjusted the carb and its ran
pretty good ever since. Can one simply use the 87 ignition module in
lue of the 88? and if so, is there a wiring diagram somewhere online
that could help me out? (the plugs are different etc.)
Thanks in advance.
-Chris.
replaced every other damn thing that could possibly be the problem.
(Wont start, erratic spark at the coil). Anyway, my question for the
pros in the group is this: The ignition module for an 87 wrangler is
$36.00 and a replacement for the 88 is $180. I bypassed my dead
computer years ago. Reset the timing, adjusted the carb and its ran
pretty good ever since. Can one simply use the 87 ignition module in
lue of the 88? and if so, is there a wiring diagram somewhere online
that could help me out? (the plugs are different etc.)
Thanks in advance.
-Chris.
#2
Guest
Posts: n/a
Re: Ignition Module
I don't know but I kind of doubt it if the plugs are different.
What you might do is replace the guts of the distributor with a
Pertronix kit, they work great and cost about $100.
http://www.pertronix.com/
Jeff DeWitt
Reh wrote:
> I have an 88 Yj (4.2L) that I suspect has a bad ignition Module. Ive
> replaced every other damn thing that could possibly be the problem.
> (Wont start, erratic spark at the coil). Anyway, my question for the
> pros in the group is this: The ignition module for an 87 wrangler is
> $36.00 and a replacement for the 88 is $180. I bypassed my dead
> computer years ago. Reset the timing, adjusted the carb and its ran
> pretty good ever since. Can one simply use the 87 ignition module in
> lue of the 88? and if so, is there a wiring diagram somewhere online
> that could help me out? (the plugs are different etc.)
> Thanks in advance.
> -Chris.
>
What you might do is replace the guts of the distributor with a
Pertronix kit, they work great and cost about $100.
http://www.pertronix.com/
Jeff DeWitt
Reh wrote:
> I have an 88 Yj (4.2L) that I suspect has a bad ignition Module. Ive
> replaced every other damn thing that could possibly be the problem.
> (Wont start, erratic spark at the coil). Anyway, my question for the
> pros in the group is this: The ignition module for an 87 wrangler is
> $36.00 and a replacement for the 88 is $180. I bypassed my dead
> computer years ago. Reset the timing, adjusted the carb and its ran
> pretty good ever since. Can one simply use the 87 ignition module in
> lue of the 88? and if so, is there a wiring diagram somewhere online
> that could help me out? (the plugs are different etc.)
> Thanks in advance.
> -Chris.
>
#3
Guest
Posts: n/a
Re: Ignition Module
I don't know but I kind of doubt it if the plugs are different.
What you might do is replace the guts of the distributor with a
Pertronix kit, they work great and cost about $100.
http://www.pertronix.com/
Jeff DeWitt
Reh wrote:
> I have an 88 Yj (4.2L) that I suspect has a bad ignition Module. Ive
> replaced every other damn thing that could possibly be the problem.
> (Wont start, erratic spark at the coil). Anyway, my question for the
> pros in the group is this: The ignition module for an 87 wrangler is
> $36.00 and a replacement for the 88 is $180. I bypassed my dead
> computer years ago. Reset the timing, adjusted the carb and its ran
> pretty good ever since. Can one simply use the 87 ignition module in
> lue of the 88? and if so, is there a wiring diagram somewhere online
> that could help me out? (the plugs are different etc.)
> Thanks in advance.
> -Chris.
>
What you might do is replace the guts of the distributor with a
Pertronix kit, they work great and cost about $100.
http://www.pertronix.com/
Jeff DeWitt
Reh wrote:
> I have an 88 Yj (4.2L) that I suspect has a bad ignition Module. Ive
> replaced every other damn thing that could possibly be the problem.
> (Wont start, erratic spark at the coil). Anyway, my question for the
> pros in the group is this: The ignition module for an 87 wrangler is
> $36.00 and a replacement for the 88 is $180. I bypassed my dead
> computer years ago. Reset the timing, adjusted the carb and its ran
> pretty good ever since. Can one simply use the 87 ignition module in
> lue of the 88? and if so, is there a wiring diagram somewhere online
> that could help me out? (the plugs are different etc.)
> Thanks in advance.
> -Chris.
>
#4
Guest
Posts: n/a
Re: Ignition Module
I don't know but I kind of doubt it if the plugs are different.
What you might do is replace the guts of the distributor with a
Pertronix kit, they work great and cost about $100.
http://www.pertronix.com/
Jeff DeWitt
Reh wrote:
> I have an 88 Yj (4.2L) that I suspect has a bad ignition Module. Ive
> replaced every other damn thing that could possibly be the problem.
