31's causing noise in tranny?
Guest
Posts: n/a
Re: 31's causing noise in tranny?
Strange, the 98 'shouldn't' get a timing rattle....
I am not sure but could the chain in the t-case be a little loose or
does that even come into play in 2 wheel drive?
I am running 33's with 3.31 gears and can get a rattle if I don't pay
attention to my rpm, but that is only in the higher gears.
You are more describing a load rattle in lower gears.
Mike
stephjeff wrote:
>
> Mike, it's a 98 sport. 3.73
>
> I doesn't really feel like I'm lugging the engine, but it sounds like
> it. Is it because I made my gearing taller? I'm not really into the
> technical stuff, but I thought 3.73 was a good match for a 31" tire.
>
> thanks
> Jeff
> Mike Romain <romainm@sympatico.ca> wrote in message news:<3FF2557A.56FB86BE@sympatico.ca>...
> > Timing advance?
> >
> > What engine and year?
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > stephjeff wrote:
> > >
> > > I notice a lot of rattling sounds in 1st and 2nd gear now that I got
> > > these BFG 31's on a few days ago. The jeep rides nicer and still has
> > > decent power with the 3.73 gears. Actually I don't notice any power
> > > loss in coming from the stock 30's. It seems to be a better match
> > > with the gearing than the 30's were, at least in the lower gears. But
> > > it's making a lot of rattle now. Anyone have any ideas or is this a
> > > common thing that can be fixed?
> > >
> > > thanks
> > > Jeff
I am not sure but could the chain in the t-case be a little loose or
does that even come into play in 2 wheel drive?
I am running 33's with 3.31 gears and can get a rattle if I don't pay
attention to my rpm, but that is only in the higher gears.
You are more describing a load rattle in lower gears.
Mike
stephjeff wrote:
>
> Mike, it's a 98 sport. 3.73
>
> I doesn't really feel like I'm lugging the engine, but it sounds like
> it. Is it because I made my gearing taller? I'm not really into the
> technical stuff, but I thought 3.73 was a good match for a 31" tire.
>
> thanks
> Jeff
> Mike Romain <romainm@sympatico.ca> wrote in message news:<3FF2557A.56FB86BE@sympatico.ca>...
> > Timing advance?
> >
> > What engine and year?
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > stephjeff wrote:
> > >
> > > I notice a lot of rattling sounds in 1st and 2nd gear now that I got
> > > these BFG 31's on a few days ago. The jeep rides nicer and still has
> > > decent power with the 3.73 gears. Actually I don't notice any power
> > > loss in coming from the stock 30's. It seems to be a better match
> > > with the gearing than the 30's were, at least in the lower gears. But
> > > it's making a lot of rattle now. Anyone have any ideas or is this a
> > > common thing that can be fixed?
> > >
> > > thanks
> > > Jeff
Guest
Posts: n/a
Re: 31's causing noise in tranny?
Strange, the 98 'shouldn't' get a timing rattle....
I am not sure but could the chain in the t-case be a little loose or
does that even come into play in 2 wheel drive?
I am running 33's with 3.31 gears and can get a rattle if I don't pay
attention to my rpm, but that is only in the higher gears.
You are more describing a load rattle in lower gears.
Mike
stephjeff wrote:
>
> Mike, it's a 98 sport. 3.73
>
> I doesn't really feel like I'm lugging the engine, but it sounds like
> it. Is it because I made my gearing taller? I'm not really into the
> technical stuff, but I thought 3.73 was a good match for a 31" tire.
>
> thanks
> Jeff
> Mike Romain <romainm@sympatico.ca> wrote in message news:<3FF2557A.56FB86BE@sympatico.ca>...
> > Timing advance?
> >
> > What engine and year?
