On Tue, 05 Apr 2005 13:04:01 GMT, Marvin Oliver wrote:
> Is this not making it to the news group or is there no comment worth
> posting?

My comment on this isn't worth posting: "I don't know".

Sorry I can't be more helpful.

-D

--
One OS to rule them all, one OS to find them,
One OS to bring them all and in the darkness bind them,
In the Land of Redmond, where the Shadows lie.

www: http://dman13.dyndns.org/~dman/ jabber: dman@dman13.dyndns.org

 

On Tue, 05 Apr 2005 13:04:01 GMT, Marvin Oliver wrote:
> Is this not making it to the news group or is there no comment worth
> posting?

My comment on this isn't worth posting: "I don't know".

Sorry I can't be more helpful.

-D

--
One OS to rule them all, one OS to find them,
One OS to bring them all and in the darkness bind them,
In the Land of Redmond, where the Shadows lie.

www: http://dman13.dyndns.org/~dman/ jabber: dman@dman13.dyndns.org

 

On Tue, 05 Apr 2005 13:04:01 GMT, Marvin Oliver wrote:
> Is this not making it to the news group or is there no comment worth
> posting?

My comment on this isn't worth posting: "I don't know".

Sorry I can't be more helpful.

-D

--
One OS to rule them all, one OS to find them,
One OS to bring them all and in the darkness bind them,
In the Land of Redmond, where the Shadows lie.

www: http://dman13.dyndns.org/~dman/ jabber: dman@dman13.dyndns.org

 

Thanx for the reply. I just like to be sure I'm not way off in left field or
maybe not even on the field anymore.

I did find a fellow who will rebuild it for $150 plus parts. This seems
awful cheap but he was recommended by the owner of a transmission shop I
have had a long relationship with and trust entirely.

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4252930C.FA35276C@sympatico.ca...
> No one really had the heart to tell you what you already have figured
> likely....
>
> That t-case was a chain drive one so at the 'best' you are looking at a
> new chain and sprockets.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Marvin Oliver wrote:
>>
>> Is this not making it to the news group or is there no comment worth
>> posting?
>>
>> "Marvin Oliver" <m3599137@earthlink.net> wrote in message
>> news:EMY3e.4610$x4.717@newsread1.news.pas.earthlin k.net...
>>
>> > Yesterday found out the hard way I don't have 4wd. Today checked front
>> > axle vacuum motor and found it engages. With all four wheels off the
>> > ground I engaged 4L and put transmission in gear. While the rear
>> > wheels
>> > spun the front wheels do not spin. I notice the front drive shaft was
>> > slowly rotating, but I cound easily stop it with by hand. Same results
>> > for
>> > 4H. I adjusted the linkage just to be sure.
>> >
>> > I have the np231 J xfer case. Is the xfer case bad? Is there a possible
>> > simple fix or do I replace it with a rebuilt? Is there a suggested
>> > upgrade? I just mess around on the back roads in Big Bear area.
>> >

 

Thanx for the reply. I just like to be sure I'm not way off in left field or
maybe not even on the field anymore.

I did find a fellow who will rebuild it for $150 plus parts. This seems
awful cheap but he was recommended by the owner of a transmission shop I
have had a long relationship with and trust entirely.

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4252930C.FA35276C@sympatico.ca...
> No one really had the heart to tell you what you already have figured
> likely....
>
> That t-case was a chain drive one so at the 'best' you are looking at a
> new chain and sprockets.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Marvin Oliver wrote:
>>
>> Is this not making it to the news group or is there no comment worth
>> posting?
>>
>> "Marvin Oliver" <m3599137@earthlink.net> wrote in message
>> news:EMY3e.4610$x4.717@newsread1.news.pas.earthlin k.net...
>>
>> > Yesterday found out the hard way I don't have 4wd. Today checked front
>> > axle vacuum motor and found it engages. With all four wheels off the
>> > ground I engaged 4L and put transmission in gear. While the rear
>> > wheels
>> > spun the front wheels do not spin. I notice the front drive shaft was
>> > slowly rotating, but I cound easily stop it with by hand. Same results
>> > for
>> > 4H. I adjusted the linkage just to be sure.
>> >
>> > I have the np231 J xfer case. Is the xfer case bad? Is there a possible
>> > simple fix or do I replace it with a rebuilt? Is there a suggested
>> > upgrade? I just mess around on the back roads in Big Bear area.
>> >

 

Thanx for the reply. I just like to be sure I'm not way off in left field or
maybe not even on the field anymore.

I did find a fellow who will rebuild it for $150 plus parts. This seems
awful cheap but he was recommended by the owner of a transmission shop I
have had a long relationship with and trust entirely.

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4252930C.FA35276C@sympatico.ca...
> No one really had the heart to tell you what you already have figured
> likely....
>
> That t-case was a chain drive one so at the 'best' you are looking at a
> new chain and sprockets.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Marvin Oliver wrote:
>>
>> Is this not making it to the news group or is there no comment worth
>> posting?
>>
>> "Marvin Oliver" <m3599137@earthlink.net> wrote in message
>> news:EMY3e.4610$x4.717@newsread1.news.pas.earthlin k.net...
>>
>> > Yesterday found out the hard way I don't have 4wd. Today checked front
>> > axle vacuum motor and found it engages. With all four wheels off the
>> > ground I engaged 4L and put transmission in gear. While the rear
>> > wheels
>> > spun the front wheels do not spin. I notice the front drive shaft was
>> > slowly rotating, but I cound easily stop it with by hand. Same results
>> > for
>> > 4H. I adjusted the linkage just to be sure.
>> >
>> > I have the np231 J xfer case. Is the xfer case bad? Is there a possible
>> > simple fix or do I replace it with a rebuilt? Is there a suggested
>> > upgrade? I just mess around on the back roads in Big Bear area.
>> >

 

Thanx for the reply. I just like to be sure I'm not way off in left field or
maybe not even on the field anymore.

I did find a fellow who will rebuild it for $150 plus parts. This seems
awful cheap but he was recommended by the owner of a transmission shop I
have had a long relationship with and trust entirely.

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4252930C.FA35276C@sympatico.ca...
> No one really had the heart to tell you what you already have figured
> likely....
>
> That t-case was a chain drive one so at the 'best' you are looking at a
> new chain and sprockets.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Marvin Oliver wrote:
>>
>> Is this not making it to the news group or is there no comment worth
>> posting?
>>
>> "Marvin Oliver" <m3599137@earthlink.net> wrote in message
>> news:EMY3e.4610$x4.717@newsread1.news.pas.earthlin k.net...
>>
>> > Yesterday found out the hard way I don't have 4wd. Today checked front
>> > axle vacuum motor and found it engages. With all four wheels off the
>> > ground I engaged 4L and put transmission in gear. While the rear
>> > wheels
>> > spun the front wheels do not spin. I notice the front drive shaft was
>> > slowly rotating, but I cound easily stop it with by hand. Same results
>> > for
>> > 4H. I adjusted the linkage just to be sure.
>> >
>> > I have the np231 J xfer case. Is the xfer case bad? Is there a possible
>> > simple fix or do I replace it with a rebuilt? Is there a suggested
>> > upgrade? I just mess around on the back roads in Big Bear area.
>> >