Manifold pressure off MAP sensor?
Guest
Posts: n/a
Manifold pressure off MAP sensor?
Can a regular old MAP sensor easily be able to be used to drive a
manifold pressure gauge? What common analog auto gauge is easiest to
use, IF you want it to read "correctly" (i.e 30" approx. when the
engine is not turning, "low" (10, or whatever) at idle? "Auto" gauges
are calibrated assbackwards. I want MANIFOLD PRESSURE not VACUUM, and
preferably with the high end to the right like normal gauges.
manifold pressure gauge? What common analog auto gauge is easiest to
use, IF you want it to read "correctly" (i.e 30" approx. when the
engine is not turning, "low" (10, or whatever) at idle? "Auto" gauges
are calibrated assbackwards. I want MANIFOLD PRESSURE not VACUUM, and
preferably with the high end to the right like normal gauges.
Guest
Posts: n/a
Re: Manifold pressure off MAP sensor?
Why not buy the actual gauge used, like this testing:
http://www.----------.com/vacuumgauge.jpg Like the oil, temperature,
vacuum gauges every hot rodder has on their machine, sold by
http://www.autometer.com/ http://www.stewartwarner.com/
God Bless America, Bill O|||||||O
mailto:--------------------
Bret Ludwig wrote:
>
> Can a regular old MAP sensor easily be able to be used to drive a
> manifold pressure gauge? What common analog auto gauge is easiest to
> use, IF you want it to read "correctly" (i.e 30" approx. when the
> engine is not turning, "low" (10, or whatever) at idle? "Auto" gauges
> are calibrated assbackwards. I want MANIFOLD PRESSURE not VACUUM, and
> preferably with the high end to the right like normal gauges.
http://www.----------.com/vacuumgauge.jpg Like the oil, temperature,
vacuum gauges every hot rodder has on their machine, sold by
http://www.autometer.com/ http://www.stewartwarner.com/
God Bless America, Bill O|||||||O
mailto:--------------------
Bret Ludwig wrote:
>
> Can a regular old MAP sensor easily be able to be used to drive a
> manifold pressure gauge? What common analog auto gauge is easiest to
> use, IF you want it to read "correctly" (i.e 30" approx. when the
> engine is not turning, "low" (10, or whatever) at idle? "Auto" gauges
> are calibrated assbackwards. I want MANIFOLD PRESSURE not VACUUM, and
> preferably with the high end to the right like normal gauges.
Guest
Posts: n/a
Re: Manifold pressure off MAP sensor?
Why not buy the actual gauge used, like this testing:
http://www.----------.com/vacuumgauge.jpg Like the oil, temperature,
vacuum gauges every hot rodder has on their machine, sold by
http://www.autometer.com/ http://www.stewartwarner.com/
God Bless America, Bill O|||||||O
mailto:--------------------
Bret Ludwig wrote:
>
> Can a regular old MAP sensor easily be able to be used to drive a
> manifold pressure gauge? What common analog auto gauge is easiest to
> use, IF you want it to read "correctly" (i.e 30" approx. when the
> engine is not turning, "low" (10, or whatever) at idle? "Auto" gauges
> are calibrated assbackwards. I want MANIFOLD PRESSURE not VACUUM, and
> preferably with the high end to the right like normal gauges.
http://www.----------.com/vacuumgauge.jpg Like the oil, temperature,
vacuum gauges every hot rodder has on their machine, sold by
http://www.autometer.com/ http://www.stewartwarner.com/
God Bless America, Bill O|||||||O
mailto:--------------------
Bret Ludwig wrote:
>
> Can a regular old MAP sensor easily be able to be used to drive a
> manifold pressure gauge? What common analog auto gauge is easiest to
> use, IF you want it to read "correctly" (i.e 30" approx. when the
> engine is not turning, "low" (10, or whatever) at idle? "Auto" gauges
> are calibrated assbackwards. I want MANIFOLD PRESSURE not VACUUM, and
> preferably with the high end to the right like normal gauges.
Guest
Posts: n/a
Re: Manifold pressure off MAP sensor?
