hintonite

Well i did it now. I was out wheelin on the weekend and seems lke i stripped the splines on the front passenger axle. it was knocking when i turned tight right. i put it up on stands and the passenger wheel would not turn untill you turned right, and then did the jeep tart to jump around as the axle caught a left over spline. Have not pulled it apart but talked to the local driveline company and was told a axle an nest kit will be about $5-600. I geuss this weekend is now filled.

Mr White

iTrader: (1)

Pick up another 30 there a dime a dozen most people tring to get rid of them for bigger ones, try scrap yards first, and local offroading clubs (call them tell them what ur after surely someone knows someone can swing a deal ur way cheap) If you weren't so far I have a 30 w/3.73 and a 35 in my shed.(its a pre-'91 unit that came with a vacuum-operated CAD (axle disconnect) I dumped a complete set of 3.07's and 3.73's about a year ago. Don't pay $500-600 for them unless your looking for d44's

hintonite

Thanks for the info. I spoke with a wrecker yestrerday and they wanted 1350 for a 30 and 1850 for a 40. I will continue to hunt today.

Mr White

iTrader: (1)

Darn why do u live so far away a club member is selling a set or one 30 with 3.07 for tj for $100.. So check around that wrecking yard sure wants to #$%^ you good on that price. Not sure of what year ur jeep is but something to keep in mind.
Try to avoid the pre-'91 units that came with a vacuum-operated CAD (axle disconnect), which split the passenger-side inner axleshaft into two pieces with a coupling in between. It is known that the weakest part of the Dana 30 is the 5-297 Spicer axle U-joints.

hintonite

Well i took it apart today and the it was lke new. That is the diff and axles were. I had a bad left u joint. I replaced both joints and promlem solved. Seems to drive nicer now. i should never trust the mechanics word and should just look for my self. Thanks for the reply.

CrazyWJ242

wooh! lucky you, unfortunate for me, my outer axle tube is bent!

most Dana 44's are over rated. unless its been beefed up. it uses a lot of parts as the Dana 30, aka U Joints, spindles and all that... the Dana 44 is a larger ring, 8.5", a thicker 30 spline axle, and slightly thicker outer wall... other than that it uses the same things as the Dana 30. although this is much better for wheeling around larger tires and aid a locker.

luckily there are Dana 30's for $100 all over... i have yet to find a free one though :( lol

jeepercreeper

I am in need of a d 44 if anyone has one I'm interested.

hintonite

Well the clicking sound is back. I think i might pull it apart and change out all the bearings and throw 4.10 gears in them while i am at it. The click did not start up again for a while. I suspect that it started to make the noise after the assembley grease (in the bearings) mixed in with the oil. I am stumped other then that.

RCV PERFORMANCE

We can make you a set of unbreakable axles. With a lifetime warranty against breakage. We make the strongest front and rear shafts on the planet! We offer the Ultimate Dana 44 Rubicon CV Front Axle Set on our website for $1085.00. If you are looking for something totally custom, we can do that as well. Let me know if anyone has any questions I can answer! Here to help....

RiponredTJ

Might as well post a link to your site. I don't need your products yet but others might.
RCV PERFORMANCE - CUSTOM HIGH STRENGTH CV JOINTS AND AXLES - DRIVELINE SOLUTIONS - HIGH ANGLE CV JOINTS
Rock on!