> (Wont start, erratic spark at the coil). Anyway, my question for the
> pros in the group is this: The ignition module for an 87 wrangler is
> $36.00 and a replacement for the 88 is $180. I bypassed my dead
> computer years ago. Reset the timing, adjusted the carb and its ran
> pretty good ever since. Can one simply use the 87 ignition module in
> lue of the 88? and if so, is there a wiring diagram somewhere online
> that could help me out? (the plugs are different etc.)
> Thanks in advance.
> -Chris.
>
What you might do is replace the guts of the distributor with a
Pertronix kit, they work great and cost about $100.
http://www.pertronix.com/
Jeff DeWitt
Reh wrote:
> I have an 88 Yj (4.2L) that I suspect has a bad ignition Module. Ive
> replaced every other damn thing that could possibly be the problem.
> (Wont start, erratic spark at the coil). Anyway, my question for the
> pros in the group is this: The ignition module for an 87 wrangler is
> $36.00 and a replacement for the 88 is $180. I bypassed my dead
> computer years ago. Reset the timing, adjusted the carb and its ran
> pretty good ever since. Can one simply use the 87 ignition module in
> lue of the 88? and if so, is there a wiring diagram somewhere online
> that could help me out? (the plugs are different etc.)
> Thanks in advance.
> -Chris.
>
#5
Guest
Posts: n/a
Re: Ignition Module
I don't know but I kind of doubt it if the plugs are different.
What you might do is replace the guts of the distributor with a
Pertronix kit, they work great and cost about $100.
http://www.pertronix.com/
Jeff DeWitt
Reh wrote:
> I have an 88 Yj (4.2L) that I suspect has a bad ignition Module. Ive
> replaced every other damn thing that could possibly be the problem.
> (Wont start, erratic spark at the coil). Anyway, my question for the
> pros in the group is this: The ignition module for an 87 wrangler is
> $36.00 and a replacement for the 88 is $180. I bypassed my dead
> computer years ago. Reset the timing, adjusted the carb and its ran
> pretty good ever since. Can one simply use the 87 ignition module in
> lue of the 88? and if so, is there a wiring diagram somewhere online
> that could help me out? (the plugs are different etc.)
> Thanks in advance.
> -Chris.
>
What you might do is replace the guts of the distributor with a
Pertronix kit, they work great and cost about $100.
http://www.pertronix.com/
Jeff DeWitt
Reh wrote:
> I have an 88 Yj (4.2L) that I suspect has a bad ignition Module. Ive
> replaced every other damn thing that could possibly be the problem.
> (Wont start, erratic spark at the coil). Anyway, my question for the
> pros in the group is this: The ignition module for an 87 wrangler is
> $36.00 and a replacement for the 88 is $180. I bypassed my dead
> computer years ago. Reset the timing, adjusted the carb and its ran
> pretty good ever since. Can one simply use the 87 ignition module in
> lue of the 88? and if so, is there a wiring diagram somewhere online
> that could help me out? (the plugs are different etc.)
> Thanks in advance.
> -Chris.
>
#6
Guest
Posts: n/a
Re: Ignition Module
I looked at the ignition module, and with the exception of the
different plug types, all of the wiring matched up. I cut the plugs and
spliced the wires. Low and behold, spark.
runs great. So, to recap. If you have a YJ made after 87 and have a
dead or bypassed computer, replace the unit with the older model and
save yourself $140.00.
Just remember to run new wires directly to the distributer (orange and
purple) if it hasnt been done already.
Thanks to all, without the internet the old goat would still be dead in
the driveway.
Cheers,
-Chris.
Jeff DeWitt wrote:
> I don't know but I kind of doubt it if the plugs are different.
>
> What you might do is replace the guts of the distributor with a
> Pertronix kit, they work great and cost about $100.
>
> http://www.pertronix.com/
>
> Jeff DeWitt
>
> Reh wrote:
> > I have an 88 Yj (4.2L) that I suspect has a bad ignition Module. Ive
> > replaced every other damn thing that could possibly be the problem.
> > (Wont start, erratic spark at the coil). Anyway, my question for the
> > pros in the group is this: The ignition module for an 87 wrangler is
> > $36.00 and a replacement for the 88 is $180. I bypassed my dead
> > computer years ago. Reset the timing, adjusted the carb and its ran
> > pretty good ever since. Can one simply use the 87 ignition module in
> > lue of the 88? and if so, is there a wiring diagram somewhere online
> > that could help me out? (the plugs are different etc.)
