303 Protectant and Jeep TJ Fender Flares
 

Hello,

I have a 2001 TJ with very faded fender flares. Once they were black and
now they are a light gray. I know this issue has been discussed at great
length, but I had used ArmorAll in the past and it looks good for about a
day. I recently purchased 303 Protectant, which I read is very good, but
after 2 applications, improvement is marginal at best. Would more
applications be fruitful, or are they too far gone by now? The 303 works
very well on other areas on which it has been applied, but they were not in
the poor condition of these flares. Why doesn't D/C make a more robust
black flare which would be more resistant to UV fading? (obvious question I
know).

Thanks

Campbell Freeman
South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

People have had luck with a heat gun.

Campbell Freeman wrote:

> Hello,
>
> I have a 2001 TJ with very faded fender flares. Once they were black and
> now they are a light gray. I know this issue has been discussed at great
> length, but I had used ArmorAll in the past and it looks good for about a
> day. I recently purchased 303 Protectant, which I read is very good, but
> after 2 applications, improvement is marginal at best. Would more
> applications be fruitful, or are they too far gone by now? The 303 works
> very well on other areas on which it has been applied, but they were not in
> the poor condition of these flares. Why doesn't D/C make a more robust
> black flare which would be more resistant to UV fading? (obvious question I
> know).
>
> Thanks
>
> Campbell Freeman
> South Carolina
>
>

--
__________________________________________________ _________
tw

03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport

There is a very fine line between "hobby" and "mental illness."
-- Dave Barry

Pronunciation: 'jEp
Function: noun
Date: 1940

Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.

(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________

Re: 303 Protectant and Jeep TJ Fender Flares
 

People have had luck with a heat gun.

Campbell Freeman wrote:

> Hello,
>
> I have a 2001 TJ with very faded fender flares. Once they were black and
> now they are a light gray. I know this issue has been discussed at great
> length, but I had used ArmorAll in the past and it looks good for about a
> day. I recently purchased 303 Protectant, which I read is very good, but
> after 2 applications, improvement is marginal at best. Would more
> applications be fruitful, or are they too far gone by now? The 303 works
> very well on other areas on which it has been applied, but they were not in
> the poor condition of these flares. Why doesn't D/C make a more robust
> black flare which would be more resistant to UV fading? (obvious question I
> know).
>
> Thanks
>
> Campbell Freeman
> South Carolina
>
>

--
__________________________________________________ _________
tw

03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport

There is a very fine line between "hobby" and "mental illness."
-- Dave Barry

Pronunciation: 'jEp
Function: noun
Date: 1940

Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.

(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________

Re: 303 Protectant and Jeep TJ Fender Flares
 

People have had luck with a heat gun.

Campbell Freeman wrote:

> Hello,
>
> I have a 2001 TJ with very faded fender flares. Once they were black and
> now they are a light gray. I know this issue has been discussed at great
> length, but I had used ArmorAll in the past and it looks good for about a
> day. I recently purchased 303 Protectant, which I read is very good, but
> after 2 applications, improvement is marginal at best. Would more
> applications be fruitful, or are they too far gone by now? The 303 works
> very well on other areas on which it has been applied, but they were not in
> the poor condition of these flares. Why doesn't D/C make a more robust
> black flare which would be more resistant to UV fading? (obvious question I
> know).
>
> Thanks
>
> Campbell Freeman
> South Carolina
>
>

--
__________________________________________________ _________
tw

03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport

There is a very fine line between "hobby" and "mental illness."
-- Dave Barry

Pronunciation: 'jEp
Function: noun
Date: 1940

Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.

(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________

Re: 303 Protectant and Jeep TJ Fender Flares
 

People have had luck with a heat gun.

Campbell Freeman wrote:

> Hello,
>
> I have a 2001 TJ with very faded fender flares. Once they were black and
> now they are a light gray. I know this issue has been discussed at great
> length, but I had used ArmorAll in the past and it looks good for about a
> day. I recently purchased 303 Protectant, which I read is very good, but
> after 2 applications, improvement is marginal at best. Would more
> applications be fruitful, or are they too far gone by now? The 303 works
> very well on other areas on which it has been applied, but they were not in
> the poor condition of these flares. Why doesn't D/C make a more robust
> black flare which would be more resistant to UV fading? (obvious question I
> know).
>
> Thanks
>
> Campbell Freeman
> South Carolina
>
>

--
__________________________________________________ _________
tw

03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport

There is a very fine line between "hobby" and "mental illness."
-- Dave Barry

Pronunciation: 'jEp
Function: noun
Date: 1940

Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.

