Dana 25 front axle, lubricate
05-22-2004, 02:46 PM
#1
Guest
Posts: n/a
Dana 25 front axle, lubricate
Hi
I have recently bought a M38A1 from 1960, equipped with a Rover 3.5L V8
engine.
It have Dana 25 axel in front and Dana 44 in the rear.
I'm trying to find all the places to lubricate with the greasegun but I
don't seem to find any "greasenipples" at the front axle?
Hope someone here can help me out, there are not so many old jeep's here in
Denmark
Henrik
M38A1, Rover V8
I have recently bought a M38A1 from 1960, equipped with a Rover 3.5L V8
engine.
It have Dana 25 axel in front and Dana 44 in the rear.
I'm trying to find all the places to lubricate with the greasegun but I
don't seem to find any "greasenipples" at the front axle?
Hope someone here can help me out, there are not so many old jeep's here in
Denmark
Henrik
M38A1, Rover V8
05-22-2004, 03:43 PM
#2
Guest
Posts: n/a
Re: Dana 25 front axle, lubricate
Put your glasses on. As the chart says:
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
the steering knuckles have been converted from ninety weight oil to
grease that you will put in the fill plug to protect the axle universal
joints.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Henrik wrote:
>
> Hi
>
> I have recently bought a M38A1 from 1960, equipped with a Rover 3.5L V8
> engine.
>
> It have Dana 25 axel in front and Dana 44 in the rear.
>
> I'm trying to find all the places to lubricate with the greasegun but I
> don't seem to find any "greasenipples" at the front axle?
>
> Hope someone here can help me out, there are not so many old jeep's here in
> Denmark
>
> Henrik
> M38A1, Rover V8
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
the steering knuckles have been converted from ninety weight oil to
grease that you will put in the fill plug to protect the axle universal
joints.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Henrik wrote:
>
> Hi
>
> I have recently bought a M38A1 from 1960, equipped with a Rover 3.5L V8
> engine.
>
> It have Dana 25 axel in front and Dana 44 in the rear.
>
> I'm trying to find all the places to lubricate with the greasegun but I
> don't seem to find any "greasenipples" at the front axle?
>
> Hope someone here can help me out, there are not so many old jeep's here in
> Denmark
>
> Henrik
> M38A1, Rover V8
05-22-2004, 03:43 PM
#3
Guest
Posts: n/a
Re: Dana 25 front axle, lubricate
Put your glasses on. As the chart says:
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
the steering knuckles have been converted from ninety weight oil to
grease that you will put in the fill plug to protect the axle universal
joints.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Henrik wrote:
>
> Hi
>
> I have recently bought a M38A1 from 1960, equipped with a Rover 3.5L V8
> engine.
>
> It have Dana 25 axel in front and Dana 44 in the rear.
>
> I'm trying to find all the places to lubricate with the greasegun but I
> don't seem to find any "greasenipples" at the front axle?
>
> Hope someone here can help me out, there are not so many old jeep's here in
> Denmark
>
> Henrik
> M38A1, Rover V8
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
the steering knuckles have been converted from ninety weight oil to
grease that you will put in the fill plug to protect the axle universal
joints.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Henrik wrote:
>
> Hi
>
> I have recently bought a M38A1 from 1960, equipped with a Rover 3.5L V8
> engine.
>
> It have Dana 25 axel in front and Dana 44 in the rear.
>
> I'm trying to find all the places to lubricate with the greasegun but I
> don't seem to find any "greasenipples" at the front axle?
>
> Hope someone here can help me out, there are not so many old jeep's here in
> Denmark
>
> Henrik
> M38A1, Rover V8
05-22-2004, 03:43 PM
#4
Guest
Posts: n/a
Re: Dana 25 front axle, lubricate
Put your glasses on. As the chart says:
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
the steering knuckles have been converted from ninety weight oil to
grease that you will put in the fill plug to protect the axle universal
joints.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Henrik wrote:
>
> Hi
>
> I have recently bought a M38A1 from 1960, equipped with a Rover 3.5L V8
> engine.
>
> It have Dana 25 axel in front and Dana 44 in the rear.
>
> I'm trying to find all the places to lubricate with the greasegun but I
> don't seem to find any "greasenipples" at the front axle?
>
> Hope someone here can help me out, there are not so many old jeep's here in
> Denmark
>
> Henrik
> M38A1, Rover V8
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
the steering knuckles have been converted from ninety weight oil to
grease that you will put in the fill plug to protect the axle universal
joints.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Henrik wrote:
>
> Hi
>
> I have recently bought a M38A1 from 1960, equipped with a Rover 3.5L V8
> engine.
>
> It have Dana 25 axel in front and Dana 44 in the rear.
>
> I'm trying to find all the places to lubricate with the greasegun but I
> don't seem to find any "greasenipples" at the front axle?
>
> Hope someone here can help me out, there are not so many old jeep's here in
> Denmark
>
> Henrik
> M38A1, Rover V8
05-22-2004, 03:43 PM
#5
Guest
Posts: n/a
Re: Dana 25 front axle, lubricate
Put your glasses on. As the chart says:
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
the steering knuckles have been converted from ninety weight oil to
grease that you will put in the fill plug to protect the axle universal
joints.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Henrik wrote:
>
> Hi
>
> I have recently bought a M38A1 from 1960, equipped with a Rover 3.5L V8
> engine.
>
> It have Dana 25 axel in front and Dana 44 in the rear.
>
> I'm trying to find all the places to lubricate with the greasegun but I
> don't seem to find any "greasenipples" at the front axle?