> > Thanks in advance.
> > -Chris.
> >
different plug types, all of the wiring matched up. I cut the plugs and
spliced the wires. Low and behold, spark.
runs great. So, to recap. If you have a YJ made after 87 and have a
dead or bypassed computer, replace the unit with the older model and
save yourself $140.00.
Just remember to run new wires directly to the distributer (orange and
purple) if it hasnt been done already.
Thanks to all, without the internet the old goat would still be dead in
the driveway.
Cheers,
-Chris.
Jeff DeWitt wrote:
> I don't know but I kind of doubt it if the plugs are different.
>
> What you might do is replace the guts of the distributor with a
> Pertronix kit, they work great and cost about $100.
>
> http://www.pertronix.com/
>
> Jeff DeWitt
>
> Reh wrote:
> > I have an 88 Yj (4.2L) that I suspect has a bad ignition Module. Ive
> > replaced every other damn thing that could possibly be the problem.
> > (Wont start, erratic spark at the coil). Anyway, my question for the
> > pros in the group is this: The ignition module for an 87 wrangler is
> > $36.00 and a replacement for the 88 is $180. I bypassed my dead
> > computer years ago. Reset the timing, adjusted the carb and its ran
> > pretty good ever since. Can one simply use the 87 ignition module in
> > lue of the 88? and if so, is there a wiring diagram somewhere online
> > that could help me out? (the plugs are different etc.)
> > Thanks in advance.
> > -Chris.
> >
#7
Guest
Posts: n/a
Re: Ignition Module
I looked at the ignition module, and with the exception of the
different plug types, all of the wiring matched up. I cut the plugs and
spliced the wires. Low and behold, spark.
runs great. So, to recap. If you have a YJ made after 87 and have a
dead or bypassed computer, replace the unit with the older model and
save yourself $140.00.
Just remember to run new wires directly to the distributer (orange and
purple) if it hasnt been done already.
Thanks to all, without the internet the old goat would still be dead in
the driveway.
Cheers,
-Chris.
Jeff DeWitt wrote:
> I don't know but I kind of doubt it if the plugs are different.
>
> What you might do is replace the guts of the distributor with a
> Pertronix kit, they work great and cost about $100.
>
> http://www.pertronix.com/
>
> Jeff DeWitt
>
> Reh wrote:
> > I have an 88 Yj (4.2L) that I suspect has a bad ignition Module. Ive
> > replaced every other damn thing that could possibly be the problem.
> > (Wont start, erratic spark at the coil). Anyway, my question for the
> > pros in the group is this: The ignition module for an 87 wrangler is
> > $36.00 and a replacement for the 88 is $180. I bypassed my dead
> > computer years ago. Reset the timing, adjusted the carb and its ran
> > pretty good ever since. Can one simply use the 87 ignition module in
> > lue of the 88? and if so, is there a wiring diagram somewhere online
> > that could help me out? (the plugs are different etc.)
> > Thanks in advance.
> > -Chris.
> >
different plug types, all of the wiring matched up. I cut the plugs and
spliced the wires. Low and behold, spark.
runs great. So, to recap. If you have a YJ made after 87 and have a
dead or bypassed computer, replace the unit with the older model and
save yourself $140.00.
Just remember to run new wires directly to the distributer (orange and
purple) if it hasnt been done already.
Thanks to all, without the internet the old goat would still be dead in
the driveway.
Cheers,
-Chris.
Jeff DeWitt wrote:
> I don't know but I kind of doubt it if the plugs are different.
>
> What you might do is replace the guts of the distributor with a
> Pertronix kit, they work great and cost about $100.
>
> http://www.pertronix.com/
>
> Jeff DeWitt
>
> Reh wrote:
> > I have an 88 Yj (4.2L) that I suspect has a bad ignition Module. Ive
> > replaced every other damn thing that could possibly be the problem.
> > (Wont start, erratic spark at the coil). Anyway, my question for the
> > pros in the group is this: The ignition module for an 87 wrangler is
> > $36.00 and a replacement for the 88 is $180. I bypassed my dead
> > computer years ago. Reset the timing, adjusted the carb and its ran
> > pretty good ever since. Can one simply use the 87 ignition module in
> > lue of the 88? and if so, is there a wiring diagram somewhere online
> > that could help me out? (the plugs are different etc.)
> > Thanks in advance.
> > -Chris.