Why not buy the actual gauge used, like this testing:
http://www.----------.com/vacuumgauge.jpg Like the oil, temperature,
vacuum gauges every hot rodder has on their machine, sold by
http://www.autometer.com/ http://www.stewartwarner.com/
God Bless America, Bill O|||||||O
mailto:--------------------
Bret Ludwig wrote:
>
> Can a regular old MAP sensor easily be able to be used to drive a
> manifold pressure gauge? What common analog auto gauge is easiest to
> use, IF you want it to read "correctly" (i.e 30" approx. when the
> engine is not turning, "low" (10, or whatever) at idle? "Auto" gauges
> are calibrated assbackwards. I want MANIFOLD PRESSURE not VACUUM, and
> preferably with the high end to the right like normal gauges.
http://www.----------.com/vacuumgauge.jpg Like the oil, temperature,
vacuum gauges every hot rodder has on their machine, sold by
http://www.autometer.com/ http://www.stewartwarner.com/
God Bless America, Bill O|||||||O
mailto:--------------------
Bret Ludwig wrote:
>
> Can a regular old MAP sensor easily be able to be used to drive a
> manifold pressure gauge? What common analog auto gauge is easiest to
> use, IF you want it to read "correctly" (i.e 30" approx. when the
> engine is not turning, "low" (10, or whatever) at idle? "Auto" gauges
> are calibrated assbackwards. I want MANIFOLD PRESSURE not VACUUM, and
> preferably with the high end to the right like normal gauges.
Guest
Posts: n/a
Re: Manifold pressure off MAP sensor?
L.W.(Bill) ------ III did pass the time by typing:
> Why not buy the actual gauge used, like this testing:
> http://www.----------.com/vacuumgauge.jpg Like the oil, temperature,
> vacuum gauges every hot rodder has on their machine, sold by
> http://www.autometer.com/ http://www.stewartwarner.com/
Like this? :)
http://revbeergoggles.com/gauge.html
> Bret Ludwig wrote:
>>
>> Can a regular old MAP sensor easily be able to be used to drive a
>> manifold pressure gauge? What common analog auto gauge is easiest to
>> use, IF you want it to read "correctly" (i.e 30" approx. when the
>> engine is not turning, "low" (10, or whatever) at idle? "Auto" gauges
>> are calibrated assbackwards. I want MANIFOLD PRESSURE not VACUUM, and
>> preferably with the high end to the right like normal gauges.
> Why not buy the actual gauge used, like this testing:
> http://www.----------.com/vacuumgauge.jpg Like the oil, temperature,
> vacuum gauges every hot rodder has on their machine, sold by
> http://www.autometer.com/ http://www.stewartwarner.com/
Like this? :)
http://revbeergoggles.com/gauge.html
> Bret Ludwig wrote:
>>
>> Can a regular old MAP sensor easily be able to be used to drive a
>> manifold pressure gauge? What common analog auto gauge is easiest to
>> use, IF you want it to read "correctly" (i.e 30" approx. when the
>> engine is not turning, "low" (10, or whatever) at idle? "Auto" gauges
>> are calibrated assbackwards. I want MANIFOLD PRESSURE not VACUUM, and
>> preferably with the high end to the right like normal gauges.
Guest
Posts: n/a
Re: Manifold pressure off MAP sensor?
L.W.(Bill) ------ III did pass the time by typing:
> Why not buy the actual gauge used, like this testing:
> http://www.----------.com/vacuumgauge.jpg Like the oil, temperature,
> vacuum gauges every hot rodder has on their machine, sold by
> http://www.autometer.com/ http://www.stewartwarner.com/
Like this? :)
http://revbeergoggles.com/gauge.html
> Bret Ludwig wrote:
>>
>> Can a regular old MAP sensor easily be able to be used to drive a
>> manifold pressure gauge? What common analog auto gauge is easiest to
>> use, IF you want it to read "correctly" (i.e 30" approx. when the
>> engine is not turning, "low" (10, or whatever) at idle? "Auto" gauges
>> are calibrated assbackwards. I want MANIFOLD PRESSURE not VACUUM, and
>> preferably with the high end to the right like normal gauges.