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > stephjeff wrote:
> > >
> > > I notice a lot of rattling sounds in 1st and 2nd gear now that I got
> > > these BFG 31's on a few days ago. The jeep rides nicer and still has
> > > decent power with the 3.73 gears. Actually I don't notice any power
> > > loss in coming from the stock 30's. It seems to be a better match
> > > with the gearing than the 30's were, at least in the lower gears. But
> > > it's making a lot of rattle now. Anyone have any ideas or is this a
> > > common thing that can be fixed?
> > >
> > > thanks
> > > Jeff
I am not sure but could the chain in the t-case be a little loose or
does that even come into play in 2 wheel drive?
I am running 33's with 3.31 gears and can get a rattle if I don't pay
attention to my rpm, but that is only in the higher gears.
You are more describing a load rattle in lower gears.
Mike
stephjeff wrote:
>
> Mike, it's a 98 sport. 3.73
>
> I doesn't really feel like I'm lugging the engine, but it sounds like
> it. Is it because I made my gearing taller? I'm not really into the
> technical stuff, but I thought 3.73 was a good match for a 31" tire.
>
> thanks
> Jeff
> Mike Romain <romainm@sympatico.ca> wrote in message news:<3FF2557A.56FB86BE@sympatico.ca>...
> > Timing advance?
> >
> > What engine and year?
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > stephjeff wrote:
> > >
> > > I notice a lot of rattling sounds in 1st and 2nd gear now that I got
> > > these BFG 31's on a few days ago. The jeep rides nicer and still has
> > > decent power with the 3.73 gears. Actually I don't notice any power
> > > loss in coming from the stock 30's. It seems to be a better match
> > > with the gearing than the 30's were, at least in the lower gears. But
> > > it's making a lot of rattle now. Anyone have any ideas or is this a
> > > common thing that can be fixed?
> > >
> > > thanks
> > > Jeff
Guest
Posts: n/a
Re: 31's causing noise in tranny?
Strange, the 98 'shouldn't' get a timing rattle....
I am not sure but could the chain in the t-case be a little loose or
does that even come into play in 2 wheel drive?
I am running 33's with 3.31 gears and can get a rattle if I don't pay
attention to my rpm, but that is only in the higher gears.
You are more describing a load rattle in lower gears.
Mike
stephjeff wrote:
>
> Mike, it's a 98 sport. 3.73
>
> I doesn't really feel like I'm lugging the engine, but it sounds like
> it. Is it because I made my gearing taller? I'm not really into the
> technical stuff, but I thought 3.73 was a good match for a 31" tire.
>
> thanks
> Jeff
> Mike Romain <romainm@sympatico.ca> wrote in message news:<3FF2557A.56FB86BE@sympatico.ca>...
> > Timing advance?
> >
> > What engine and year?
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > stephjeff wrote:
> > >
> > > I notice a lot of rattling sounds in 1st and 2nd gear now that I got
> > > these BFG 31's on a few days ago. The jeep rides nicer and still has
> > > decent power with the 3.73 gears. Actually I don't notice any power
> > > loss in coming from the stock 30's. It seems to be a better match
> > > with the gearing than the 30's were, at least in the lower gears. But
> > > it's making a lot of rattle now. Anyone have any ideas or is this a
> > > common thing that can be fixed?
> > >
> > > thanks
> > > Jeff
I am not sure but could the chain in the t-case be a little loose or
does that even come into play in 2 wheel drive?
I am running 33's with 3.31 gears and can get a rattle if I don't pay
attention to my rpm, but that is only in the higher gears.
You are more describing a load rattle in lower gears.
Mike
stephjeff wrote:
>
> Mike, it's a 98 sport. 3.73
>
> I doesn't really feel like I'm lugging the engine, but it sounds like
> it. Is it because I made my gearing taller? I'm not really into the
> technical stuff, but I thought 3.73 was a good match for a 31" tire.
>
> thanks
> Jeff
> Mike Romain <romainm@sympatico.ca> wrote in message news:<3FF2557A.56FB86BE@sympatico.ca>...
> > Timing advance?
> >
> > What engine and year?