> >
#8
Guest
Posts: n/a
Re: Ignition Module
I looked at the ignition module, and with the exception of the
different plug types, all of the wiring matched up. I cut the plugs and
spliced the wires. Low and behold, spark.
runs great. So, to recap. If you have a YJ made after 87 and have a
dead or bypassed computer, replace the unit with the older model and
save yourself $140.00.
Just remember to run new wires directly to the distributer (orange and
purple) if it hasnt been done already.
Thanks to all, without the internet the old goat would still be dead in
the driveway.
Cheers,
-Chris.
Jeff DeWitt wrote:
> I don't know but I kind of doubt it if the plugs are different.
>
> What you might do is replace the guts of the distributor with a
> Pertronix kit, they work great and cost about $100.
>
> http://www.pertronix.com/
>
> Jeff DeWitt
>
> Reh wrote:
> > I have an 88 Yj (4.2L) that I suspect has a bad ignition Module. Ive
> > replaced every other damn thing that could possibly be the problem.
> > (Wont start, erratic spark at the coil). Anyway, my question for the
> > pros in the group is this: The ignition module for an 87 wrangler is
> > $36.00 and a replacement for the 88 is $180. I bypassed my dead
> > computer years ago. Reset the timing, adjusted the carb and its ran
> > pretty good ever since. Can one simply use the 87 ignition module in
> > lue of the 88? and if so, is there a wiring diagram somewhere online
> > that could help me out? (the plugs are different etc.)
> > Thanks in advance.
> > -Chris.
> >
different plug types, all of the wiring matched up. I cut the plugs and
spliced the wires. Low and behold, spark.
runs great. So, to recap. If you have a YJ made after 87 and have a
dead or bypassed computer, replace the unit with the older model and
save yourself $140.00.
Just remember to run new wires directly to the distributer (orange and
purple) if it hasnt been done already.
Thanks to all, without the internet the old goat would still be dead in
the driveway.
Cheers,
-Chris.
Jeff DeWitt wrote:
> I don't know but I kind of doubt it if the plugs are different.
>
> What you might do is replace the guts of the distributor with a
> Pertronix kit, they work great and cost about $100.
>
> http://www.pertronix.com/
>
> Jeff DeWitt
>
> Reh wrote:
> > I have an 88 Yj (4.2L) that I suspect has a bad ignition Module. Ive
> > replaced every other damn thing that could possibly be the problem.
> > (Wont start, erratic spark at the coil). Anyway, my question for the
> > pros in the group is this: The ignition module for an 87 wrangler is
> > $36.00 and a replacement for the 88 is $180. I bypassed my dead
> > computer years ago. Reset the timing, adjusted the carb and its ran
> > pretty good ever since. Can one simply use the 87 ignition module in
> > lue of the 88? and if so, is there a wiring diagram somewhere online
> > that could help me out? (the plugs are different etc.)
> > Thanks in advance.
> > -Chris.
> >
#9
Guest
Posts: n/a
Re: Ignition Module
I looked at the ignition module, and with the exception of the
different plug types, all of the wiring matched up. I cut the plugs and
spliced the wires. Low and behold, spark.
runs great. So, to recap. If you have a YJ made after 87 and have a
dead or bypassed computer, replace the unit with the older model and
save yourself $140.00.
Just remember to run new wires directly to the distributer (orange and
purple) if it hasnt been done already.
Thanks to all, without the internet the old goat would still be dead in
the driveway.
Cheers,
-Chris.
Jeff DeWitt wrote:
> I don't know but I kind of doubt it if the plugs are different.
>
> What you might do is replace the guts of the distributor with a
> Pertronix kit, they work great and cost about $100.
>
> http://www.pertronix.com/
>
> Jeff DeWitt
>
> Reh wrote:
> > I have an 88 Yj (4.2L) that I suspect has a bad ignition Module. Ive
> > replaced every other damn thing that could possibly be the problem.
> > (Wont start, erratic spark at the coil). Anyway, my question for the
> > pros in the group is this: The ignition module for an 87 wrangler is
> > $36.00 and a replacement for the 88 is $180. I bypassed my dead
> > computer years ago. Reset the timing, adjusted the carb and its ran
> > pretty good ever since. Can one simply use the 87 ignition module in
> > lue of the 88? and if so, is there a wiring diagram somewhere online
> > that could help me out? (the plugs are different etc.)
> > Thanks in advance.
> > -Chris.
> >
different plug types, all of the wiring matched up. I cut the plugs and
spliced the wires. Low and behold, spark.
runs great. So, to recap. If you have a YJ made after 87 and have a
dead or bypassed computer, replace the unit with the older model and
save yourself $140.00.
