95 YJ timing chain questions
#21
Guest
Posts: n/a
Re: 95 YJ timing chain questions
Oops I see all the timing gears use the same picture:
http://www.tellico4x4.com/index.php/...66a97b625047d4
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:460c3ba2$0$3002$9a6e19ea@unlimited.newshostin g.com...
> So that would be the whole cam moving in and out then?
>
> Mike
>
> L.W. (Bill) ------ III wrote:
> > It uses a pin rather than a key, and is very narrow on the cam,
meaning
> > it must be like a press fit to keep from whopping and wearing out:
> > http://www.----------.com/temp/tSprocket4cyl.jpg Use a puller.
> > God Bless America, Bill 0|||||||0
> > mailto:--------------------
> >
> > "Greg" <greglc84@hotmail.com> wrote in message
> > news:qgQOh.86895$zU1.70822@pd7urf1no...
> >> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
> > have
> >> everything off to do it, but can't get large gear off, they both slide
out
> >> easily about 3/4" then large one stops dead, you can acually slide it
back
> >> and forth making it clunk. We have Hayne and full shop manuals, we've
> >> followed them to this point. Can't see behind gear enough to see if
there
> > is
> >> a clip, and books don't say there is, so any ideas?
> >>
> >>
> >
> >
> >
--
Posted via a free Usenet account from http://www.teranews.com
http://www.tellico4x4.com/index.php/...66a97b625047d4
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:460c3ba2$0$3002$9a6e19ea@unlimited.newshostin g.com...
> So that would be the whole cam moving in and out then?
>
> Mike
>
> L.W. (Bill) ------ III wrote:
> > It uses a pin rather than a key, and is very narrow on the cam,
meaning
> > it must be like a press fit to keep from whopping and wearing out:
> > http://www.----------.com/temp/tSprocket4cyl.jpg Use a puller.
> > God Bless America, Bill 0|||||||0
> > mailto:--------------------
> >
> > "Greg" <greglc84@hotmail.com> wrote in message
> > news:qgQOh.86895$zU1.70822@pd7urf1no...
> >> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
> > have
> >> everything off to do it, but can't get large gear off, they both slide
out
> >> easily about 3/4" then large one stops dead, you can acually slide it
back
> >> and forth making it clunk. We have Hayne and full shop manuals, we've
> >> followed them to this point. Can't see behind gear enough to see if
there
> > is
> >> a clip, and books don't say there is, so any ideas?
> >>
> >>
> >
> >
> >
--
Posted via a free Usenet account from http://www.teranews.com
#22
Guest
Posts: n/a
Re: 95 YJ timing chain questions
Oops I see all the timing gears use the same picture:
http://www.tellico4x4.com/index.php/...66a97b625047d4
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:460c3ba2$0$3002$9a6e19ea@unlimited.newshostin g.com...
> So that would be the whole cam moving in and out then?
>
> Mike
>
> L.W. (Bill) ------ III wrote:
> > It uses a pin rather than a key, and is very narrow on the cam,
meaning
> > it must be like a press fit to keep from whopping and wearing out:
> > http://www.----------.com/temp/tSprocket4cyl.jpg Use a puller.
> > God Bless America, Bill 0|||||||0
> > mailto:--------------------
> >
> > "Greg" <greglc84@hotmail.com> wrote in message
> > news:qgQOh.86895$zU1.70822@pd7urf1no...
> >> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
> > have
> >> everything off to do it, but can't get large gear off, they both slide
out
> >> easily about 3/4" then large one stops dead, you can acually slide it
back
> >> and forth making it clunk. We have Hayne and full shop manuals, we've
> >> followed them to this point. Can't see behind gear enough to see if
there
> > is
> >> a clip, and books don't say there is, so any ideas?
> >>
> >>
> >
> >
> >
--
Posted via a free Usenet account from http://www.teranews.com
http://www.tellico4x4.com/index.php/...66a97b625047d4
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:460c3ba2$0$3002$9a6e19ea@unlimited.newshostin g.com...
> So that would be the whole cam moving in and out then?
>
> Mike
>
> L.W. (Bill) ------ III wrote:
> > It uses a pin rather than a key, and is very narrow on the cam,
meaning
> > it must be like a press fit to keep from whopping and wearing out:
> > http://www.----------.com/temp/tSprocket4cyl.jpg Use a puller.
