95 YJ timing chain questions
Guest
Posts: n/a
95 YJ timing chain questions
Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we have
everything off to do it, but can't get large gear off, they both slide out
easily about 3/4" then large one stops dead, you can acually slide it back
and forth making it clunk. We have Hayne and full shop manuals, we've
followed them to this point. Can't see behind gear enough to see if there is
a clip, and books don't say there is, so any ideas?
everything off to do it, but can't get large gear off, they both slide out
easily about 3/4" then large one stops dead, you can acually slide it back
and forth making it clunk. We have Hayne and full shop manuals, we've
followed them to this point. Can't see behind gear enough to see if there is
a clip, and books don't say there is, so any ideas?
Guest
Posts: n/a
Re: 95 YJ timing chain questions
Greg wrote:
> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we have
> everything off to do it, but can't get large gear off, they both slide out
> easily about 3/4" then large one stops dead, you can acually slide it back
> and forth making it clunk. We have Hayne and full shop manuals, we've
> followed them to this point. Can't see behind gear enough to see if there is
> a clip, and books don't say there is, so any ideas?
>
>
I am thinking the key is stuck either in the pulley or on the shaft, but
most likely in the pulley.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we have
> everything off to do it, but can't get large gear off, they both slide out
> easily about 3/4" then large one stops dead, you can acually slide it back
> and forth making it clunk. We have Hayne and full shop manuals, we've
> followed them to this point. Can't see behind gear enough to see if there is
> a clip, and books don't say there is, so any ideas?
>
>
I am thinking the key is stuck either in the pulley or on the shaft, but
most likely in the pulley.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Guest
Posts: n/a
Re: 95 YJ timing chain questions
Greg wrote:
> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we have
> everything off to do it, but can't get large gear off, they both slide out
> easily about 3/4" then large one stops dead, you can acually slide it back
> and forth making it clunk. We have Hayne and full shop manuals, we've
> followed them to this point. Can't see behind gear enough to see if there is
> a clip, and books don't say there is, so any ideas?
>
>
I am thinking the key is stuck either in the pulley or on the shaft, but
most likely in the pulley.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we have
> everything off to do it, but can't get large gear off, they both slide out
> easily about 3/4" then large one stops dead, you can acually slide it back
> and forth making it clunk. We have Hayne and full shop manuals, we've
> followed them to this point. Can't see behind gear enough to see if there is
> a clip, and books don't say there is, so any ideas?
>
>
I am thinking the key is stuck either in the pulley or on the shaft, but
most likely in the pulley.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Guest
Posts: n/a
Re: 95 YJ timing chain questions
Greg wrote:
> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we have
> everything off to do it, but can't get large gear off, they both slide out
> easily about 3/4" then large one stops dead, you can acually slide it back
> and forth making it clunk. We have Hayne and full shop manuals, we've
> followed them to this point. Can't see behind gear enough to see if there is
> a clip, and books don't say there is, so any ideas?
>
>
I am thinking the key is stuck either in the pulley or on the shaft, but
most likely in the pulley.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we have
> everything off to do it, but can't get large gear off, they both slide out
> easily about 3/4" then large one stops dead, you can acually slide it back
> and forth making it clunk. We have Hayne and full shop manuals, we've
> followed them to this point. Can't see behind gear enough to see if there is
> a clip, and books don't say there is, so any ideas?
>
>
I am thinking the key is stuck either in the pulley or on the shaft, but
most likely in the pulley.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Guest
Posts: n/a
Re: 95 YJ timing chain questions
Is that shaft keyed? I know the small gear is keyed on, but the big one
has a 1/2" bolt holding it on.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:460bd4f4$0$31576$9a6e19ea@unlimited.newshosti ng.com...
> Greg wrote:
>> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
>> have everything off to do it, but can't get large gear off, they both
>> slide out easily about 3/4" then large one stops dead, you can acually
>> slide it back and forth making it clunk. We have Hayne and full shop
>> manuals, we've followed them to this point. Can't see behind gear enough
>> to see if there is a clip, and books don't say there is, so any ideas?
