Jeep Grand Cherokee Forum Forum for all ZJ (1993 - 1998), WJ (1999-2004) and WK (Since 05) Grand Cherokee owners.

dana 03 front axle

Old Jun 20, 2011 | 10:23 AM
  #1  
bcbueller's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2011
Posts: 6
From: bc
West dana 03 front axle

does anyone know if the front axle from a 2001 zj will fit a 1998 zj , i know both are dana 30 with 373 ratio
Old Jun 20, 2011 | 03:58 PM
  #2  
Mr White's Avatar
Administrator
iTrader: (1)
 
Joined: Feb 2008
Posts: 1,601
From: Quebec
Default Re: dana 03 front axle

I would yes - are they both coil springs or leaf springs so you don't have a reprosition the spring seats but if you want a quick reply call Chrsyler and ask them. If "CrazyWJ242" see this post I am sure he will be able to give you a straight answer.
Old Jun 20, 2011 | 04:00 PM
  #3  
oldfart's Avatar
Senior Member
 
Joined: May 2010
Posts: 640
From: quebec
Default Re: dana 03 front axle

2001 should be a wj. The steering arrangement and track bar are different. Some of them have a different bolt pattern also. You can make anything fit onto anything but I doubt this would be a direct bolt in.
Old Jun 20, 2011 | 07:13 PM
  #4  
CrazyWJ242's Avatar
Moderator
 
Joined: Feb 2009
Posts: 889
From: New Brunswick
Default Re: dana 03 front axle

haha, yeah i've owned both ZJ's and WJ's... they are not drop in replacements with one another... but as mentioned you can make just about anything fit...

the main pieces that are different are the Knuckles... ZJ's attach the drag link to the inner tie rod, and steering stabilizer attaches to this aswell... WJ's use a totally different system... the drag link to the right knuckle, the tie rods are attached to one another... this is the preferred knuckle for offroaders as if you flip the ends, you gain a few inches of clearance, you can use a beefier inner tie rod...

Now i cant for the life of me remember if the inner C's are different sizes (this would affect the CV Joints that you would use... but of course you can make anything fit)

swaybar links are a bit different, and i think the trackbar and steering stabilizers are basically in the same locations... i never pulled a tape measure on these so i dont know, but their relatively in the same location... ZJ axle only bolts to the swaybar link on one side...

And if its a 2001 XJ... im not sure what axle it uses lol...
Old Jun 20, 2011 | 10:11 PM
  #5  
bcbueller's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2011
Posts: 6
From: bc
Default Re: dana 03 front axle

well that solves that . thanks for the insight . just if anyone wants there is one off a 2001 jeep grand cherokee on craigslist in langley bc
Old Jun 22, 2011 | 12:10 AM
  #6  
04WJGuy's Avatar
Senior Member
 
Joined: Nov 2008
Posts: 1,216
From: Somewhere between NE and SW Alberta
Default Re: dana 03 front axle

C's are slightly different size and the spring plates are different sizes to as the springs on the ZJ are smaller.
Old Oct 14, 2011 | 01:12 AM
  #7  
bcbueller's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2011
Posts: 6
From: bc
Default Re: dana 03 front axle

thank you for your help , finally took the zj into the shop . diff was fine ..... parts changed are . right hub , front brakes and rotors , 4 shocks all around new hitch with boss ramp carrier and rear airbags to do this .....
Attached Thumbnails dana 03 front axle-surrey-20111011-00011.jpg  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
2500bogger
Jeep & 4x4 Items For Sale
3
May 5, 2009 08:29 AM
kodiakid@gmail.com
Jeep Mailing List
32
Mar 10, 2006 01:10 PM
Henrik
Jeep Mailing List
28
Jun 17, 2004 04:06 AM
Steve
Jeep Mailing List
0
Nov 18, 2003 05:00 PM
Foot Loose
Jeep Mailing List
3
Jul 25, 2003 02:28 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -4. The time now is 01:21 PM.

Page generated in 0.07228 seconds with 16 queries