Advise on installing tow hooks on 95 Cherokee Sport
02-15-2006, 09:18 PM
#11
Guest
Posts: n/a
Re: Advise on installing tow hooks on 95 Cherokee Sport
Have fun: http://www.----------.com/TierraDS.jpg
http://www.----------.com/tierraDelSol72.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
noneyabusiness wrote:
>
> I'm planning on going to Terra Del Sol this year, and decided that I
> should have some tow hooks on the Jeep in case I need to get pulled
> out of a jam.
>
> Looking at the frame under the front end, I can't see a good place to
> mount them :( There isn't a place where I would be able to install the
> mounting bolts due to the "boxed" (?) section of the frame.
>
> Am I missing something, or should I pay to have the hooks *welded*
> onto the frame? (There is also the matter of the 4" wide "skirt"
> running across the front end, under the bumper - I suppose I could
> just have a notch cut in it to expose the hook(s)?)
>
> Anyone have examples of how/where to install hooks on a Cherokee?
> (I'm thinking of just using a receiver hitch hook for the rear.)
>
> TIA
>
> (95 Cherokee Sport; 4.0L; Auto; 235/ 75R15 Goodyear Wrangler ATs)
http://www.----------.com/tierraDelSol72.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
noneyabusiness wrote:
>
> I'm planning on going to Terra Del Sol this year, and decided that I
> should have some tow hooks on the Jeep in case I need to get pulled
> out of a jam.
>
> Looking at the frame under the front end, I can't see a good place to
> mount them :( There isn't a place where I would be able to install the
> mounting bolts due to the "boxed" (?) section of the frame.
>
> Am I missing something, or should I pay to have the hooks *welded*
> onto the frame? (There is also the matter of the 4" wide "skirt"
> running across the front end, under the bumper - I suppose I could
> just have a notch cut in it to expose the hook(s)?)
>
> Anyone have examples of how/where to install hooks on a Cherokee?
> (I'm thinking of just using a receiver hitch hook for the rear.)
>
> TIA
>
> (95 Cherokee Sport; 4.0L; Auto; 235/ 75R15 Goodyear Wrangler ATs)
02-15-2006, 09:18 PM
#12
Guest
Posts: n/a
Re: Advise on installing tow hooks on 95 Cherokee Sport
Have fun: http://www.----------.com/TierraDS.jpg
http://www.----------.com/tierraDelSol72.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
noneyabusiness wrote:
>
> I'm planning on going to Terra Del Sol this year, and decided that I
> should have some tow hooks on the Jeep in case I need to get pulled
> out of a jam.
>
> Looking at the frame under the front end, I can't see a good place to
> mount them :( There isn't a place where I would be able to install the
> mounting bolts due to the "boxed" (?) section of the frame.
>
> Am I missing something, or should I pay to have the hooks *welded*
> onto the frame? (There is also the matter of the 4" wide "skirt"
> running across the front end, under the bumper - I suppose I could
> just have a notch cut in it to expose the hook(s)?)
>
> Anyone have examples of how/where to install hooks on a Cherokee?
> (I'm thinking of just using a receiver hitch hook for the rear.)
>
> TIA
>
> (95 Cherokee Sport; 4.0L; Auto; 235/ 75R15 Goodyear Wrangler ATs)
http://www.----------.com/tierraDelSol72.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
noneyabusiness wrote:
>
> I'm planning on going to Terra Del Sol this year, and decided that I
> should have some tow hooks on the Jeep in case I need to get pulled
> out of a jam.
>
> Looking at the frame under the front end, I can't see a good place to
> mount them :( There isn't a place where I would be able to install the
> mounting bolts due to the "boxed" (?) section of the frame.
>
> Am I missing something, or should I pay to have the hooks *welded*
> onto the frame? (There is also the matter of the 4" wide "skirt"
> running across the front end, under the bumper - I suppose I could
> just have a notch cut in it to expose the hook(s)?)
>
> Anyone have examples of how/where to install hooks on a Cherokee?
> (I'm thinking of just using a receiver hitch hook for the rear.)
>
> TIA
>
> (95 Cherokee Sport; 4.0L; Auto; 235/ 75R15 Goodyear Wrangler ATs)
02-15-2006, 09:18 PM
#13
Guest
Posts: n/a
Re: Advise on installing tow hooks on 95 Cherokee Sport
Have fun: http://www.----------.com/TierraDS.jpg
http://www.----------.com/tierraDelSol72.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
noneyabusiness wrote:
>
> I'm planning on going to Terra Del Sol this year, and decided that I
> should have some tow hooks on the Jeep in case I need to get pulled
> out of a jam.