(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________

Re: 303 Protectant and Jeep TJ Fender Flares
 

Kinda silly that my 1986 CJ7's flares are still as black as the day they
were made eh.

I hear 'back to black' is the stuff to use on yours. Mine just need
water now and then. ;-)

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Campbell Freeman wrote:
>
> Hello,
>
> I have a 2001 TJ with very faded fender flares. Once they were black and
> now they are a light gray. I know this issue has been discussed at great
> length, but I had used ArmorAll in the past and it looks good for about a
> day. I recently purchased 303 Protectant, which I read is very good, but
> after 2 applications, improvement is marginal at best. Would more
> applications be fruitful, or are they too far gone by now? The 303 works
> very well on other areas on which it has been applied, but they were not in
> the poor condition of these flares. Why doesn't D/C make a more robust
> black flare which would be more resistant to UV fading? (obvious question I
> know).
>
> Thanks
>
> Campbell Freeman
> South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

Kinda silly that my 1986 CJ7's flares are still as black as the day they
were made eh.

I hear 'back to black' is the stuff to use on yours. Mine just need
water now and then. ;-)

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Campbell Freeman wrote:
>
> Hello,
>
> I have a 2001 TJ with very faded fender flares. Once they were black and
> now they are a light gray. I know this issue has been discussed at great
> length, but I had used ArmorAll in the past and it looks good for about a
> day. I recently purchased 303 Protectant, which I read is very good, but
> after 2 applications, improvement is marginal at best. Would more
> applications be fruitful, or are they too far gone by now? The 303 works
> very well on other areas on which it has been applied, but they were not in
> the poor condition of these flares. Why doesn't D/C make a more robust
> black flare which would be more resistant to UV fading? (obvious question I
> know).
>
> Thanks
>
> Campbell Freeman
> South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

Kinda silly that my 1986 CJ7's flares are still as black as the day they
were made eh.

I hear 'back to black' is the stuff to use on yours. Mine just need
water now and then. ;-)

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Campbell Freeman wrote:
>
> Hello,
>
> I have a 2001 TJ with very faded fender flares. Once they were black and
> now they are a light gray. I know this issue has been discussed at great
> length, but I had used ArmorAll in the past and it looks good for about a
> day. I recently purchased 303 Protectant, which I read is very good, but
> after 2 applications, improvement is marginal at best. Would more
> applications be fruitful, or are they too far gone by now? The 303 works
> very well on other areas on which it has been applied, but they were not in
> the poor condition of these flares. Why doesn't D/C make a more robust
> black flare which would be more resistant to UV fading? (obvious question I
> know).
>
> Thanks
>
> Campbell Freeman
> South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

Kinda silly that my 1986 CJ7's flares are still as black as the day they
were made eh.

I hear 'back to black' is the stuff to use on yours. Mine just need
water now and then. ;-)

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Campbell Freeman wrote:
>
> Hello,
>
> I have a 2001 TJ with very faded fender flares. Once they were black and
> now they are a light gray. I know this issue has been discussed at great
> length, but I had used ArmorAll in the past and it looks good for about a
> day. I recently purchased 303 Protectant, which I read is very good, but
> after 2 applications, improvement is marginal at best. Would more
> applications be fruitful, or are they too far gone by now? The 303 works
> very well on other areas on which it has been applied, but they were not in
> the poor condition of these flares. Why doesn't D/C make a more robust
> black flare which would be more resistant to UV fading? (obvious question I
> know).
>
> Thanks
>
> Campbell Freeman
> South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

Thanks. I'll give that stuff a try. Not knowing where you live, but here in
the deep south the sun can be a real "killer."

Campbell

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:411A4FE0.407DF163@sympatico.ca...
> Kinda silly that my 1986 CJ7's flares are still as black as the day they
> were made eh.
>
> I hear 'back to black' is the stuff to use on yours. Mine just need
> water now and then. ;-)
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Campbell Freeman wrote:
> >
> > Hello,
> >
> > I have a 2001 TJ with very faded fender flares. Once they were black
and
> > now they are a light gray. I know this issue has been discussed at
great
> > length, but I had used ArmorAll in the past and it looks good for about
a
> > day. I recently purchased 303 Protectant, which I read is very good,
but
> > after 2 applications, improvement is marginal at best. Would more
> > applications be fruitful, or are they too far gone by now? The 303 works
> > very well on other areas on which it has been applied, but they were not
in
> > the poor condition of these flares. Why doesn't D/C make a more robust
> > black flare which would be more resistant to UV fading? (obvious
question I
> > know).
> >
> > Thanks
> >
> > Campbell Freeman
> > South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

Thanks. I'll give that stuff a try. Not knowing where you live, but here in
the deep south the sun can be a real "killer."