> > God Bless America, Bill 0|||||||0
> > mailto:--------------------
> >
> > "Greg" <greglc84@hotmail.com> wrote in message
> > news:qgQOh.86895$zU1.70822@pd7urf1no...
> >> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
> > have
> >> everything off to do it, but can't get large gear off, they both slide
out
> >> easily about 3/4" then large one stops dead, you can acually slide it
back
> >> and forth making it clunk. We have Hayne and full shop manuals, we've
> >> followed them to this point. Can't see behind gear enough to see if
there
> > is
> >> a clip, and books don't say there is, so any ideas?
> >>
> >>
> >
> >
> >
--
Posted via a free Usenet account from http://www.teranews.com
#23
Guest
Posts: n/a
Re: 95 YJ timing chain questions
Still weird:
http://rep.racepages.com/parts/racep...howdc=true#top
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
> Oops I see all the timing gears use the same picture:
>
http://www.tellico4x4.com/index.php/...66a97b625047d4
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:460c3ba2$0$3002$9a6e19ea@unlimited.newshostin g.com...
> > So that would be the whole cam moving in and out then?
> >
> > Mike
> >
> > L.W. (Bill) ------ III wrote:
> > > It uses a pin rather than a key, and is very narrow on the cam,
> meaning
> > > it must be like a press fit to keep from whopping and wearing out:
> > > http://www.----------.com/temp/tSprocket4cyl.jpg Use a puller.
> > > God Bless America, Bill 0|||||||0
> > > mailto:--------------------
> > >
> > > "Greg" <greglc84@hotmail.com> wrote in message
> > > news:qgQOh.86895$zU1.70822@pd7urf1no...
> > >> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L,
we
> > > have
> > >> everything off to do it, but can't get large gear off, they both
slide
> out
> > >> easily about 3/4" then large one stops dead, you can acually slide it
> back
> > >> and forth making it clunk. We have Hayne and full shop manuals, we've
> > >> followed them to this point. Can't see behind gear enough to see if
> there
> > > is
> > >> a clip, and books don't say there is, so any ideas?
> > >>
> > >>
> > >
> > >
> > >
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
--
Posted via a free Usenet account from http://www.teranews.com
http://rep.racepages.com/parts/racep...howdc=true#top
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
> Oops I see all the timing gears use the same picture:
>
http://www.tellico4x4.com/index.php/...66a97b625047d4
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:460c3ba2$0$3002$9a6e19ea@unlimited.newshostin g.com...
> > So that would be the whole cam moving in and out then?
> >
> > Mike
> >
> > L.W. (Bill) ------ III wrote:
> > > It uses a pin rather than a key, and is very narrow on the cam,
> meaning
> > > it must be like a press fit to keep from whopping and wearing out:
> > > http://www.----------.com/temp/tSprocket4cyl.jpg Use a puller.
> > > God Bless America, Bill 0|||||||0
> > > mailto:--------------------
> > >
> > > "Greg" <greglc84@hotmail.com> wrote in message
> > > news:qgQOh.86895$zU1.70822@pd7urf1no...
> > >> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L,
we
> > > have
> > >> everything off to do it, but can't get large gear off, they both
slide
> out
> > >> easily about 3/4" then large one stops dead, you can acually slide it
> back
> > >> and forth making it clunk. We have Hayne and full shop manuals, we've
> > >> followed them to this point. Can't see behind gear enough to see if
> there
> > > is
> > >> a clip, and books don't say there is, so any ideas?
> > >>
> > >>
> > >
> > >
> > >
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
--
Posted via a free Usenet account from http://www.teranews.com
#24
Guest
Posts: n/a
Re: 95 YJ timing chain questions
Still weird:
http://rep.racepages.com/parts/racep...howdc=true#top
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
> Oops I see all the timing gears use the same picture:
>
http://www.tellico4x4.com/index.php/...66a97b625047d4
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:460c3ba2$0$3002$9a6e19ea@unlimited.newshostin g.com...
> > So that would be the whole cam moving in and out then?
> >
> > Mike
> >
> > L.W. (Bill) ------ III wrote:
> > > It uses a pin rather than a key, and is very narrow on the cam,
> meaning
> > > it must be like a press fit to keep from whopping and wearing out:
> > > http://www.----------.com/temp/tSprocket4cyl.jpg Use a puller.
