AMC20 1 Peice Axle install
Guest
Posts: n/a
Re: AMC20 1 Peice Axle install
I'd like to replace the wheel bearings and seals for my one-piece axles
(pretty sure they're mosers with M+M symbol stamped on them) since we're
talking about it. Does anybody have a source for the no-kiddin' bearings
and seals made for these axles? I'd just like some peace of mind so I stop
limping from spinning them.
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
EM60qk 30.447439N 086.628959W
(pretty sure they're mosers with M+M symbol stamped on them) since we're
talking about it. Does anybody have a source for the no-kiddin' bearings
and seals made for these axles? I'd just like some peace of mind so I stop
limping from spinning them.
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
EM60qk 30.447439N 086.628959W
Guest
Posts: n/a
Re: AMC20 1 Peice Axle install
I'd like to replace the wheel bearings and seals for my one-piece axles
(pretty sure they're mosers with M+M symbol stamped on them) since we're
talking about it. Does anybody have a source for the no-kiddin' bearings
and seals made for these axles? I'd just like some peace of mind so I stop
limping from spinning them.
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
EM60qk 30.447439N 086.628959W
(pretty sure they're mosers with M+M symbol stamped on them) since we're
talking about it. Does anybody have a source for the no-kiddin' bearings
and seals made for these axles? I'd just like some peace of mind so I stop
limping from spinning them.
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
EM60qk 30.447439N 086.628959W
Guest
Posts: n/a
Re: AMC20 1 Peice Axle install
I'd like to replace the wheel bearings and seals for my one-piece axles
(pretty sure they're mosers with M+M symbol stamped on them) since we're
talking about it. Does anybody have a source for the no-kiddin' bearings
and seals made for these axles? I'd just like some peace of mind so I stop
limping from spinning them.
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
EM60qk 30.447439N 086.628959W
(pretty sure they're mosers with M+M symbol stamped on them) since we're
talking about it. Does anybody have a source for the no-kiddin' bearings
and seals made for these axles? I'd just like some peace of mind so I stop
limping from spinning them.
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
EM60qk 30.447439N 086.628959W
Guest
Posts: n/a
Re: AMC20 1 Peice Axle install
If these are the semi floaters, learn to pack them with grease. A
Timken bearing, is a Timken bearing, what's wrong with your local parts
store.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Drink wrote:
>
> I'd like to replace the wheel bearings and seals for my one-piece axles
> (pretty sure they're mosers with M+M symbol stamped on them) since we're
> talking about it. Does anybody have a source for the no-kiddin' bearings
> and seals made for these axles? I'd just like some peace of mind so I stop
> limping from spinning them.
> o_o_o_o
> Best Regards, /| ,[_____],
> Jim, WP3JQ |ŻŻŻL --O|||||||O-
> ()_)Ż()_) ŻŻŻŻŻ )_)
> EM60qk 30.447439N 086.628959W
Timken bearing, is a Timken bearing, what's wrong with your local parts
store.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Drink wrote:
>
> I'd like to replace the wheel bearings and seals for my one-piece axles
> (pretty sure they're mosers with M+M symbol stamped on them) since we're
> talking about it. Does anybody have a source for the no-kiddin' bearings
> and seals made for these axles? I'd just like some peace of mind so I stop
> limping from spinning them.
> o_o_o_o
> Best Regards, /| ,[_____],
> Jim, WP3JQ |ŻŻŻL --O|||||||O-
> ()_)Ż()_) ŻŻŻŻŻ )_)
> EM60qk 30.447439N 086.628959W
Guest
Posts: n/a
Re: AMC20 1 Peice Axle install
If these are the semi floaters, learn to pack them with grease. A
Timken bearing, is a Timken bearing, what's wrong with your local parts
store.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Drink wrote:
>
> I'd like to replace the wheel bearings and seals for my one-piece axles
> (pretty sure they're mosers with M+M symbol stamped on them) since we're
> talking about it. Does anybody have a source for the no-kiddin' bearings
> and seals made for these axles? I'd just like some peace of mind so I stop
> limping from spinning them.
