4.0 manifold crack !
#11
Guest
Posts: n/a
Re: 4.0 manifold crack !
be aware there is a class action suit going on right now for tj manifold
cracks and it applies to your '97. see
http://7slotgrille.com/forum/topic.asp?TOPIC_ID=1217
go get paid.
--
Nathan W. Collier
http://UtilityOffRoad.com
http://7SlotGrille.com
"....a talking bird is a freak" - Mr. Ed
"casca" <casca@megsinet.net> wrote in message
news:1095vsmj4o3qcc8@corp.supernews.com...
> have a 97 TJ with 4.0 a crack above the flange.
>
> need some ideas- tips -recommendations
>
> weld it ?
> aftermarket ?
> header ?
>
> what have some of you done, did it work and for how long did it last ?
>
> again thanks
> casca
>
>
cracks and it applies to your '97. see
http://7slotgrille.com/forum/topic.asp?TOPIC_ID=1217
go get paid.
--
Nathan W. Collier
http://UtilityOffRoad.com
http://7SlotGrille.com
"....a talking bird is a freak" - Mr. Ed
"casca" <casca@megsinet.net> wrote in message
news:1095vsmj4o3qcc8@corp.supernews.com...
> have a 97 TJ with 4.0 a crack above the flange.
>
> need some ideas- tips -recommendations
>
> weld it ?
> aftermarket ?
> header ?
>
> what have some of you done, did it work and for how long did it last ?
>
> again thanks
> casca
>
>
#12
Guest
Posts: n/a
Re: 4.0 manifold crack !
be aware there is a class action suit going on right now for tj manifold
cracks and it applies to your '97. see
http://7slotgrille.com/forum/topic.asp?TOPIC_ID=1217
go get paid.
--
Nathan W. Collier
http://UtilityOffRoad.com
http://7SlotGrille.com
"....a talking bird is a freak" - Mr. Ed
"casca" <casca@megsinet.net> wrote in message
news:1095vsmj4o3qcc8@corp.supernews.com...
> have a 97 TJ with 4.0 a crack above the flange.
>
> need some ideas- tips -recommendations
>
> weld it ?
> aftermarket ?
> header ?
>
> what have some of you done, did it work and for how long did it last ?
>
> again thanks
> casca
>
>
cracks and it applies to your '97. see
http://7slotgrille.com/forum/topic.asp?TOPIC_ID=1217
go get paid.
--
Nathan W. Collier
http://UtilityOffRoad.com
http://7SlotGrille.com
"....a talking bird is a freak" - Mr. Ed
"casca" <casca@megsinet.net> wrote in message
news:1095vsmj4o3qcc8@corp.supernews.com...
> have a 97 TJ with 4.0 a crack above the flange.
>
> need some ideas- tips -recommendations
>
> weld it ?
> aftermarket ?
> header ?
>
> what have some of you done, did it work and for how long did it last ?
>
> again thanks
> casca
>
>
#13
Guest
Posts: n/a
Re: 4.0 manifold crack !
be aware there is a class action suit going on right now for tj manifold
cracks and it applies to your '97. see
http://7slotgrille.com/forum/topic.asp?TOPIC_ID=1217
go get paid.
--
Nathan W. Collier
http://UtilityOffRoad.com
http://7SlotGrille.com
"....a talking bird is a freak" - Mr. Ed
"casca" <casca@megsinet.net> wrote in message
news:1095vsmj4o3qcc8@corp.supernews.com...
> have a 97 TJ with 4.0 a crack above the flange.
>
> need some ideas- tips -recommendations
>
> weld it ?
> aftermarket ?
> header ?
>
> what have some of you done, did it work and for how long did it last ?
>
> again thanks
> casca
>
>
cracks and it applies to your '97. see
http://7slotgrille.com/forum/topic.asp?TOPIC_ID=1217
go get paid.
--
Nathan W. Collier
http://UtilityOffRoad.com
http://7SlotGrille.com
"....a talking bird is a freak" - Mr. Ed
"casca" <casca@megsinet.net> wrote in message
news:1095vsmj4o3qcc8@corp.supernews.com...