> > > God Bless America, Bill 0|||||||0
> > > mailto:--------------------
> > >
> > > "Greg" <greglc84@hotmail.com> wrote in message
> > > news:qgQOh.86895$zU1.70822@pd7urf1no...
> > >> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L,
we
> > > have
> > >> everything off to do it, but can't get large gear off, they both
slide
> out
> > >> easily about 3/4" then large one stops dead, you can acually slide it
> back
> > >> and forth making it clunk. We have Hayne and full shop manuals, we've
> > >> followed them to this point. Can't see behind gear enough to see if
> there
> > > is
> > >> a clip, and books don't say there is, so any ideas?
> > >>
> > >>
> > >
> > >
> > >
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
--
Posted via a free Usenet account from http://www.teranews.com
http://rep.racepages.com/parts/racep...howdc=true#top
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
> Oops I see all the timing gears use the same picture:
>
http://www.tellico4x4.com/index.php/...66a97b625047d4
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:460c3ba2$0$3002$9a6e19ea@unlimited.newshostin g.com...
> > So that would be the whole cam moving in and out then?
> >
> > Mike
> >
> > L.W. (Bill) ------ III wrote:
> > > It uses a pin rather than a key, and is very narrow on the cam,
> meaning
> > > it must be like a press fit to keep from whopping and wearing out:
> > > http://www.----------.com/temp/tSprocket4cyl.jpg Use a puller.
> > > God Bless America, Bill 0|||||||0
> > > mailto:--------------------
> > >
> > > "Greg" <greglc84@hotmail.com> wrote in message
> > > news:qgQOh.86895$zU1.70822@pd7urf1no...
> > >> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L,
we
> > > have
> > >> everything off to do it, but can't get large gear off, they both
slide
> out
> > >> easily about 3/4" then large one stops dead, you can acually slide it
> back
> > >> and forth making it clunk. We have Hayne and full shop manuals, we've
> > >> followed them to this point. Can't see behind gear enough to see if
> there
> > > is
> > >> a clip, and books don't say there is, so any ideas?
> > >>
> > >>
> > >
> > >
> > >
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
--
Posted via a free Usenet account from http://www.teranews.com
#25
Guest
Posts: n/a
Re: 95 YJ timing chain questions
Still weird:
http://rep.racepages.com/parts/racep...howdc=true#top
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
> Oops I see all the timing gears use the same picture:
>
http://www.tellico4x4.com/index.php/...66a97b625047d4
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:460c3ba2$0$3002$9a6e19ea@unlimited.newshostin g.com...
> > So that would be the whole cam moving in and out then?
> >
> > Mike
> >
> > L.W. (Bill) ------ III wrote:
> > > It uses a pin rather than a key, and is very narrow on the cam,
> meaning
> > > it must be like a press fit to keep from whopping and wearing out:
> > > http://www.----------.com/temp/tSprocket4cyl.jpg Use a puller.
> > > God Bless America, Bill 0|||||||0
> > > mailto:--------------------
> > >
> > > "Greg" <greglc84@hotmail.com> wrote in message
> > > news:qgQOh.86895$zU1.70822@pd7urf1no...
> > >> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L,
we
> > > have
> > >> everything off to do it, but can't get large gear off, they both
slide
> out
> > >> easily about 3/4" then large one stops dead, you can acually slide it
> back
> > >> and forth making it clunk. We have Hayne and full shop manuals, we've
> > >> followed them to this point. Can't see behind gear enough to see if
> there
> > > is
> > >> a clip, and books don't say there is, so any ideas?
> > >>
> > >>
> > >
> > >
> > >
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
--
Posted via a free Usenet account from http://www.teranews.com
http://rep.racepages.com/parts/racep...howdc=true#top
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
> Oops I see all the timing gears use the same picture:
>
http://www.tellico4x4.com/index.php/...66a97b625047d4
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:460c3ba2$0$3002$9a6e19ea@unlimited.newshostin g.com...
> > So that would be the whole cam moving in and out then?
> >
> > Mike
> >
> > L.W. (Bill) ------ III wrote:
> > > It uses a pin rather than a key, and is very narrow on the cam,
> meaning
> > > it must be like a press fit to keep from whopping and wearing out:
> > > http://www.----------.com/temp/tSprocket4cyl.jpg Use a puller.