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > stephjeff wrote:
> > >
> > > I notice a lot of rattling sounds in 1st and 2nd gear now that I got
> > > these BFG 31's on a few days ago. The jeep rides nicer and still has
> > > decent power with the 3.73 gears. Actually I don't notice any power
> > > loss in coming from the stock 30's. It seems to be a better match
> > > with the gearing than the 30's were, at least in the lower gears. But
> > > it's making a lot of rattle now. Anyone have any ideas or is this a
> > > common thing that can be fixed?
> > >
> > > thanks
> > > Jeff
Guest
Posts: n/a
Re: 31's causing noise in tranny?
Ya, 3.73's here with 31's and no rattle.
Dave
On 31 Dec 2003 08:11:28 -0800, bag@centurytel.net (stephjeff) wrote:
>Mike, it's a 98 sport. 3.73
>
>I doesn't really feel like I'm lugging the engine, but it sounds like
>it. Is it because I made my gearing taller? I'm not really into the
>technical stuff, but I thought 3.73 was a good match for a 31" tire.
>
>thanks
>Jeff
>Mike Romain <romainm@sympatico.ca> wrote in message news:<3FF2557A.56FB86BE@sympatico.ca>...
>> Timing advance?
>>
>> What engine and year?
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>>
>> stephjeff wrote:
>> >
>> > I notice a lot of rattling sounds in 1st and 2nd gear now that I got
>> > these BFG 31's on a few days ago. The jeep rides nicer and still has
>> > decent power with the 3.73 gears. Actually I don't notice any power
>> > loss in coming from the stock 30's. It seems to be a better match
>> > with the gearing than the 30's were, at least in the lower gears. But
>> > it's making a lot of rattle now. Anyone have any ideas or is this a
>> > common thing that can be fixed?
>> >
>> > thanks
>> > Jeff
Dave
On 31 Dec 2003 08:11:28 -0800, bag@centurytel.net (stephjeff) wrote:
>Mike, it's a 98 sport. 3.73
>
>I doesn't really feel like I'm lugging the engine, but it sounds like
>it. Is it because I made my gearing taller? I'm not really into the
>technical stuff, but I thought 3.73 was a good match for a 31" tire.
>
>thanks
>Jeff
>Mike Romain <romainm@sympatico.ca> wrote in message news:<3FF2557A.56FB86BE@sympatico.ca>...
>> Timing advance?
>>
>> What engine and year?
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>>
>> stephjeff wrote:
>> >
>> > I notice a lot of rattling sounds in 1st and 2nd gear now that I got
>> > these BFG 31's on a few days ago. The jeep rides nicer and still has
>> > decent power with the 3.73 gears. Actually I don't notice any power
>> > loss in coming from the stock 30's. It seems to be a better match
>> > with the gearing than the 30's were, at least in the lower gears. But
>> > it's making a lot of rattle now. Anyone have any ideas or is this a
>> > common thing that can be fixed?
>> >
>> > thanks
>> > Jeff
Guest
Posts: n/a
Re: 31's causing noise in tranny?
Ya, 3.73's here with 31's and no rattle.
Dave
On 31 Dec 2003 08:11:28 -0800, bag@centurytel.net (stephjeff) wrote:
>Mike, it's a 98 sport. 3.73
>
>I doesn't really feel like I'm lugging the engine, but it sounds like
>it. Is it because I made my gearing taller? I'm not really into the
>technical stuff, but I thought 3.73 was a good match for a 31" tire.
>
>thanks
>Jeff
>Mike Romain <romainm@sympatico.ca> wrote in message news:<3FF2557A.56FB86BE@sympatico.ca>...
>> Timing advance?
>>
>> What engine and year?
