AMC20 1 Peice Axle install
Guest
Posts: n/a
AMC20 1 Peice Axle install
I am in the middle of a 1-Piece axle upgrade (after I spun the end of the 2
piece) on my AMC20, on a 83 CJ-7, but I have a question. I am about to take
the axle into a shop to have the bearings pressed onto the axle. So far I
feel like I understand how all of this fits together, but I am missing one
concept. What in the world keeps the axle shaft inside the axle housing???
What is going to stop it from pulling apart? Is that press fit enough to
hold it all together, because that is all that the retaining plate can
possible hold against.
piece) on my AMC20, on a 83 CJ-7, but I have a question. I am about to take
the axle into a shop to have the bearings pressed onto the axle. So far I
feel like I understand how all of this fits together, but I am missing one
concept. What in the world keeps the axle shaft inside the axle housing???
What is going to stop it from pulling apart? Is that press fit enough to
hold it all together, because that is all that the retaining plate can
possible hold against.
Guest
Posts: n/a
Re: AMC20 1 Peice Axle install
Yup.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Fletcher wrote:
>
> I am in the middle of a 1-Piece axle upgrade (after I spun the end of the 2
> piece) on my AMC20, on a 83 CJ-7, but I have a question. I am about to take
> the axle into a shop to have the bearings pressed onto the axle. So far I
> feel like I understand how all of this fits together, but I am missing one
> concept. What in the world keeps the axle shaft inside the axle housing???
> What is going to stop it from pulling apart? Is that press fit enough to
> hold it all together, because that is all that the retaining plate can
> possible hold against.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Fletcher wrote:
>
> I am in the middle of a 1-Piece axle upgrade (after I spun the end of the 2
> piece) on my AMC20, on a 83 CJ-7, but I have a question. I am about to take
> the axle into a shop to have the bearings pressed onto the axle. So far I
> feel like I understand how all of this fits together, but I am missing one
> concept. What in the world keeps the axle shaft inside the axle housing???
> What is going to stop it from pulling apart? Is that press fit enough to
> hold it all together, because that is all that the retaining plate can
> possible hold against.
Guest
Posts: n/a
Re: AMC20 1 Peice Axle install
Yup.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Fletcher wrote:
>
> I am in the middle of a 1-Piece axle upgrade (after I spun the end of the 2
> piece) on my AMC20, on a 83 CJ-7, but I have a question. I am about to take
> the axle into a shop to have the bearings pressed onto the axle. So far I
> feel like I understand how all of this fits together, but I am missing one
> concept. What in the world keeps the axle shaft inside the axle housing???
> What is going to stop it from pulling apart? Is that press fit enough to
> hold it all together, because that is all that the retaining plate can
> possible hold against.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Fletcher wrote:
>
> I am in the middle of a 1-Piece axle upgrade (after I spun the end of the 2
> piece) on my AMC20, on a 83 CJ-7, but I have a question. I am about to take
> the axle into a shop to have the bearings pressed onto the axle. So far I
> feel like I understand how all of this fits together, but I am missing one
> concept. What in the world keeps the axle shaft inside the axle housing???
> What is going to stop it from pulling apart? Is that press fit enough to
> hold it all together, because that is all that the retaining plate can
> possible hold against.
Guest
Posts: n/a
Re: AMC20 1 Peice Axle install
Yup.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Fletcher wrote:
>
> I am in the middle of a 1-Piece axle upgrade (after I spun the end of the 2
> piece) on my AMC20, on a 83 CJ-7, but I have a question. I am about to take
> the axle into a shop to have the bearings pressed onto the axle. So far I
> feel like I understand how all of this fits together, but I am missing one
> concept. What in the world keeps the axle shaft inside the axle housing???
> What is going to stop it from pulling apart? Is that press fit enough to
> hold it all together, because that is all that the retaining plate can
> possible hold against.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Fletcher wrote:
>
> I am in the middle of a 1-Piece axle upgrade (after I spun the end of the 2
> piece) on my AMC20, on a 83 CJ-7, but I have a question. I am about to take
> the axle into a shop to have the bearings pressed onto the axle. So far I
> feel like I understand how all of this fits together, but I am missing one
> concept. What in the world keeps the axle shaft inside the axle housing???
> What is going to stop it from pulling apart? Is that press fit enough to
> hold it all together, because that is all that the retaining plate can
> possible hold against.
Guest
Posts: n/a
Re: AMC20 1 Peice Axle install
Peice or Piece. Spell it however you want. Can you see my public education
shining through?