Campbell

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:411A4FE0.407DF163@sympatico.ca...
> Kinda silly that my 1986 CJ7's flares are still as black as the day they
> were made eh.
>
> I hear 'back to black' is the stuff to use on yours. Mine just need
> water now and then. ;-)
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Campbell Freeman wrote:
> >
> > Hello,
> >
> > I have a 2001 TJ with very faded fender flares. Once they were black
and
> > now they are a light gray. I know this issue has been discussed at
great
> > length, but I had used ArmorAll in the past and it looks good for about
a
> > day. I recently purchased 303 Protectant, which I read is very good,
but
> > after 2 applications, improvement is marginal at best. Would more
> > applications be fruitful, or are they too far gone by now? The 303 works
> > very well on other areas on which it has been applied, but they were not
in
> > the poor condition of these flares. Why doesn't D/C make a more robust
> > black flare which would be more resistant to UV fading? (obvious
question I
> > know).
> >
> > Thanks
> >
> > Campbell Freeman
> > South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

Thanks. I'll give that stuff a try. Not knowing where you live, but here in
the deep south the sun can be a real "killer."

Campbell

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:411A4FE0.407DF163@sympatico.ca...
> Kinda silly that my 1986 CJ7's flares are still as black as the day they
> were made eh.
>
> I hear 'back to black' is the stuff to use on yours. Mine just need
> water now and then. ;-)
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Campbell Freeman wrote:
> >
> > Hello,
> >
> > I have a 2001 TJ with very faded fender flares. Once they were black
and
> > now they are a light gray. I know this issue has been discussed at
great
> > length, but I had used ArmorAll in the past and it looks good for about
a
> > day. I recently purchased 303 Protectant, which I read is very good,
but
> > after 2 applications, improvement is marginal at best. Would more
> > applications be fruitful, or are they too far gone by now? The 303 works
> > very well on other areas on which it has been applied, but they were not
in
> > the poor condition of these flares. Why doesn't D/C make a more robust
> > black flare which would be more resistant to UV fading? (obvious
question I
> > know).
> >
> > Thanks
> >
> > Campbell Freeman
> > South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

Thanks. I'll give that stuff a try. Not knowing where you live, but here in
the deep south the sun can be a real "killer."

Campbell

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:411A4FE0.407DF163@sympatico.ca...
> Kinda silly that my 1986 CJ7's flares are still as black as the day they
> were made eh.
>
> I hear 'back to black' is the stuff to use on yours. Mine just need
> water now and then. ;-)
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Campbell Freeman wrote:
> >
> > Hello,
> >
> > I have a 2001 TJ with very faded fender flares. Once they were black
and
> > now they are a light gray. I know this issue has been discussed at
great
> > length, but I had used ArmorAll in the past and it looks good for about
a
> > day. I recently purchased 303 Protectant, which I read is very good,
but
> > after 2 applications, improvement is marginal at best. Would more
> > applications be fruitful, or are they too far gone by now? The 303 works
> > very well on other areas on which it has been applied, but they were not
in
> > the poor condition of these flares. Why doesn't D/C make a more robust
> > black flare which would be more resistant to UV fading? (obvious
question I
> > know).
> >
> > Thanks
> >
> > Campbell Freeman
> > South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

Well I did a quick google search for Back-to-Black and come up with nothing.
Any clues?


"Mike Romain" <romainm@sympatico.ca> wrote in message
news:411A4FE0.407DF163@sympatico.ca...
> Kinda silly that my 1986 CJ7's flares are still as black as the day they
> were made eh.
>
> I hear 'back to black' is the stuff to use on yours. Mine just need
> water now and then. ;-)
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Campbell Freeman wrote:
> >
> > Hello,
> >
> > I have a 2001 TJ with very faded fender flares. Once they were black
and
> > now they are a light gray. I know this issue has been discussed at
great
> > length, but I had used ArmorAll in the past and it looks good for about
a
> > day. I recently purchased 303 Protectant, which I read is very good,
but
> > after 2 applications, improvement is marginal at best. Would more
> > applications be fruitful, or are they too far gone by now? The 303 works
> > very well on other areas on which it has been applied, but they were not
in
> > the poor condition of these flares. Why doesn't D/C make a more robust
> > black flare which would be more resistant to UV fading? (obvious
question I
> > know).
> >
> > Thanks
> >
> > Campbell Freeman
> > South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

Well I did a quick google search for Back-to-Black and come up with nothing.
Any clues?


