Kapper94 proclaimed:

> On Jun 26, 12:22 pm, RoyJ <spaml...@microsoft.net> wrote:
>
>>Make sure you have the proper gear lube in the tranny. Flush and bleed
>>the clutch hydraulic system.
>>
>>If those are OK, you have a problem with the clutch or the tranny. Quick
>>test: put tranny in neutral, clutch out, rev to 1500 rpnm or so. Push
>>the clutch in, wait for 5 seconds, try to put it in reverse (no synchros
>>here). If it goes in quietly, good chance you have bad synchros on 4th
>>gear. $$$$$$ for tranny work. If it grinds the gears going into reverse,
>>the clutch is not disengaging fully. Look at bad master, slave, or
>>clutch plate.
>>
>>Mileage and engine would help.
>>
>>
>
>
> Odometer reads 108k.
> I'll try that tonight. If it acts like the bad Synchros scenario you
> described, is something an average guy could do with a manual in his
> gerage?
>
Not rocket science. You'll want a good jack or some really strong
buddies. If you swap the transmission, might as well redo the clutch
while it is apart. Probably need a pilot tool, some places rent them
but not hard to buy--used to align everything when you put it together
to avoid vibration.

If it is the tranny, see if you can identify the model transmission and
ask here if the old Redline trick might keep it running for a while.

 

On Tue, 26 Jun 2007 15:26:55 -0700, "L.W. \(Bill\) ------ III"
<----------@***.net> wrote:

> Nope, no one makes a puny 9" clutch disk to fit the NV3550 nor AX15:


No, it is quite doable to install a AX15 in place of a AX5. Check out
link below

http://forum.snoman.com/viewtopic.php?t=240
-----------------
TheSnoMan.com

 

On Tue, 26 Jun 2007 15:26:55 -0700, "L.W. \(Bill\) ------ III"
<----------@***.net> wrote:

> Nope, no one makes a puny 9" clutch disk to fit the NV3550 nor AX15:


No, it is quite doable to install a AX15 in place of a AX5. Check out
link below

http://forum.snoman.com/viewtopic.php?t=240
-----------------
TheSnoMan.com

 

On Tue, 26 Jun 2007 15:26:55 -0700, "L.W. \(Bill\) ------ III"
<----------@***.net> wrote:

> Nope, no one makes a puny 9" clutch disk to fit the NV3550 nor AX15:


No, it is quite doable to install a AX15 in place of a AX5. Check out
link below

http://forum.snoman.com/viewtopic.php?t=240
-----------------
TheSnoMan.com

 

On Tue, 26 Jun 2007 15:26:55 -0700, "L.W. \(Bill\) ------ III"
<----------@***.net> wrote:

> Nope, no one makes a puny 9" clutch disk to fit the NV3550 nor AX15:


No, it is quite doable to install a AX15 in place of a AX5. Check out
link below

http://forum.snoman.com/viewtopic.php?t=240
-----------------
TheSnoMan.com

 

Correction: http://www.jeeps-offroad.com/articles/ax15swap.php
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/


"Kapper94" <otten.kap@gmail.com> wrote in message
news:1182893374.648153.154630@i38g2000prf.googlegr oups.com...
>
>
> I have the 4cyl. Will the NV3550 be a direct bolt replacement for the
> AX5? I'm beginning to have some buyers remorse.
> Thanks for the help.
>



--
Posted via a free Usenet account from http://www.teranews.com

 

Correction: http://www.jeeps-offroad.com/articles/ax15swap.php
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/


"Kapper94" <otten.kap@gmail.com> wrote in message
news:1182893374.648153.154630@i38g2000prf.googlegr oups.com...
>
>
> I have the 4cyl. Will the NV3550 be a direct bolt replacement for the
> AX5? I'm beginning to have some buyers remorse.
> Thanks for the help.
>



--
Posted via a free Usenet account from http://www.teranews.com

 

Correction: http://www.jeeps-offroad.com/articles/ax15swap.php
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/


"Kapper94" <otten.kap@gmail.com> wrote in message
news:1182893374.648153.154630@i38g2000prf.googlegr oups.com...
>
>
> I have the 4cyl. Will the NV3550 be a direct bolt replacement for the
> AX5? I'm beginning to have some buyers remorse.
> Thanks for the help.
>



--
Posted via a free Usenet account from http://www.teranews.com

 

Correction: http://www.jeeps-offroad.com/articles/ax15swap.php
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/


"Kapper94" <otten.kap@gmail.com> wrote in message
news:1182893374.648153.154630@i38g2000prf.googlegr oups.com...
>
>
> I have the 4cyl. Will the NV3550 be a direct bolt replacement for the
> AX5? I'm beginning to have some buyers remorse.
> Thanks for the help.
>



--
Posted via a free Usenet account from http://www.teranews.com

 

Kapper94 wrote:
> Hey Guys,
>
> I just a bought a 94 wrangler and now it grinds when shifitng into
> 4th. What should I check before I refinance my house to pay a
> professional to fix it. Any and all help or suggestions are greatly
> appreciated. This is my first Jeep. Thanks
>
> Kap
>

They are extremely picky about the correct transmission fluid in them,
even for a top up.

If someone even topped it up with the wrong grade fluid, the syncros
will act like they are dying. If it is a little low in fluid, same thing.

The cheapest and easiest thing to do would be a fluid change, then you
know for sure that isn't the issue.

It is 'very' unusual for the tranny to go out on a 4 banger, but can
happen. It 'sure' isn't worth jury rigging something else to fit when
there are tons of them on the road so the wreckers should have good used
one if you aren't up to a rebuild.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's - Gone to the rust pile...
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)