High Setting on Blower Doesn't Work (97 Jeep)
12-30-2003, 11:02 PM
#1
Guest
Posts: n/a
High Setting on Blower Doesn't Work (97 Jeep)
x-no-archive: yes
Hi all,
I have a 1997 Jeep Wrangler, 2.5, standard transmission, no air
conditioning.
For about two years now, the highest setting on my heater (fan) blower
does not work. The other three settings work fine.
Any ideas?
Thanks
KL
Hi all,
I have a 1997 Jeep Wrangler, 2.5, standard transmission, no air
conditioning.
For about two years now, the highest setting on my heater (fan) blower
does not work. The other three settings work fine.
Any ideas?
Thanks
KL
12-30-2003, 11:18 PM
#2
Guest
Posts: n/a
Re: High Setting on Blower Doesn't Work (97 Jeep)
The fans in the YJ have a resistor circuit hidden in the fan ducting
and I would suspect that you have a problem with the wiring or the
resistor coils. To test this theory connect the fan lead to a 12V feed
right from the battery and see if you get full speed from the fan if
so you need to inspect the resistor coil. To get at it remove the
housing just below the passenger side speaker and take a look up
inside the housing or just wire your fan to a 12v source and live with
high speed all the time.
On Wed, 31 Dec 2003 04:02:13 GMT, KL (1k2l3r4@mindspring.com) wrote:
>x-no-archive: yes
>
>Hi all,
>
>I have a 1997 Jeep Wrangler, 2.5, standard transmission, no air
>conditioning.
>
>For about two years now, the highest setting on my heater (fan) blower
>does not work. The other three settings work fine.
>
>Any ideas?
>
>Thanks
>KL
and I would suspect that you have a problem with the wiring or the
resistor coils. To test this theory connect the fan lead to a 12V feed
right from the battery and see if you get full speed from the fan if
so you need to inspect the resistor coil. To get at it remove the
housing just below the passenger side speaker and take a look up
inside the housing or just wire your fan to a 12v source and live with
high speed all the time.
On Wed, 31 Dec 2003 04:02:13 GMT, KL (1k2l3r4@mindspring.com) wrote:
>x-no-archive: yes
>
>Hi all,
>
>I have a 1997 Jeep Wrangler, 2.5, standard transmission, no air
>conditioning.
>
>For about two years now, the highest setting on my heater (fan) blower
>does not work. The other three settings work fine.
>
>Any ideas?
>
>Thanks
>KL
12-30-2003, 11:18 PM
#3
Guest
Posts: n/a
Re: High Setting on Blower Doesn't Work (97 Jeep)
The fans in the YJ have a resistor circuit hidden in the fan ducting
and I would suspect that you have a problem with the wiring or the
resistor coils. To test this theory connect the fan lead to a 12V feed
right from the battery and see if you get full speed from the fan if
so you need to inspect the resistor coil. To get at it remove the
housing just below the passenger side speaker and take a look up
inside the housing or just wire your fan to a 12v source and live with
high speed all the time.
On Wed, 31 Dec 2003 04:02:13 GMT, KL (1k2l3r4@mindspring.com) wrote:
>x-no-archive: yes
>
>Hi all,
>
>I have a 1997 Jeep Wrangler, 2.5, standard transmission, no air
>conditioning.
>
>For about two years now, the highest setting on my heater (fan) blower
>does not work. The other three settings work fine.
>
>Any ideas?
>
>Thanks
>KL
and I would suspect that you have a problem with the wiring or the
resistor coils. To test this theory connect the fan lead to a 12V feed
right from the battery and see if you get full speed from the fan if
so you need to inspect the resistor coil. To get at it remove the
housing just below the passenger side speaker and take a look up
inside the housing or just wire your fan to a 12v source and live with
high speed all the time.
On Wed, 31 Dec 2003 04:02:13 GMT, KL (1k2l3r4@mindspring.com) wrote:
>x-no-archive: yes
>
>Hi all,
>
>I have a 1997 Jeep Wrangler, 2.5, standard transmission, no air
>conditioning.
>
>For about two years now, the highest setting on my heater (fan) blower
>does not work. The other three settings work fine.
>
>Any ideas?
