What is the sway bar diameter on this vehicle?

The dealer wants way too much for the chshions but the aftermarket guys
can't seem to tell me what size bar I have.

Thanks in advance.

Bob

 

Bob Snyder did pass the time by typing:
> What is the sway bar diameter on this vehicle?
>
> The dealer wants way too much for the chshions but the aftermarket guys
> can't seem to tell me what size bar I have.

Wrap a bit of string around the bar, mark where it crosses, then
hold it against a ruler.

4wheel parts has good information and has been a source for
me on those things.

Some reading. (4.0, but similar in aproach)
http://members.***.net/wilsond/swaybar/
http://members.***.net/wilsond/front...way/index.html
http://members.***.net/wilsond/rear_antisway/index.html

If you want OEM at a better than OEM price try the folks here
http://www.chryslerpartsdirect.com/
I use them quite a bit. Just got motor mount from them at
about 20$ less each than the local dealer.


--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!

 

Bob Snyder did pass the time by typing:
> What is the sway bar diameter on this vehicle?
>
> The dealer wants way too much for the chshions but the aftermarket guys
> can't seem to tell me what size bar I have.

Wrap a bit of string around the bar, mark where it crosses, then
hold it against a ruler.

4wheel parts has good information and has been a source for
me on those things.

Some reading. (4.0, but similar in aproach)
http://members.***.net/wilsond/swaybar/
http://members.***.net/wilsond/front...way/index.html
http://members.***.net/wilsond/rear_antisway/index.html

If you want OEM at a better than OEM price try the folks here
http://www.chryslerpartsdirect.com/
I use them quite a bit. Just got motor mount from them at
about 20$ less each than the local dealer.


--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!

 

Bob Snyder did pass the time by typing:
> What is the sway bar diameter on this vehicle?
>
> The dealer wants way too much for the chshions but the aftermarket guys
> can't seem to tell me what size bar I have.

Wrap a bit of string around the bar, mark where it crosses, then
hold it against a ruler.

4wheel parts has good information and has been a source for
me on those things.

Some reading. (4.0, but similar in aproach)
http://members.***.net/wilsond/swaybar/
http://members.***.net/wilsond/front...way/index.html
http://members.***.net/wilsond/rear_antisway/index.html

If you want OEM at a better than OEM price try the folks here
http://www.chryslerpartsdirect.com/
I use them quite a bit. Just got motor mount from them at
about 20$ less each than the local dealer.


--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!

 

Hi Bob,
Every car's sway bar is built especially for that application,
whether you intend to pull a trailer, or to compensate for the
differences in weight between a V8 and six, that's why the part's man
had to ask. So find something like a crescent, clamp, or anything
that'll a distance long enough to measure:
http://www.----------.com/caliber.jpg
God Bless America, ßill O|||||||O
mailto:--------------------

Bob Snyder wrote:
>
> What is the sway bar diameter on this vehicle?
>
> The dealer wants way too much for the chshions but the aftermarket guys
> can't seem to tell me what size bar I have.
>
> Thanks in advance.
>
> Bob

 

Hi Bob,
Every car's sway bar is built especially for that application,
whether you intend to pull a trailer, or to compensate for the
differences in weight between a V8 and six, that's why the part's man
had to ask. So find something like a crescent, clamp, or anything
that'll a distance long enough to measure:
http://www.----------.com/caliber.jpg
God Bless America, ßill O|||||||O
mailto:--------------------

Bob Snyder wrote:
>
> What is the sway bar diameter on this vehicle?
>
> The dealer wants way too much for the chshions but the aftermarket guys
> can't seem to tell me what size bar I have.
>
> Thanks in advance.
>
> Bob

 

Hi Bob,
Every car's sway bar is built especially for that application,
whether you intend to pull a trailer, or to compensate for the
differences in weight between a V8 and six, that's why the part's man
had to ask. So find something like a crescent, clamp, or anything
that'll a distance long enough to measure:
http://www.----------.com/caliber.jpg
God Bless America, ßill O|||||||O
mailto:--------------------

Bob Snyder wrote:
>
> What is the sway bar diameter on this vehicle?
>
> The dealer wants way too much for the chshions but the aftermarket guys
> can't seem to tell me what size bar I have.
>
> Thanks in advance.
>
> Bob

 

Then divide by Pie roughly (3.1428) or (22/7).
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/


DougW wrote:
>
> Wrap a bit of string around the bar, mark where it crosses, then
> hold it against a ruler.
>
> 4wheel parts has good information and has been a source for
> me on those things.
>
> Some reading. (4.0, but similar in aproach)
> http://members.***.net/wilsond/swaybar/
> http://members.***.net/wilsond/front...way/index.html
> http://members.***.net/wilsond/rear_antisway/index.html
>
> If you want OEM at a better than OEM price try the folks here
> http://www.chryslerpartsdirect.com/
> I use them quite a bit. Just got motor mount from them at
> about 20$ less each than the local dealer.
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!

 

Then divide by Pie roughly (3.1428) or (22/7).
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/


DougW wrote:
>
> Wrap a bit of string around the bar, mark where it crosses, then
> hold it against a ruler.
>
> 4wheel parts has good information and has been a source for
> me on those things.
>
> Some reading. (4.0, but similar in aproach)
> http://members.***.net/wilsond/swaybar/
> http://members.***.net/wilsond/front...way/index.html
> http://members.***.net/wilsond/rear_antisway/index.html
>
> If you want OEM at a better than OEM price try the folks here
> http://www.chryslerpartsdirect.com/
> I use them quite a bit. Just got motor mount from them at
> about 20$ less each than the local dealer.
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!

 

Then divide by Pie roughly (3.1428) or (22/7).
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/


DougW wrote:
>
> Wrap a bit of string around the bar, mark where it crosses, then
> hold it against a ruler.
>
> 4wheel parts has good information and has been a source for
> me on those things.
>
> Some reading. (4.0, but similar in aproach)
> http://members.***.net/wilsond/swaybar/
> http://members.***.net/wilsond/front...way/index.html
> http://members.***.net/wilsond/rear_antisway/index.html
>
> If you want OEM at a better than OEM price try the folks here
> http://www.chryslerpartsdirect.com/
> I use them quite a bit. Just got motor mount from them at
> about 20$ less each than the local dealer.
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!