"Mike Romain" <romainm@sympatico.ca> wrote in message
news:411A4FE0.407DF163@sympatico.ca...
> Kinda silly that my 1986 CJ7's flares are still as black as the day they
> were made eh.
>
> I hear 'back to black' is the stuff to use on yours. Mine just need
> water now and then. ;-)
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Campbell Freeman wrote:
> >
> > Hello,
> >
> > I have a 2001 TJ with very faded fender flares. Once they were black
and
> > now they are a light gray. I know this issue has been discussed at
great
> > length, but I had used ArmorAll in the past and it looks good for about
a
> > day. I recently purchased 303 Protectant, which I read is very good,
but
> > after 2 applications, improvement is marginal at best. Would more
> > applications be fruitful, or are they too far gone by now? The 303 works
> > very well on other areas on which it has been applied, but they were not
in
> > the poor condition of these flares. Why doesn't D/C make a more robust
> > black flare which would be more resistant to UV fading? (obvious
question I
> > know).
> >
> > Thanks
> >
> > Campbell Freeman
> > South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

Well I did a quick google search for Back-to-Black and come up with nothing.
Any clues?


"Mike Romain" <romainm@sympatico.ca> wrote in message
news:411A4FE0.407DF163@sympatico.ca...
> Kinda silly that my 1986 CJ7's flares are still as black as the day they
> were made eh.
>
> I hear 'back to black' is the stuff to use on yours. Mine just need
> water now and then. ;-)
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Campbell Freeman wrote:
> >
> > Hello,
> >
> > I have a 2001 TJ with very faded fender flares. Once they were black
and
> > now they are a light gray. I know this issue has been discussed at
great
> > length, but I had used ArmorAll in the past and it looks good for about
a
> > day. I recently purchased 303 Protectant, which I read is very good,
but
> > after 2 applications, improvement is marginal at best. Would more
> > applications be fruitful, or are they too far gone by now? The 303 works
> > very well on other areas on which it has been applied, but they were not
in
> > the poor condition of these flares. Why doesn't D/C make a more robust
> > black flare which would be more resistant to UV fading? (obvious
question I
> > know).
> >
> > Thanks
> >
> > Campbell Freeman
> > South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

Well I did a quick google search for Back-to-Black and come up with nothing.
Any clues?


"Mike Romain" <romainm@sympatico.ca> wrote in message
news:411A4FE0.407DF163@sympatico.ca...
> Kinda silly that my 1986 CJ7's flares are still as black as the day they
> were made eh.
>
> I hear 'back to black' is the stuff to use on yours. Mine just need
> water now and then. ;-)
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Campbell Freeman wrote:
> >
> > Hello,
> >
> > I have a 2001 TJ with very faded fender flares. Once they were black
and
> > now they are a light gray. I know this issue has been discussed at
great
> > length, but I had used ArmorAll in the past and it looks good for about
a
> > day. I recently purchased 303 Protectant, which I read is very good,
but
> > after 2 applications, improvement is marginal at best. Would more
> > applications be fruitful, or are they too far gone by now? The 303 works
> > very well on other areas on which it has been applied, but they were not
in
> > the poor condition of these flares. Why doesn't D/C make a more robust
> > black flare which would be more resistant to UV fading? (obvious
question I
> > know).
> >
> > Thanks
> >
> > Campbell Freeman
> > South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

Any auto parts store.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Campbell Freeman wrote:
>
> Well I did a quick google search for Back-to-Black and come up with nothing.
> Any clues?

Re: 303 Protectant and Jeep TJ Fender Flares
 

Any auto parts store.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Campbell Freeman wrote:
>
> Well I did a quick google search for Back-to-Black and come up with nothing.
> Any clues?

Re: 303 Protectant and Jeep TJ Fender Flares
 

Any auto parts store.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Campbell Freeman wrote:
>
> Well I did a quick google search for Back-to-Black and come up with nothing.
> Any clues?

Re: 303 Protectant and Jeep TJ Fender Flares
 

Any auto parts store.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Campbell Freeman wrote:
>
> Well I did a quick google search for Back-to-Black and come up with nothing.
> Any clues?

Re: 303 Protectant and Jeep TJ Fender Flares
 

I found it through google here:

http://store.superior-carcare.net/mopo.html

Bottom right of page.

