Jeeps Canada - Jeep Forums

Jeeps Canada - Jeep Forums (https://www.jeepscanada.com/)
-   Jeep Mailing List (https://www.jeepscanada.com/jeep-mailing-list-32/)
-   -   303 Protectant and Jeep TJ Fender Flares (https://www.jeepscanada.com/jeep-mailing-list-32/303-protectant-jeep-tj-fender-flares-19374/)

Campbell Freeman 08-11-2004 12:45 PM

303 Protectant and Jeep TJ Fender Flares
 
Hello,

I have a 2001 TJ with very faded fender flares. Once they were black and
now they are a light gray. I know this issue has been discussed at great
length, but I had used ArmorAll in the past and it looks good for about a
day. I recently purchased 303 Protectant, which I read is very good, but
after 2 applications, improvement is marginal at best. Would more
applications be fruitful, or are they too far gone by now? The 303 works
very well on other areas on which it has been applied, but they were not in
the poor condition of these flares. Why doesn't D/C make a more robust
black flare which would be more resistant to UV fading? (obvious question I
know).

Thanks

Campbell Freeman
South Carolina



twaldron 08-11-2004 12:55 PM

Re: 303 Protectant and Jeep TJ Fender Flares
 
People have had luck with a heat gun.

Campbell Freeman wrote:

> Hello,
>
> I have a 2001 TJ with very faded fender flares. Once they were black and
> now they are a light gray. I know this issue has been discussed at great
> length, but I had used ArmorAll in the past and it looks good for about a
> day. I recently purchased 303 Protectant, which I read is very good, but
> after 2 applications, improvement is marginal at best. Would more
> applications be fruitful, or are they too far gone by now? The 303 works
> very well on other areas on which it has been applied, but they were not in
> the poor condition of these flares. Why doesn't D/C make a more robust
> black flare which would be more resistant to UV fading? (obvious question I
> know).
>
> Thanks
>
> Campbell Freeman
> South Carolina
>
>


--
__________________________________________________ _________
tw

03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport

There is a very fine line between "hobby" and "mental illness."
-- Dave Barry

Pronunciation: 'jEp
Function: noun
Date: 1940

Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.

(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________


twaldron 08-11-2004 12:55 PM

Re: 303 Protectant and Jeep TJ Fender Flares
 
People have had luck with a heat gun.

Campbell Freeman wrote:

> Hello,
>
> I have a 2001 TJ with very faded fender flares. Once they were black and
> now they are a light gray. I know this issue has been discussed at great
> length, but I had used ArmorAll in the past and it looks good for about a
> day. I recently purchased 303 Protectant, which I read is very good, but
> after 2 applications, improvement is marginal at best. Would more
> applications be fruitful, or are they too far gone by now? The 303 works
> very well on other areas on which it has been applied, but they were not in
> the poor condition of these flares. Why doesn't D/C make a more robust
> black flare which would be more resistant to UV fading? (obvious question I
> know).
>
> Thanks
>
> Campbell Freeman
> South Carolina
>
>


--
__________________________________________________ _________
tw

03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport

There is a very fine line between "hobby" and "mental illness."
-- Dave Barry

Pronunciation: 'jEp
Function: noun
Date: 1940

Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.

(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________


twaldron 08-11-2004 12:55 PM

Re: 303 Protectant and Jeep TJ Fender Flares
 
People have had luck with a heat gun.

Campbell Freeman wrote:

> Hello,
>
> I have a 2001 TJ with very faded fender flares. Once they were black and
> now they are a light gray. I know this issue has been discussed at great
> length, but I had used ArmorAll in the past and it looks good for about a
> day. I recently purchased 303 Protectant, which I read is very good, but
> after 2 applications, improvement is marginal at best. Would more
> applications be fruitful, or are they too far gone by now? The 303 works
> very well on other areas on which it has been applied, but they were not in
> the poor condition of these flares. Why doesn't D/C make a more robust
> black flare which would be more resistant to UV fading? (obvious question I
> know).
>
> Thanks
>
> Campbell Freeman
> South Carolina
>
>


--
__________________________________________________ _________
tw

03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport

There is a very fine line between "hobby" and "mental illness."
-- Dave Barry

Pronunciation: 'jEp
Function: noun
Date: 1940

Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.

(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________


twaldron 08-11-2004 12:55 PM

Re: 303 Protectant and Jeep TJ Fender Flares
 
People have had luck with a heat gun.

Campbell Freeman wrote:

> Hello,
>
> I have a 2001 TJ with very faded fender flares. Once they were black and
> now they are a light gray. I know this issue has been discussed at great
> length, but I had used ArmorAll in the past and it looks good for about a
> day. I recently purchased 303 Protectant, which I read is very good, but
> after 2 applications, improvement is marginal at best. Would more
> applications be fruitful, or are they too far gone by now? The 303 works
> very well on other areas on which it has been applied, but they were not in
> the poor condition of these flares. Why doesn't D/C make a more robust
> black flare which would be more resistant to UV fading? (obvious question I
> know).
>
> Thanks
>
> Campbell Freeman
> South Carolina
>
>


--
__________________________________________________ _________
tw

03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport

There is a very fine line between "hobby" and "mental illness."
-- Dave Barry

Pronunciation: 'jEp
Function: noun
Date: 1940

Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.