> Why not buy the actual gauge used, like this testing:
> http://www.----------.com/vacuumgauge.jpg Like the oil, temperature,
> vacuum gauges every hot rodder has on their machine, sold by
> http://www.autometer.com/ http://www.stewartwarner.com/
Like this? :)
http://revbeergoggles.com/gauge.html
> Bret Ludwig wrote:
>>
>> Can a regular old MAP sensor easily be able to be used to drive a
>> manifold pressure gauge? What common analog auto gauge is easiest to
>> use, IF you want it to read "correctly" (i.e 30" approx. when the
>> engine is not turning, "low" (10, or whatever) at idle? "Auto" gauges
>> are calibrated assbackwards. I want MANIFOLD PRESSURE not VACUUM, and
>> preferably with the high end to the right like normal gauges.
Guest
Posts: n/a
Re: Manifold pressure off MAP sensor?
L.W.(Bill) ------ III did pass the time by typing:
> Why not buy the actual gauge used, like this testing:
> http://www.----------.com/vacuumgauge.jpg Like the oil, temperature,
> vacuum gauges every hot rodder has on their machine, sold by
> http://www.autometer.com/ http://www.stewartwarner.com/
Like this? :)
http://revbeergoggles.com/gauge.html
> Bret Ludwig wrote:
>>
>> Can a regular old MAP sensor easily be able to be used to drive a
>> manifold pressure gauge? What common analog auto gauge is easiest to
>> use, IF you want it to read "correctly" (i.e 30" approx. when the
>> engine is not turning, "low" (10, or whatever) at idle? "Auto" gauges
>> are calibrated assbackwards. I want MANIFOLD PRESSURE not VACUUM, and
>> preferably with the high end to the right like normal gauges.
> Why not buy the actual gauge used, like this testing:
> http://www.----------.com/vacuumgauge.jpg Like the oil, temperature,
> vacuum gauges every hot rodder has on their machine, sold by
> http://www.autometer.com/ http://www.stewartwarner.com/
Like this? :)
http://revbeergoggles.com/gauge.html
> Bret Ludwig wrote:
>>
>> Can a regular old MAP sensor easily be able to be used to drive a
>> manifold pressure gauge? What common analog auto gauge is easiest to
>> use, IF you want it to read "correctly" (i.e 30" approx. when the
>> engine is not turning, "low" (10, or whatever) at idle? "Auto" gauges
>> are calibrated assbackwards. I want MANIFOLD PRESSURE not VACUUM, and
>> preferably with the high end to the right like normal gauges.
Guest
Posts: n/a
Re: Manifold pressure off MAP sensor?
Hi Doug,
I did look through your site, knowing your car is blown. I'm glad
it wasn't a snake! The new stock trucks have them going up the
windshield pillar. Like I thought you were designing.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Like this? :)
> http://revbeergoggles.com/gauge.html
I did look through your site, knowing your car is blown. I'm glad
it wasn't a snake! The new stock trucks have them going up the
windshield pillar. Like I thought you were designing.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Like this? :)
> http://revbeergoggles.com/gauge.html
Guest
Posts: n/a
Re: Manifold pressure off MAP sensor?
Hi Doug,
I did look through your site, knowing your car is blown. I'm glad
it wasn't a snake! The new stock trucks have them going up the
windshield pillar. Like I thought you were designing.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Like this? :)
> http://revbeergoggles.com/gauge.html
I did look through your site, knowing your car is blown. I'm glad
it wasn't a snake! The new stock trucks have them going up the
windshield pillar. Like I thought you were designing.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Like this? :)
> http://revbeergoggles.com/gauge.html
Guest
Posts: n/a
Re: Manifold pressure off MAP sensor?
Hi Doug,
I did look through your site, knowing your car is blown. I'm glad
it wasn't a snake! The new stock trucks have them going up the
windshield pillar. Like I thought you were designing.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Like this? :)
> http://revbeergoggles.com/gauge.html
I did look through your site, knowing your car is blown. I'm glad
it wasn't a snake! The new stock trucks have them going up the
windshield pillar. Like I thought you were designing.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
DougW wrote:
>
> Like this? :)
> http://revbeergoggles.com/gauge.html