>
> Looking at the frame under the front end, I can't see a good place to
> mount them :( There isn't a place where I would be able to install the
> mounting bolts due to the "boxed" (?) section of the frame.
>
> Am I missing something, or should I pay to have the hooks *welded*
> onto the frame? (There is also the matter of the 4" wide "skirt"
> running across the front end, under the bumper - I suppose I could
> just have a notch cut in it to expose the hook(s)?)
>
> Anyone have examples of how/where to install hooks on a Cherokee?
> (I'm thinking of just using a receiver hitch hook for the rear.)
>
> TIA
>
> (95 Cherokee Sport; 4.0L; Auto; 235/ 75R15 Goodyear Wrangler ATs)
http://www.----------.com/tierraDelSol72.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
noneyabusiness wrote:
>
> I'm planning on going to Terra Del Sol this year, and decided that I
> should have some tow hooks on the Jeep in case I need to get pulled
> out of a jam.
>
> Looking at the frame under the front end, I can't see a good place to
> mount them :( There isn't a place where I would be able to install the
> mounting bolts due to the "boxed" (?) section of the frame.
>
> Am I missing something, or should I pay to have the hooks *welded*
> onto the frame? (There is also the matter of the 4" wide "skirt"
> running across the front end, under the bumper - I suppose I could
> just have a notch cut in it to expose the hook(s)?)
>
> Anyone have examples of how/where to install hooks on a Cherokee?
> (I'm thinking of just using a receiver hitch hook for the rear.)
>
> TIA
>
> (95 Cherokee Sport; 4.0L; Auto; 235/ 75R15 Goodyear Wrangler ATs)
02-16-2006, 12:02 PM
#14
Guest
Posts: n/a
Re: Advise on installing tow hooks on 95 Cherokee Sport
On Wed, 15 Feb 2006 18:04:44 -0800, L.W.(ßill) ------ III
<----------@***.net> wrote:
> http://www.jeephorizons.com/tech/xj_hook.html
>http://www.off-road.com/jeep/cheroke...r2/armor2.html
>http://www.custom4x4fabrication.com/recovery.html
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
Maybe I need to take another look, but I was *sure* I saw frame rails
under my XJ !?! (All the links above refer to unibody) If I'm wrong,
I'm glad I didn't buy the hooks yet, cuz the special brackets required
for a unibody are a lot more work than I planned :(
....
>noneyabusiness wrote:
>>
>> I'm planning on going to Terra Del Sol this year, and decided that I
>> should have some tow hooks on the Jeep in case I need to get pulled
>> out of a jam.
>>
>> Looking at the frame under the front end, I can't see a good place to
>> mount them :( There isn't a place where I would be able to install the
>> mounting bolts due to the "boxed" (?) section of the frame.
>>
>> Am I missing something, or should I pay to have the hooks *welded*
>> onto the frame? (There is also the matter of the 4" wide "skirt"
>> running across the front end, under the bumper - I suppose I could
>> just have a notch cut in it to expose the hook(s)?)
>>
>> Anyone have examples of how/where to install hooks on a Cherokee?
>> (I'm thinking of just using a receiver hitch hook for the rear.)
>>
>> TIA
>>
>> (95 Cherokee Sport; 4.0L; Auto; 235/ 75R15 Goodyear Wrangler ATs)
<----------@***.net> wrote:
> http://www.jeephorizons.com/tech/xj_hook.html
>http://www.off-road.com/jeep/cheroke...r2/armor2.html
>http://www.custom4x4fabrication.com/recovery.html
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
Maybe I need to take another look, but I was *sure* I saw frame rails
under my XJ !?! (All the links above refer to unibody) If I'm wrong,
I'm glad I didn't buy the hooks yet, cuz the special brackets required
for a unibody are a lot more work than I planned :(
....
>noneyabusiness wrote:
>>
>> I'm planning on going to Terra Del Sol this year, and decided that I
>> should have some tow hooks on the Jeep in case I need to get pulled
>> out of a jam.
>>
>> Looking at the frame under the front end, I can't see a good place to
>> mount them :( There isn't a place where I would be able to install the
>> mounting bolts due to the "boxed" (?) section of the frame.