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>>
>> stephjeff wrote:
>> >
>> > I notice a lot of rattling sounds in 1st and 2nd gear now that I got
>> > these BFG 31's on a few days ago. The jeep rides nicer and still has
>> > decent power with the 3.73 gears. Actually I don't notice any power
>> > loss in coming from the stock 30's. It seems to be a better match
>> > with the gearing than the 30's were, at least in the lower gears. But
>> > it's making a lot of rattle now. Anyone have any ideas or is this a
>> > common thing that can be fixed?
>> >
>> > thanks
>> > Jeff
Dave
On 31 Dec 2003 08:11:28 -0800, bag@centurytel.net (stephjeff) wrote:
>Mike, it's a 98 sport. 3.73
>
>I doesn't really feel like I'm lugging the engine, but it sounds like
>it. Is it because I made my gearing taller? I'm not really into the
>technical stuff, but I thought 3.73 was a good match for a 31" tire.
>
>thanks
>Jeff
>Mike Romain <romainm@sympatico.ca> wrote in message news:<3FF2557A.56FB86BE@sympatico.ca>...
>> Timing advance?
>>
>> What engine and year?
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>>
>> stephjeff wrote:
>> >
>> > I notice a lot of rattling sounds in 1st and 2nd gear now that I got
>> > these BFG 31's on a few days ago. The jeep rides nicer and still has
>> > decent power with the 3.73 gears. Actually I don't notice any power
>> > loss in coming from the stock 30's. It seems to be a better match
>> > with the gearing than the 30's were, at least in the lower gears. But
>> > it's making a lot of rattle now. Anyone have any ideas or is this a
>> > common thing that can be fixed?
>> >
>> > thanks
>> > Jeff
Guest
Posts: n/a
Re: 31's causing noise in tranny?
Ya, 3.73's here with 31's and no rattle.
Dave
On 31 Dec 2003 08:11:28 -0800, bag@centurytel.net (stephjeff) wrote:
>Mike, it's a 98 sport. 3.73
>
>I doesn't really feel like I'm lugging the engine, but it sounds like
>it. Is it because I made my gearing taller? I'm not really into the
>technical stuff, but I thought 3.73 was a good match for a 31" tire.
>
>thanks
>Jeff
>Mike Romain <romainm@sympatico.ca> wrote in message news:<3FF2557A.56FB86BE@sympatico.ca>...
>> Timing advance?
>>
>> What engine and year?
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>>
>> stephjeff wrote:
>> >
>> > I notice a lot of rattling sounds in 1st and 2nd gear now that I got
>> > these BFG 31's on a few days ago. The jeep rides nicer and still has
>> > decent power with the 3.73 gears. Actually I don't notice any power
>> > loss in coming from the stock 30's. It seems to be a better match
>> > with the gearing than the 30's were, at least in the lower gears. But
>> > it's making a lot of rattle now. Anyone have any ideas or is this a
>> > common thing that can be fixed?
>> >
>> > thanks
>> > Jeff
Dave
On 31 Dec 2003 08:11:28 -0800, bag@centurytel.net (stephjeff) wrote:
>Mike, it's a 98 sport. 3.73
>
>I doesn't really feel like I'm lugging the engine, but it sounds like
>it. Is it because I made my gearing taller? I'm not really into the
>technical stuff, but I thought 3.73 was a good match for a 31" tire.
>
>thanks
>Jeff
>Mike Romain <romainm@sympatico.ca> wrote in message news:<3FF2557A.56FB86BE@sympatico.ca>...
>> Timing advance?
>>
>> What engine and year?
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>>
>> stephjeff wrote:
>> >
>> > I notice a lot of rattling sounds in 1st and 2nd gear now that I got
>> > these BFG 31's on a few days ago. The jeep rides nicer and still has
>> > decent power with the 3.73 gears. Actually I don't notice any power
>> > loss in coming from the stock 30's. It seems to be a better match
>> > with the gearing than the 30's were, at least in the lower gears. But
>> > it's making a lot of rattle now. Anyone have any ideas or is this a
>> > common thing that can be fixed?
>> >
>> > thanks
>> > Jeff
Guest
Posts: n/a
Re: 31's causing noise in tranny?