> have a 97 TJ with 4.0 a crack above the flange.
>
> need some ideas- tips -recommendations
>
> weld it ?
> aftermarket ?
> header ?
>
> what have some of you done, did it work and for how long did it last ?
>
> again thanks
> casca
>
>
#14
Guest
Posts: n/a
Re: 4.0 manifold crack !
I put a Borla header on a friend's '97 that had cracked. Installation was
about what i expected, took close to six hours. Only problem i had was i
didn't torque the manifold bolts enough, had an incredibly high idle when i
started it. Sounded better than stock (NO MORE TICKING!!!!) and gave some pep
to the low-end. Cost more than the other headers, but i only wanted to do the
job once.
Don W
'82 CJ8 Scrambler
AMC 360
T/F 727
Dana 300
One-piece model 20 rear
Dana 30 front, upgraded to 6-bolt caliper and Warn hubs, awaiting locker
2" shackle lift/reversal
2" lift springs of unknown origin
33" Mickey's
And it finally runs!!!!!
about what i expected, took close to six hours. Only problem i had was i
didn't torque the manifold bolts enough, had an incredibly high idle when i
started it. Sounded better than stock (NO MORE TICKING!!!!) and gave some pep
to the low-end. Cost more than the other headers, but i only wanted to do the
job once.
Don W
'82 CJ8 Scrambler
AMC 360
T/F 727
Dana 300
One-piece model 20 rear
Dana 30 front, upgraded to 6-bolt caliper and Warn hubs, awaiting locker
2" shackle lift/reversal
2" lift springs of unknown origin
33" Mickey's
And it finally runs!!!!!
#15
Guest
Posts: n/a
Re: 4.0 manifold crack !
I put a Borla header on a friend's '97 that had cracked. Installation was
about what i expected, took close to six hours. Only problem i had was i
didn't torque the manifold bolts enough, had an incredibly high idle when i
started it. Sounded better than stock (NO MORE TICKING!!!!) and gave some pep
to the low-end. Cost more than the other headers, but i only wanted to do the
job once.
Don W
'82 CJ8 Scrambler
AMC 360
T/F 727
Dana 300
One-piece model 20 rear
Dana 30 front, upgraded to 6-bolt caliper and Warn hubs, awaiting locker
2" shackle lift/reversal
2" lift springs of unknown origin
33" Mickey's
And it finally runs!!!!!
about what i expected, took close to six hours. Only problem i had was i
didn't torque the manifold bolts enough, had an incredibly high idle when i
started it. Sounded better than stock (NO MORE TICKING!!!!) and gave some pep
to the low-end. Cost more than the other headers, but i only wanted to do the
job once.
Don W
'82 CJ8 Scrambler
AMC 360
T/F 727
Dana 300
One-piece model 20 rear
Dana 30 front, upgraded to 6-bolt caliper and Warn hubs, awaiting locker
2" shackle lift/reversal
2" lift springs of unknown origin
33" Mickey's
And it finally runs!!!!!
#16
Guest
Posts: n/a
Re: 4.0 manifold crack !
I put a Borla header on a friend's '97 that had cracked. Installation was
about what i expected, took close to six hours. Only problem i had was i
didn't torque the manifold bolts enough, had an incredibly high idle when i
started it. Sounded better than stock (NO MORE TICKING!!!!) and gave some pep
to the low-end. Cost more than the other headers, but i only wanted to do the
job once.
Don W
'82 CJ8 Scrambler
AMC 360
T/F 727
Dana 300
One-piece model 20 rear
Dana 30 front, upgraded to 6-bolt caliper and Warn hubs, awaiting locker
2" shackle lift/reversal
2" lift springs of unknown origin
33" Mickey's
And it finally runs!!!!!
about what i expected, took close to six hours. Only problem i had was i
didn't torque the manifold bolts enough, had an incredibly high idle when i
started it. Sounded better than stock (NO MORE TICKING!!!!) and gave some pep
to the low-end. Cost more than the other headers, but i only wanted to do the
job once.