>>
>> Am I missing something, or should I pay to have the hooks *welded*
>> onto the frame? (There is also the matter of the 4" wide "skirt"
>> running across the front end, under the bumper - I suppose I could
>> just have a notch cut in it to expose the hook(s)?)
>>
>> Anyone have examples of how/where to install hooks on a Cherokee?
>> (I'm thinking of just using a receiver hitch hook for the rear.)
>>
>> TIA
>>
>> (95 Cherokee Sport; 4.0L; Auto; 235/ 75R15 Goodyear Wrangler ATs)
02-16-2006, 12:02 PM
#15
Guest
Posts: n/a
Re: Advise on installing tow hooks on 95 Cherokee Sport
On Wed, 15 Feb 2006 18:04:44 -0800, L.W.(ßill) ------ III
<----------@***.net> wrote:
> http://www.jeephorizons.com/tech/xj_hook.html
>http://www.off-road.com/jeep/cheroke...r2/armor2.html
>http://www.custom4x4fabrication.com/recovery.html
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
Maybe I need to take another look, but I was *sure* I saw frame rails
under my XJ !?! (All the links above refer to unibody) If I'm wrong,
I'm glad I didn't buy the hooks yet, cuz the special brackets required
for a unibody are a lot more work than I planned :(
....
>noneyabusiness wrote:
>>
>> I'm planning on going to Terra Del Sol this year, and decided that I
>> should have some tow hooks on the Jeep in case I need to get pulled
>> out of a jam.
>>
>> Looking at the frame under the front end, I can't see a good place to
>> mount them :( There isn't a place where I would be able to install the
>> mounting bolts due to the "boxed" (?) section of the frame.
>>
>> Am I missing something, or should I pay to have the hooks *welded*
>> onto the frame? (There is also the matter of the 4" wide "skirt"
>> running across the front end, under the bumper - I suppose I could
>> just have a notch cut in it to expose the hook(s)?)
>>
>> Anyone have examples of how/where to install hooks on a Cherokee?
>> (I'm thinking of just using a receiver hitch hook for the rear.)
>>
>> TIA
>>
>> (95 Cherokee Sport; 4.0L; Auto; 235/ 75R15 Goodyear Wrangler ATs)
<----------@***.net> wrote:
> http://www.jeephorizons.com/tech/xj_hook.html
>http://www.off-road.com/jeep/cheroke...r2/armor2.html
>http://www.custom4x4fabrication.com/recovery.html
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
Maybe I need to take another look, but I was *sure* I saw frame rails
under my XJ !?! (All the links above refer to unibody) If I'm wrong,
I'm glad I didn't buy the hooks yet, cuz the special brackets required
for a unibody are a lot more work than I planned :(
....
>noneyabusiness wrote:
>>
>> I'm planning on going to Terra Del Sol this year, and decided that I
>> should have some tow hooks on the Jeep in case I need to get pulled
>> out of a jam.
>>
>> Looking at the frame under the front end, I can't see a good place to
>> mount them :( There isn't a place where I would be able to install the
>> mounting bolts due to the "boxed" (?) section of the frame.
>>
>> Am I missing something, or should I pay to have the hooks *welded*
>> onto the frame? (There is also the matter of the 4" wide "skirt"
>> running across the front end, under the bumper - I suppose I could
>> just have a notch cut in it to expose the hook(s)?)
>>
>> Anyone have examples of how/where to install hooks on a Cherokee?
>> (I'm thinking of just using a receiver hitch hook for the rear.)
>>
>> TIA
>>
>> (95 Cherokee Sport; 4.0L; Auto; 235/ 75R15 Goodyear Wrangler ATs)
02-16-2006, 12:02 PM
#16
Guest
Posts: n/a
Re: Advise on installing tow hooks on 95 Cherokee Sport
On Wed, 15 Feb 2006 18:04:44 -0800, L.W.(ßill) ------ III
<----------@***.net> wrote:
> http://www.jeephorizons.com/tech/xj_hook.html
>http://www.off-road.com/jeep/cheroke...r2/armor2.html
>http://www.custom4x4fabrication.com/recovery.html
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
Maybe I need to take another look, but I was *sure* I saw frame rails
under my XJ !?! (All the links above refer to unibody) If I'm wrong,
I'm glad I didn't buy the hooks yet, cuz the special brackets required
for a unibody are a lot more work than I planned :(
....