I'm gonna be taking it in for a grease/oil to my mechanic bud. I'll
see if he can check for the problem in the tranny. Is there an
adjustment? Today, it's not very noticeable if I don't shift until 3K
rpms in 1st and 2nd. That seems high. I don't hear it in the higher
gears as much. Could it be that I just have to drive a little
different and shift at a higher rpm, with the different matchup?
thanks
Jeff
David C. Moller <dmoller@verizon.net> wrote in message news:<t5a6vv0t8pm5ch2e27d74cbke36s8rpjs9@4ax.com>. ..
> Ya, 3.73's here with 31's and no rattle.
>
> Dave
>
> On 31 Dec 2003 08:11:28 -0800, bag@centurytel.net (stephjeff) wrote:
>
> >Mike, it's a 98 sport. 3.73
> >
> >I doesn't really feel like I'm lugging the engine, but it sounds like
> >it. Is it because I made my gearing taller? I'm not really into the
> >technical stuff, but I thought 3.73 was a good match for a 31" tire.
> >
> >thanks
> >Jeff
> >Mike Romain <romainm@sympatico.ca> wrote in message news:<3FF2557A.56FB86BE@sympatico.ca>...
> >> Timing advance?
> >>
> >> What engine and year?
> >>
> >> Mike
> >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >> 88 Cherokee 235 BFG AT's
> >>
> >> stephjeff wrote:
> >> >
> >> > I notice a lot of rattling sounds in 1st and 2nd gear now that I got
> >> > these BFG 31's on a few days ago. The jeep rides nicer and still has
> >> > decent power with the 3.73 gears. Actually I don't notice any power
> >> > loss in coming from the stock 30's. It seems to be a better match
> >> > with the gearing than the 30's were, at least in the lower gears. But
> >> > it's making a lot of rattle now. Anyone have any ideas or is this a
> >> > common thing that can be fixed?
> >> >
> >> > thanks
> >> > Jeff
see if he can check for the problem in the tranny. Is there an
adjustment? Today, it's not very noticeable if I don't shift until 3K
rpms in 1st and 2nd. That seems high. I don't hear it in the higher
gears as much. Could it be that I just have to drive a little
different and shift at a higher rpm, with the different matchup?
thanks
Jeff
David C. Moller <dmoller@verizon.net> wrote in message news:<t5a6vv0t8pm5ch2e27d74cbke36s8rpjs9@4ax.com>. ..
> Ya, 3.73's here with 31's and no rattle.
>
> Dave
>
> On 31 Dec 2003 08:11:28 -0800, bag@centurytel.net (stephjeff) wrote:
>
> >Mike, it's a 98 sport. 3.73
> >
> >I doesn't really feel like I'm lugging the engine, but it sounds like
> >it. Is it because I made my gearing taller? I'm not really into the
> >technical stuff, but I thought 3.73 was a good match for a 31" tire.
> >
> >thanks
> >Jeff
> >Mike Romain <romainm@sympatico.ca> wrote in message news:<3FF2557A.56FB86BE@sympatico.ca>...
> >> Timing advance?
> >>
> >> What engine and year?
> >>
> >> Mike
> >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >> 88 Cherokee 235 BFG AT's
> >>
> >> stephjeff wrote:
> >> >
> >> > I notice a lot of rattling sounds in 1st and 2nd gear now that I got
> >> > these BFG 31's on a few days ago. The jeep rides nicer and still has
> >> > decent power with the 3.73 gears. Actually I don't notice any power
> >> > loss in coming from the stock 30's. It seems to be a better match
> >> > with the gearing than the 30's were, at least in the lower gears. But
> >> > it's making a lot of rattle now. Anyone have any ideas or is this a
> >> > common thing that can be fixed?
> >> >
> >> > thanks
> >> > Jeff
Guest
Posts: n/a
Re: 31's causing noise in tranny?
