Walt Barie

Well unfortunately I found out that the power locks will not lock
without the module in place. That little module does a bunch of things.
It was warmer today and the buzzer worked fine. So it looks like some
further debugging of the wiring is in order:(

Walt B.


Matt wrote:
> The underseat sensor harness under my TJ seat got caught in a seat
> cover fastener, dragged onto the seat track, and crushed when I pushed
> the seat back. Now that stupid buzzer NEVER rings-when starting or
> otherwise! I say rip it out, if it's the same as mine.
>
> Matt
>
>
>
>
>
>
>>So my question is...Is there a buzzer module that I can remove to stop
>>the incessant electronic buzz? And if so does anyone know were it is
>>located? With the winter coming I don't think that I can take the
>>buzzer buzzing 10 minutes every morning.
>>
>>Walt B.

DougW

Walt Barie did pass the time by typing:
> Well unfortunately I found out that the power locks will not lock
> without the module in place. That little module does a bunch of things.
> It was warmer today and the buzzer worked fine. So it looks like some
> further debugging of the wiring is in order:(

Annoying isn't it.


You can bypass the door interlock. Just put a jumper between pin C5 and
ground (C3). The wire is a 20 Gauge Yellow with Black stripe.

Double check the pins with a volt meter. The schematic in my service
book has errors. To test I'd put an ammeter between those pins to protect
against any errors before using a solid wire.

Door unlock and lock relays are located in the glove box under that little
panel.

Hold on a sec and I'll get you something to help.

--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!

DougW

Walt Barie did pass the time by typing:
> Well unfortunately I found out that the power locks will not lock
> without the module in place. That little module does a bunch of things.
> It was warmer today and the buzzer worked fine. So it looks like some
> further debugging of the wiring is in order:(

Annoying isn't it.


You can bypass the door interlock. Just put a jumper between pin C5 and
ground (C3). The wire is a 20 Gauge Yellow with Black stripe.

Double check the pins with a volt meter. The schematic in my service
book has errors. To test I'd put an ammeter between those pins to protect
against any errors before using a solid wire.

Door unlock and lock relays are located in the glove box under that little
panel.

Hold on a sec and I'll get you something to help.

--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!

DougW

DougW did pass the time by typing:

> Hold on a sec and I'll get you something to help.

Hot off the press. They will only be up for a day
before the temp directory gets purged.

http://members.***.net/douglas.wilson/temp/ZJ-23.jpg
http://members.***.net/douglas.wilson/temp/ZJ-24.jpg
http://members.***.net/douglas.wilson/temp/ZJ-83.jpg
http://members.***.net/douglas.wilson/temp/ZJ-84.jpg


--
DougW

DougW

DougW did pass the time by typing:

> Hold on a sec and I'll get you something to help.

Hot off the press. They will only be up for a day
before the temp directory gets purged.

http://members.***.net/douglas.wilson/temp/ZJ-23.jpg
http://members.***.net/douglas.wilson/temp/ZJ-24.jpg
http://members.***.net/douglas.wilson/temp/ZJ-83.jpg
http://members.***.net/douglas.wilson/temp/ZJ-84.jpg


--
DougW

Walt Barie

Thank you, I got them.

Walt B.

DougW wrote:
> DougW did pass the time by typing:
>
>
>>Hold on a sec and I'll get you something to help.
>
>
> Hot off the press. They will only be up for a day
> before the temp directory gets purged.
>
> http://members.***.net/douglas.wilson/temp/ZJ-23.jpg
> http://members.***.net/douglas.wilson/temp/ZJ-24.jpg
> http://members.***.net/douglas.wilson/temp/ZJ-83.jpg
> http://members.***.net/douglas.wilson/temp/ZJ-84.jpg
>
>
> --
> DougW
>
>

Walt Barie

Thank you, I got them.

Walt B.

DougW wrote:
> DougW did pass the time by typing:
>
>
>>Hold on a sec and I'll get you something to help.
>
>
> Hot off the press. They will only be up for a day
> before the temp directory gets purged.
>
> http://members.***.net/douglas.wilson/temp/ZJ-23.jpg
> http://members.***.net/douglas.wilson/temp/ZJ-24.jpg
> http://members.***.net/douglas.wilson/temp/ZJ-83.jpg
> http://members.***.net/douglas.wilson/temp/ZJ-84.jpg
>
>
> --
> DougW
>
>

DougW

Walt Barie did pass the time by typing:
> Thank you, I got them.

Hope they help.

--
DougW

DougW

Walt Barie did pass the time by typing:
> Thank you, I got them.

Hope they help.

--
DougW