>noneyabusiness wrote:
>>
>> I'm planning on going to Terra Del Sol this year, and decided that I
>> should have some tow hooks on the Jeep in case I need to get pulled
>> out of a jam.
>>
>> Looking at the frame under the front end, I can't see a good place to
>> mount them :( There isn't a place where I would be able to install the
>> mounting bolts due to the "boxed" (?) section of the frame.
>>
>> Am I missing something, or should I pay to have the hooks *welded*
>> onto the frame? (There is also the matter of the 4" wide "skirt"
>> running across the front end, under the bumper - I suppose I could
>> just have a notch cut in it to expose the hook(s)?)
>>
>> Anyone have examples of how/where to install hooks on a Cherokee?
>> (I'm thinking of just using a receiver hitch hook for the rear.)
>>
>> TIA
>>
>> (95 Cherokee Sport; 4.0L; Auto; 235/ 75R15 Goodyear Wrangler ATs)
<----------@***.net> wrote:
> http://www.jeephorizons.com/tech/xj_hook.html
>http://www.off-road.com/jeep/cheroke...r2/armor2.html
>http://www.custom4x4fabrication.com/recovery.html
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
Maybe I need to take another look, but I was *sure* I saw frame rails
under my XJ !?! (All the links above refer to unibody) If I'm wrong,
I'm glad I didn't buy the hooks yet, cuz the special brackets required
for a unibody are a lot more work than I planned :(
....
>noneyabusiness wrote:
>>
>> I'm planning on going to Terra Del Sol this year, and decided that I
>> should have some tow hooks on the Jeep in case I need to get pulled
>> out of a jam.
>>
>> Looking at the frame under the front end, I can't see a good place to
>> mount them :( There isn't a place where I would be able to install the
>> mounting bolts due to the "boxed" (?) section of the frame.
>>
>> Am I missing something, or should I pay to have the hooks *welded*
>> onto the frame? (There is also the matter of the 4" wide "skirt"
>> running across the front end, under the bumper - I suppose I could
>> just have a notch cut in it to expose the hook(s)?)
>>
>> Anyone have examples of how/where to install hooks on a Cherokee?
>> (I'm thinking of just using a receiver hitch hook for the rear.)
>>
>> TIA
>>
>> (95 Cherokee Sport; 4.0L; Auto; 235/ 75R15 Goodyear Wrangler ATs)
02-16-2006, 12:02 PM
#17
Guest
Posts: n/a
Re: Advise on installing tow hooks on 95 Cherokee Sport
On Wed, 15 Feb 2006 18:04:44 -0800, L.W.(ßill) ------ III
<----------@***.net> wrote:
> http://www.jeephorizons.com/tech/xj_hook.html
>http://www.off-road.com/jeep/cheroke...r2/armor2.html
>http://www.custom4x4fabrication.com/recovery.html
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
Maybe I need to take another look, but I was *sure* I saw frame rails
under my XJ !?! (All the links above refer to unibody) If I'm wrong,
I'm glad I didn't buy the hooks yet, cuz the special brackets required
for a unibody are a lot more work than I planned :(
....
>noneyabusiness wrote:
>>
>> I'm planning on going to Terra Del Sol this year, and decided that I
>> should have some tow hooks on the Jeep in case I need to get pulled
>> out of a jam.
>>
>> Looking at the frame under the front end, I can't see a good place to
>> mount them :( There isn't a place where I would be able to install the
>> mounting bolts due to the "boxed" (?) section of the frame.
>>
>> Am I missing something, or should I pay to have the hooks *welded*
>> onto the frame? (There is also the matter of the 4" wide "skirt"
>> running across the front end, under the bumper - I suppose I could
>> just have a notch cut in it to expose the hook(s)?)
>>
>> Anyone have examples of how/where to install hooks on a Cherokee?
>> (I'm thinking of just using a receiver hitch hook for the rear.)
>>
>> TIA
>>
>> (95 Cherokee Sport; 4.0L; Auto; 235/ 75R15 Goodyear Wrangler ATs)
<----------@***.net> wrote:
> http://www.jeephorizons.com/tech/xj_hook.html
>http://www.off-road.com/jeep/cheroke...r2/armor2.html
>http://www.custom4x4fabrication.com/recovery.html
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
Maybe I need to take another look, but I was *sure* I saw frame rails
under my XJ !?! (All the links above refer to unibody) If I'm wrong,
I'm glad I didn't buy the hooks yet, cuz the special brackets required
for a unibody are a lot more work than I planned :(
....