Just remember to run new wires directly to the distributer (orange and
purple) if it hasnt been done already.
Thanks to all, without the internet the old goat would still be dead in
the driveway.
Cheers,
-Chris.
Jeff DeWitt wrote:
> I don't know but I kind of doubt it if the plugs are different.
>
> What you might do is replace the guts of the distributor with a
> Pertronix kit, they work great and cost about $100.
>
> http://www.pertronix.com/
>
> Jeff DeWitt
>
> Reh wrote:
> > I have an 88 Yj (4.2L) that I suspect has a bad ignition Module. Ive
> > replaced every other damn thing that could possibly be the problem.
> > (Wont start, erratic spark at the coil). Anyway, my question for the
> > pros in the group is this: The ignition module for an 87 wrangler is
> > $36.00 and a replacement for the 88 is $180. I bypassed my dead
> > computer years ago. Reset the timing, adjusted the carb and its ran
> > pretty good ever since. Can one simply use the 87 ignition module in
> > lue of the 88? and if so, is there a wiring diagram somewhere online
> > that could help me out? (the plugs are different etc.)
> > Thanks in advance.
> > -Chris.
> >
#10
Guest
Posts: n/a
Re: Ignition Module
Cool, thanks for the info!
Jeff DeWitt
Reh wrote:
> I looked at the ignition module, and with the exception of the
> different plug types, all of the wiring matched up. I cut the plugs and
> spliced the wires. Low and behold, spark.
> runs great. So, to recap. If you have a YJ made after 87 and have a
> dead or bypassed computer, replace the unit with the older model and
> save yourself $140.00.
> Just remember to run new wires directly to the distributer (orange and
> purple) if it hasnt been done already.
> Thanks to all, without the internet the old goat would still be dead in
> the driveway.
> Cheers,
> -Chris.
>
>
>
>
> Jeff DeWitt wrote:
>
>>I don't know but I kind of doubt it if the plugs are different.
>>
>>What you might do is replace the guts of the distributor with a
>>Pertronix kit, they work great and cost about $100.
>>
>>http://www.pertronix.com/
>>
>>Jeff DeWitt
>>
>>Reh wrote:
>>
>>>I have an 88 Yj (4.2L) that I suspect has a bad ignition Module. Ive
>>>replaced every other damn thing that could possibly be the problem.
>>>(Wont start, erratic spark at the coil). Anyway, my question for the
>>>pros in the group is this: The ignition module for an 87 wrangler is
>>>$36.00 and a replacement for the 88 is $180. I bypassed my dead
>>>computer years ago. Reset the timing, adjusted the carb and its ran
>>>pretty good ever since. Can one simply use the 87 ignition module in
>>>lue of the 88? and if so, is there a wiring diagram somewhere online
>>>that could help me out? (the plugs are different etc.)
>>>Thanks in advance.
>>>-Chris.
>>>
>
>
Jeff DeWitt
Reh wrote:
> I looked at the ignition module, and with the exception of the
> different plug types, all of the wiring matched up. I cut the plugs and
> spliced the wires. Low and behold, spark.
> runs great. So, to recap. If you have a YJ made after 87 and have a
> dead or bypassed computer, replace the unit with the older model and
> save yourself $140.00.
> Just remember to run new wires directly to the distributer (orange and
> purple) if it hasnt been done already.
> Thanks to all, without the internet the old goat would still be dead in
> the driveway.
> Cheers,
> -Chris.
>
>
>
>
> Jeff DeWitt wrote:
>
>>I don't know but I kind of doubt it if the plugs are different.
>>
>>What you might do is replace the guts of the distributor with a
>>Pertronix kit, they work great and cost about $100.
>>
>>http://www.pertronix.com/
>>
>>Jeff DeWitt
>>
>>Reh wrote:
>>
>>>I have an 88 Yj (4.2L) that I suspect has a bad ignition Module. Ive
>>>replaced every other damn thing that could possibly be the problem.
>>>(Wont start, erratic spark at the coil). Anyway, my question for the
>>>pros in the group is this: The ignition module for an 87 wrangler is
>>>$36.00 and a replacement for the 88 is $180. I bypassed my dead
>>>computer years ago. Reset the timing, adjusted the carb and its ran
>>>pretty good ever since. Can one simply use the 87 ignition module in
>>>lue of the 88? and if so, is there a wiring diagram somewhere online
>>>that could help me out? (the plugs are different etc.)
>>>Thanks in advance.
>>>-Chris.
>>>
>
>