130k & 258 kaput :(
09-12-2005, 02:54 PM
#1
Guest
Posts: n/a
130k & 258 kaput :(
Hello folks. It's been a long time since I've posted in here, and now
I've got some bad news (for me @ least). Two Sunday's ago I checked all
fluids as I do every Sunday and fuelled up for the week. The oil was 1/2
qt. low but looked good since I had recently changed it so I added 1/2.
On my way home from topping off the gas tank the motor turned 130 miles.
Monday morning on my way to work a _major_ knocking sound appeared and
the Jeep started 'shaking'. I figured it was done and I would try to
'limp' it home since there isn't much traffic on the road at 4:00 a.m..
I went about 2 miles and decided to stop and call a tow truck. I checked
the oil and it was at the full line on the dipstick, but real black. I
tried to move it in the driveway but now it won't start. So did it blow?
Maybe timing went and piston hit valve? It has had a lower end knock
since I've had it, and that it what seemed to get loud. Any ideas before
I start to disassemble? Oops almost forgot, '89 Wrangler 258
I've got some bad news (for me @ least). Two Sunday's ago I checked all
fluids as I do every Sunday and fuelled up for the week. The oil was 1/2
qt. low but looked good since I had recently changed it so I added 1/2.
On my way home from topping off the gas tank the motor turned 130 miles.
Monday morning on my way to work a _major_ knocking sound appeared and
the Jeep started 'shaking'. I figured it was done and I would try to
'limp' it home since there isn't much traffic on the road at 4:00 a.m..
I went about 2 miles and decided to stop and call a tow truck. I checked
the oil and it was at the full line on the dipstick, but real black. I
tried to move it in the driveway but now it won't start. So did it blow?
Maybe timing went and piston hit valve? It has had a lower end knock
since I've had it, and that it what seemed to get loud. Any ideas before
I start to disassemble? Oops almost forgot, '89 Wrangler 258
09-12-2005, 04:22 PM
#2
Guest
Posts: n/a
Re: 130k & 258 kaput :(
Hi Daniel,
Will not restart is a broken piston. Buy a used engine from a wreck
is the least expensive way to go.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Daniel Paisley wrote:
>
> Hello folks. It's been a long time since I've posted in here, and now
> I've got some bad news (for me @ least). Two Sunday's ago I checked all
> fluids as I do every Sunday and fuelled up for the week. The oil was 1/2
> qt. low but looked good since I had recently changed it so I added 1/2.
> On my way home from topping off the gas tank the motor turned 130 miles.
> Monday morning on my way to work a _major_ knocking sound appeared and
> the Jeep started 'shaking'. I figured it was done and I would try to
> 'limp' it home since there isn't much traffic on the road at 4:00 a.m..
> I went about 2 miles and decided to stop and call a tow truck. I checked
> the oil and it was at the full line on the dipstick, but real black. I
> tried to move it in the driveway but now it won't start. So did it blow?
> Maybe timing went and piston hit valve? It has had a lower end knock
> since I've had it, and that it what seemed to get loud. Any ideas before
> I start to disassemble? Oops almost forgot, '89 Wrangler 258
Will not restart is a broken piston. Buy a used engine from a wreck
is the least expensive way to go.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Daniel Paisley wrote:
>
> Hello folks. It's been a long time since I've posted in here, and now
> I've got some bad news (for me @ least). Two Sunday's ago I checked all
> fluids as I do every Sunday and fuelled up for the week. The oil was 1/2
> qt. low but looked good since I had recently changed it so I added 1/2.
> On my way home from topping off the gas tank the motor turned 130 miles.
> Monday morning on my way to work a _major_ knocking sound appeared and
> the Jeep started 'shaking'. I figured it was done and I would try to
> 'limp' it home since there isn't much traffic on the road at 4:00 a.m..
> I went about 2 miles and decided to stop and call a tow truck. I checked
> the oil and it was at the full line on the dipstick, but real black. I
> tried to move it in the driveway but now it won't start. So did it blow?