>noneyabusiness wrote:
>>
>> I'm planning on going to Terra Del Sol this year, and decided that I
>> should have some tow hooks on the Jeep in case I need to get pulled
>> out of a jam.
>>
>> Looking at the frame under the front end, I can't see a good place to
>> mount them :( There isn't a place where I would be able to install the
>> mounting bolts due to the "boxed" (?) section of the frame.
>>
>> Am I missing something, or should I pay to have the hooks *welded*
>> onto the frame? (There is also the matter of the 4" wide "skirt"
>> running across the front end, under the bumper - I suppose I could
>> just have a notch cut in it to expose the hook(s)?)
>>
>> Anyone have examples of how/where to install hooks on a Cherokee?
>> (I'm thinking of just using a receiver hitch hook for the rear.)
>>
>> TIA
>>
>> (95 Cherokee Sport; 4.0L; Auto; 235/ 75R15 Goodyear Wrangler ATs)
02-16-2006, 12:30 PM
#18
Guest
Posts: n/a
Re: Advise on installing tow hooks on 95 Cherokee Sport
They call it a 'uniframe' more than a unibody because there are frame
rails all the way along.
The problem is there is no frame out to the bumper so you need frame
extensions to fit tow hooks on. They are pretty beefy too.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
noneyabusiness wrote:
>
> On Wed, 15 Feb 2006 18:04:44 -0800, L.W.(ßill) ------ III
> <----------@***.net> wrote:
>
> > http://www.jeephorizons.com/tech/xj_hook.html
> >http://www.off-road.com/jeep/cheroke...r2/armor2.html
> >http://www.custom4x4fabrication.com/recovery.html
> > God Bless America, Bill O|||||||O
> >mailto:-------------------- http://www.----------.com/
> >
>
> Maybe I need to take another look, but I was *sure* I saw frame rails
> under my XJ !?! (All the links above refer to unibody) If I'm wrong,
> I'm glad I didn't buy the hooks yet, cuz the special brackets required
> for a unibody are a lot more work than I planned :(
>
> ...
>
> >noneyabusiness wrote:
> >>
> >> I'm planning on going to Terra Del Sol this year, and decided that I
> >> should have some tow hooks on the Jeep in case I need to get pulled
> >> out of a jam.
> >>
> >> Looking at the frame under the front end, I can't see a good place to
> >> mount them :( There isn't a place where I would be able to install the
> >> mounting bolts due to the "boxed" (?) section of the frame.
> >>
> >> Am I missing something, or should I pay to have the hooks *welded*
> >> onto the frame? (There is also the matter of the 4" wide "skirt"
> >> running across the front end, under the bumper - I suppose I could
> >> just have a notch cut in it to expose the hook(s)?)
> >>
> >> Anyone have examples of how/where to install hooks on a Cherokee?
> >> (I'm thinking of just using a receiver hitch hook for the rear.)
> >>
> >> TIA
> >>
> >> (95 Cherokee Sport; 4.0L; Auto; 235/ 75R15 Goodyear Wrangler ATs)
rails all the way along.
The problem is there is no frame out to the bumper so you need frame
extensions to fit tow hooks on. They are pretty beefy too.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
noneyabusiness wrote:
>
> On Wed, 15 Feb 2006 18:04:44 -0800, L.W.(ßill) ------ III
> <----------@***.net> wrote:
>
> > http://www.jeephorizons.com/tech/xj_hook.html
> >http://www.off-road.com/jeep/cheroke...r2/armor2.html
> >http://www.custom4x4fabrication.com/recovery.html
> > God Bless America, Bill O|||||||O
> >mailto:-------------------- http://www.----------.com/
> >
>
> Maybe I need to take another look, but I was *sure* I saw frame rails
> under my XJ !?! (All the links above refer to unibody) If I'm wrong,
> I'm glad I didn't buy the hooks yet, cuz the special brackets required
> for a unibody are a lot more work than I planned :(
>
> ...
>
> >noneyabusiness wrote:
> >>
> >> I'm planning on going to Terra Del Sol this year, and decided that I
> >> should have some tow hooks on the Jeep in case I need to get pulled
> >> out of a jam.