Mike

Campbell Freeman wrote:
>
> Well I did a quick google search for Back-to-Black and come up with nothing.
> Any clues?
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:411A4FE0.407DF163@sympatico.ca...
> > Kinda silly that my 1986 CJ7's flares are still as black as the day they
> > were made eh.
> >
> > I hear 'back to black' is the stuff to use on yours. Mine just need
> > water now and then. ;-)
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Campbell Freeman wrote:
> > >
> > > Hello,
> > >
> > > I have a 2001 TJ with very faded fender flares. Once they were black
> and
> > > now they are a light gray. I know this issue has been discussed at
> great
> > > length, but I had used ArmorAll in the past and it looks good for about
> a
> > > day. I recently purchased 303 Protectant, which I read is very good,
> but
> > > after 2 applications, improvement is marginal at best. Would more
> > > applications be fruitful, or are they too far gone by now? The 303 works
> > > very well on other areas on which it has been applied, but they were not
> in
> > > the poor condition of these flares. Why doesn't D/C make a more robust
> > > black flare which would be more resistant to UV fading? (obvious
> question I
> > > know).
> > >
> > > Thanks
> > >
> > > Campbell Freeman
> > > South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

I found it through google here:

http://store.superior-carcare.net/mopo.html

Bottom right of page.

Mike

Campbell Freeman wrote:
>
> Well I did a quick google search for Back-to-Black and come up with nothing.
> Any clues?
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:411A4FE0.407DF163@sympatico.ca...
> > Kinda silly that my 1986 CJ7's flares are still as black as the day they
> > were made eh.
> >
> > I hear 'back to black' is the stuff to use on yours. Mine just need
> > water now and then. ;-)
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Campbell Freeman wrote:
> > >
> > > Hello,
> > >
> > > I have a 2001 TJ with very faded fender flares. Once they were black
> and
> > > now they are a light gray. I know this issue has been discussed at
> great
> > > length, but I had used ArmorAll in the past and it looks good for about
> a
> > > day. I recently purchased 303 Protectant, which I read is very good,
> but
> > > after 2 applications, improvement is marginal at best. Would more
> > > applications be fruitful, or are they too far gone by now? The 303 works
> > > very well on other areas on which it has been applied, but they were not
> in
> > > the poor condition of these flares. Why doesn't D/C make a more robust
> > > black flare which would be more resistant to UV fading? (obvious
> question I
> > > know).
> > >
> > > Thanks
> > >
> > > Campbell Freeman
> > > South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

I found it through google here:

http://store.superior-carcare.net/mopo.html

Bottom right of page.

Mike

Campbell Freeman wrote:
>
> Well I did a quick google search for Back-to-Black and come up with nothing.
> Any clues?
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:411A4FE0.407DF163@sympatico.ca...
> > Kinda silly that my 1986 CJ7's flares are still as black as the day they
> > were made eh.
> >
> > I hear 'back to black' is the stuff to use on yours. Mine just need
> > water now and then. ;-)
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Campbell Freeman wrote:
> > >
> > > Hello,
> > >
> > > I have a 2001 TJ with very faded fender flares. Once they were black
> and
> > > now they are a light gray. I know this issue has been discussed at
> great
> > > length, but I had used ArmorAll in the past and it looks good for about
> a
> > > day. I recently purchased 303 Protectant, which I read is very good,
> but
> > > after 2 applications, improvement is marginal at best. Would more
> > > applications be fruitful, or are they too far gone by now? The 303 works
> > > very well on other areas on which it has been applied, but they were not
> in
> > > the poor condition of these flares. Why doesn't D/C make a more robust
> > > black flare which would be more resistant to UV fading? (obvious
> question I
> > > know).
> > >
> > > Thanks
> > >
> > > Campbell Freeman
> > > South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

I found it through google here:

http://store.superior-carcare.net/mopo.html

Bottom right of page.

Mike

Campbell Freeman wrote:
>
> Well I did a quick google search for Back-to-Black and come up with nothing.
> Any clues?
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:411A4FE0.407DF163@sympatico.ca...
> > Kinda silly that my 1986 CJ7's flares are still as black as the day they
> > were made eh.
> >
> > I hear 'back to black' is the stuff to use on yours. Mine just need
> > water now and then. ;-)
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Campbell Freeman wrote:
> > >
> > > Hello,
> > >
> > > I have a 2001 TJ with very faded fender flares. Once they were black
> and
> > > now they are a light gray. I know this issue has been discussed at
> great
> > > length, but I had used ArmorAll in the past and it looks good for about
> a
> > > day. I recently purchased 303 Protectant, which I read is very good,
> but
> > > after 2 applications, improvement is marginal at best. Would more
> > > applications be fruitful, or are they too far gone by now? The 303 works
> > > very well on other areas on which it has been applied, but they were not
> in
> > > the poor condition of these flares. Why doesn't D/C make a more robust
> > > black flare which would be more resistant to UV fading? (obvious
> question I
> > > know).
> > >
> > > Thanks
> > >
> > > Campbell Freeman
> > > South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

Thanks all...I found it.