>
> Hope someone here can help me out, there are not so many old jeep's here in
> Denmark
>
> Henrik
> M38A1, Rover V8
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
the steering knuckles have been converted from ninety weight oil to
grease that you will put in the fill plug to protect the axle universal
joints.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Henrik wrote:
>
> Hi
>
> I have recently bought a M38A1 from 1960, equipped with a Rover 3.5L V8
> engine.
>
> It have Dana 25 axel in front and Dana 44 in the rear.
>
> I'm trying to find all the places to lubricate with the greasegun but I
> don't seem to find any "greasenipples" at the front axle?
>
> Hope someone here can help me out, there are not so many old jeep's here in
> Denmark
>
> Henrik
> M38A1, Rover V8
05-23-2004, 01:24 PM
#6
Guest
Posts: n/a
Re: Dana 25 front axle, lubricate
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40AFAD51.33CCC780@***.net...
> Put your glasses on. As the chart says:
>
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> the steering knuckles have been converted from ninety weight oil to
> grease that you will put in the fill plug to protect the axle universal
> joints.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
Ok, I found the fill plug, thank you for the excellent link, that lead me to
even more information about lubricants used in the steering knuckles.
Now that I was looking at the front axle I found another possible fill plug?
It is a bolt, looks like about 6mm, fitted in the axle about 15cm from the
steering knuckles, in an angle of maybe 15 degrees.
Any idea what these bolts do?
Henrik
M38A1, Rover V8
05-23-2004, 01:24 PM
#7
Guest
Posts: n/a
Re: Dana 25 front axle, lubricate
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40AFAD51.33CCC780@***.net...
> Put your glasses on. As the chart says:
>
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> the steering knuckles have been converted from ninety weight oil to
> grease that you will put in the fill plug to protect the axle universal
> joints.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
Ok, I found the fill plug, thank you for the excellent link, that lead me to
even more information about lubricants used in the steering knuckles.
Now that I was looking at the front axle I found another possible fill plug?
It is a bolt, looks like about 6mm, fitted in the axle about 15cm from the
steering knuckles, in an angle of maybe 15 degrees.
Any idea what these bolts do?
Henrik
M38A1, Rover V8
05-23-2004, 01:24 PM
#8
Guest
Posts: n/a
Re: Dana 25 front axle, lubricate
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40AFAD51.33CCC780@***.net...
> Put your glasses on. As the chart says:
>
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> the steering knuckles have been converted from ninety weight oil to
> grease that you will put in the fill plug to protect the axle universal
> joints.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
Ok, I found the fill plug, thank you for the excellent link, that lead me to
even more information about lubricants used in the steering knuckles.
Now that I was looking at the front axle I found another possible fill plug?
It is a bolt, looks like about 6mm, fitted in the axle about 15cm from the
steering knuckles, in an angle of maybe 15 degrees.
Any idea what these bolts do?
Henrik
M38A1, Rover V8
05-23-2004, 01:24 PM
#9
Guest
Posts: n/a
Re: Dana 25 front axle, lubricate
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40AFAD51.33CCC780@***.net...
> Put your glasses on. As the chart says:
>
http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> the steering knuckles have been converted from ninety weight oil to
> grease that you will put in the fill plug to protect the axle universal
> joints.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
Ok, I found the fill plug, thank you for the excellent link, that lead me to
even more information about lubricants used in the steering knuckles.
Now that I was looking at the front axle I found another possible fill plug?
It is a bolt, looks like about 6mm, fitted in the axle about 15cm from the
steering knuckles, in an angle of maybe 15 degrees.
Any idea what these bolts do?
Henrik
M38A1, Rover V8
05-23-2004, 04:23 PM
#10
Guest
Posts: n/a
Re: Dana 25 front axle, lubricate
Hi Henrik,
Fifteen degrees from vertical may be the breather, that maybe the
hose fell off. Maybe you can tell me what's it's near in this exploded
view: http://----------.com/dana30/axleparts.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Henrik wrote:
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40AFAD51.33CCC780@***.net...
> > Put your glasses on. As the chart says:
> >
> http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > the steering knuckles have been converted from ninety weight oil to
> > grease that you will put in the fill plug to protect the axle universal
> > joints.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
>
> Ok, I found the fill plug, thank you for the excellent link, that lead me to
> even more information about lubricants used in the steering knuckles.
>
> Now that I was looking at the front axle I found another possible fill plug?
> It is a bolt, looks like about 6mm, fitted in the axle about 15cm from the
> steering knuckles, in an angle of maybe 15 degrees.
> Any idea what these bolts do?
>
> Henrik
> M38A1, Rover V8
Fifteen degrees from vertical may be the breather, that maybe the
hose fell off. Maybe you can tell me what's it's near in this exploded
view: http://----------.com/dana30/axleparts.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Henrik wrote:
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40AFAD51.33CCC780@***.net...
> > Put your glasses on. As the chart says:
> >
> http://www.apple.queensu.ca/CJ3B/Pho...ationChart.gif
> > the steering knuckles have been converted from ninety weight oil to
> > grease that you will put in the fill plug to protect the axle universal
> > joints.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
>
> Ok, I found the fill plug, thank you for the excellent link, that lead me to
> even more information about lubricants used in the steering knuckles.
>
> Now that I was looking at the front axle I found another possible fill plug?
> It is a bolt, looks like about 6mm, fitted in the axle about 15cm from the
> steering knuckles, in an angle of maybe 15 degrees.
> Any idea what these bolts do?
>
> Henrik
> M38A1, Rover V8