"Fletcher" <no@mail.com> wrote in message
news:GTnSb.5878$455.1066@fe15.usenetserver.com...
> I am in the middle of a 1-Piece axle upgrade (after I spun the end of the
2
> piece) on my AMC20, on a 83 CJ-7, but I have a question. I am about to
take
> the axle into a shop to have the bearings pressed onto the axle. So far I
> feel like I understand how all of this fits together, but I am missing one
> concept. What in the world keeps the axle shaft inside the axle
housing???
> What is going to stop it from pulling apart? Is that press fit enough to
> hold it all together, because that is all that the retaining plate can
> possible hold against.
>
>
>
>
shining through?
"Fletcher" <no@mail.com> wrote in message
news:GTnSb.5878$455.1066@fe15.usenetserver.com...
> I am in the middle of a 1-Piece axle upgrade (after I spun the end of the
2
> piece) on my AMC20, on a 83 CJ-7, but I have a question. I am about to
take
> the axle into a shop to have the bearings pressed onto the axle. So far I
> feel like I understand how all of this fits together, but I am missing one
> concept. What in the world keeps the axle shaft inside the axle
housing???
> What is going to stop it from pulling apart? Is that press fit enough to
> hold it all together, because that is all that the retaining plate can
> possible hold against.
>
>
>
>
Guest
Posts: n/a
Re: AMC20 1 Peice Axle install
Peice or Piece. Spell it however you want. Can you see my public education
shining through?
"Fletcher" <no@mail.com> wrote in message
news:GTnSb.5878$455.1066@fe15.usenetserver.com...
> I am in the middle of a 1-Piece axle upgrade (after I spun the end of the
2
> piece) on my AMC20, on a 83 CJ-7, but I have a question. I am about to
take
> the axle into a shop to have the bearings pressed onto the axle. So far I
> feel like I understand how all of this fits together, but I am missing one
> concept. What in the world keeps the axle shaft inside the axle
housing???
> What is going to stop it from pulling apart? Is that press fit enough to
> hold it all together, because that is all that the retaining plate can
> possible hold against.
>
>
>
>
shining through?
"Fletcher" <no@mail.com> wrote in message
news:GTnSb.5878$455.1066@fe15.usenetserver.com...
> I am in the middle of a 1-Piece axle upgrade (after I spun the end of the
2
> piece) on my AMC20, on a 83 CJ-7, but I have a question. I am about to
take
> the axle into a shop to have the bearings pressed onto the axle. So far I
> feel like I understand how all of this fits together, but I am missing one
> concept. What in the world keeps the axle shaft inside the axle
housing???
> What is going to stop it from pulling apart? Is that press fit enough to
> hold it all together, because that is all that the retaining plate can
> possible hold against.
>
>
>
>
Guest
Posts: n/a
Re: AMC20 1 Peice Axle install
Peice or Piece. Spell it however you want. Can you see my public education
shining through?
"Fletcher" <no@mail.com> wrote in message
news:GTnSb.5878$455.1066@fe15.usenetserver.com...
> I am in the middle of a 1-Piece axle upgrade (after I spun the end of the
2
> piece) on my AMC20, on a 83 CJ-7, but I have a question. I am about to
take
> the axle into a shop to have the bearings pressed onto the axle. So far I
> feel like I understand how all of this fits together, but I am missing one
> concept. What in the world keeps the axle shaft inside the axle
housing???
> What is going to stop it from pulling apart? Is that press fit enough to
> hold it all together, because that is all that the retaining plate can
> possible hold against.
>
>
>
>
shining through?
"Fletcher" <no@mail.com> wrote in message
news:GTnSb.5878$455.1066@fe15.usenetserver.com...
> I am in the middle of a 1-Piece axle upgrade (after I spun the end of the
2
> piece) on my AMC20, on a 83 CJ-7, but I have a question. I am about to
take
> the axle into a shop to have the bearings pressed onto the axle. So far I
> feel like I understand how all of this fits together, but I am missing one
> concept. What in the world keeps the axle shaft inside the axle
housing???
> What is going to stop it from pulling apart? Is that press fit enough to
> hold it all together, because that is all that the retaining plate can
> possible hold against.
>
>
>
>
Guest
Posts: n/a
Re: AMC20 1 Peice Axle install
Is that pressed bearing holding on my wheel a week point? Have those ever
come off after lots of use? How come the idea of a friction fitting holding
my wheel makes me nervous?