"Mike Romain" <romainm@sympatico.ca> wrote in message
news:411A782E.8E504FEB@sympatico.ca...
> I found it through google here:
>
> http://store.superior-carcare.net/mopo.html
>
> Bottom right of page.
>
> Mike
>
> Campbell Freeman wrote:
> >
> > Well I did a quick google search for Back-to-Black and come up with
nothing.
> > Any clues?
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:411A4FE0.407DF163@sympatico.ca...
> > > Kinda silly that my 1986 CJ7's flares are still as black as the day
they
> > > were made eh.
> > >
> > > I hear 'back to black' is the stuff to use on yours. Mine just need
> > > water now and then. ;-)
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > Campbell Freeman wrote:
> > > >
> > > > Hello,
> > > >
> > > > I have a 2001 TJ with very faded fender flares. Once they were
black
> > and
> > > > now they are a light gray. I know this issue has been discussed at
> > great
> > > > length, but I had used ArmorAll in the past and it looks good for
about
> > a
> > > > day. I recently purchased 303 Protectant, which I read is very
good,
> > but
> > > > after 2 applications, improvement is marginal at best. Would more
> > > > applications be fruitful, or are they too far gone by now? The 303
works
> > > > very well on other areas on which it has been applied, but they were
not
> > in
> > > > the poor condition of these flares. Why doesn't D/C make a more
robust
> > > > black flare which would be more resistant to UV fading? (obvious
> > question I
> > > > know).
> > > >
> > > > Thanks
> > > >
> > > > Campbell Freeman
> > > > South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

Thanks all...I found it.


"Mike Romain" <romainm@sympatico.ca> wrote in message
news:411A782E.8E504FEB@sympatico.ca...
> I found it through google here:
>
> http://store.superior-carcare.net/mopo.html
>
> Bottom right of page.
>
> Mike
>
> Campbell Freeman wrote:
> >
> > Well I did a quick google search for Back-to-Black and come up with
nothing.
> > Any clues?
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:411A4FE0.407DF163@sympatico.ca...
> > > Kinda silly that my 1986 CJ7's flares are still as black as the day
they
> > > were made eh.
> > >
> > > I hear 'back to black' is the stuff to use on yours. Mine just need
> > > water now and then. ;-)
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > Campbell Freeman wrote:
> > > >
> > > > Hello,
> > > >
> > > > I have a 2001 TJ with very faded fender flares. Once they were
black
> > and
> > > > now they are a light gray. I know this issue has been discussed at
> > great
> > > > length, but I had used ArmorAll in the past and it looks good for
about
> > a
> > > > day. I recently purchased 303 Protectant, which I read is very
good,
> > but
> > > > after 2 applications, improvement is marginal at best. Would more
> > > > applications be fruitful, or are they too far gone by now? The 303
works
> > > > very well on other areas on which it has been applied, but they were
not
> > in
> > > > the poor condition of these flares. Why doesn't D/C make a more
robust
> > > > black flare which would be more resistant to UV fading? (obvious
> > question I
> > > > know).
> > > >
> > > > Thanks
> > > >
> > > > Campbell Freeman
> > > > South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

Thanks all...I found it.


"Mike Romain" <romainm@sympatico.ca> wrote in message
news:411A782E.8E504FEB@sympatico.ca...
> I found it through google here:
>
> http://store.superior-carcare.net/mopo.html
>
> Bottom right of page.
>
> Mike
>
> Campbell Freeman wrote:
> >
> > Well I did a quick google search for Back-to-Black and come up with
nothing.
> > Any clues?
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:411A4FE0.407DF163@sympatico.ca...
> > > Kinda silly that my 1986 CJ7's flares are still as black as the day
they
> > > were made eh.
> > >
> > > I hear 'back to black' is the stuff to use on yours. Mine just need
> > > water now and then. ;-)
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > Campbell Freeman wrote:
> > > >
> > > > Hello,
> > > >
> > > > I have a 2001 TJ with very faded fender flares. Once they were
black
> > and
> > > > now they are a light gray. I know this issue has been discussed at
> > great
> > > > length, but I had used ArmorAll in the past and it looks good for
about
> > a
> > > > day. I recently purchased 303 Protectant, which I read is very
good,
> > but
> > > > after 2 applications, improvement is marginal at best. Would more
> > > > applications be fruitful, or are they too far gone by now? The 303
works
> > > > very well on other areas on which it has been applied, but they were
not
> > in
> > > > the poor condition of these flares. Why doesn't D/C make a more
robust
> > > > black flare which would be more resistant to UV fading? (obvious
> > question I
> > > > know).
> > > >
> > > > Thanks
> > > >
> > > > Campbell Freeman
> > > > South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

Thanks all...I found it.