> >>
> >> Looking at the frame under the front end, I can't see a good place to
> >> mount them :( There isn't a place where I would be able to install the
> >> mounting bolts due to the "boxed" (?) section of the frame.
> >>
> >> Am I missing something, or should I pay to have the hooks *welded*
> >> onto the frame? (There is also the matter of the 4" wide "skirt"
> >> running across the front end, under the bumper - I suppose I could
> >> just have a notch cut in it to expose the hook(s)?)
> >>
> >> Anyone have examples of how/where to install hooks on a Cherokee?
> >> (I'm thinking of just using a receiver hitch hook for the rear.)
> >>
> >> TIA
> >>
> >> (95 Cherokee Sport; 4.0L; Auto; 235/ 75R15 Goodyear Wrangler ATs)
02-16-2006, 12:30 PM
#19
Guest
Posts: n/a
Re: Advise on installing tow hooks on 95 Cherokee Sport
They call it a 'uniframe' more than a unibody because there are frame
rails all the way along.
The problem is there is no frame out to the bumper so you need frame
extensions to fit tow hooks on. They are pretty beefy too.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
noneyabusiness wrote:
>
> On Wed, 15 Feb 2006 18:04:44 -0800, L.W.(ßill) ------ III
> <----------@***.net> wrote:
>
> > http://www.jeephorizons.com/tech/xj_hook.html
> >http://www.off-road.com/jeep/cheroke...r2/armor2.html
> >http://www.custom4x4fabrication.com/recovery.html
> > God Bless America, Bill O|||||||O
> >mailto:-------------------- http://www.----------.com/
> >
>
> Maybe I need to take another look, but I was *sure* I saw frame rails
> under my XJ !?! (All the links above refer to unibody) If I'm wrong,
> I'm glad I didn't buy the hooks yet, cuz the special brackets required
> for a unibody are a lot more work than I planned :(
>
> ...
>
> >noneyabusiness wrote:
> >>
> >> I'm planning on going to Terra Del Sol this year, and decided that I
> >> should have some tow hooks on the Jeep in case I need to get pulled
> >> out of a jam.
> >>
> >> Looking at the frame under the front end, I can't see a good place to
> >> mount them :( There isn't a place where I would be able to install the
> >> mounting bolts due to the "boxed" (?) section of the frame.
> >>
> >> Am I missing something, or should I pay to have the hooks *welded*
> >> onto the frame? (There is also the matter of the 4" wide "skirt"
> >> running across the front end, under the bumper - I suppose I could
> >> just have a notch cut in it to expose the hook(s)?)
> >>
> >> Anyone have examples of how/where to install hooks on a Cherokee?
> >> (I'm thinking of just using a receiver hitch hook for the rear.)
> >>
> >> TIA
> >>
> >> (95 Cherokee Sport; 4.0L; Auto; 235/ 75R15 Goodyear Wrangler ATs)
rails all the way along.
The problem is there is no frame out to the bumper so you need frame
extensions to fit tow hooks on. They are pretty beefy too.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
noneyabusiness wrote:
>
> On Wed, 15 Feb 2006 18:04:44 -0800, L.W.(ßill) ------ III
> <----------@***.net> wrote:
>
> > http://www.jeephorizons.com/tech/xj_hook.html
> >http://www.off-road.com/jeep/cheroke...r2/armor2.html
> >http://www.custom4x4fabrication.com/recovery.html
> > God Bless America, Bill O|||||||O
> >mailto:-------------------- http://www.----------.com/
> >
>
> Maybe I need to take another look, but I was *sure* I saw frame rails
> under my XJ !?! (All the links above refer to unibody) If I'm wrong,
> I'm glad I didn't buy the hooks yet, cuz the special brackets required
> for a unibody are a lot more work than I planned :(
>
> ...
>
> >noneyabusiness wrote:
> >>
> >> I'm planning on going to Terra Del Sol this year, and decided that I
> >> should have some tow hooks on the Jeep in case I need to get pulled
> >> out of a jam.
> >>
> >> Looking at the frame under the front end, I can't see a good place to
> >> mount them :( There isn't a place where I would be able to install the
> >> mounting bolts due to the "boxed" (?) section of the frame.
> >>
> >> Am I missing something, or should I pay to have the hooks *welded*
> >> onto the frame? (There is also the matter of the 4" wide "skirt"
> >> running across the front end, under the bumper - I suppose I could
> >> just have a notch cut in it to expose the hook(s)?)