> o_o_o_o
> Best Regards, /| ,[_____],
> Jim, WP3JQ |ŻŻŻL --O|||||||O-
> ()_)Ż()_) ŻŻŻŻŻ )_)
> EM60qk 30.447439N 086.628959W
Timken bearing, is a Timken bearing, what's wrong with your local parts
store.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Drink wrote:
>
> I'd like to replace the wheel bearings and seals for my one-piece axles
> (pretty sure they're mosers with M+M symbol stamped on them) since we're
> talking about it. Does anybody have a source for the no-kiddin' bearings
> and seals made for these axles? I'd just like some peace of mind so I stop
> limping from spinning them.
> o_o_o_o
> Best Regards, /| ,[_____],
> Jim, WP3JQ |ŻŻŻL --O|||||||O-
> ()_)Ż()_) ŻŻŻŻŻ )_)
> EM60qk 30.447439N 086.628959W
Guest
Posts: n/a
Re: AMC20 1 Peice Axle install
If these are the semi floaters, learn to pack them with grease. A
Timken bearing, is a Timken bearing, what's wrong with your local parts
store.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Drink wrote:
>
> I'd like to replace the wheel bearings and seals for my one-piece axles
> (pretty sure they're mosers with M+M symbol stamped on them) since we're
> talking about it. Does anybody have a source for the no-kiddin' bearings
> and seals made for these axles? I'd just like some peace of mind so I stop
> limping from spinning them.
> o_o_o_o
> Best Regards, /| ,[_____],
> Jim, WP3JQ |ŻŻŻL --O|||||||O-
> ()_)Ż()_) ŻŻŻŻŻ )_)
> EM60qk 30.447439N 086.628959W
Timken bearing, is a Timken bearing, what's wrong with your local parts
store.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Drink wrote:
>
> I'd like to replace the wheel bearings and seals for my one-piece axles
> (pretty sure they're mosers with M+M symbol stamped on them) since we're
> talking about it. Does anybody have a source for the no-kiddin' bearings
> and seals made for these axles? I'd just like some peace of mind so I stop
> limping from spinning them.
> o_o_o_o
> Best Regards, /| ,[_____],
> Jim, WP3JQ |ŻŻŻL --O|||||||O-
> ()_)Ż()_) ŻŻŻŻŻ )_)
> EM60qk 30.447439N 086.628959W
Guest
Posts: n/a
Re: AMC20 1 Peice Axle install
Hi Bill,
The axle came with a sealed, ball bearing. I think it was made by Green.
Since it was sealed, you don't pack it. It might've lost its lube but the
ball bearings bound on each other and, "blam", I had to change it. I tried
to get the Timken bearing but all I could find in Puerto Rico was crappy
"Chicago Rawhide" and a myriad of others that were wrong or couldn't fit the
inner seals. Even back here in the Florida panhandle, I could only find one
that looked like a correct, quality part. What can I say. It should be
easier.
I'd order from the internet but, until I'm positive it's the correct
bearing and seals, I have to see them first.
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
EM60qk 30.447439N 086.628959W
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:401B1F73.ECC16C9C@***.net...
> If these are the semi floaters, learn to pack them with grease. A
> Timken bearing, is a Timken bearing, what's wrong with your local parts
> store.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Drink wrote:
> >
> > I'd like to replace the wheel bearings and seals for my one-piece
axles
> > (pretty sure they're mosers with M+M symbol stamped on them) since we're
> > talking about it. Does anybody have a source for the no-kiddin'
bearings
> > and seals made for these axles? I'd just like some peace of mind so I
stop
> > limping from spinning them.
> > o_o_o_o
> > Best Regards, /| ,[_____],
> > Jim, WP3JQ |ŻŻŻL --O|||||||O-
> > ()_)Ż()_) ŻŻŻŻŻ )_)
> > EM60qk 30.447439N 086.628959W
The axle came with a sealed, ball bearing. I think it was made by Green.