I'm gonna be taking it in for a grease/oil to my mechanic bud. I'll
see if he can check for the problem in the tranny. Is there an
adjustment? Today, it's not very noticeable if I don't shift until 3K
rpms in 1st and 2nd. That seems high. I don't hear it in the higher
gears as much. Could it be that I just have to drive a little
different and shift at a higher rpm, with the different matchup?
thanks
Jeff
David C. Moller <dmoller@verizon.net> wrote in message news:<t5a6vv0t8pm5ch2e27d74cbke36s8rpjs9@4ax.com>. ..
> Ya, 3.73's here with 31's and no rattle.
>
> Dave
>
> On 31 Dec 2003 08:11:28 -0800, bag@centurytel.net (stephjeff) wrote:
>
> >Mike, it's a 98 sport. 3.73
> >
> >I doesn't really feel like I'm lugging the engine, but it sounds like
> >it. Is it because I made my gearing taller? I'm not really into the
> >technical stuff, but I thought 3.73 was a good match for a 31" tire.
> >
> >thanks
> >Jeff
> >Mike Romain <romainm@sympatico.ca> wrote in message news:<3FF2557A.56FB86BE@sympatico.ca>...
> >> Timing advance?
> >>
> >> What engine and year?
> >>
> >> Mike
> >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >> 88 Cherokee 235 BFG AT's
> >>
> >> stephjeff wrote:
> >> >
> >> > I notice a lot of rattling sounds in 1st and 2nd gear now that I got
> >> > these BFG 31's on a few days ago. The jeep rides nicer and still has
> >> > decent power with the 3.73 gears. Actually I don't notice any power
> >> > loss in coming from the stock 30's. It seems to be a better match
> >> > with the gearing than the 30's were, at least in the lower gears. But
> >> > it's making a lot of rattle now. Anyone have any ideas or is this a
> >> > common thing that can be fixed?
> >> >
> >> > thanks
> >> > Jeff
see if he can check for the problem in the tranny. Is there an
adjustment? Today, it's not very noticeable if I don't shift until 3K
rpms in 1st and 2nd. That seems high. I don't hear it in the higher
gears as much. Could it be that I just have to drive a little
different and shift at a higher rpm, with the different matchup?
thanks
Jeff
David C. Moller <dmoller@verizon.net> wrote in message news:<t5a6vv0t8pm5ch2e27d74cbke36s8rpjs9@4ax.com>. ..
> Ya, 3.73's here with 31's and no rattle.
>
> Dave
>
> On 31 Dec 2003 08:11:28 -0800, bag@centurytel.net (stephjeff) wrote:
>
> >Mike, it's a 98 sport. 3.73
> >
> >I doesn't really feel like I'm lugging the engine, but it sounds like
> >it. Is it because I made my gearing taller? I'm not really into the
> >technical stuff, but I thought 3.73 was a good match for a 31" tire.
> >
> >thanks
> >Jeff
> >Mike Romain <romainm@sympatico.ca> wrote in message news:<3FF2557A.56FB86BE@sympatico.ca>...
> >> Timing advance?
> >>
> >> What engine and year?
> >>
> >> Mike
> >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >> 88 Cherokee 235 BFG AT's
> >>
> >> stephjeff wrote:
> >> >
> >> > I notice a lot of rattling sounds in 1st and 2nd gear now that I got
> >> > these BFG 31's on a few days ago. The jeep rides nicer and still has
> >> > decent power with the 3.73 gears. Actually I don't notice any power
> >> > loss in coming from the stock 30's. It seems to be a better match
> >> > with the gearing than the 30's were, at least in the lower gears. But
> >> > it's making a lot of rattle now. Anyone have any ideas or is this a
> >> > common thing that can be fixed?
> >> >
> >> > thanks
> >> > Jeff
Guest
Posts: n/a
Re: 31's causing noise in tranny?
