93 YJ front hub Removal
11-19-2003, 08:05 PM
#1
Guest
Posts: n/a
93 YJ front hub Removal
Anyone know what size socket I will need to get the axel nuts off my 93 YJ
wrangler? I need to pull the hubs so that I can replace the universals.
Did this once about 6 years ago, just cant remember what size the nut was.
36mm seems to come to mind but not sure.
Thanks
Cliff
wrangler? I need to pull the hubs so that I can replace the universals.
Did this once about 6 years ago, just cant remember what size the nut was.
36mm seems to come to mind but not sure.
Thanks
Cliff
11-19-2003, 08:28 PM
#2
Guest
Posts: n/a
Re: 93 YJ front hub Removal
2 1/16
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Cliff" <cliff344@apk.net> wrote in message
news:bph40u$ano$1@plonk.apk.net...
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
>
>
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Cliff" <cliff344@apk.net> wrote in message
news:bph40u$ano$1@plonk.apk.net...
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
>
>
11-19-2003, 08:28 PM
#3
Guest
Posts: n/a
Re: 93 YJ front hub Removal
2 1/16
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Cliff" <cliff344@apk.net> wrote in message
news:bph40u$ano$1@plonk.apk.net...
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
>
>
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Cliff" <cliff344@apk.net> wrote in message
news:bph40u$ano$1@plonk.apk.net...
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
>
>
11-19-2003, 08:28 PM
#4
Guest
Posts: n/a
Re: 93 YJ front hub Removal
2 1/16
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Cliff" <cliff344@apk.net> wrote in message
news:bph40u$ano$1@plonk.apk.net...
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
>
>
--
JimG
80' CJ-7 258 CID
35" BFG MT on 15x10 Centerlines
D44 Rear, Dana 30 Front. SOA
4.56 Gears, LockRight F&R
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
"Cliff" <cliff344@apk.net> wrote in message
news:bph40u$ano$1@plonk.apk.net...
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
>
>
11-19-2003, 08:55 PM
#5
Guest
Posts: n/a
Re: 93 YJ front hub Removal
You are right:
http://www.madxj.com/MADXJ/technical...97andSeals.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Cliff wrote:
>
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
http://www.madxj.com/MADXJ/technical...97andSeals.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Cliff wrote:
>
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
11-19-2003, 08:55 PM
#6
Guest
Posts: n/a
Re: 93 YJ front hub Removal
You are right:
http://www.madxj.com/MADXJ/technical...97andSeals.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Cliff wrote:
>
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
http://www.madxj.com/MADXJ/technical...97andSeals.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Cliff wrote:
>
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
11-19-2003, 08:55 PM
#7
Guest
Posts: n/a
Re: 93 YJ front hub Removal
You are right:
http://www.madxj.com/MADXJ/technical...97andSeals.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Cliff wrote:
>
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
http://www.madxj.com/MADXJ/technical...97andSeals.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Cliff wrote:
>
> Anyone know what size socket I will need to get the axel nuts off my 93 YJ
> wrangler? I need to pull the hubs so that I can replace the universals.
> Did this once about 6 years ago, just cant remember what size the nut was.
> 36mm seems to come to mind but not sure.
>
> Thanks
> Cliff
11-19-2003, 08:57 PM
#8
Guest
Posts: n/a
Re: 93 YJ front hub Removal
Cliff's YJ doesn't have Real hubs with floating bearings.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
JimG wrote:
>
> 2 1/16
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
JimG wrote:
>
> 2 1/16
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
11-19-2003, 08:57 PM
#9
Guest
Posts: n/a
Re: 93 YJ front hub Removal
Cliff's YJ doesn't have Real hubs with floating bearings.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
JimG wrote:
>
> 2 1/16
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
JimG wrote:
>
> 2 1/16
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
11-19-2003, 08:57 PM
#10
Guest
Posts: n/a
Re: 93 YJ front hub Removal
Cliff's YJ doesn't have Real hubs with floating bearings.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
JimG wrote:
>
> 2 1/16
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
JimG wrote:
>
> 2 1/16
>
> --
> JimG
> 80' CJ-7 258 CID
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, Dana 30 Front. SOA
> 4.56 Gears, LockRight F&R
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