(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________


Mike Romain 08-11-2004 12:57 PM

Re: 303 Protectant and Jeep TJ Fender Flares
 
Kinda silly that my 1986 CJ7's flares are still as black as the day they
were made eh.

I hear 'back to black' is the stuff to use on yours. Mine just need
water now and then. ;-)

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Campbell Freeman wrote:
>
> Hello,
>
> I have a 2001 TJ with very faded fender flares. Once they were black and
> now they are a light gray. I know this issue has been discussed at great
> length, but I had used ArmorAll in the past and it looks good for about a
> day. I recently purchased 303 Protectant, which I read is very good, but
> after 2 applications, improvement is marginal at best. Would more
> applications be fruitful, or are they too far gone by now? The 303 works
> very well on other areas on which it has been applied, but they were not in
> the poor condition of these flares. Why doesn't D/C make a more robust
> black flare which would be more resistant to UV fading? (obvious question I
> know).
>
> Thanks
>
> Campbell Freeman
> South Carolina


Mike Romain 08-11-2004 12:57 PM

Re: 303 Protectant and Jeep TJ Fender Flares
 
Kinda silly that my 1986 CJ7's flares are still as black as the day they
were made eh.

I hear 'back to black' is the stuff to use on yours. Mine just need
water now and then. ;-)

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Campbell Freeman wrote:
>
> Hello,
>
> I have a 2001 TJ with very faded fender flares. Once they were black and
> now they are a light gray. I know this issue has been discussed at great
> length, but I had used ArmorAll in the past and it looks good for about a
> day. I recently purchased 303 Protectant, which I read is very good, but
> after 2 applications, improvement is marginal at best. Would more
> applications be fruitful, or are they too far gone by now? The 303 works
> very well on other areas on which it has been applied, but they were not in
> the poor condition of these flares. Why doesn't D/C make a more robust
> black flare which would be more resistant to UV fading? (obvious question I
> know).
>
> Thanks
>
> Campbell Freeman
> South Carolina


Mike Romain 08-11-2004 12:57 PM

Re: 303 Protectant and Jeep TJ Fender Flares
 
Kinda silly that my 1986 CJ7's flares are still as black as the day they
were made eh.

I hear 'back to black' is the stuff to use on yours. Mine just need
water now and then. ;-)

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Campbell Freeman wrote:
>
> Hello,
>
> I have a 2001 TJ with very faded fender flares. Once they were black and
> now they are a light gray. I know this issue has been discussed at great
> length, but I had used ArmorAll in the past and it looks good for about a
> day. I recently purchased 303 Protectant, which I read is very good, but
> after 2 applications, improvement is marginal at best. Would more
> applications be fruitful, or are they too far gone by now? The 303 works
> very well on other areas on which it has been applied, but they were not in
> the poor condition of these flares. Why doesn't D/C make a more robust
> black flare which would be more resistant to UV fading? (obvious question I
> know).
>
> Thanks
>
> Campbell Freeman
> South Carolina


Mike Romain 08-11-2004 12:57 PM

Re: 303 Protectant and Jeep TJ Fender Flares
 
Kinda silly that my 1986 CJ7's flares are still as black as the day they
were made eh.

I hear 'back to black' is the stuff to use on yours. Mine just need
water now and then. ;-)

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Campbell Freeman wrote:
>
> Hello,
>
> I have a 2001 TJ with very faded fender flares. Once they were black and
> now they are a light gray. I know this issue has been discussed at great
> length, but I had used ArmorAll in the past and it looks good for about a
> day. I recently purchased 303 Protectant, which I read is very good, but
> after 2 applications, improvement is marginal at best. Would more
> applications be fruitful, or are they too far gone by now? The 303 works
> very well on other areas on which it has been applied, but they were not in
> the poor condition of these flares. Why doesn't D/C make a more robust
> black flare which would be more resistant to UV fading? (obvious question I
> know).
>
> Thanks
>
> Campbell Freeman
> South Carolina


Campbell Freeman 08-11-2004 03:04 PM

Re: 303 Protectant and Jeep TJ Fender Flares
 
Thanks. I'll give that stuff a try. Not knowing where you live, but here in
the deep south the sun can be a real "killer."

Campbell

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:411A4FE0.407DF163@sympatico.ca...
> Kinda silly that my 1986 CJ7's flares are still as black as the day they
> were made eh.
>
> I hear 'back to black' is the stuff to use on yours. Mine just need
> water now and then. ;-)
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Campbell Freeman wrote:
> >
> > Hello,
> >
> > I have a 2001 TJ with very faded fender flares. Once they were black

and
> > now they are a light gray. I know this issue has been discussed at

great
> > length, but I had used ArmorAll in the past and it looks good for about

a
> > day. I recently purchased 303 Protectant, which I read is very good,

but
> > after 2 applications, improvement is marginal at best. Would more
> > applications be fruitful, or are they too far gone by now? The 303 works
> > very well on other areas on which it has been applied, but they were not

in
> > the poor condition of these flares. Why doesn't D/C make a more robust
> > black flare which would be more resistant to UV fading? (obvious

question I
> > know).
> >
> > Thanks
> >
> > Campbell Freeman
> > South Carolina





All times are GMT -4. The time now is 03:41 AM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.05574 seconds with 5 queries