> >>
> >> Anyone have examples of how/where to install hooks on a Cherokee?
> >> (I'm thinking of just using a receiver hitch hook for the rear.)
> >>
> >> TIA
> >>
> >> (95 Cherokee Sport; 4.0L; Auto; 235/ 75R15 Goodyear Wrangler ATs)
02-16-2006, 12:30 PM
#20
Guest
Posts: n/a
Re: Advise on installing tow hooks on 95 Cherokee Sport
They call it a 'uniframe' more than a unibody because there are frame
rails all the way along.
The problem is there is no frame out to the bumper so you need frame
extensions to fit tow hooks on. They are pretty beefy too.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
noneyabusiness wrote:
>
> On Wed, 15 Feb 2006 18:04:44 -0800, L.W.(ßill) ------ III
> <----------@***.net> wrote:
>
> > http://www.jeephorizons.com/tech/xj_hook.html
> >http://www.off-road.com/jeep/cheroke...r2/armor2.html
> >http://www.custom4x4fabrication.com/recovery.html
> > God Bless America, Bill O|||||||O
> >mailto:-------------------- http://www.----------.com/
> >
>
> Maybe I need to take another look, but I was *sure* I saw frame rails
> under my XJ !?! (All the links above refer to unibody) If I'm wrong,
> I'm glad I didn't buy the hooks yet, cuz the special brackets required
> for a unibody are a lot more work than I planned :(
>
> ...
>
> >noneyabusiness wrote:
> >>
> >> I'm planning on going to Terra Del Sol this year, and decided that I
> >> should have some tow hooks on the Jeep in case I need to get pulled
> >> out of a jam.
> >>
> >> Looking at the frame under the front end, I can't see a good place to
> >> mount them :( There isn't a place where I would be able to install the
> >> mounting bolts due to the "boxed" (?) section of the frame.
> >>
> >> Am I missing something, or should I pay to have the hooks *welded*
> >> onto the frame? (There is also the matter of the 4" wide "skirt"
> >> running across the front end, under the bumper - I suppose I could
> >> just have a notch cut in it to expose the hook(s)?)
> >>
> >> Anyone have examples of how/where to install hooks on a Cherokee?
> >> (I'm thinking of just using a receiver hitch hook for the rear.)
> >>
> >> TIA
> >>
> >> (95 Cherokee Sport; 4.0L; Auto; 235/ 75R15 Goodyear Wrangler ATs)
rails all the way along.
The problem is there is no frame out to the bumper so you need frame
extensions to fit tow hooks on. They are pretty beefy too.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
noneyabusiness wrote:
>
> On Wed, 15 Feb 2006 18:04:44 -0800, L.W.(ßill) ------ III
> <----------@***.net> wrote:
>
> > http://www.jeephorizons.com/tech/xj_hook.html
> >http://www.off-road.com/jeep/cheroke...r2/armor2.html
> >http://www.custom4x4fabrication.com/recovery.html
> > God Bless America, Bill O|||||||O
> >mailto:-------------------- http://www.----------.com/
> >
>
> Maybe I need to take another look, but I was *sure* I saw frame rails
> under my XJ !?! (All the links above refer to unibody) If I'm wrong,
> I'm glad I didn't buy the hooks yet, cuz the special brackets required
> for a unibody are a lot more work than I planned :(
>
> ...
>
> >noneyabusiness wrote:
> >>
> >> I'm planning on going to Terra Del Sol this year, and decided that I
> >> should have some tow hooks on the Jeep in case I need to get pulled
> >> out of a jam.
> >>
> >> Looking at the frame under the front end, I can't see a good place to
> >> mount them :( There isn't a place where I would be able to install the
> >> mounting bolts due to the "boxed" (?) section of the frame.
> >>
> >> Am I missing something, or should I pay to have the hooks *welded*
> >> onto the frame? (There is also the matter of the 4" wide "skirt"
> >> running across the front end, under the bumper - I suppose I could
> >> just have a notch cut in it to expose the hook(s)?)
> >>
> >> Anyone have examples of how/where to install hooks on a Cherokee?
> >> (I'm thinking of just using a receiver hitch hook for the rear.)
> >>
> >> TIA
> >>
> >> (95 Cherokee Sport; 4.0L; Auto; 235/ 75R15 Goodyear Wrangler ATs)