> > > God Bless America, Bill 0|||||||0
> > > mailto:--------------------
> > >
> > > "Greg" <greglc84@hotmail.com> wrote in message
> > > news:qgQOh.86895$zU1.70822@pd7urf1no...
> > >> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L,
we
> > > have
> > >> everything off to do it, but can't get large gear off, they both
slide
> out
> > >> easily about 3/4" then large one stops dead, you can acually slide it
> back
> > >> and forth making it clunk. We have Hayne and full shop manuals, we've
> > >> followed them to this point. Can't see behind gear enough to see if
> there
> > > is
> > >> a clip, and books don't say there is, so any ideas?
> > >>
> > >>
> > >
> > >
> > >
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
--
Posted via a free Usenet account from http://www.teranews.com
#26
Guest
Posts: n/a
Re: 95 YJ timing chain questions
You are sliding it off as an assembly? As per:
http://www.----------.com/temp/tChain4cyl.pdf
God Bless America, Bill 0|||||||0
mailto:--------------------
"Greg" <greglc84@hotmail.com> wrote in message
news:qgQOh.86895$zU1.70822@pd7urf1no...
> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
have
> everything off to do it, but can't get large gear off, they both slide out
> easily about 3/4" then large one stops dead, you can acually slide it back
> and forth making it clunk. We have Hayne and full shop manuals, we've
> followed them to this point. Can't see behind gear enough to see if there
is
> a clip, and books don't say there is, so any ideas?
>
>
--
Posted via a free Usenet account from http://www.teranews.com
http://www.----------.com/temp/tChain4cyl.pdf
God Bless America, Bill 0|||||||0
mailto:--------------------
"Greg" <greglc84@hotmail.com> wrote in message
news:qgQOh.86895$zU1.70822@pd7urf1no...
> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
have
> everything off to do it, but can't get large gear off, they both slide out
> easily about 3/4" then large one stops dead, you can acually slide it back
> and forth making it clunk. We have Hayne and full shop manuals, we've
> followed them to this point. Can't see behind gear enough to see if there
is
> a clip, and books don't say there is, so any ideas?
>
>
--
Posted via a free Usenet account from http://www.teranews.com
#27
Guest
Posts: n/a
Re: 95 YJ timing chain questions
You are sliding it off as an assembly? As per:
http://www.----------.com/temp/tChain4cyl.pdf
God Bless America, Bill 0|||||||0
mailto:--------------------
"Greg" <greglc84@hotmail.com> wrote in message
news:qgQOh.86895$zU1.70822@pd7urf1no...
> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
have
> everything off to do it, but can't get large gear off, they both slide out
> easily about 3/4" then large one stops dead, you can acually slide it back
> and forth making it clunk. We have Hayne and full shop manuals, we've
> followed them to this point. Can't see behind gear enough to see if there
is
> a clip, and books don't say there is, so any ideas?
>
>
--
Posted via a free Usenet account from http://www.teranews.com
http://www.----------.com/temp/tChain4cyl.pdf
God Bless America, Bill 0|||||||0
mailto:--------------------
"Greg" <greglc84@hotmail.com> wrote in message
news:qgQOh.86895$zU1.70822@pd7urf1no...
> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
have
> everything off to do it, but can't get large gear off, they both slide out
> easily about 3/4" then large one stops dead, you can acually slide it back
> and forth making it clunk. We have Hayne and full shop manuals, we've
> followed them to this point. Can't see behind gear enough to see if there
is
> a clip, and books don't say there is, so any ideas?
>
>
--
Posted via a free Usenet account from http://www.teranews.com
#28
Guest
Posts: n/a
Re: 95 YJ timing chain questions
You are sliding it off as an assembly? As per:
http://www.----------.com/temp/tChain4cyl.pdf
God Bless America, Bill 0|||||||0
mailto:--------------------
"Greg" <greglc84@hotmail.com> wrote in message
news:qgQOh.86895$zU1.70822@pd7urf1no...
> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
have
> everything off to do it, but can't get large gear off, they both slide out
> easily about 3/4" then large one stops dead, you can acually slide it back
> and forth making it clunk. We have Hayne and full shop manuals, we've
> followed them to this point. Can't see behind gear enough to see if there
is
> a clip, and books don't say there is, so any ideas?