> Maybe timing went and piston hit valve? It has had a lower end knock
> since I've had it, and that it what seemed to get loud. Any ideas before
> I start to disassemble? Oops almost forgot, '89 Wrangler 258
09-12-2005, 04:22 PM
#3
Guest
Posts: n/a
Re: 130k & 258 kaput :(
Hi Daniel,
Will not restart is a broken piston. Buy a used engine from a wreck
is the least expensive way to go.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Daniel Paisley wrote:
>
> Hello folks. It's been a long time since I've posted in here, and now
> I've got some bad news (for me @ least). Two Sunday's ago I checked all
> fluids as I do every Sunday and fuelled up for the week. The oil was 1/2
> qt. low but looked good since I had recently changed it so I added 1/2.
> On my way home from topping off the gas tank the motor turned 130 miles.
> Monday morning on my way to work a _major_ knocking sound appeared and
> the Jeep started 'shaking'. I figured it was done and I would try to
> 'limp' it home since there isn't much traffic on the road at 4:00 a.m..
> I went about 2 miles and decided to stop and call a tow truck. I checked
> the oil and it was at the full line on the dipstick, but real black. I
> tried to move it in the driveway but now it won't start. So did it blow?
> Maybe timing went and piston hit valve? It has had a lower end knock
> since I've had it, and that it what seemed to get loud. Any ideas before
> I start to disassemble? Oops almost forgot, '89 Wrangler 258
Will not restart is a broken piston. Buy a used engine from a wreck
is the least expensive way to go.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Daniel Paisley wrote:
>
> Hello folks. It's been a long time since I've posted in here, and now
> I've got some bad news (for me @ least). Two Sunday's ago I checked all
> fluids as I do every Sunday and fuelled up for the week. The oil was 1/2
> qt. low but looked good since I had recently changed it so I added 1/2.
> On my way home from topping off the gas tank the motor turned 130 miles.
> Monday morning on my way to work a _major_ knocking sound appeared and
> the Jeep started 'shaking'. I figured it was done and I would try to
> 'limp' it home since there isn't much traffic on the road at 4:00 a.m..
> I went about 2 miles and decided to stop and call a tow truck. I checked
> the oil and it was at the full line on the dipstick, but real black. I
> tried to move it in the driveway but now it won't start. So did it blow?
> Maybe timing went and piston hit valve? It has had a lower end knock
> since I've had it, and that it what seemed to get loud. Any ideas before
> I start to disassemble? Oops almost forgot, '89 Wrangler 258
09-12-2005, 04:22 PM
#4
Guest
Posts: n/a
Re: 130k & 258 kaput :(
Hi Daniel,
Will not restart is a broken piston. Buy a used engine from a wreck
is the least expensive way to go.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Daniel Paisley wrote:
>
> Hello folks. It's been a long time since I've posted in here, and now
> I've got some bad news (for me @ least). Two Sunday's ago I checked all
> fluids as I do every Sunday and fuelled up for the week. The oil was 1/2
> qt. low but looked good since I had recently changed it so I added 1/2.
> On my way home from topping off the gas tank the motor turned 130 miles.
> Monday morning on my way to work a _major_ knocking sound appeared and
> the Jeep started 'shaking'. I figured it was done and I would try to
> 'limp' it home since there isn't much traffic on the road at 4:00 a.m..
> I went about 2 miles and decided to stop and call a tow truck. I checked
> the oil and it was at the full line on the dipstick, but real black. I
> tried to move it in the driveway but now it won't start. So did it blow?
> Maybe timing went and piston hit valve? It has had a lower end knock
> since I've had it, and that it what seemed to get loud. Any ideas before
> I start to disassemble? Oops almost forgot, '89 Wrangler 258
Will not restart is a broken piston. Buy a used engine from a wreck
is the least expensive way to go.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Daniel Paisley wrote:
>
> Hello folks. It's been a long time since I've posted in here, and now
> I've got some bad news (for me @ least). Two Sunday's ago I checked all
> fluids as I do every Sunday and fuelled up for the week. The oil was 1/2
> qt. low but looked good since I had recently changed it so I added 1/2.
> On my way home from topping off the gas tank the motor turned 130 miles.
> Monday morning on my way to work a _major_ knocking sound appeared and
> the Jeep started 'shaking'. I figured it was done and I would try to
> 'limp' it home since there isn't much traffic on the road at 4:00 a.m..