>
>Thanks
>KL
12-30-2003, 11:18 PM
#4
Guest
Posts: n/a
Re: High Setting on Blower Doesn't Work (97 Jeep)
The fans in the YJ have a resistor circuit hidden in the fan ducting
and I would suspect that you have a problem with the wiring or the
resistor coils. To test this theory connect the fan lead to a 12V feed
right from the battery and see if you get full speed from the fan if
so you need to inspect the resistor coil. To get at it remove the
housing just below the passenger side speaker and take a look up
inside the housing or just wire your fan to a 12v source and live with
high speed all the time.
On Wed, 31 Dec 2003 04:02:13 GMT, KL (1k2l3r4@mindspring.com) wrote:
>x-no-archive: yes
>
>Hi all,
>
>I have a 1997 Jeep Wrangler, 2.5, standard transmission, no air
>conditioning.
>
>For about two years now, the highest setting on my heater (fan) blower
>does not work. The other three settings work fine.
>
>Any ideas?
>
>Thanks
>KL
and I would suspect that you have a problem with the wiring or the
resistor coils. To test this theory connect the fan lead to a 12V feed
right from the battery and see if you get full speed from the fan if
so you need to inspect the resistor coil. To get at it remove the
housing just below the passenger side speaker and take a look up
inside the housing or just wire your fan to a 12v source and live with
high speed all the time.
On Wed, 31 Dec 2003 04:02:13 GMT, KL (1k2l3r4@mindspring.com) wrote:
>x-no-archive: yes
>
>Hi all,
>
>I have a 1997 Jeep Wrangler, 2.5, standard transmission, no air
>conditioning.
>
>For about two years now, the highest setting on my heater (fan) blower
>does not work. The other three settings work fine.
>
>Any ideas?
>
>Thanks
>KL
12-30-2003, 11:36 PM
#5
Guest
Posts: n/a
Re: High Setting on Blower Doesn't Work (97 Jeep)
Fuse number 11 in the Power Distribution Center:
http://www.----------.com/resistor.htm The PDC is located under the
hood, in the box next to the battery.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/resistor.htm
"1k2l3r4@mindspring.com" wrote:
>
> x-no-archive: yes
>
> Hi all,
>
> I have a 1997 Jeep Wrangler, 2.5, standard transmission, no air
> conditioning.
>
> For about two years now, the highest setting on my heater (fan) blower
> does not work. The other three settings work fine.
>
> Any ideas?
>
> Thanks
> KL
http://www.----------.com/resistor.htm The PDC is located under the
hood, in the box next to the battery.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/resistor.htm
"1k2l3r4@mindspring.com" wrote:
>
> x-no-archive: yes
>
> Hi all,
>
> I have a 1997 Jeep Wrangler, 2.5, standard transmission, no air
> conditioning.
>
> For about two years now, the highest setting on my heater (fan) blower
> does not work. The other three settings work fine.
>
> Any ideas?
>
> Thanks
> KL
12-30-2003, 11:36 PM
#6
Guest
Posts: n/a
Re: High Setting on Blower Doesn't Work (97 Jeep)
Fuse number 11 in the Power Distribution Center:
http://www.----------.com/resistor.htm The PDC is located under the
hood, in the box next to the battery.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/resistor.htm
"1k2l3r4@mindspring.com" wrote:
>
> x-no-archive: yes
>
> Hi all,
>
> I have a 1997 Jeep Wrangler, 2.5, standard transmission, no air
> conditioning.
>
> For about two years now, the highest setting on my heater (fan) blower
> does not work. The other three settings work fine.
>
> Any ideas?
>
> Thanks
> KL
http://www.----------.com/resistor.htm The PDC is located under the
hood, in the box next to the battery.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/resistor.htm
"1k2l3r4@mindspring.com" wrote:
>
> x-no-archive: yes
>
> Hi all,
>
> I have a 1997 Jeep Wrangler, 2.5, standard transmission, no air
> conditioning.
>
> For about two years now, the highest setting on my heater (fan) blower
> does not work. The other three settings work fine.
>
> Any ideas?
