Recently Purchased a 89 comanche. Some jackass messed with the wiring, and I
have no interior lights. It is not the fuse, that I know. Any sugestions
before I have to remove all of the interior.

Patrick Ellis

 

Hi Patrick,
Did you spin the light switch's **** to see if the last owner just
disconnected the door buttons? Check to see if the door buttons are
covered with a lever, a trick I use.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

geoconno wrote:
>
> Recently Purchased a 89 comanche. Some jackass messed with the wiring, and I
> have no interior lights. It is not the fuse, that I know. Any sugestions
> before I have to remove all of the interior.
>
> Patrick Ellis

 

Hi Patrick,
Did you spin the light switch's **** to see if the last owner just
disconnected the door buttons? Check to see if the door buttons are
covered with a lever, a trick I use.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

geoconno wrote:
>
> Recently Purchased a 89 comanche. Some jackass messed with the wiring, and I
> have no interior lights. It is not the fuse, that I know. Any sugestions
> before I have to remove all of the interior.
>
> Patrick Ellis

 

Hi Patrick,
Did you spin the light switch's **** to see if the last owner just
disconnected the door buttons? Check to see if the door buttons are
covered with a lever, a trick I use.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

geoconno wrote:
>
> Recently Purchased a 89 comanche. Some jackass messed with the wiring, and I
> have no interior lights. It is not the fuse, that I know. Any sugestions
> before I have to remove all of the interior.
>
> Patrick Ellis

 

If the 89 used the same lights as the 88 (likely) I would suspect the
light itself first. Mine has the long, narrow lights that rotate thru
3 positions by moving the lense - up, center, down. Up connects them
to the door switch, center is always off, down is hot on. Inside is a
cheesy switch that quits making contact when the pivots wear. I had
to drill mine and put in steel pivot pins to get them to work.

On Wed, 5 Nov 2003 17:47:07 UTC "geoconno" <geoconno@insightbb.com>
wrote:

> Recently Purchased a 89 comanche. Some jackass messed with the wiring, and I
> have no interior lights. It is not the fuse, that I know. Any sugestions
> before I have to remove all of the interior.
>
> Patrick Ellis
>
>


--
Will Honea <whonea@codenet.net>

 

If the 89 used the same lights as the 88 (likely) I would suspect the
light itself first. Mine has the long, narrow lights that rotate thru
3 positions by moving the lense - up, center, down. Up connects them
to the door switch, center is always off, down is hot on. Inside is a
cheesy switch that quits making contact when the pivots wear. I had
to drill mine and put in steel pivot pins to get them to work.

On Wed, 5 Nov 2003 17:47:07 UTC "geoconno" <geoconno@insightbb.com>
wrote:

> Recently Purchased a 89 comanche. Some jackass messed with the wiring, and I
> have no interior lights. It is not the fuse, that I know. Any sugestions
> before I have to remove all of the interior.
>
> Patrick Ellis
>
>


--
Will Honea <whonea@codenet.net>

 

If the 89 used the same lights as the 88 (likely) I would suspect the
light itself first. Mine has the long, narrow lights that rotate thru
3 positions by moving the lense - up, center, down. Up connects them
to the door switch, center is always off, down is hot on. Inside is a
cheesy switch that quits making contact when the pivots wear. I had
to drill mine and put in steel pivot pins to get them to work.

On Wed, 5 Nov 2003 17:47:07 UTC "geoconno" <geoconno@insightbb.com>
wrote:

> Recently Purchased a 89 comanche. Some jackass messed with the wiring, and I
> have no interior lights. It is not the fuse, that I know. Any sugestions
> before I have to remove all of the interior.
>
> Patrick Ellis
>
>


--
Will Honea <whonea@codenet.net>