Don W
'82 CJ8 Scrambler
AMC 360
T/F 727
Dana 300
One-piece model 20 rear
Dana 30 front, upgraded to 6-bolt caliper and Warn hubs, awaiting locker
2" shackle lift/reversal
2" lift springs of unknown origin
33" Mickey's
And it finally runs!!!!!
#17
Guest
Posts: n/a
Re: 4.0 manifold crack !
I put a Borla header on a friend's '97 that had cracked. Installation was
about what i expected, took close to six hours. Only problem i had was i
didn't torque the manifold bolts enough, had an incredibly high idle when i
started it. Sounded better than stock (NO MORE TICKING!!!!) and gave some pep
to the low-end. Cost more than the other headers, but i only wanted to do the
job once.
Don W
'82 CJ8 Scrambler
AMC 360
T/F 727
Dana 300
One-piece model 20 rear
Dana 30 front, upgraded to 6-bolt caliper and Warn hubs, awaiting locker
2" shackle lift/reversal
2" lift springs of unknown origin
33" Mickey's
And it finally runs!!!!!
about what i expected, took close to six hours. Only problem i had was i
didn't torque the manifold bolts enough, had an incredibly high idle when i
started it. Sounded better than stock (NO MORE TICKING!!!!) and gave some pep
to the low-end. Cost more than the other headers, but i only wanted to do the
job once.
Don W
'82 CJ8 Scrambler
AMC 360
T/F 727
Dana 300
One-piece model 20 rear
Dana 30 front, upgraded to 6-bolt caliper and Warn hubs, awaiting locker
2" shackle lift/reversal
2" lift springs of unknown origin
33" Mickey's
And it finally runs!!!!!
#18
Guest
Posts: n/a
Re: 4.0 manifold crack !
THANKS A $ 1,000,000 ENROLLED IN CLASS ACTION SUIT. BUT STILL GOT TO FIX THE
MESS!!
"Nathan W. Collier" <Spam@Blocker.com> wrote in message
news:cTDkc.134957$04.3041247@twister.southeast.rr. com...
> be aware there is a class action suit going on right now for tj manifold
> cracks and it applies to your '97. see
> http://7slotgrille.com/forum/topic.asp?TOPIC_ID=1217
>
> go get paid.
> --
> Nathan W. Collier
> http://UtilityOffRoad.com
> http://7SlotGrille.com
>
> "....a talking bird is a freak" - Mr. Ed
>
>
> "casca" <casca@megsinet.net> wrote in message
> news:1095vsmj4o3qcc8@corp.supernews.com...
> > have a 97 TJ with 4.0 a crack above the flange.
> >
> > need some ideas- tips -recommendations
> >
> > weld it ?
> > aftermarket ?
> > header ?
> >
> > what have some of you done, did it work and for how long did it last ?
> >
> > again thanks
> > casca
> >
> >
>
>
MESS!!
"Nathan W. Collier" <Spam@Blocker.com> wrote in message
news:cTDkc.134957$04.3041247@twister.southeast.rr. com...
> be aware there is a class action suit going on right now for tj manifold
> cracks and it applies to your '97. see
> http://7slotgrille.com/forum/topic.asp?TOPIC_ID=1217
>
> go get paid.
> --
> Nathan W. Collier
> http://UtilityOffRoad.com
> http://7SlotGrille.com
>
> "....a talking bird is a freak" - Mr. Ed
>
>
> "casca" <casca@megsinet.net> wrote in message
> news:1095vsmj4o3qcc8@corp.supernews.com...
> > have a 97 TJ with 4.0 a crack above the flange.
> >
> > need some ideas- tips -recommendations
> >
> > weld it ?
> > aftermarket ?
> > header ?
> >
> > what have some of you done, did it work and for how long did it last ?
> >
> > again thanks
> > casca
> >
> >
>
>
#19
Guest
Posts: n/a
Re: 4.0 manifold crack !
THANKS A $ 1,000,000 ENROLLED IN CLASS ACTION SUIT. BUT STILL GOT TO FIX THE
MESS!!