> I went about 2 miles and decided to stop and call a tow truck. I checked
> the oil and it was at the full line on the dipstick, but real black. I
> tried to move it in the driveway but now it won't start. So did it blow?
> Maybe timing went and piston hit valve? It has had a lower end knock
> since I've had it, and that it what seemed to get loud. Any ideas before
> I start to disassemble? Oops almost forgot, '89 Wrangler 258
09-12-2005, 04:22 PM
#5
Guest
Posts: n/a
Re: 130k & 258 kaput :(
Hi Daniel,
Will not restart is a broken piston. Buy a used engine from a wreck
is the least expensive way to go.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Daniel Paisley wrote:
>
> Hello folks. It's been a long time since I've posted in here, and now
> I've got some bad news (for me @ least). Two Sunday's ago I checked all
> fluids as I do every Sunday and fuelled up for the week. The oil was 1/2
> qt. low but looked good since I had recently changed it so I added 1/2.
> On my way home from topping off the gas tank the motor turned 130 miles.
> Monday morning on my way to work a _major_ knocking sound appeared and
> the Jeep started 'shaking'. I figured it was done and I would try to
> 'limp' it home since there isn't much traffic on the road at 4:00 a.m..
> I went about 2 miles and decided to stop and call a tow truck. I checked
> the oil and it was at the full line on the dipstick, but real black. I
> tried to move it in the driveway but now it won't start. So did it blow?
> Maybe timing went and piston hit valve? It has had a lower end knock
> since I've had it, and that it what seemed to get loud. Any ideas before
> I start to disassemble? Oops almost forgot, '89 Wrangler 258
Will not restart is a broken piston. Buy a used engine from a wreck
is the least expensive way to go.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Daniel Paisley wrote:
>
> Hello folks. It's been a long time since I've posted in here, and now
> I've got some bad news (for me @ least). Two Sunday's ago I checked all
> fluids as I do every Sunday and fuelled up for the week. The oil was 1/2
> qt. low but looked good since I had recently changed it so I added 1/2.
> On my way home from topping off the gas tank the motor turned 130 miles.
> Monday morning on my way to work a _major_ knocking sound appeared and
> the Jeep started 'shaking'. I figured it was done and I would try to
> 'limp' it home since there isn't much traffic on the road at 4:00 a.m..
> I went about 2 miles and decided to stop and call a tow truck. I checked
> the oil and it was at the full line on the dipstick, but real black. I
> tried to move it in the driveway but now it won't start. So did it blow?
> Maybe timing went and piston hit valve? It has had a lower end knock
> since I've had it, and that it what seemed to get loud. Any ideas before
> I start to disassemble? Oops almost forgot, '89 Wrangler 258
09-12-2005, 04:37 PM
#6
Guest
Posts: n/a
Re: 130k & 258 kaput :(
It is very difficult from here to tell you what has failed. I do not think
the 258 is an Interference Motor, which means I do not think the pistons and
valves can collide.
You'll need to pull the motor and take the oil pan off to know what to do
next. You could have bent a pushrod or something easy ... Of course, the
pushrods are seen by taking the valve cover off.
"Daniel Paisley" <dmpazlee@webtv.net> wrote in message
news:15425-4325CEF0-252@storefull-3111.bay.webtv.net...
> Hello folks. It's been a long time since I've posted in here, and now
> I've got some bad news (for me @ least). Two Sunday's ago I checked all
> fluids as I do every Sunday and fuelled up for the week. The oil was 1/2
> qt. low but looked good since I had recently changed it so I added 1/2.
> On my way home from topping off the gas tank the motor turned 130 miles.
> Monday morning on my way to work a _major_ knocking sound appeared and
> the Jeep started 'shaking'. I figured it was done and I would try to
> 'limp' it home since there isn't much traffic on the road at 4:00 a.m..
> I went about 2 miles and decided to stop and call a tow truck. I checked
> the oil and it was at the full line on the dipstick, but real black. I
> tried to move it in the driveway but now it won't start. So did it blow?
> Maybe timing went and piston hit valve? It has had a lower end knock
> since I've had it, and that it what seemed to get loud. Any ideas before
> I start to disassemble? Oops almost forgot, '89 Wrangler 258
>
the 258 is an Interference Motor, which means I do not think the pistons and
valves can collide.