>
> I am thinking the key is stuck either in the pulley or on the shaft, but
> most likely in the pulley.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
has a 1/2" bolt holding it on.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:460bd4f4$0$31576$9a6e19ea@unlimited.newshosti ng.com...
> Greg wrote:
>> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
>> have everything off to do it, but can't get large gear off, they both
>> slide out easily about 3/4" then large one stops dead, you can acually
>> slide it back and forth making it clunk. We have Hayne and full shop
>> manuals, we've followed them to this point. Can't see behind gear enough
>> to see if there is a clip, and books don't say there is, so any ideas?
>
> I am thinking the key is stuck either in the pulley or on the shaft, but
> most likely in the pulley.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
Guest
Posts: n/a
Re: 95 YJ timing chain questions
Is that shaft keyed? I know the small gear is keyed on, but the big one
has a 1/2" bolt holding it on.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:460bd4f4$0$31576$9a6e19ea@unlimited.newshosti ng.com...
> Greg wrote:
>> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
>> have everything off to do it, but can't get large gear off, they both
>> slide out easily about 3/4" then large one stops dead, you can acually
>> slide it back and forth making it clunk. We have Hayne and full shop
>> manuals, we've followed them to this point. Can't see behind gear enough
>> to see if there is a clip, and books don't say there is, so any ideas?
>
> I am thinking the key is stuck either in the pulley or on the shaft, but
> most likely in the pulley.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
has a 1/2" bolt holding it on.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:460bd4f4$0$31576$9a6e19ea@unlimited.newshosti ng.com...
> Greg wrote:
>> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
>> have everything off to do it, but can't get large gear off, they both
>> slide out easily about 3/4" then large one stops dead, you can acually
>> slide it back and forth making it clunk. We have Hayne and full shop
>> manuals, we've followed them to this point. Can't see behind gear enough
>> to see if there is a clip, and books don't say there is, so any ideas?
>
> I am thinking the key is stuck either in the pulley or on the shaft, but
> most likely in the pulley.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
Guest
Posts: n/a
Re: 95 YJ timing chain questions
Is that shaft keyed? I know the small gear is keyed on, but the big one
has a 1/2" bolt holding it on.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:460bd4f4$0$31576$9a6e19ea@unlimited.newshosti ng.com...
> Greg wrote:
>> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
>> have everything off to do it, but can't get large gear off, they both
>> slide out easily about 3/4" then large one stops dead, you can acually
>> slide it back and forth making it clunk. We have Hayne and full shop
>> manuals, we've followed them to this point. Can't see behind gear enough
>> to see if there is a clip, and books don't say there is, so any ideas?
>
> I am thinking the key is stuck either in the pulley or on the shaft, but
> most likely in the pulley.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
has a 1/2" bolt holding it on.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:460bd4f4$0$31576$9a6e19ea@unlimited.newshosti ng.com...
> Greg wrote:
>> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
>> have everything off to do it, but can't get large gear off, they both
>> slide out easily about 3/4" then large one stops dead, you can acually
>> slide it back and forth making it clunk. We have Hayne and full shop
>> manuals, we've followed them to this point. Can't see behind gear enough
>> to see if there is a clip, and books don't say there is, so any ideas?
>
> I am thinking the key is stuck either in the pulley or on the shaft, but
> most likely in the pulley.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
Guest
Posts: n/a
Re: 95 YJ timing chain questions
My book isn't clear on that, but the pulley has to fit on only one way
doesn't it? I have seen keys rock in the slot jamming like you describe
anyway.
Mike
Greg wrote:
> Is that shaft keyed? I know the small gear is keyed on, but the big one
> has a 1/2" bolt holding it on.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:460bd4f4$0$31576$9a6e19ea@unlimited.newshosti ng.com...
>> Greg wrote:
>>> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
>>> have everything off to do it, but can't get large gear off, they both
>>> slide out easily about 3/4" then large one stops dead, you can acually
>>> slide it back and forth making it clunk. We have Hayne and full shop
>>> manuals, we've followed them to this point. Can't see behind gear enough
>>> to see if there is a clip, and books don't say there is, so any ideas?
>> I am thinking the key is stuck either in the pulley or on the shaft, but
>> most likely in the pulley.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>
>
doesn't it? I have seen keys rock in the slot jamming like you describe
anyway.