"Nathan W. Collier" <Spam@Blocker.com> wrote in message
news:cTDkc.134957$04.3041247@twister.southeast.rr. com...
> be aware there is a class action suit going on right now for tj manifold
> cracks and it applies to your '97. see
> http://7slotgrille.com/forum/topic.asp?TOPIC_ID=1217
>
> go get paid.
> --
> Nathan W. Collier
> http://UtilityOffRoad.com
> http://7SlotGrille.com
>
> "....a talking bird is a freak" - Mr. Ed
>
>
> "casca" <casca@megsinet.net> wrote in message
> news:1095vsmj4o3qcc8@corp.supernews.com...
> > have a 97 TJ with 4.0 a crack above the flange.
> >
> > need some ideas- tips -recommendations
> >
> > weld it ?
> > aftermarket ?
> > header ?
> >
> > what have some of you done, did it work and for how long did it last ?
> >
> > again thanks
> > casca
> >
> >
>
>
MESS!!
"Nathan W. Collier" <Spam@Blocker.com> wrote in message
news:cTDkc.134957$04.3041247@twister.southeast.rr. com...
> be aware there is a class action suit going on right now for tj manifold
> cracks and it applies to your '97. see
> http://7slotgrille.com/forum/topic.asp?TOPIC_ID=1217
>
> go get paid.
> --
> Nathan W. Collier
> http://UtilityOffRoad.com
> http://7SlotGrille.com
>
> "....a talking bird is a freak" - Mr. Ed
>
>
> "casca" <casca@megsinet.net> wrote in message
> news:1095vsmj4o3qcc8@corp.supernews.com...
> > have a 97 TJ with 4.0 a crack above the flange.
> >
> > need some ideas- tips -recommendations
> >
> > weld it ?
> > aftermarket ?
> > header ?
> >
> > what have some of you done, did it work and for how long did it last ?
> >
> > again thanks
> > casca
> >
> >
>
>
#20
Guest
Posts: n/a
Re: 4.0 manifold crack !
THANKS A $ 1,000,000 ENROLLED IN CLASS ACTION SUIT. BUT STILL GOT TO FIX THE
MESS!!
"Nathan W. Collier" <Spam@Blocker.com> wrote in message
news:cTDkc.134957$04.3041247@twister.southeast.rr. com...
> be aware there is a class action suit going on right now for tj manifold
> cracks and it applies to your '97. see
> http://7slotgrille.com/forum/topic.asp?TOPIC_ID=1217
>
> go get paid.
> --
> Nathan W. Collier
> http://UtilityOffRoad.com
> http://7SlotGrille.com
>
> "....a talking bird is a freak" - Mr. Ed
>
>
> "casca" <casca@megsinet.net> wrote in message
> news:1095vsmj4o3qcc8@corp.supernews.com...
> > have a 97 TJ with 4.0 a crack above the flange.
> >
> > need some ideas- tips -recommendations
> >
> > weld it ?
> > aftermarket ?
> > header ?
> >
> > what have some of you done, did it work and for how long did it last ?
> >
> > again thanks
> > casca
> >
> >
>
>
MESS!!
"Nathan W. Collier" <Spam@Blocker.com> wrote in message
news:cTDkc.134957$04.3041247@twister.southeast.rr. com...
> be aware there is a class action suit going on right now for tj manifold
> cracks and it applies to your '97. see
> http://7slotgrille.com/forum/topic.asp?TOPIC_ID=1217
>
> go get paid.
> --
> Nathan W. Collier
> http://UtilityOffRoad.com
> http://7SlotGrille.com
>
> "....a talking bird is a freak" - Mr. Ed
>
>
> "casca" <casca@megsinet.net> wrote in message
> news:1095vsmj4o3qcc8@corp.supernews.com...
> > have a 97 TJ with 4.0 a crack above the flange.
> >
> > need some ideas- tips -recommendations
> >
> > weld it ?
> > aftermarket ?
> > header ?
> >
> > what have some of you done, did it work and for how long did it last ?
> >
> > again thanks
> > casca
> >
> >
>
>