Since it was sealed, you don't pack it. It might've lost its lube but the
ball bearings bound on each other and, "blam", I had to change it. I tried
to get the Timken bearing but all I could find in Puerto Rico was crappy
"Chicago Rawhide" and a myriad of others that were wrong or couldn't fit the
inner seals. Even back here in the Florida panhandle, I could only find one
that looked like a correct, quality part. What can I say. It should be
easier.
I'd order from the internet but, until I'm positive it's the correct
bearing and seals, I have to see them first.
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
EM60qk 30.447439N 086.628959W
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:401B1F73.ECC16C9C@***.net...
> If these are the semi floaters, learn to pack them with grease. A
> Timken bearing, is a Timken bearing, what's wrong with your local parts
> store.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Drink wrote:
> >
> > I'd like to replace the wheel bearings and seals for my one-piece
axles
> > (pretty sure they're mosers with M+M symbol stamped on them) since we're
> > talking about it. Does anybody have a source for the no-kiddin'
bearings
> > and seals made for these axles? I'd just like some peace of mind so I
stop
> > limping from spinning them.
> > o_o_o_o
> > Best Regards, /| ,[_____],
> > Jim, WP3JQ |ŻŻŻL --O|||||||O-
> > ()_)Ż()_) ŻŻŻŻŻ )_)
> > EM60qk 30.447439N 086.628959W
Guest
Posts: n/a
Re: AMC20 1 Peice Axle install
Hi Bill,
The axle came with a sealed, ball bearing. I think it was made by Green.
Since it was sealed, you don't pack it. It might've lost its lube but the
ball bearings bound on each other and, "blam", I had to change it. I tried
to get the Timken bearing but all I could find in Puerto Rico was crappy
"Chicago Rawhide" and a myriad of others that were wrong or couldn't fit the
inner seals. Even back here in the Florida panhandle, I could only find one
that looked like a correct, quality part. What can I say. It should be
easier.
I'd order from the internet but, until I'm positive it's the correct
bearing and seals, I have to see them first.
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
EM60qk 30.447439N 086.628959W
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:401B1F73.ECC16C9C@***.net...
> If these are the semi floaters, learn to pack them with grease. A
> Timken bearing, is a Timken bearing, what's wrong with your local parts
> store.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Drink wrote:
> >
> > I'd like to replace the wheel bearings and seals for my one-piece
axles
> > (pretty sure they're mosers with M+M symbol stamped on them) since we're
> > talking about it. Does anybody have a source for the no-kiddin'
bearings
> > and seals made for these axles? I'd just like some peace of mind so I
stop
> > limping from spinning them.
> > o_o_o_o
> > Best Regards, /| ,[_____],
> > Jim, WP3JQ |ŻŻŻL --O|||||||O-
> > ()_)Ż()_) ŻŻŻŻŻ )_)
> > EM60qk 30.447439N 086.628959W
The axle came with a sealed, ball bearing. I think it was made by Green.
Since it was sealed, you don't pack it. It might've lost its lube but the
ball bearings bound on each other and, "blam", I had to change it. I tried
to get the Timken bearing but all I could find in Puerto Rico was crappy
"Chicago Rawhide" and a myriad of others that were wrong or couldn't fit the
inner seals. Even back here in the Florida panhandle, I could only find one
that looked like a correct, quality part. What can I say. It should be
easier.
I'd order from the internet but, until I'm positive it's the correct
bearing and seals, I have to see them first.
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
EM60qk 30.447439N 086.628959W
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:401B1F73.ECC16C9C@***.net...
> If these are the semi floaters, learn to pack them with grease. A
> Timken bearing, is a Timken bearing, what's wrong with your local parts
> store.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Drink wrote:
> >
> > I'd like to replace the wheel bearings and seals for my one-piece
axles
> > (pretty sure they're mosers with M+M symbol stamped on them) since we're
> > talking about it. Does anybody have a source for the no-kiddin'
bearings
> > and seals made for these axles? I'd just like some peace of mind so I
stop
> > limping from spinning them.