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:401A150C.4F123BC1@***.net...
> Yup.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Fletcher wrote:
> >
> > I am in the middle of a 1-Piece axle upgrade (after I spun the end of
the 2
> > piece) on my AMC20, on a 83 CJ-7, but I have a question. I am about to
take
> > the axle into a shop to have the bearings pressed onto the axle. So far
I
> > feel like I understand how all of this fits together, but I am missing
one
> > concept. What in the world keeps the axle shaft inside the axle
housing???
> > What is going to stop it from pulling apart? Is that press fit enough
to
> > hold it all together, because that is all that the retaining plate can
> > possible hold against.
come off after lots of use? How come the idea of a friction fitting holding
my wheel makes me nervous?
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:401A150C.4F123BC1@***.net...
> Yup.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Fletcher wrote:
> >
> > I am in the middle of a 1-Piece axle upgrade (after I spun the end of
the 2
> > piece) on my AMC20, on a 83 CJ-7, but I have a question. I am about to
take
> > the axle into a shop to have the bearings pressed onto the axle. So far
I
> > feel like I understand how all of this fits together, but I am missing
one
> > concept. What in the world keeps the axle shaft inside the axle
housing???
> > What is going to stop it from pulling apart? Is that press fit enough
to
> > hold it all together, because that is all that the retaining plate can
> > possible hold against.
Guest
Posts: n/a
Re: AMC20 1 Peice Axle install
Is that pressed bearing holding on my wheel a week point? Have those ever
come off after lots of use? How come the idea of a friction fitting holding
my wheel makes me nervous?
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:401A150C.4F123BC1@***.net...
> Yup.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Fletcher wrote:
> >
> > I am in the middle of a 1-Piece axle upgrade (after I spun the end of
the 2
> > piece) on my AMC20, on a 83 CJ-7, but I have a question. I am about to
take
> > the axle into a shop to have the bearings pressed onto the axle. So far
I
> > feel like I understand how all of this fits together, but I am missing
one
> > concept. What in the world keeps the axle shaft inside the axle
housing???
> > What is going to stop it from pulling apart? Is that press fit enough
to
> > hold it all together, because that is all that the retaining plate can
> > possible hold against.
come off after lots of use? How come the idea of a friction fitting holding
my wheel makes me nervous?
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:401A150C.4F123BC1@***.net...
> Yup.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Fletcher wrote:
> >
> > I am in the middle of a 1-Piece axle upgrade (after I spun the end of
the 2
> > piece) on my AMC20, on a 83 CJ-7, but I have a question. I am about to
take
> > the axle into a shop to have the bearings pressed onto the axle. So far
I
> > feel like I understand how all of this fits together, but I am missing
one
> > concept. What in the world keeps the axle shaft inside the axle
housing???
> > What is going to stop it from pulling apart? Is that press fit enough
to
> > hold it all together, because that is all that the retaining plate can
> > possible hold against.
Guest
Posts: n/a
Re: AMC20 1 Peice Axle install
Is that pressed bearing holding on my wheel a week point? Have those ever
come off after lots of use? How come the idea of a friction fitting holding
my wheel makes me nervous?
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:401A150C.4F123BC1@***.net...
> Yup.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Fletcher wrote:
> >
> > I am in the middle of a 1-Piece axle upgrade (after I spun the end of
the 2
> > piece) on my AMC20, on a 83 CJ-7, but I have a question. I am about to
take
> > the axle into a shop to have the bearings pressed onto the axle. So far
I
> > feel like I understand how all of this fits together, but I am missing
one
> > concept. What in the world keeps the axle shaft inside the axle
housing???
> > What is going to stop it from pulling apart? Is that press fit enough
to
> > hold it all together, because that is all that the retaining plate can
> > possible hold against.
come off after lots of use? How come the idea of a friction fitting holding
my wheel makes me nervous?
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:401A150C.4F123BC1@***.net...
> Yup.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Fletcher wrote:
> >
> > I am in the middle of a 1-Piece axle upgrade (after I spun the end of
the 2
> > piece) on my AMC20, on a 83 CJ-7, but I have a question. I am about to
take
> > the axle into a shop to have the bearings pressed onto the axle. So far
I
> > feel like I understand how all of this fits together, but I am missing
one
> > concept. What in the world keeps the axle shaft inside the axle
housing???
> > What is going to stop it from pulling apart? Is that press fit enough
to
> > hold it all together, because that is all that the retaining plate can
> > possible hold against.