>
> Thanks
> KL
12-30-2003, 11:36 PM
#7
Guest
Posts: n/a
Re: High Setting on Blower Doesn't Work (97 Jeep)
Fuse number 11 in the Power Distribution Center:
http://www.----------.com/resistor.htm The PDC is located under the
hood, in the box next to the battery.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/resistor.htm
"1k2l3r4@mindspring.com" wrote:
>
> x-no-archive: yes
>
> Hi all,
>
> I have a 1997 Jeep Wrangler, 2.5, standard transmission, no air
> conditioning.
>
> For about two years now, the highest setting on my heater (fan) blower
> does not work. The other three settings work fine.
>
> Any ideas?
>
> Thanks
> KL
http://www.----------.com/resistor.htm The PDC is located under the
hood, in the box next to the battery.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/resistor.htm
"1k2l3r4@mindspring.com" wrote:
>
> x-no-archive: yes
>
> Hi all,
>
> I have a 1997 Jeep Wrangler, 2.5, standard transmission, no air
> conditioning.
>
> For about two years now, the highest setting on my heater (fan) blower
> does not work. The other three settings work fine.
>
> Any ideas?
>
> Thanks
> KL
12-31-2003, 01:05 AM
#8
Guest
Posts: n/a
Re: High Setting on Blower Doesn't Work (97 Jeep)
Sorry what I said earlier may not apply to your vehicle I sped read
the post and my mind saw 87 Wrangler when you of course were looking
for info on your 97 Wrangler.
>>
>> x-no-archive: yes
>>
>> Hi all,
>>
>> I have a 1997 Jeep Wrangler, 2.5, standard transmission, no air
>> conditioning.
>>
>> For about two years now, the highest setting on my heater (fan) blower
>> does not work. The other three settings work fine.
>>
>> Any ideas?
>>
>> Thanks
>> KL
the post and my mind saw 87 Wrangler when you of course were looking
for info on your 97 Wrangler.
>>
>> x-no-archive: yes
>>
>> Hi all,
>>
>> I have a 1997 Jeep Wrangler, 2.5, standard transmission, no air
>> conditioning.
>>
>> For about two years now, the highest setting on my heater (fan) blower
>> does not work. The other three settings work fine.
>>
>> Any ideas?
>>
>> Thanks
>> KL
12-31-2003, 01:05 AM
#9
Guest
Posts: n/a
Re: High Setting on Blower Doesn't Work (97 Jeep)
Sorry what I said earlier may not apply to your vehicle I sped read
the post and my mind saw 87 Wrangler when you of course were looking
for info on your 97 Wrangler.
>>
>> x-no-archive: yes
>>
>> Hi all,
>>
>> I have a 1997 Jeep Wrangler, 2.5, standard transmission, no air
>> conditioning.
>>
>> For about two years now, the highest setting on my heater (fan) blower
>> does not work. The other three settings work fine.
>>
>> Any ideas?
>>
>> Thanks
>> KL
the post and my mind saw 87 Wrangler when you of course were looking
for info on your 97 Wrangler.
>>
>> x-no-archive: yes
>>
>> Hi all,
>>
>> I have a 1997 Jeep Wrangler, 2.5, standard transmission, no air
>> conditioning.
>>
>> For about two years now, the highest setting on my heater (fan) blower
>> does not work. The other three settings work fine.
>>
>> Any ideas?
>>
>> Thanks
>> KL
12-31-2003, 01:05 AM
#10
Guest
Posts: n/a
Re: High Setting on Blower Doesn't Work (97 Jeep)
Sorry what I said earlier may not apply to your vehicle I sped read
the post and my mind saw 87 Wrangler when you of course were looking
for info on your 97 Wrangler.
>>
>> x-no-archive: yes
>>
>> Hi all,
>>
>> I have a 1997 Jeep Wrangler, 2.5, standard transmission, no air
>> conditioning.
>>
>> For about two years now, the highest setting on my heater (fan) blower
>> does not work. The other three settings work fine.
>>
>> Any ideas?
>>
>> Thanks
>> KL
the post and my mind saw 87 Wrangler when you of course were looking
for info on your 97 Wrangler.
>>
>> x-no-archive: yes
>>
>> Hi all,
>>
>> I have a 1997 Jeep Wrangler, 2.5, standard transmission, no air
>> conditioning.
>>
>> For about two years now, the highest setting on my heater (fan) blower
>> does not work. The other three settings work fine.
>>
>> Any ideas?
>>
>> Thanks
>> KL