Mike
Greg wrote:
> Is that shaft keyed? I know the small gear is keyed on, but the big one
> has a 1/2" bolt holding it on.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:460bd4f4$0$31576$9a6e19ea@unlimited.newshosti ng.com...
>> Greg wrote:
>>> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
>>> have everything off to do it, but can't get large gear off, they both
>>> slide out easily about 3/4" then large one stops dead, you can acually
>>> slide it back and forth making it clunk. We have Hayne and full shop
>>> manuals, we've followed them to this point. Can't see behind gear enough
>>> to see if there is a clip, and books don't say there is, so any ideas?
>> I am thinking the key is stuck either in the pulley or on the shaft, but
>> most likely in the pulley.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>
>
Guest
Posts: n/a
Re: 95 YJ timing chain questions
My book isn't clear on that, but the pulley has to fit on only one way
doesn't it? I have seen keys rock in the slot jamming like you describe
anyway.
Mike
Greg wrote:
> Is that shaft keyed? I know the small gear is keyed on, but the big one
> has a 1/2" bolt holding it on.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:460bd4f4$0$31576$9a6e19ea@unlimited.newshosti ng.com...
>> Greg wrote:
>>> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
>>> have everything off to do it, but can't get large gear off, they both
>>> slide out easily about 3/4" then large one stops dead, you can acually
>>> slide it back and forth making it clunk. We have Hayne and full shop
>>> manuals, we've followed them to this point. Can't see behind gear enough
>>> to see if there is a clip, and books don't say there is, so any ideas?
>> I am thinking the key is stuck either in the pulley or on the shaft, but
>> most likely in the pulley.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>
>
doesn't it? I have seen keys rock in the slot jamming like you describe
anyway.
Mike
Greg wrote:
> Is that shaft keyed? I know the small gear is keyed on, but the big one
> has a 1/2" bolt holding it on.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:460bd4f4$0$31576$9a6e19ea@unlimited.newshosti ng.com...
>> Greg wrote:
>>> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
>>> have everything off to do it, but can't get large gear off, they both
>>> slide out easily about 3/4" then large one stops dead, you can acually
>>> slide it back and forth making it clunk. We have Hayne and full shop
>>> manuals, we've followed them to this point. Can't see behind gear enough
>>> to see if there is a clip, and books don't say there is, so any ideas?
>> I am thinking the key is stuck either in the pulley or on the shaft, but
>> most likely in the pulley.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>
>
Guest
Posts: n/a
Re: 95 YJ timing chain questions
My book isn't clear on that, but the pulley has to fit on only one way
doesn't it? I have seen keys rock in the slot jamming like you describe
anyway.
Mike
Greg wrote:
> Is that shaft keyed? I know the small gear is keyed on, but the big one
> has a 1/2" bolt holding it on.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:460bd4f4$0$31576$9a6e19ea@unlimited.newshosti ng.com...
>> Greg wrote:
>>> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
>>> have everything off to do it, but can't get large gear off, they both
>>> slide out easily about 3/4" then large one stops dead, you can acually
>>> slide it back and forth making it clunk. We have Hayne and full shop
>>> manuals, we've followed them to this point. Can't see behind gear enough
>>> to see if there is a clip, and books don't say there is, so any ideas?
>> I am thinking the key is stuck either in the pulley or on the shaft, but
>> most likely in the pulley.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>
>
doesn't it? I have seen keys rock in the slot jamming like you describe
anyway.
Mike
Greg wrote:
> Is that shaft keyed? I know the small gear is keyed on, but the big one
> has a 1/2" bolt holding it on.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:460bd4f4$0$31576$9a6e19ea@unlimited.newshosti ng.com...
>> Greg wrote:
>>> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
>>> have everything off to do it, but can't get large gear off, they both
>>> slide out easily about 3/4" then large one stops dead, you can acually
>>> slide it back and forth making it clunk. We have Hayne and full shop
>>> manuals, we've followed them to this point. Can't see behind gear enough
>>> to see if there is a clip, and books don't say there is, so any ideas?
>> I am thinking the key is stuck either in the pulley or on the shaft, but
>> most likely in the pulley.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>
>