"Mike Romain" <romainm@sympatico.ca> wrote in message
news:411A782E.8E504FEB@sympatico.ca...
> I found it through google here:
>
> http://store.superior-carcare.net/mopo.html
>
> Bottom right of page.
>
> Mike
>
> Campbell Freeman wrote:
> >
> > Well I did a quick google search for Back-to-Black and come up with
nothing.
> > Any clues?
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:411A4FE0.407DF163@sympatico.ca...
> > > Kinda silly that my 1986 CJ7's flares are still as black as the day
they
> > > were made eh.
> > >
> > > I hear 'back to black' is the stuff to use on yours. Mine just need
> > > water now and then. ;-)
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > Campbell Freeman wrote:
> > > >
> > > > Hello,
> > > >
> > > > I have a 2001 TJ with very faded fender flares. Once they were
black
> > and
> > > > now they are a light gray. I know this issue has been discussed at
> > great
> > > > length, but I had used ArmorAll in the past and it looks good for
about
> > a
> > > > day. I recently purchased 303 Protectant, which I read is very
good,
> > but
> > > > after 2 applications, improvement is marginal at best. Would more
> > > > applications be fruitful, or are they too far gone by now? The 303
works
> > > > very well on other areas on which it has been applied, but they were
not
> > in
> > > > the poor condition of these flares. Why doesn't D/C make a more
robust
> > > > black flare which would be more resistant to UV fading? (obvious
> > question I
> > > > know).
> > > >
> > > > Thanks
> > > >
> > > > Campbell Freeman
> > > > South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

i have BACK TO BLACK if you want it ,it's about 100ft in my back yard.once
the sun starts to make it's lovely marks it's over .
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:411A4FE0.407DF163@sympatico.ca...
> Kinda silly that my 1986 CJ7's flares are still as black as the day they
> were made eh.
>
> I hear 'back to black' is the stuff to use on yours. Mine just need
> water now and then. ;-)
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Campbell Freeman wrote:
> >
> > Hello,
> >
> > I have a 2001 TJ with very faded fender flares. Once they were black
and
> > now they are a light gray. I know this issue has been discussed at
great
> > length, but I had used ArmorAll in the past and it looks good for about
a
> > day. I recently purchased 303 Protectant, which I read is very good,
but
> > after 2 applications, improvement is marginal at best. Would more
> > applications be fruitful, or are they too far gone by now? The 303 works
> > very well on other areas on which it has been applied, but they were not
in
> > the poor condition of these flares. Why doesn't D/C make a more robust
> > black flare which would be more resistant to UV fading? (obvious
question I
> > know).
> >
> > Thanks
> >
> > Campbell Freeman
> > South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

i have BACK TO BLACK if you want it ,it's about 100ft in my back yard.once
the sun starts to make it's lovely marks it's over .
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:411A4FE0.407DF163@sympatico.ca...
> Kinda silly that my 1986 CJ7's flares are still as black as the day they
> were made eh.
>
> I hear 'back to black' is the stuff to use on yours. Mine just need
> water now and then. ;-)
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Campbell Freeman wrote:
> >
> > Hello,
> >
> > I have a 2001 TJ with very faded fender flares. Once they were black
and
> > now they are a light gray. I know this issue has been discussed at
great
> > length, but I had used ArmorAll in the past and it looks good for about
a
> > day. I recently purchased 303 Protectant, which I read is very good,
but
> > after 2 applications, improvement is marginal at best. Would more
> > applications be fruitful, or are they too far gone by now? The 303 works
> > very well on other areas on which it has been applied, but they were not
in
> > the poor condition of these flares. Why doesn't D/C make a more robust
> > black flare which would be more resistant to UV fading? (obvious
question I
> > know).
> >
> > Thanks
> >
> > Campbell Freeman
> > South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