I'm gonna be taking it in for a grease/oil to my mechanic bud. I'll
see if he can check for the problem in the tranny. Is there an
adjustment? Today, it's not very noticeable if I don't shift until 3K
rpms in 1st and 2nd. That seems high. I don't hear it in the higher
gears as much. Could it be that I just have to drive a little
different and shift at a higher rpm, with the different matchup?
thanks
Jeff
David C. Moller <dmoller@verizon.net> wrote in message news:<t5a6vv0t8pm5ch2e27d74cbke36s8rpjs9@4ax.com>. ..
> Ya, 3.73's here with 31's and no rattle.
>
> Dave
>
> On 31 Dec 2003 08:11:28 -0800, bag@centurytel.net (stephjeff) wrote:
>
> >Mike, it's a 98 sport. 3.73
> >
> >I doesn't really feel like I'm lugging the engine, but it sounds like
> >it. Is it because I made my gearing taller? I'm not really into the
> >technical stuff, but I thought 3.73 was a good match for a 31" tire.
> >
> >thanks
> >Jeff
> >Mike Romain <romainm@sympatico.ca> wrote in message news:<3FF2557A.56FB86BE@sympatico.ca>...
> >> Timing advance?
> >>
> >> What engine and year?
> >>
> >> Mike
> >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >> 88 Cherokee 235 BFG AT's
> >>
> >> stephjeff wrote:
> >> >
> >> > I notice a lot of rattling sounds in 1st and 2nd gear now that I got
> >> > these BFG 31's on a few days ago. The jeep rides nicer and still has
> >> > decent power with the 3.73 gears. Actually I don't notice any power
> >> > loss in coming from the stock 30's. It seems to be a better match
> >> > with the gearing than the 30's were, at least in the lower gears. But
> >> > it's making a lot of rattle now. Anyone have any ideas or is this a
> >> > common thing that can be fixed?
> >> >
> >> > thanks
> >> > Jeff
see if he can check for the problem in the tranny. Is there an
adjustment? Today, it's not very noticeable if I don't shift until 3K
rpms in 1st and 2nd. That seems high. I don't hear it in the higher
gears as much. Could it be that I just have to drive a little
different and shift at a higher rpm, with the different matchup?
thanks
Jeff
David C. Moller <dmoller@verizon.net> wrote in message news:<t5a6vv0t8pm5ch2e27d74cbke36s8rpjs9@4ax.com>. ..
> Ya, 3.73's here with 31's and no rattle.
>
> Dave
>
> On 31 Dec 2003 08:11:28 -0800, bag@centurytel.net (stephjeff) wrote:
>
> >Mike, it's a 98 sport. 3.73
> >
> >I doesn't really feel like I'm lugging the engine, but it sounds like
> >it. Is it because I made my gearing taller? I'm not really into the
> >technical stuff, but I thought 3.73 was a good match for a 31" tire.
> >
> >thanks
> >Jeff
> >Mike Romain <romainm@sympatico.ca> wrote in message news:<3FF2557A.56FB86BE@sympatico.ca>...
> >> Timing advance?
> >>
> >> What engine and year?
> >>
> >> Mike
> >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >> 88 Cherokee 235 BFG AT's
> >>
> >> stephjeff wrote:
> >> >
> >> > I notice a lot of rattling sounds in 1st and 2nd gear now that I got
> >> > these BFG 31's on a few days ago. The jeep rides nicer and still has
> >> > decent power with the 3.73 gears. Actually I don't notice any power
> >> > loss in coming from the stock 30's. It seems to be a better match
> >> > with the gearing than the 30's were, at least in the lower gears. But
> >> > it's making a lot of rattle now. Anyone have any ideas or is this a
> >> > common thing that can be fixed?
> >> >
> >> > thanks
> >> > Jeff
Thread
Thread Starter
Forum
Replies
Last Post
bspear78
Jeep Mailing List
72
Nov 19, 2006 01:25 PM
Jeep Mailing List
9
Jan 16, 2004 03:23 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)