You'll need to pull the motor and take the oil pan off to know what to do
next. You could have bent a pushrod or something easy ... Of course, the
pushrods are seen by taking the valve cover off.
"Daniel Paisley" <dmpazlee@webtv.net> wrote in message
news:15425-4325CEF0-252@storefull-3111.bay.webtv.net...
> Hello folks. It's been a long time since I've posted in here, and now
> I've got some bad news (for me @ least). Two Sunday's ago I checked all
> fluids as I do every Sunday and fuelled up for the week. The oil was 1/2
> qt. low but looked good since I had recently changed it so I added 1/2.
> On my way home from topping off the gas tank the motor turned 130 miles.
> Monday morning on my way to work a _major_ knocking sound appeared and
> the Jeep started 'shaking'. I figured it was done and I would try to
> 'limp' it home since there isn't much traffic on the road at 4:00 a.m..
> I went about 2 miles and decided to stop and call a tow truck. I checked
> the oil and it was at the full line on the dipstick, but real black. I
> tried to move it in the driveway but now it won't start. So did it blow?
> Maybe timing went and piston hit valve? It has had a lower end knock
> since I've had it, and that it what seemed to get loud. Any ideas before
> I start to disassemble? Oops almost forgot, '89 Wrangler 258
>
09-12-2005, 04:37 PM
#7
Guest
Posts: n/a
Re: 130k & 258 kaput :(
It is very difficult from here to tell you what has failed. I do not think
the 258 is an Interference Motor, which means I do not think the pistons and
valves can collide.
You'll need to pull the motor and take the oil pan off to know what to do
next. You could have bent a pushrod or something easy ... Of course, the
pushrods are seen by taking the valve cover off.
"Daniel Paisley" <dmpazlee@webtv.net> wrote in message
news:15425-4325CEF0-252@storefull-3111.bay.webtv.net...
> Hello folks. It's been a long time since I've posted in here, and now
> I've got some bad news (for me @ least). Two Sunday's ago I checked all
> fluids as I do every Sunday and fuelled up for the week. The oil was 1/2
> qt. low but looked good since I had recently changed it so I added 1/2.
> On my way home from topping off the gas tank the motor turned 130 miles.
> Monday morning on my way to work a _major_ knocking sound appeared and
> the Jeep started 'shaking'. I figured it was done and I would try to
> 'limp' it home since there isn't much traffic on the road at 4:00 a.m..
> I went about 2 miles and decided to stop and call a tow truck. I checked
> the oil and it was at the full line on the dipstick, but real black. I
> tried to move it in the driveway but now it won't start. So did it blow?
> Maybe timing went and piston hit valve? It has had a lower end knock
> since I've had it, and that it what seemed to get loud. Any ideas before
> I start to disassemble? Oops almost forgot, '89 Wrangler 258
>
the 258 is an Interference Motor, which means I do not think the pistons and
valves can collide.
You'll need to pull the motor and take the oil pan off to know what to do
next. You could have bent a pushrod or something easy ... Of course, the
pushrods are seen by taking the valve cover off.
"Daniel Paisley" <dmpazlee@webtv.net> wrote in message
news:15425-4325CEF0-252@storefull-3111.bay.webtv.net...
> Hello folks. It's been a long time since I've posted in here, and now
> I've got some bad news (for me @ least). Two Sunday's ago I checked all
> fluids as I do every Sunday and fuelled up for the week. The oil was 1/2
> qt. low but looked good since I had recently changed it so I added 1/2.
> On my way home from topping off the gas tank the motor turned 130 miles.
> Monday morning on my way to work a _major_ knocking sound appeared and
> the Jeep started 'shaking'. I figured it was done and I would try to
> 'limp' it home since there isn't much traffic on the road at 4:00 a.m..
> I went about 2 miles and decided to stop and call a tow truck. I checked
> the oil and it was at the full line on the dipstick, but real black. I
> tried to move it in the driveway but now it won't start. So did it blow?
> Maybe timing went and piston hit valve? It has had a lower end knock
> since I've had it, and that it what seemed to get loud. Any ideas before
> I start to disassemble? Oops almost forgot, '89 Wrangler 258
>
09-12-2005, 04:37 PM
#8
Guest
Posts: n/a
Re: 130k & 258 kaput :(
It is very difficult from here to tell you what has failed. I do not think
the 258 is an Interference Motor, which means I do not think the pistons and
valves can collide.