> > o_o_o_o
> > Best Regards, /| ,[_____],
> > Jim, WP3JQ |ŻŻŻL --O|||||||O-
> > ()_)Ż()_) ŻŻŻŻŻ )_)
> > EM60qk 30.447439N 086.628959W
Guest
Posts: n/a
Re: AMC20 1 Peice Axle install
Hi Bill,
The axle came with a sealed, ball bearing. I think it was made by Green.
Since it was sealed, you don't pack it. It might've lost its lube but the
ball bearings bound on each other and, "blam", I had to change it. I tried
to get the Timken bearing but all I could find in Puerto Rico was crappy
"Chicago Rawhide" and a myriad of others that were wrong or couldn't fit the
inner seals. Even back here in the Florida panhandle, I could only find one
that looked like a correct, quality part. What can I say. It should be
easier.
I'd order from the internet but, until I'm positive it's the correct
bearing and seals, I have to see them first.
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
EM60qk 30.447439N 086.628959W
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:401B1F73.ECC16C9C@***.net...
> If these are the semi floaters, learn to pack them with grease. A
> Timken bearing, is a Timken bearing, what's wrong with your local parts
> store.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Drink wrote:
> >
> > I'd like to replace the wheel bearings and seals for my one-piece
axles
> > (pretty sure they're mosers with M+M symbol stamped on them) since we're
> > talking about it. Does anybody have a source for the no-kiddin'
bearings
> > and seals made for these axles? I'd just like some peace of mind so I
stop
> > limping from spinning them.
> > o_o_o_o
> > Best Regards, /| ,[_____],
> > Jim, WP3JQ |ŻŻŻL --O|||||||O-
> > ()_)Ż()_) ŻŻŻŻŻ )_)
> > EM60qk 30.447439N 086.628959W
The axle came with a sealed, ball bearing. I think it was made by Green.
Since it was sealed, you don't pack it. It might've lost its lube but the
ball bearings bound on each other and, "blam", I had to change it. I tried
to get the Timken bearing but all I could find in Puerto Rico was crappy
"Chicago Rawhide" and a myriad of others that were wrong or couldn't fit the
inner seals. Even back here in the Florida panhandle, I could only find one
that looked like a correct, quality part. What can I say. It should be
easier.
I'd order from the internet but, until I'm positive it's the correct
bearing and seals, I have to see them first.
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
EM60qk 30.447439N 086.628959W
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:401B1F73.ECC16C9C@***.net...
> If these are the semi floaters, learn to pack them with grease. A
> Timken bearing, is a Timken bearing, what's wrong with your local parts
> store.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Drink wrote:
> >
> > I'd like to replace the wheel bearings and seals for my one-piece
axles
> > (pretty sure they're mosers with M+M symbol stamped on them) since we're
> > talking about it. Does anybody have a source for the no-kiddin'
bearings
> > and seals made for these axles? I'd just like some peace of mind so I
stop
> > limping from spinning them.
> > o_o_o_o
> > Best Regards, /| ,[_____],
> > Jim, WP3JQ |ŻŻŻL --O|||||||O-
> > ()_)Ż()_) ŻŻŻŻŻ )_)
> > EM60qk 30.447439N 086.628959W
Guest
Posts: n/a
Re: AMC20 1 Peice Axle install
I went throuigh this with my moser 1 piece axles. They originally came with
sealed "green" ball bearings and after much headache trying to remove the
axles who's bearings had seized into the axle housing I called moser and
they had an upgrade for this axle. The new tapered roller bearings were free
but I had to send them the axles for machining. They had to turn a bit off
of them for the new races to fit. They also told me to tap the axle housing
for grease nipples. Now I can grease my axle bearings and 10 years later
they are still perfect.
"Drink" <drink@gnt.net> wrote in message
news:bvglqd$3cu$1@news.utelfla.com...
> Hi Bill,
> The axle came with a sealed, ball bearing. I think it was made by
Green.