i have BACK TO BLACK if you want it ,it's about 100ft in my back yard.once
the sun starts to make it's lovely marks it's over .
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:411A4FE0.407DF163@sympatico.ca...
> Kinda silly that my 1986 CJ7's flares are still as black as the day they
> were made eh.
>
> I hear 'back to black' is the stuff to use on yours. Mine just need
> water now and then. ;-)
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Campbell Freeman wrote:
> >
> > Hello,
> >
> > I have a 2001 TJ with very faded fender flares. Once they were black
and
> > now they are a light gray. I know this issue has been discussed at
great
> > length, but I had used ArmorAll in the past and it looks good for about
a
> > day. I recently purchased 303 Protectant, which I read is very good,
but
> > after 2 applications, improvement is marginal at best. Would more
> > applications be fruitful, or are they too far gone by now? The 303 works
> > very well on other areas on which it has been applied, but they were not
in
> > the poor condition of these flares. Why doesn't D/C make a more robust
> > black flare which would be more resistant to UV fading? (obvious
question I
> > know).
> >
> > Thanks
> >
> > Campbell Freeman
> > South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

i have BACK TO BLACK if you want it ,it's about 100ft in my back yard.once
the sun starts to make it's lovely marks it's over .
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:411A4FE0.407DF163@sympatico.ca...
> Kinda silly that my 1986 CJ7's flares are still as black as the day they
> were made eh.
>
> I hear 'back to black' is the stuff to use on yours. Mine just need
> water now and then. ;-)
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Campbell Freeman wrote:
> >
> > Hello,
> >
> > I have a 2001 TJ with very faded fender flares. Once they were black
and
> > now they are a light gray. I know this issue has been discussed at
great
> > length, but I had used ArmorAll in the past and it looks good for about
a
> > day. I recently purchased 303 Protectant, which I read is very good,
but
> > after 2 applications, improvement is marginal at best. Would more
> > applications be fruitful, or are they too far gone by now? The 303 works
> > very well on other areas on which it has been applied, but they were not
in
> > the poor condition of these flares. Why doesn't D/C make a more robust
> > black flare which would be more resistant to UV fading? (obvious
question I
> > know).
> >
> > Thanks
> >
> > Campbell Freeman
> > South Carolina

Re: 303 Protectant and Jeep TJ Fender Flares
 

On Wed, 11 Aug 2004 12:45:01 -0400, "Campbell Freeman"
<cfreeman@scetv.org> wrote:

>Hello,
>
>I have a 2001 TJ with very faded fender flares.

Someone here suggested Penetrol a while back. I tried it and it
really works!

Mark
'98 TJ
'98 XJ

Re: 303 Protectant and Jeep TJ Fender Flares
 

On Wed, 11 Aug 2004 12:45:01 -0400, "Campbell Freeman"
<cfreeman@scetv.org> wrote:

>Hello,
>
>I have a 2001 TJ with very faded fender flares.

Someone here suggested Penetrol a while back. I tried it and it
really works!

Mark
'98 TJ
'98 XJ

Re: 303 Protectant and Jeep TJ Fender Flares
 

On Wed, 11 Aug 2004 12:45:01 -0400, "Campbell Freeman"
<cfreeman@scetv.org> wrote:

>Hello,
>
>I have a 2001 TJ with very faded fender flares.

Someone here suggested Penetrol a while back. I tried it and it
really works!

Mark
'98 TJ
'98 XJ

Re: 303 Protectant and Jeep TJ Fender Flares
 

On Wed, 11 Aug 2004 12:45:01 -0400, "Campbell Freeman"
<cfreeman@scetv.org> wrote:

>Hello,
>
>I have a 2001 TJ with very faded fender flares.

Someone here suggested Penetrol a while back. I tried it and it
really works!

Mark
'98 TJ
'98 XJ

Re: 303 Protectant and Jeep TJ Fender Flares
 

>
>People have had luck with a heat gun.

I used a heat gun on mine and I would not do that again. I ended up with much
blacker flares, but with green spotches on them that seem permanent.

I put Penetrol on mine a couple months ago and they have stayed black... or at
least muck blacker than they were. it was easy and cheap. You can get it at
paint or home improvement stores in the paint department.

-jeff

Re: 303 Protectant and Jeep TJ Fender Flares
 

>
>People have had luck with a heat gun.

I used a heat gun on mine and I would not do that again. I ended up with much
blacker flares, but with green spotches on them that seem permanent.

I put Penetrol on mine a couple months ago and they have stayed black... or at
least muck blacker than they were. it was easy and cheap. You can get it at
paint or home improvement stores in the paint department.

-jeff

Re: 303 Protectant and Jeep TJ Fender Flares
 

>
>People have had luck with a heat gun.

I used a heat gun on mine and I would not do that again. I ended up with much
blacker flares, but with green spotches on them that seem permanent.

I put Penetrol on mine a couple months ago and they have stayed black... or at
least muck blacker than they were. it was easy and cheap. You can get it at
paint or home improvement stores in the paint department.

-jeff