>
>
--
Posted via a free Usenet account from http://www.teranews.com
http://www.----------.com/temp/tChain4cyl.pdf
God Bless America, Bill 0|||||||0
mailto:--------------------
"Greg" <greglc84@hotmail.com> wrote in message
news:qgQOh.86895$zU1.70822@pd7urf1no...
> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
have
> everything off to do it, but can't get large gear off, they both slide out
> easily about 3/4" then large one stops dead, you can acually slide it back
> and forth making it clunk. We have Hayne and full shop manuals, we've
> followed them to this point. Can't see behind gear enough to see if there
is
> a clip, and books don't say there is, so any ideas?
>
>
--
Posted via a free Usenet account from http://www.teranews.com
#29
Guest
Posts: n/a
Re: 95 YJ timing chain questions
Is it a special puller? And yes we are removing all as a unit.
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:460c21c2$0$16396$88260bb3@free.teranews.com.. .
> It uses a pin rather than a key, and is very narrow on the cam, meaning
> it must be like a press fit to keep from whopping and wearing out:
> http://www.----------.com/temp/tSprocket4cyl.jpg Use a puller.
> God Bless America, Bill 0|||||||0
> mailto:--------------------
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:qgQOh.86895$zU1.70822@pd7urf1no...
>> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
> have
>> everything off to do it, but can't get large gear off, they both slide
>> out
>> easily about 3/4" then large one stops dead, you can acually slide it
>> back
>> and forth making it clunk. We have Hayne and full shop manuals, we've
>> followed them to this point. Can't see behind gear enough to see if there
> is
>> a clip, and books don't say there is, so any ideas?
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:460c21c2$0$16396$88260bb3@free.teranews.com.. .
> It uses a pin rather than a key, and is very narrow on the cam, meaning
> it must be like a press fit to keep from whopping and wearing out:
> http://www.----------.com/temp/tSprocket4cyl.jpg Use a puller.
> God Bless America, Bill 0|||||||0
> mailto:--------------------
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:qgQOh.86895$zU1.70822@pd7urf1no...
>> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
> have
>> everything off to do it, but can't get large gear off, they both slide
>> out
>> easily about 3/4" then large one stops dead, you can acually slide it
>> back
>> and forth making it clunk. We have Hayne and full shop manuals, we've
>> followed them to this point. Can't see behind gear enough to see if there
> is
>> a clip, and books don't say there is, so any ideas?
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
#30
Guest
Posts: n/a
Re: 95 YJ timing chain questions
Is it a special puller? And yes we are removing all as a unit.
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:460c21c2$0$16396$88260bb3@free.teranews.com.. .
> It uses a pin rather than a key, and is very narrow on the cam, meaning
> it must be like a press fit to keep from whopping and wearing out:
> http://www.----------.com/temp/tSprocket4cyl.jpg Use a puller.
> God Bless America, Bill 0|||||||0
> mailto:--------------------
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:qgQOh.86895$zU1.70822@pd7urf1no...
>> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
> have
>> everything off to do it, but can't get large gear off, they both slide
>> out
>> easily about 3/4" then large one stops dead, you can acually slide it
>> back
>> and forth making it clunk. We have Hayne and full shop manuals, we've
>> followed them to this point. Can't see behind gear enough to see if there
> is
>> a clip, and books don't say there is, so any ideas?
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:460c21c2$0$16396$88260bb3@free.teranews.com.. .
> It uses a pin rather than a key, and is very narrow on the cam, meaning
> it must be like a press fit to keep from whopping and wearing out:
> http://www.----------.com/temp/tSprocket4cyl.jpg Use a puller.
> God Bless America, Bill 0|||||||0
> mailto:--------------------
>
> "Greg" <greglc84@hotmail.com> wrote in message
> news:qgQOh.86895$zU1.70822@pd7urf1no...
>> Daughter is replacing her timing chain/gears on her 95 YJ, 2.5 L, we
> have
>> everything off to do it, but can't get large gear off, they both slide
>> out
>> easily about 3/4" then large one stops dead, you can acually slide it
>> back
>> and forth making it clunk. We have Hayne and full shop manuals, we've
>> followed them to this point. Can't see behind gear enough to see if there
> is
>> a clip, and books don't say there is, so any ideas?
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>