> Since it was sealed, you don't pack it. It might've lost its lube but the
> ball bearings bound on each other and, "blam", I had to change it. I
tried
> to get the Timken bearing but all I could find in Puerto Rico was crappy
> "Chicago Rawhide" and a myriad of others that were wrong or couldn't fit
the
> inner seals. Even back here in the Florida panhandle, I could only find
one
> that looked like a correct, quality part. What can I say. It should be
> easier.
> I'd order from the internet but, until I'm positive it's the correct
> bearing and seals, I have to see them first.
> o_o_o_o
> Best Regards, /| ,[_____],
> Jim, WP3JQ |ŻŻŻL --O|||||||O-
> ()_)Ż()_) ŻŻŻŻŻ )_)
> EM60qk 30.447439N 086.628959W
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:401B1F73.ECC16C9C@***.net...
> > If these are the semi floaters, learn to pack them with grease. A
> > Timken bearing, is a Timken bearing, what's wrong with your local parts
> > store.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Drink wrote:
> > >
> > > I'd like to replace the wheel bearings and seals for my one-piece
> axles
> > > (pretty sure they're mosers with M+M symbol stamped on them) since
we're
> > > talking about it. Does anybody have a source for the no-kiddin'
> bearings
> > > and seals made for these axles? I'd just like some peace of mind so I
> stop
> > > limping from spinning them.
> > > o_o_o_o
> > > Best Regards, /| ,[_____],
> > > Jim, WP3JQ |ŻŻŻL --O|||||||O-
> > > ()_)Ż()_) ŻŻŻŻŻ )_)
> > > EM60qk 30.447439N 086.628959W
>
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.564 / Virus Database: 356 - Release Date: 19/01/2004
sealed "green" ball bearings and after much headache trying to remove the
axles who's bearings had seized into the axle housing I called moser and
they had an upgrade for this axle. The new tapered roller bearings were free
but I had to send them the axles for machining. They had to turn a bit off
of them for the new races to fit. They also told me to tap the axle housing
for grease nipples. Now I can grease my axle bearings and 10 years later
they are still perfect.
"Drink" <drink@gnt.net> wrote in message
news:bvglqd$3cu$1@news.utelfla.com...
> Hi Bill,
> The axle came with a sealed, ball bearing. I think it was made by
Green.
> Since it was sealed, you don't pack it. It might've lost its lube but the
> ball bearings bound on each other and, "blam", I had to change it. I
tried
> to get the Timken bearing but all I could find in Puerto Rico was crappy
> "Chicago Rawhide" and a myriad of others that were wrong or couldn't fit
the
> inner seals. Even back here in the Florida panhandle, I could only find
one
> that looked like a correct, quality part. What can I say. It should be
> easier.
> I'd order from the internet but, until I'm positive it's the correct
> bearing and seals, I have to see them first.
> o_o_o_o
> Best Regards, /| ,[_____],
> Jim, WP3JQ |ŻŻŻL --O|||||||O-
> ()_)Ż()_) ŻŻŻŻŻ )_)
> EM60qk 30.447439N 086.628959W
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:401B1F73.ECC16C9C@***.net...
> > If these are the semi floaters, learn to pack them with grease. A
> > Timken bearing, is a Timken bearing, what's wrong with your local parts
> > store.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Drink wrote:
> > >
> > > I'd like to replace the wheel bearings and seals for my one-piece
> axles
> > > (pretty sure they're mosers with M+M symbol stamped on them) since
we're
> > > talking about it. Does anybody have a source for the no-kiddin'
> bearings
> > > and seals made for these axles? I'd just like some peace of mind so I
> stop
> > > limping from spinning them.
> > > o_o_o_o
> > > Best Regards, /| ,[_____],
> > > Jim, WP3JQ |ŻŻŻL --O|||||||O-
> > > ()_)Ż()_) ŻŻŻŻŻ )_)
> > > EM60qk 30.447439N 086.628959W
>
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.564 / Virus Database: 356 - Release Date: 19/01/2004