You'll need to pull the motor and take the oil pan off to know what to do
next. You could have bent a pushrod or something easy ... Of course, the
pushrods are seen by taking the valve cover off.
"Daniel Paisley" <dmpazlee@webtv.net> wrote in message
news:15425-4325CEF0-252@storefull-3111.bay.webtv.net...
> Hello folks. It's been a long time since I've posted in here, and now
> I've got some bad news (for me @ least). Two Sunday's ago I checked all
> fluids as I do every Sunday and fuelled up for the week. The oil was 1/2
> qt. low but looked good since I had recently changed it so I added 1/2.
> On my way home from topping off the gas tank the motor turned 130 miles.
> Monday morning on my way to work a _major_ knocking sound appeared and
> the Jeep started 'shaking'. I figured it was done and I would try to
> 'limp' it home since there isn't much traffic on the road at 4:00 a.m..
> I went about 2 miles and decided to stop and call a tow truck. I checked
> the oil and it was at the full line on the dipstick, but real black. I
> tried to move it in the driveway but now it won't start. So did it blow?
> Maybe timing went and piston hit valve? It has had a lower end knock
> since I've had it, and that it what seemed to get loud. Any ideas before
> I start to disassemble? Oops almost forgot, '89 Wrangler 258
>
the 258 is an Interference Motor, which means I do not think the pistons and
valves can collide.
You'll need to pull the motor and take the oil pan off to know what to do
next. You could have bent a pushrod or something easy ... Of course, the
pushrods are seen by taking the valve cover off.
"Daniel Paisley" <dmpazlee@webtv.net> wrote in message
news:15425-4325CEF0-252@storefull-3111.bay.webtv.net...
> Hello folks. It's been a long time since I've posted in here, and now
> I've got some bad news (for me @ least). Two Sunday's ago I checked all
> fluids as I do every Sunday and fuelled up for the week. The oil was 1/2
> qt. low but looked good since I had recently changed it so I added 1/2.
> On my way home from topping off the gas tank the motor turned 130 miles.
> Monday morning on my way to work a _major_ knocking sound appeared and
> the Jeep started 'shaking'. I figured it was done and I would try to
> 'limp' it home since there isn't much traffic on the road at 4:00 a.m..
> I went about 2 miles and decided to stop and call a tow truck. I checked
> the oil and it was at the full line on the dipstick, but real black. I
> tried to move it in the driveway but now it won't start. So did it blow?
> Maybe timing went and piston hit valve? It has had a lower end knock
> since I've had it, and that it what seemed to get loud. Any ideas before
> I start to disassemble? Oops almost forgot, '89 Wrangler 258
>
09-12-2005, 04:37 PM
#9
Guest
Posts: n/a
Re: 130k & 258 kaput :(
It is very difficult from here to tell you what has failed. I do not think
the 258 is an Interference Motor, which means I do not think the pistons and
valves can collide.
You'll need to pull the motor and take the oil pan off to know what to do
next. You could have bent a pushrod or something easy ... Of course, the
pushrods are seen by taking the valve cover off.
"Daniel Paisley" <dmpazlee@webtv.net> wrote in message
news:15425-4325CEF0-252@storefull-3111.bay.webtv.net...
> Hello folks. It's been a long time since I've posted in here, and now
> I've got some bad news (for me @ least). Two Sunday's ago I checked all
> fluids as I do every Sunday and fuelled up for the week. The oil was 1/2
> qt. low but looked good since I had recently changed it so I added 1/2.
> On my way home from topping off the gas tank the motor turned 130 miles.
> Monday morning on my way to work a _major_ knocking sound appeared and
> the Jeep started 'shaking'. I figured it was done and I would try to
> 'limp' it home since there isn't much traffic on the road at 4:00 a.m..
> I went about 2 miles and decided to stop and call a tow truck. I checked
> the oil and it was at the full line on the dipstick, but real black. I
> tried to move it in the driveway but now it won't start. So did it blow?
> Maybe timing went and piston hit valve? It has had a lower end knock
> since I've had it, and that it what seemed to get loud. Any ideas before
> I start to disassemble? Oops almost forgot, '89 Wrangler 258
>
the 258 is an Interference Motor, which means I do not think the pistons and
valves can collide.
