just wandering if any one has done it or knows if i should put some paintable bed liner in my jeep or just leave it the way it is with floor mats my jeep is a 05 the paint look good no rust last fall anyways just dont want the classic no floor jeep in 5 or 10 years down the road

 

You can have it undercoated or zibared there are other names for this, they shoot stuff into the door and floor sectors. Here in Quebec Krown for ard $125 I hear is very good.

 

there are tons of products u can use and put on with a roller they will end up being rubberized and nice for cleaning out with a hose.

 

thats what i was looking for something i can do my self keven have you done it is it pricy ?

 

You can buy Herculiner (eBay), Raptor (eBay), all are good products. Google is your friend and you will find TONs of write ups of people who have done it before you.

I have not done mine, though it could be done over a long weekend if your is a DD, if it is not ~ then drying time is the factor and re-installing everything.

Good Luck!!

 

I took my carpet out 2 yrs ago and had the whole inside srayed. Its one of the best things I could have done. No more musty wet carpet/doggy smell, I have not put the plugs back in,wash and drain. Its the way to roll.

 

i did this with my YJ last year, one of the best things ever. I was able to strip my jeep fri night, clean and put on first layer on Sat, and second layer and reinstall by sunday night. I found it to still be a little tacky on Monday morning. Then a few days before the product finally cured and hardened. one quick note, make sure to scratch the paint really well all around, i think this was my downfall. I scratched the floor good and my coating is still solid, but my fenders are starting to flake off a bit where i didn't get the paint scratched up enough to get that right texture for the liner to grab.
I would reccomend, Like mentioned earlier, no more musty, doggy smells.
now a quick pull of the plugs and a spray and she is all cleaned out.

 

gleddy did you spray or did you use a roller and what product did you use

 

I believe the product i used was Duplicolor Truck Bed Liner Kit, i think i caught it on sale at Can Tire for about $90 for the kit, it is a roll on procedure, but the kit comes with rattle can touch-up, which i used in the hard to roll areas (around the rollbar, under the side rails) but it is a roll on procedure. I also used an asphalt undercoating product for my trailor, it also worked well, and hasnt chipped off, but it seems alot heavier and stiffer (but way cheaper). Where the truck bed liner is almost a rubberized material VS the asphalt material of the second product. I prefer the truck bedliner, but both have yet to really dissapoint me.

 

Some good info and suggestions members:)