So do I. But I have seen them short and create a good sized fire.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Earle Horton wrote:
>
> I liked the old switches, with the one-eighth inch pipe thread, that fit in
> the hydraulic line. Every ten years or so, they would start to leak and
> make the wires turn green, but what the heck. You only needed one
> replacement part, to fit all vehicles.
>
> Earle

 

So do I. But I have seen them short and create a good sized fire.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Earle Horton wrote:
>
> I liked the old switches, with the one-eighth inch pipe thread, that fit in
> the hydraulic line. Every ten years or so, they would start to leak and
> make the wires turn green, but what the heck. You only needed one
> replacement part, to fit all vehicles.
>
> Earle

 

So do I. But I have seen them short and create a good sized fire.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Earle Horton wrote:
>
> I liked the old switches, with the one-eighth inch pipe thread, that fit in
> the hydraulic line. Every ten years or so, they would start to leak and
> make the wires turn green, but what the heck. You only needed one
> replacement part, to fit all vehicles.
>
> Earle

 

Well while looking for the fuse I found the problem:

The brake light switch on the brake pedal had 2 sets of wires coming off,
one of them were the crimped connectors to 2 wires coming out of the wiring
harness, had been cut short and were hard to work with. Drove it home and
when I got out the rear lights wouldn't go out. Disconnected the other pair
of wires and they went out. They still work though. What were those 2
wires for?

Troy

 

Well while looking for the fuse I found the problem:

The brake light switch on the brake pedal had 2 sets of wires coming off,
one of them were the crimped connectors to 2 wires coming out of the wiring
harness, had been cut short and were hard to work with. Drove it home and
when I got out the rear lights wouldn't go out. Disconnected the other pair
of wires and they went out. They still work though. What were those 2
wires for?

Troy

 

Well while looking for the fuse I found the problem:

The brake light switch on the brake pedal had 2 sets of wires coming off,
one of them were the crimped connectors to 2 wires coming out of the wiring
harness, had been cut short and were hard to work with. Drove it home and
when I got out the rear lights wouldn't go out. Disconnected the other pair
of wires and they went out. They still work though. What were those 2
wires for?

Troy