You'll need to pull the motor and take the oil pan off to know what to do
next. You could have bent a pushrod or something easy ... Of course, the
pushrods are seen by taking the valve cover off.
"Daniel Paisley" <dmpazlee@webtv.net> wrote in message
news:15425-4325CEF0-252@storefull-3111.bay.webtv.net...
> Hello folks. It's been a long time since I've posted in here, and now
> I've got some bad news (for me @ least). Two Sunday's ago I checked all
> fluids as I do every Sunday and fuelled up for the week. The oil was 1/2
> qt. low but looked good since I had recently changed it so I added 1/2.
> On my way home from topping off the gas tank the motor turned 130 miles.
> Monday morning on my way to work a _major_ knocking sound appeared and
> the Jeep started 'shaking'. I figured it was done and I would try to
> 'limp' it home since there isn't much traffic on the road at 4:00 a.m..
> I went about 2 miles and decided to stop and call a tow truck. I checked
> the oil and it was at the full line on the dipstick, but real black. I
> tried to move it in the driveway but now it won't start. So did it blow?
> Maybe timing went and piston hit valve? It has had a lower end knock
> since I've had it, and that it what seemed to get loud. Any ideas before
> I start to disassemble? Oops almost forgot, '89 Wrangler 258
>
09-12-2005, 04:52 PM
#10
Guest
Posts: n/a
Re: 130k & 258 kaput :(
The timing chain normally lasts the engine's life, but you can just
remove the distributor cap and see if the rotor is turning to verify
it. The rotor also should just be past #1 post when #1 piston is at
firing TDC or opposite if on exhaust TDC. I have seen an 89 with an
exploded plastic timing gear before and no other damage happened.
That would tell you if you have to open the front or bottom at least.
Long term knock that got worse, my guess is a rod bearing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Daniel Paisley wrote:
>
> Hello folks. It's been a long time since I've posted in here, and now
> I've got some bad news (for me @ least). Two Sunday's ago I checked all
> fluids as I do every Sunday and fuelled up for the week. The oil was 1/2
> qt. low but looked good since I had recently changed it so I added 1/2.
> On my way home from topping off the gas tank the motor turned 130 miles.
> Monday morning on my way to work a _major_ knocking sound appeared and
> the Jeep started 'shaking'. I figured it was done and I would try to
> 'limp' it home since there isn't much traffic on the road at 4:00 a.m..
> I went about 2 miles and decided to stop and call a tow truck. I checked
> the oil and it was at the full line on the dipstick, but real black. I
> tried to move it in the driveway but now it won't start. So did it blow?
> Maybe timing went and piston hit valve? It has had a lower end knock
> since I've had it, and that it what seemed to get loud. Any ideas before
> I start to disassemble? Oops almost forgot, '89 Wrangler 258
remove the distributor cap and see if the rotor is turning to verify
it. The rotor also should just be past #1 post when #1 piston is at
firing TDC or opposite if on exhaust TDC. I have seen an 89 with an
exploded plastic timing gear before and no other damage happened.
That would tell you if you have to open the front or bottom at least.
Long term knock that got worse, my guess is a rod bearing.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Daniel Paisley wrote:
>
> Hello folks. It's been a long time since I've posted in here, and now
> I've got some bad news (for me @ least). Two Sunday's ago I checked all
> fluids as I do every Sunday and fuelled up for the week. The oil was 1/2
> qt. low but looked good since I had recently changed it so I added 1/2.
> On my way home from topping off the gas tank the motor turned 130 miles.
> Monday morning on my way to work a _major_ knocking sound appeared and
> the Jeep started 'shaking'. I figured it was done and I would try to
> 'limp' it home since there isn't much traffic on the road at 4:00 a.m..
> I went about 2 miles and decided to stop and call a tow truck. I checked
> the oil and it was at the full line on the dipstick, but real black. I
> tried to move it in the driveway but now it won't start. So did it blow?
> Maybe timing went and piston hit valve? It has had a lower end knock
> since I've had it, and that it what seemed to get loud. Any ideas before
> I start to disassemble? Oops almost forgot, '89 Wrangler 258